Motor Start Stop Ladder logic PLC Programming Tutorials for Beginners

[@IsakAmunkete]

Very simple and detailed. Thank you.

[@haidarquarrar8848]

Sir you have explained very nice

[@amr.a-m8350]

Good video for PLC but what's the usage of interlock on or off the motor _trip, please?

[@peperzanca1]

For the motor, the first element must be the contactor, which contains the N.O. Auxiliary contact; then follows the thermal element called the overload relay which contains the current adjustment knob to trip the thermal overload relay to the motor.

[@2loco]

You can place a motor circuit breaker UPSTREAM of the contactor. 😏

[@puranmal32]

Very excellent

[@ahmadirfanizuddin4629]

what app u use for the curvuit

[@surendrakverma555]

Thanks Sir 👍

[@najmussakib66]

thanks

[@ersheikismail8293]

loved it❣

[@heroevulgar]

What is the name of the software used for the simulation?

[@EASYPLCTRAINING]

Blender 3.1

[@motionfx2023]

Excellent, thank you, i have a PLC Control Board FX3U-14MR, but i don't have any software to program it, can you please help me to have the software for that PLC. thanks

[@mixme8655]

Thank you

[@trofimgatchinskiy4260]

And why not enter X2 instead of Y3?

[@prajwalkale6295]

how X2 turn on ? While we are not providing the signal to turn on x2

[@david04-i9]

X2 is a feedback from the contactor; once it's running the Normally Open contact from Contactor closes and is a Closed contact. (therefore changing X2 from 0 to 1)

[@MrGomes76]

Show 👍👍👍👍

[@linhle8464]

👍👍