Yamaha MT10 Headlight Replacement | Build Series EP4

[@davewijland5108]

Finally some one who shows me how the headlight is connected with great zoom in. Thank youu

[@AdjrianNickelodeon]

Thanks for doing the groundwork, bro! What a pain in the arse of a job!

[@MotoDragon]

Cheers man 👌 don't forget to subscribe 😂

[@888jackflash]

Great job! CAN YOU TELL from this experience... if there is any way to get BOTH low-beams to run at the same time? Here in the US a single headlight is weird.. and not safe. Do you have any thoughts if the BULBS inside could be changed somehow? I could easily rewire the harness.

[@bccapone837]

What year r6 headlights were they

[@toxroma]

Hi mate thanks for the great video, do you know if the little spoilers under the headlights is screwed on or is part of fhe headlight shroud ? I mean the two flaps that cover the steering damper, cheers!

[@bccapone837]

Did you manage to adjust the headlight beam , and when you said you needed to adjust a clip at the back what did you mean , great job tho bro , I was dreading this job as I've got two cracked headlights so thank you for this vid too 👍🏼

[@devinvinson5345]

Is there a way to put on a aftermarket head light assembly I love the bike but head lights are so ugly

[@ivicastanic3605]

I manage to find headlight lens covers for my R1 2015, but I don't know how to remove the original ones that are cracked. Beside those 2 small screws, can you tell are the lens covers glued permanently or maybe sealed with some rubber like material that can be soften by heat? I appreciate any help.

[@juanpacagi2378]

Bro! Que otro faro pueden reemplazar los originales que funcionen bien que otra referencia de Yamaha? Gracias

[@simonsays5442]

Is it possible to remove the headlight cover without removing the whole module?

[@bogdansimion7292]

Hello , i have also broken headlights and i found on the internet r1 headlights , they also match like the r6 ones?

[@carlblanchette5793]

do you know if the headlights of the r1 2018 are the same as the mt10?

[@leefellows3584]

Just done the same thing on my 18 Mt10 you’re not kidding about how fiddly it is 😆 I just replaced the lens on one side! Still a pain though 😆 thanks for your help 🙏🏻✌🏼

[@MotoDragon]

Aw stop it's just a nightmare. Like all the panels click in and make so much sense but they didn't think about the headlight and its do hard 😂 no worries glad to of helped 👌

[@bogdansimion7292]

Mine cracked for no reason , you guys know if i can find just lenses for them? The entire headlight is verry expensive

[@ivicastanic3605]

I manage to find headlight lens covers for my R1 2015, but I don't know how to remove the original ones that are cracked. Beside those 2 small screws, can you tell are the lens covers glued permanently or maybe sealed with some rubber like material that can be soften by heat? I appreciate any help.

[@theonetwocombo]

very nice man :) loving the time lapse

[@MotoDragon]

Thanks man. Wonder who could of requested it 😂

[@Zedhead_]

It's always a ball ache working on bikes, good job man. It can test your patience sometimes. Good result though. 👍👊

[@MotoDragon]

Thanks man. I don't have any patience to begin with so that really doesn't help 😂 there's something satisfying working on your own bike 🙏

[@Zedhead_]

@@MotoDragon Totally agree, it gives you a connection with the bike that nothing else can.

[@mathias6423]

This first gen bike still looked cool and somewhat brutal and futuristic. The new 2023 gen 2 bike looks like a dogs dinner, the new front light/headlight is hideous, looks sooooo crap. There will surely be a third party option for the gen 2 MT-10 headlight very soon because I can not honestly understand how anybody could look at the gen 2 bike and love it I did not think that Yamaha would make the new bike uglier than the older bike

[@rabola55]

I'm also looking at replacements but haven't found any yet. Looks like we have to make a custom build with aftermarket headlight parts.

[@lammy2304]

Do you know if you’d have to do all that to change the mesh grille in the centre of the lights? I’ve got a 17 plate and the dead bugs have made it go rusty !! 🙈

[@MotoDragon]

Unfortunately yes. There are people who have found a way to take off the headlight cover without taking the whole unit off. But it's easier to just take it off. Only issue is what hold it on are metal screws in plastic threads and mine are pretty much fucked after taking it on and off a few times. I bought a satin black touch up pen with a brush and just touched up the rush, perfect color match and no hassle.

[@EL_Cerva]

Do you know where to find the full lighthouse?

[@MotoDragon]

Are you in Europe if so I can give you a few sites

[@EL_Cerva]

Moto Dragon Could you give me the link where you buy your parts

[@MotoDragon]

Boonstra parts, cmsnl & motorcycle spare parts eu Boonstra parts is used parts and the others are brand new oem parts

[@chrisgray2851]

The struggle with the wrongs tools 😂😂😂

[@MotoDragon]

I know 😂 I got a loan of a proper set from my dad and had it all taken apart in 15 minutes 😂

[@МоторикАМоторикА]

Hi bro!I'm from Russia myself .Tell me where to buy a low beam headlight on the Yamaha mt10

[@MotoDragon]

Hi. I am not too sure. I bought both lights from an R6 that was used for track. If you know of a local track maybe ask them their

[@TheGorillaBiker]

Just wanted to remind you your hair is gone. Have you updated the firmware on the gopro, that sorted my ones freezing craic. Very good video lad, I'd be happy to go at that now myself

[@MotoDragon]

It's growing back fast but wanna shave it again I like it. Yeh all updated, I'll buy a new card and hopefully thay fixed it. Thanks man 👌

[@m-b6561]

Wish they make custom headlight its the only thing holding me back on buying a mt10. Im not sure i can live with stock look.

[@MotoDragon]

I love the look of the headlight it's just so different and aggressive