Most Frequent ISSUES with Can Am Spyder | MartinTheVlogger Can Am Motorcycles

[@MartinTheVlogger]

kzbin.info/door/J-v2UUHYZwJItBKLk9jg7gjoin

[@zouari95]

Hi there problem after winter storage das not want to start even after boosting the battery Any suggestions please thanks

[@MartinTheVlogger]

@@zouari95 hi buddy.. it can be anything,. from dead battery that even boosting will not help - try to use jump start cables or external jumpstart baterry to see if that works. it can be loose cable,. it can be cut cable from mouse etc... its such a wide question... i dont know,. you have asked me like i would ask you: My stomach hurts, do you have any idea what can be the problem???

[@zouari95]

@@MartinTheVlogger it is 2020 man I boosted it work for 15 min then start bibing and come up in the screening (vvs fault ) Then stopped working no more starting

[@chuckkelley5894]

Somehow I can’t get PayPal to work. I’ll try again later

[@MartinTheVlogger]

@@chuckkelley5894 paypal for what Chuck? If you try to support my channel i think i have turned it off because youtube was taking soo much money and i found it not fair for people. You can buy memorabilia from my shop www.martinthevlogger.com/martinthevlogger-souvenirs-memorabilia-canam-ryker-apyder-influencer if you need any help with anything feel free to write me to [e-mail]

[@spyderlyf3]

Rear license plate light on F3 likes to fall off..$60 to replace it and that rear shock is completely trash. All good, valid points and how you ride doesn't seem to matter.

[@MartinTheVlogger]

🤟🤟🤟👌👌👌👌👌👌

[@MrApriliarsv4]

Awesome video mate. On the "Bad Key" issue. It happened to me when I was 600km away from home. The bezel around the key switch can be removed by 1/4 turn clockwise. Then you will see a black ring around the key switch, this is the antenna that reads the key. Lift it so it's closer to the key head and you should be good to go. Hope this helps someone

[@MartinTheVlogger]

Need to colect all these good points ypuou guys are writing. Thanx a lot 👌👌👌👌👌👌

[@robs9324]

My wife's 2014 can am ST has the same problems with losing antifreeze. The clamps they use are awful. All the hoses are leaking around those crap clamps. Her spyder, my mom's 2019, and my aunt's 2017 also has squeaky brakes and the 2009 we used to own had same issue with brakes.

[@MartinTheVlogger]

🤟🤟🤟💯

[@mickeysambor9070]

Hey Martin... great info as always. So many issues that would be funny if not true. Never saw the words Quality Control in the owner’s manual but love my F3. I think the Yugo was the only vehicle to come with more predictable issues! 🤪 Be well, my friend. 🤙

[@MartinTheVlogger]

🤣🤣🤣🤣

[@dutchyvan1669]

Great video Martin you pointed out some very good points

[@MartinTheVlogger]

Thank ypu buddy

[@TeddsPicks]

Actually, what drew me to your channel was because I swapped out the battery with a new one and now my gauge cluster seems to be powerless and it worked before the battery died

[@MartinTheVlogger]

👍

[@terryboyle]

Best video on the known issues that I have found on KZbin. Thank you for your content

[@MartinTheVlogger]

Thank you Sir 🤟🤟🤟👌👌👌🚀🚀🚀

[@arrie1953]

I’m an old mechanic. There were complaints about disc brakes when first deployed. The solution turned out to be a substance was placed between the pad and its backing.

[@MartinTheVlogger]

Its still onping problem. There is only one aftermarket solution that removes brake problem in general. Brp did nothing i am sorry :(

[@arrie1953]

@@MartinTheVlogger I’m not soliciting but a quick search came up with: CRC Disc Brake Quiet forms a water resistant, high temperature film that instantly absorbs vibrations and quiets disc brake noise. For use on the back of non-shimmed disc pads. checkmark Absorbs vibrations checkmark High temperature red film checkmark Stops brake squeals and squeaks checkmark Water resistant There’s many others Placed on the back side of the plate the brake is mounted. Worked for me on classic cars with disc brakes.

[@MartinTheVlogger]

@@arrie1953 everything is great and its awesome to search for solutions,,, buti am sorry but this does not work. Rotors are too small for the weight.. i done this, and it does not work :(((

[@geep5109]

yeah watch that belt tensioner pulley...mine blew out at roughly 18k miles...get the lamonster upgrade!

[@MartinTheVlogger]

🤟🤟🤟🤟🤟🤟🚀🚀🚀🚀🚀

[@PetrusRautenbach]

I have a problem with my 2010 spyder RT. The speedcontrol stopped working after being parked in the garage for a week. Nobody seems to find the fault. A lot of lights go on in the display and driving it like that is a problem it goes into limbmode. What is there to be done. It only has 17000 km on the clock

[@MartinTheVlogger]

Can be anything, from loose battery connector, old batery to fuse, to DESS Key fault... 🤷‍♂️🤷‍♂️🤷‍♂️

[@standupmoto]

👍🇦🇺🦘 Very good information for Spyder owners to put into their maintenance program, I have a massive problem with my F3S I can’t stop riding it !!!

[@MartinTheVlogger]

🤣🤣🤣🤣 its nice that you can still do that at your age 🤪🤪🤪🤣🤣🤣🤣 🚀🤟💯💨🇸🇰🦥 okie now i will stop about your age, i promiss.

[@margelaturo671]

Great video, Buddy! my kind 😁

[@MartinTheVlogger]

Thank you Sir 🤟🤟🤟🚀🚀🚀

[@wmlangley61]

I have a 2015 Can-Am Spyder if three it is leaking oil somewhere I don’t know if it’s the oil filter or the plug but do you have any comments on where those Leaks come from

[@MartinTheVlogger]

Sorry not really :(

[@rogerhoffmanii8799]

Hey Martin, I started putting my bike in neutral when I shut it off because when I park it, at random times it would not crank to start. I thought it might be the brake switch at 1st. Last night I went to start my bike and got nothing (no crank). I noticed the lights on the right side of the handlebar was not lit up. Suddenly they lit up and the bike then would crank and start. Tonight I was out riding and when I got home, I noticed the lights on the right side handle controls were off again. I shut the bike off and attempted to start it back up and got nothing. Have you ever dealt with this? I think I'm losing power to that side which would cut power to the start button.

[@MartinTheVlogger]

Never had this problem and i think it has something to do with some cable being "bad" that bring juicy to that side of the handlebars.m.

[@rogerhoffmanii8799]

Thank you for the reply, I got it figured out. It was a wire at the plug lost contact. All good now

[@MartinTheVlogger]

@@rogerhoffmanii8799 😉😉😉🤟

[@chuckkelley5894]

Today, riding in Colorado across Horsetooth Reservoir, there was a sudden 20 degree temperature drop and light snow flurries began. Approximately 5 miles further across the traction nanny kicked in and slowed the machine down to about 20 MPH. Regardless of my efforts, it wouldn't release until I turn around and headed back in the direction I came. It released almost immediately once I U Turned. Ten minutes back across, I pulled over to send a text. I killed the engine as I did so. When it was time to go the engine wouldn't start. After many failed attempts, it kicked over but gave the Transmission Failure Code. After several attempts...it finally went into gear, but the cornering nanny kicked in and was screwing up the ride home. Anyone ever experience this? Many thanks in advance if so!

[@MartinTheVlogger]

Hey Chuck, yes this is something that i have heard about. But i dont think writting here will help you much. Please try spyderlovers.com or Facebook group of Spyderlovers there will be few folks who has experienced the same. Martin

[@chuckkelley5894]

@@MartinTheVlogger thanks! I tried spyderlovers but no response so far. Never hurts to put it out there! Thx!

[@adnantariq3346]

Hey man, firstly thank you for your content! Love to watch your channel. I have one question, did you say in one of your videos, that the 2017 F-3S Daytona series Spyder has a problem? What was that problem? Thx.

[@MartinTheVlogger]

Nope buddy, i dont recall me saying this. Go and buy Daytona 2017 if you have chance 🤪🤪🤪🤟🤟🤟

[@adnantariq3346]

@@MartinTheVlogger lol, yes sir!

[@PurpleOnThree]

Very good...some issues I can relate to. I am able to open the gas cap but every so often have to use PB Blaster or WD 40 and then it works for awhile. I have a 2018 F3 Limited and had an issue with the parking brake...had to get a new motor for the parking brake...I heard that 2018's had that issue. I also watched Pierre's video on how to get it unstuck. I have a lot of trouble with canceling the turn signal if my turn isn't sharp enough...any tricks for that? I have arthritis in my left thumb so that doesn't help matters any. Unfortunately, we just got the regular Kenda put on but next time will do the upgraded one. Thanks for all your tips. Too bad Can-Am wouldn't talk to you...Stay safe out there! 👍😊🏍️💜

[@MartinTheVlogger]

😁😁😁😁 i am sorry i dont have a trick for turn light signals. I dont use them a lot 😁😁😁😁 it slows me down 😆😆😆🤷‍♂️🤷‍♂️🤷‍♂️🤷‍♂️ as for BRP, naaah its all fine. I find positive things in all negatives that happens, and same here, at least i do not need to do them favours 😉😉😉😉 if you know what i mean

[@saulcantu347]

I HAVE A 2010 SPYDER. SUDDENLY IT WON'T GO OVER 40 MPH. AND THE GEAR SHIFTER WON'T GO PAST 4TH GEAR. HELP

[@MartinTheVlogger]

Well it can be thousand of reasons, your spyder being elder bike it can betransmission, low oil, clutch who knows like this 🤷‍♂️🤷‍♂️🤷‍♂️🤷‍♂️ need to go to service center 💯😉

[@saulcantu347]

@@MartinTheVlogger it's been in the shop for over a month.

[@phantomcruizer]

Why doesn’t the Can Am Spyder come with a “drive shaft” like the Ryker?!

[@MartinTheVlogger]

Noooooo... that is not the best solution. You need downshifting and upshifting.. its ok for ryker but spyders need some extra fun.. plus cvt has a lot of weak points.

[@mikehopkins6675]

2011 RTL DPS

[@scottcullen1389]

Hi Martin, do you carry anything with you incase of a puncture, like a plug or a foam can?

[@MartinTheVlogger]

Hi Scott, Yes i always have this. It has saved few friends tgat has been rYding with me www.martinthevlogger.com/product-page/flat-tire-repair-kit-for-ryker-spyder-Martinthevlogger-CanAm-Accessories-parts

[@scottcullen1389]

@@MartinTheVlogger thank you for the quick reply, iv been watching your videos for awhile now and am hoping to put a deposit down for my first spyder f3s special series next month. A 2022 in manta green 😁

[@MartinTheVlogger]

@@scottcullen1389 Olalaaaaaa... awesome :) let me know when its gonna be real :)

[@scottcullen1389]

@@MartinTheVlogger will do 😁

[@herrmannlewis9376]

Did he say after 4 years he spotted a leak, doesn't he know everything breaks at some point?!

[@MartinTheVlogger]

Hi buddy.. ypu can talk to me directly.. i know everything breaks... but not a hose from radiator just after 4 years 😉😉😉😉

[@motorhead16]

These issues can be also because you beat the crap out of this vehicule when riding? Or may be you unit more prone to issues? Will also my F3 be affected? I usually drive it nicely.

[@MartinTheVlogger]

Silviu, good point. Aaa... mpst of the problems i am mentioning here are common issues for many F3s owners. So its not about me. You may never face them, but if you do, you know what to do or where to look at 😉😉😉🤟🤟🤟🤟

[@sheepdoggiedog]

Number 14 Hand Brake? There are no handbrakes

[@MartinTheVlogger]

Well, there is the main brake that stops the whoke bYke and you need to turn it on before leaving the bYke.. i think it is called handbrake or not? Or parking brake?

[@jseaber]

those plastic side panels you said 120 dollars they're only 12 dollar Usa

[@MartinTheVlogger]

You are right. I have checked that on cycle parts. It went down a lot. But they use to be 120 eur down here :(((( thanx gor letting me know 🤟🤟👌👌👌👌👌

[@ShineBright__]

Fucken sell it or trade in or ......

[@mikestowe6136]

makes me not want to buy one

[@MartinTheVlogger]

Hmmm,,,... its everybodys call of course. But these are minor issues. But yes, these are the typical issues that most of us faced 😉🤘💯 however motorbike industry is not car industry. All bikes have issues and it does not matter 8f you buy bmw, ducati or harley 🤷‍♂️