Most Satisfying Industrial Manufacturing Processes with Modern Machinery.

⏱
00:00 Mass Production Process of Brass Oil-Free Bearings. Bearing Factory in Korea.
15:11 Process of Making Bridge Girders using Rebars. Precast Concrete Factory in Korea.
28:49 Process of Making an Electric Fork Pallet Truck. Logistics Equipment Factory in Korea.
46:47 Mass Production Process of Various Types of Ducts. Duct Factory in Korea.
58:19 Process of Making a Giant Chemical Tank for Purification Using Glass Fibers in Korea Factory.
😀 Thank you for watching our video!
❌ This video does not contain paid advertisements-
🎬 Contact : [e-mail]
- We are conducting free filming for small business owners and SME representatives who are confident in their products.
🎥 Copyright(C) 2023. Mr.Process. all rights reserved.

[@mr.process]

⏱ 00:00 Mass Production Process of Brass Oil-Free Bearings. Bearing Factory in Korea. 15:11 Process of Making Bridge Girders using Rebars. Precast Concrete Factory in Korea. 28:49 Process of Making an Electric Fork Pallet Truck. Logistics Equipment Factory in Korea. 46:47 Mass Production Process of Various Types of Ducts. Duct Factory in Korea. 58:19 Process of Making a Giant Chemical Tank for Purification Using Glass Fibers in Korea Factory.

[@antonmursid2714]

Hai👍👌antonmursid🙏✌👌

[@laivannavong4960]

ມ

[@xijinpig7978]

in china our certificates are all the same. even if performance test fails

[@user-rz6bi6fj9o]

จพี่ก็ว่าทำไมต้องต้องไปหน่อยหน่อยได้ชชชชชชช

[@martinsandel546]

❤

[@wwebtime]

Nice video... No noisy music, no words to watch through, no annoying narrator! Thanx!

[@TedBackus]

i dont know why the people who upload factory videos feel compelled to add that stupid music they always add. i dislike them, so when the video starts, i know its a bad video. if im watching a video about factories, the last thing i want to hear is elevator music

[@thedevilinthecircuit1414]

Graphite plugged bronze bearings. VERY cool!

[@mayakovski]

I love how the small cylinders go into a crate whole, and then come out twice as long and with holes in them. Magic crate.

[@77gravity]

They have also been machined internally and externally, and had the edges chamfered. I WANT THAT CRATE!

[@shrodingerschat2258]

I also love how they take brass tubes, melt them down to make one big brass rod which then gets cut and extruded back into brass tubes again.

[@far_outlook]

Do you know anything about machines?

[@Pow3llMorgan]

imagine going home after a 12 hour shift and all you can hear in your head when you lay down to sleep is the faint but clear monophonic für elise.

[@katyusseneves1590]

Eu ficaria por hs aqui vendo a perfeição desses maquinários👏👏

[@cuba3433]

I love yuo Sur Corea !. Muchas gracias por todas las buenas manufacturas que ustedes producen .

[@galaxiedance3135]

As a Tool & Die Maker, I"ve seen these Brass oil free bearings and bushings but never seen how they're made. One thing most people don't know... brass slivers hurt much more than normal! they really stick in because the edges aren't smooth, they are jagged. Also, drilling brass... it's best to knock off the sharp tip of the drill, actually have a negative angle...cuts much better, a sharp tip will want to grab. Strange but actually works extremely well like that!

[@jacksonlefteye]

one of the craziest sensations i've ever experienced is getting stabbed in the hands/fingers with the icicle-shaped dross along the edges of thick laser-cut stainless steel, i can only describe it as a "sour" pain that seems to make every living cell nearby wince in pain, it's really really strange

[@galaxiedance3135]

@@jacksonlefteye I know that feeling. Your heart rate really changes too! I finished cutting down some stock guide for a die with the fly cutter. You know, it sort of peels away the metal on the far side and never quite breaks off. I went to file it off with a bastard file, my file slipped and I cut my thumb open with this 1/8" burr... It was very deep! In high school machine shop, I seen this long bar 1"x 3", maybe 12ft long, start to tip out of the steel rack when someone was getting something out. It was going to hit someone who didn't know it was falling. This bar was coated with oil. I reached out to grab it with my hand and stop it. I had all of my fingers cut pretty bad in 2 spots from the sharp corner of the rectangle stock steel. I had blood dripping all over the floor. I probably saved that student though. If that hits them in the head, could be dead. There was so much blood, i remember the kid asking if I have aids (cuz aids was big in the 90's) before he cleaned it up. haha. Thank god, i don't have any scars. ALSO, flying chips that melt onto your skin suck too! I have scars from a long curly one from a fly cutter. it was like Velcro coming off the back of my hand.

[@jestershyper]

I worked at rivian where I was a tool and die tech and always wondered how they were made in a factory

[@far_outlook]

Doesn't know anything about machines but talks a lot

[@buzzbee1251]

I love brass, two soft metals to make a mildly hard metal. It is wonderful in the lathe or on the table of a milling machine. It's Lustrius, forgiving, and a pleasure to work with - I think I like brass.

[@codprawn]

I doubt it is brass. More likely phosphor bronze oilite bearings.

[@user-jm5uy7dz1x]

Got to love the massive scale.. Great to see a modern nation still actually making things.

[@wussrestbrook1200]

How do you think east asia got rich?

[@KaranveerSingh97]

The rebar tying tool can easily go for $1000-3000... If you don't have one in today's day and age and are in construction you really need to get one

[@user-zu2rw8sb6y]

С удовольствием посмотрел как производятся погрузчики SOOSUNG в Корее. Приходилось обслуживать на производстве подобный, этой фирмы. Вмпечатления положительные.

[@dassmith]

Cheers to the person at 11:08 who added the finest packed and labeled box on the shelf.

[@user-by7ii3mf7k]

too much space above the packed item. It's gonna shift around. Every space needs to be filled for a proper pack.

[@clgusa23689]

Watching these machines work in harmony is like witnessing a well-orchestrated ballet. Only it's all gears and no tutus!

[@bryan2523]

The massive scale is incredible.

[@masterQ20]

*WOW!! Great idea with Metal my friend* 👏👏👏

[@AakeTraak]

To be honest, this was a total snoozefest. No shouting, no open flames, no janky cranes, no squinting welding, no chance for serious personal injury.

[@robertwest3093]

I was hoping that you would show all those holes being drilled in the bronze bearings.

[@colincunningham1902]

What a contrast to a Pakistani workshop! All are safety conscious, masks, boots eye ware, clean underfoot, quality metals and the overhead cranes are operated by small handheld controllers, no dangling cables to get in the way of workers!

[@dragibus66]

but china also don't care about heath and planet as you see in the last one !

[@colincunningham1902]

China doesn't care about anything, but this is Korea. @@dragibus66

[@nari8870]

중국아님.한국임 멍청아​@@dragibus66

[@alfredomosquera5832]

But I prefer to see a pakistani wizard, with hammer, chisel and rivets, create magic. That is creativity and skill, not seeing an army of robots make same things all over and over. That is boresome. Greets from Venezuela

[@Infinti999]

😂😂😂😂👍​@@alfredomosquera5832

[@jinksonyou]

This is the MOST satisfying video I've seen on KZbin! The attention to detail is OUT OF THIS WORLD, I can't even pick a favorite product! Everyone poured their heart n soul to EVERY STEP, there's not many places in the world you can say about! WELL DONE, ALL OF YOU!

[@guzmanmedina1963]

este tipo de videos es súper didáctico y súper interesante.

[@lupusdeum3894]

I am very very satisfied! Thanks again, Mr P !

[@marcosferro9898]

A Coreia é um país de primeiro mundo, tudo que é fabricado na Coreia tem uma excelente qualidade. Parabéns para vocês que fazem a Coreia ser a primeira do mundo em tecnologia.

[@alfredgravy6375]

Tank manufacturing, no tanks!

[@zadkmb]

全部粗悪品やで。

[@AppliedCryogenics]

I think it's really cool that Korean forklifts play "Für Elise" while backing up. U.S. forklifts just make an irritating beep that sounds like a 1980's alarm clock.

[@hiker123]

I think it would drive me crazy if i had to hear that all day.

[@jayson8372]

I was going to ask why they kept playing that (Für Elise). Thank you!

[@PexiTheBuilder]

Came to look answer what plays it, found it!

[@junc1328]

황동 무급유 베어링 자동차 프레스 금형업에서 가이드 부시 라고 해서 금형 상하 결합할때 사용함 검은색 점들은 움직일때 윤활 작용해주는 흑연임

[@Rebar77_real]

Got to love the massive scale.

[@LorenzinSerranete]

Verdaderamente satisfactorio🔝👍🏻

[@macroplexx]

Satisfactorio !! 😎

[@justinobittencourt2102]

Completamente incriveis👍👍👍

[@BrassLock]

Let me get this right ✅ 😌 Brass cylinders all shiny and new, with no holes in them get ridiculously hot and melt into a big blob, then are somehow squeezed out into a round lump of rather daggy looking brass. The daggy lump of brass is heated (again) and squeezed into cylinders once again, chopoed off into smaller cylinders, drilled full of holes (which are filled up with black stuff), ground to a shiny finish and put into cardboard boxes, because someone likes them more than the shiny cylinders they had in the first place. Makes *_Perfect Sense_* to me.

[@paradiselost9946]

lol. its a special type of bronze so theyre saving every shaving and remelting them down. "oil free bearings". the lil slugs are graphite, and despite the oil free... theyre then soaked in oil under pressure. they dont require oil when in _service_ is all... for those applications where oiling doesnt work, cant be used, etc. high temperature shafts in ovens, that sorta thing. and ceramic bearinsg are just too expensive and or unsuitable. some of us LIKE our spockled brass cylinders, thank you very much! lol

[@BrassLock]

@@paradiselost9946 Yes, they're rather cute lol.

[@dcdanger6151]

that cordless rebar tying tool for the win 👍🏻

[@CaldeirariaUsinagemRaiz]

Essential processes for industrial areas, and we are increasingly lacking qualified or experienced labor. Congratulations on the video.👍

[@z_ecMb_]

Очень много ручного труда,нужно больше роботизации.

[@HSS536]

Если есть много дешёвой рабочей силы, то зачем нужна роботизация.

[@tomb4496]

I was so impressed all the way through the video of the bearings until he packed the box. It look like my Christmas present wrapping.

[@stevenbyun]

Amazing process!

[@Jabberwok28]

You guys should be using the JetCo cutter for some of the sheet-metal and composite materials. No dust, and nowhere near the issues with slow-cutting of a grinder.

[@slowneutron6163]

The thumbnail for this looked like a bunch of shredded wheat biscuits for hill giants.

[@Suresh-ns1lt]

Oh fantastic job

[@kerjakeras65]

Kurasa ini adalah video yang sangat bagus...dan tidak membosankan untuk di tonton 👍🇮🇩..

[@machu7831]

우와! 이 비디오는 훌륭했습니다 🍩🚐😇😇

[@franciscopatrikcnazario660]

A reciclagem é muito importante

[@w.w77]

The forklift builders did a good job

[@workingexperts]

Verry nice

[@chriswright9819]

Not too sure what Beethoven would say about his tune being used all day

[@Mona.Lisa1503]

Yes.. very environmentally friendly, with modern machines, well. Pictures say more than words.

[@ifwemadeit]

Let the mud people suffer, me running my lawn mower all day everyday.

[@adehermansyah8175]

amazing !!!!

[@dcolb121]

If I had to do this day after week after year I'd go nuts.

[@jotac66]

Muito didático seus videos. Sugiro apenas que coloque o país onde está localizada a indústria . Fica completo.

[@antonionunes6031]

É só clicar em visualizações que esta lá, tudo em detalhes.

[@joshuahale8621]

That rebar wire tool I give a chefs kiss as a fellow iron worker .

[@matthewickman]

Wish I knew what was going on here, I like the particulars.

[@reemvonbraun2684]

1:03:00 interesting using an angle grinder outside !! kioos of glassfiber and polyester in the nearby peoples houses gardens lungs ....

[@markf350s]

Your workmanship is amazing. Something to be very proud of Americans should learn from it.

[@KM-vc2yp]

Speak for yourself

[@scottpittsinger1654]

welders, making company rich, get real time skill gets a boost

[@joon3009]

사출금형제작에 필요한 부싱이군요

[@armaky4962]

Congratulations Great Work Show man !

[@Zapper1279]

My mind would go insane after working in a factory where there is only 1 music and it’s “la lettre à Elise” - in France this is mainly used as waiting tones on administration things, therefore hell x100 - pavlov & ptsd triggering 😂😂😂

[@ilsinhoesp1]

Em 11:12, o vídeo mostra que cometeu uma falha ao embalar. Deixou 2 peças tendo atrito dentro da caixa de papelão pois não colocou o plástico bolha entre elas para proteger. 😱😱

[@South.Korean]

You got him fired.

[@RakeshKumar-ml7sv]

Good idea

[@ExploreTechniques95]

nice video

[@joanlittle4235]

This is better than a volcano It is all controlled verygood for me Granny usa

[@user-ju7cv1in5s]

Why Is GREEN SLEEVES playing on loop in the background of this bridge girder Manurfacturing company??????

[@zeroxception]

Great to see a modern nation still actually making things

[@KM-qx6nh]

I wonder ......... Were any of the lifts they used to lift their lifts among any of the lifts they have made ? 🤔

[@KelvinW344]

Looks like a real healthy amount of glass fiber / epoxy dust released into the environment (and inside the workers lungs) in the last video. And why is "Für Elise" played in two different sections?

[@wombatillo]

That's most likely polyester resin, not epoxy, but similar considerations apply. I would also be quite vary of applying styrene, vinyl toluene or some-such diluted resin without full chemical gloves. THose fabric backed worker gloves will eventually leak from cracks and wear and will most definitely absorb spills on the back of the hand and the cuffs.

[@spawn0683mailru]

Это полиэфирная смола, там на банках написано. Работал с нею, это просто настоящий ад. Она токсична. И какие после этого очистные сооружения?

[@kenc3288]

Those pallet truck guys. No mask when removing the frame from sand blasting, the painter’s face not fully shielded, the welder’s assistant no eye protection. Pretty lax safety standards for an advanced economy.

[@LarryTait1]

Odd that none of the micrometers are held in line and oriented to the inside diameters, the first few times we see them used. Always at some arbitrary angle. The rest of the process looks very good though. The final QC measurements are done properly.

[@manoelfilho583]

Olá, Parabéns pelo vídeo é Show! 👍🇧🇷

[@user-ce4bv3fd6f]

감속기 업체에서 23년째 근무중인데 오일레스베어링을 항상 구매해서 사용하는데 전가공 공정은 처음보네요!

[@Kalus_Saxon]

33:27 the old switcharoo…. 😉

[@lalbahaduryadav163]

Good

[@user-ot4ip1wl2j]

オオー　ノギスが　ミツトヨ製ですね🙌

[@ruperterskin2117]

Cool. Thanks for sharing.

[@koceng22]

amazing

[@ghorpestad]

Lots of PPE missing

[@ahmedluqman6224]

Spoken like a safety officer

[@TedBackus]

begin forced to listen to a 1988 casio keyboard version of Fur Elise every 30 seconds, all day long would be like purgatory

[@TruRoss-or6qi]

Я пять лет отработал на заводах РФ. Смотреть было интересно, и грустно. В РФ такие технологические процессы, сродни инопланетных технологий. Как будто прогулялся из каменного века, в век информационных технологий. 😅

[@mauriciolima9427]

Que legal 😃

[@selfbong]

SGO 보세요 함침시 제품을 넣고 진공상태에서 함침유를 주입해야 함침이 됩니다 BUSH상태에서 약 11%의 함침율을 보이며 Plate상태에서는 함침율이 5%가 안됩니다 그래서 루보에서 함침을 먼저한 윤활제를 쓴겁니다 약20%이상의 함침율이 나옵니다

[@blex5579]

those koreans got it down man...nice and tidy, even play "für Elise" lol from germany

[@matthewcornelius5862]

Dude those CNC machines are beat

[@user-ck2bn4ey8c]

21:41 corrosion is one of the most faced problems in industrial manufactoring

[@Manufacturingsite1]

Hello everyone have a great day

[@brain_health_quiz]

9:40 역시 어머니의 손맛!

[@shavingsdiy]

Нам показали удивительный производственный процесс,процесс производства ЧЕГО😮😮😮😮😮

[@user-rd8ty9lb6z]

По ходу это подшипники скольжения.

[@TheTattoomaschine]

sehr preziese messung des innen durchmessers! würde aich ein zollstock reichen

[@vincentjoseph5726]

My God bless you for seeing this work worthy i could use some elaborate of these dust Powder and tubes and solid flats and future customer service when i have my own favourite modeling technology technologiesi sharpened Diy projects craftsman style work Shop is ready to be All good morning and good luck and good wishes and good blessings and good health and good care and good career Lived with

[@handdancin]

chatGPT version -1,000

[@MyTubeSVp]

Concrete factory : Who else would go utterly mental with Für Elise playing all the time? That’s actually torture …

[@raycarnis9540]

That's the ice cream van outside.

[@TobyA777]

In the last segment, I see where Stockton Rush got his inspiration for his doomed sub from!

[@nightmare-9646]

Like anyway)

[@nguyebthao7295]

Çďb^☆●•°

[@RobertWilliams-mk8pl]

I understand the cable tensioning in the concrete members. But what would stop creep of the smooth cable within the concrete over time.

[@scrap_donetsk]

Черпаем вдохновение для наших работ 🪡🧵👠на вашем замечательном канале 🌿 с уважением, от коллег по обувному ремеслу 🔨✂ We draw inspiration for our work 🪡🧵👠on your wonderful channel 🌿 respect from collegues shoemakers 🔨✂

[@user-vy1kx1ot1o]

А что работодатель не вдохновляет и не мотивирует на созидательный труд?

[@scrap_donetsk]

@@user-vy1kx1ot1o , у нас нет работодателя, отзывы наших заказчиков вдохновляют и мотивируют на созидательный труд, а корейские, японские мастера вызывают восхищение и мы очень благодарны, что они бескорыстно делятся своим опытом. В частности, видео процессов создания обуви вручную от мастеров-коллег из этих стран (Terry Kim, Siroeno Yosui и др) - локомотив и источник вдохновения для нас в данной области

[@vega5eridan104]

Неужтоль этих прихваток полуавтоматической сварки хватает для силовой конструкции данного подъемника почему они не проверили основные стыки металлических пластин не понимаю

[@Richard-om7vd]

Excellent video.

[@iwanberkelanaofficial5460]

Amazing🤔🤔🤔🤔👍👍👍👍

[@ChandysK]

The mother usual do any dough at home, how about do it one by one by just like healing process

[@g.r.4853]

Hello FedEx, I got an overnight for Philly PA.

[@artszabo1015]

In your first chapter what is the name of this company in Korea? Back in 1990 I went to Toronto Canada and disassembled a brass mill called Arrowhead Metals. The machinery went to Poonsan Ind. in Korea. Could this be the same extruder??? Art from Ohio

[@proavtoholod]

Зачем я это смотрю в два часа ночи

[@youtubek-ih8ho]

как много ручного труда) Не правильно это. Особенно в подшипниках и хим резервуарах

[@anonamouse5917]

The 15:11 segment: I wonder how many of those workers go home and blast 'Fur Elise' at full volume.