Best Honda Ruckus Levers!

[@RollingWrench]

Sad to see the Ruck content come to an end :-(

[@RollingWrench]

Pressurize the brake and pop the banjo bolt at the top. That’s normally the last step to get that last bit of bubbles out ... PRO TIP :-)

[@motonosity]

I’ll give that a shot!

[@mikelaradesigns]

Yeah tiny air bubble top of the banjo.

[@meanrianz5646]

Yess...agree

[@sammy5443]

@@motonosity hi I'm interested in buying the ruckus how much

[@pinoyelectriciansbayarea1608]

@@motonosity how much i want to buy one

[@dresnowden2227]

Im sad to see it go! I just got a ruckus and couldn't be more excited. Your Ruckus videos have been so fun to watch! So thank you for the amazing content!

[@krisdorty5814]

So is the Ruckus still for sale? I didn’t see the link.

[@nicholasventura4107]

How can I disconnect wire from break lover start bike

[@shox75]

Had a similar symptom on my ruck where the first couple pulls of the lever were soft, and after it was good. I have adelin levers aswell, but it turned out to be loosened up rotor mount bolts on the hub. It would cause the rotor to wobble and push the pistons back. Similarly a warped rotor would cause this.

[@vwfreshness459]

Pump your front brake lever a bunch of times and then with the lever squeezed crack the top brake hose banjo fitting. This normally works for me on getting the last bit of air out.

[@Uprise95341]

There is some nice retro style led headlights for the ruckus

[@HiiSenpai]

The bike is beautiful 🤩 lovely sound and comfortable 3 in 1 ❤️

[@paintslinger1045]

New levers look good

[@Fee.1]

Do you have a leather jacket for winter? Do you find any leather jackets can be tolerable in Texas/Louisiana summer heat? Struggling with gear choices and cycle gear reps just follow you around like your buying an appliance

[@Rekluse22]

The whole video I was waiting for fry to pop out of nowhere in the background 😂

[@Ochnoe123]

I think I read something like the brake pump piston size (diameter) of the brake lever and the caliper has to fit together. The pressure ratios are changing when it is a mismatch. Maybe read into that topic. Maybe this is causing the strange brake feel.

[@nicholasventura4107]

How did you install a brake switch on a lever

[@nicholasventura4107]

How do you install the brake switch on the leavers

[@Mighty_flyt]

Will these brakes fit normal setup Honda Zoomer 2004 with drum brakes?

[@pinoyelectriciansbayarea1608]

How much you selling on ruckus planning to buy one

[@cbr-nick830]

Definitely need that EFI life 😎🤘🤘🤘🤘🤘🤘!!!!!!!!

[@isaaczag3921]

You could try to ride an MV Agusta ( f3 675, f3 800, f4, dragster, brutale)

[@Icantthinkofanameman]

1:55 thats a lot of pokemon cards. cant wait for vids on the other channel

[@cynthiaacevedo3046]

Did I miss the link?

[@charliecasseday8886]

Y did u sell it

[@MotoMiles]

Hey just wanted to say thank you I passed my MSF because of your instructional videos.I know you might not get a chance to read this but thanks 🙏 anyway!

[@DivergentDroid]

Please Help! I ordered a Left/Rear drum brake lever with switch to replace a lever that broke. The new lever does Not have a spring on the pivot point of the handle to keep the switch in the closed position when it is not being pulled back. My old brake lever does have a recess in the pivot point to accommodate the spring and it has the spring thus keeping the switch in the closed position. How could the new lever I bought possibly work without the spring? I don't see that it can.

[@paulflood4420]

Same

[@DivergentDroid]

@@paulflood4420 I figured it out. The tension on the cable provides the tension. The spring is not needed.

[@Smallbore2wheels]

Ruckus! Definitely sad to see this BIKE go

[@chrisp.5272]

I wish I could afford that Ruckus.

[@Mikeongaia]

That is alot of pokemon boxes in the background. Lol.

[@12oclockboy]

Sounds rough

[@Br4ndo562]

Hi

[@DimSumSDP]

Don't sell it.. keep it so you can race some other scooters..

[@kingdany491]

buy a new kawasaki h2

[@sondreskjelstad4695]

Eyoo

[@benst2594]

last