Most Versatile Wood Stove heating System in the world

Darwin shows four unique features of this versatile Rocket Mass Heater. visual fire glass, pellet burning option, and others.the prototype burns efficient and clean.
Honeydocarpentershop.com
Etsy.com/Honey Do Carpenter Shop
This is an amazing stove! check out the other videos!
• Ultimate Wood Burning ...
• Heating your Home AMAZ...
Check out our shop
www.etsy.com/sh...
Check out our website:
www.honeydocar...
Email
[e-mail]
Send Mail to
Honey Do Carpenter
PO BOX 51272
Idaho Falls, ID 83405
Pinterest
/ honeydocarpentr
Facebook
Honey Do Carpenter
Hydrated Lime:
amzn.to/2umLys6
J lube:
amzn.to/2KA7Kot
Gloves:
amzn.to/2gFXUo0
Glasses:
amzn.to/2gFkz43

[@dirtpatcheaven]

Love seeing the inside of the new stove!

[@jamesreynolds1275]

Man this is fantastic!! So many possibilities!

[@tubularguynine]

The 'Brainchild' model just keeps getting better and better! When your stock goes public, let me know! 👍🏻

[@magicdaveable]

Excellent Video Darwin!

[@TsetsiStoyanova]

Mad mad mad skillz and not the mention the brainwork apparatus

[@christophermyers5169]

best wishes, love the development!

[@TentFever]

Use contained pinballs as the mass instead of the rock. Major dense Mass that will charge and retain heat for hours if not a day.

[@carpenterfamily6198]

Clean gas with balled up wet newspaper dipped in wood ash. Then rub in a circular motion n the dirty glass. But also stove glass seems to get dirty, the ‘ self clean ‘ ~ burn off / clean.

[@lancerudy9934]

I love the pellets feeders system. Show it!

[@AndyOpreshyn]

Do you make a stove and oven using this system?

[@carpenterfamily6198]

May 2020 - I don’t see anything about the stove in the Etsy store. Are you still working on it ? If so do you have a rough ETA ? Ty 👍

[@lancerudy9934]

I want to buy one!😁

[@JR-xw5dk]

What if you added air damper for the bed around the secondary burn chamber to better control room temperature?

[@NTF-zb9wi]

IF I'm understanding things correctly (I'm still learning a lot in preparation for having to "reinvent the wheel"), the temperature is controlled by regulating the burn, via the air flow coming in.

[@greenhornfarmer3598]

Darwin, I would love to help with the kickstarter but I am unemployed and taking care of my Brother who is handicapped. Can you tell me what the plans will run after the kickstarter is over? Also, what do you expect the unit would cost on average to build including the pellet hopper?

[@pamcolechadwell1302]

wouldn't it be nice to have the bench a big ol bed! No more cold feet in 40 below. HaHa

[@salimufari]

Mass containment apparatus = box. In all seriousness I would consider welding some thinner say .. 1/8" flat stock at about 3/4 to 1" on the outside of the riser like a radiator sink and either use a sterling stove top fan or a thin shroud outside of that instead of the gravel. Better heat transmitter than lose stone don't you think? Welding it on vertical or horizontal depends on how you want to spread that heat with a fan and shroud like the "box" or passive. I also looked at the cost of large aluminum sinks and bolting those on the outside shell. This seemed too expensive but not sure.

[@Jim_woods]

Sweet

[@shemamabell-irving2671]

Trying to design a rocket stove that makes biochar.

[@strandymusic]

Does purchasing the Early Bird Special include the privileges of the Insiders Only Club? Or are each of these a separate thing???

[@HoneyDoCarpenter]

Yes you Do. You are not the only one to ask that. After the video today I have had people that bought the insiders only package upgrade to the early bird special. I spoke with Mrs. Honey Do about it and we Feel as though combining the two is the fairest thing to do at this point. So any one that purchases the early bird special will also get an exclusive link to the insiders only access as well.

[@AndyOpreshyn]

where can i buy one?

[@pamcolechadwell1302]

I put the link on my FB page Hope it does you some good!

[@ntziacha2069]

I like to buy your stove here

[@robertlanham8076]

Are there plans for sale???

[@marconantel7735]

Woohoo!

[@jtulley2839]

Have you tried it yet ??

[@bsod5608]

Boilers should be tested and proved in long time operation before a selling process is started. A rocket stove burn at very high temperatures. This affect the material more than in conventional stoves. The lifespan of the wrong material in the core will result in very short lifespan. It is a hard tricky to make a durable, easily cleanable, affordable, clean burning stove with high efficiency. You claim this is a versatile concept, sure but modifying parts of the concept affect temperaures, draft, efficiency. Thats is why one should start of with a design that works and make slight modifications. You cant just skip the bench without either suffer low efficiency or adding more heat transfer surface. I would buy from someone who actually have tried and proved the concept for many year of operation.

[@tatlletale]

Will u sell me one?How ?much?

[@HoneyDoCarpenter]

Yes they willbe out for sale soon in DIY Kits

[@myidahohomestead.7123]

You try too hard to sound smarter than you are. Anyone can draw plans. Build it and see if it actually works in all the ways you think it will.