Motorized Kent Bayside (Honest Review)

A solid frame for your first or 2nd Motorized Bike.
The Kent Bayside has allot of advantages for a cheap NEW motorized bike.
Music: RYYZN - Fake People
FAQs:
Oil: 32:1, semi synthetic, random brands.
Gas: 87oct
Spark Plug: NGK B8HS (yd-100), NGK B6HS (pk80)
Parts: I buy mostly from Amazon.
Favorite Motor: Zeda (Firestorm) Triple 40
Favorite Carburetor: NT Speed
Favorite Bike For A Motor: I don't have one yet.

[@ArthronOfFir3]

The lord of motorized bicycles in Louisiana is back, also please prepare for gasoline prices for a few weeks.

[@InsanePickle24]

As long as I can still get a gallon with a 5 spot i'm not too worried. A gallon lasts me almost a week

[@moomeansmooable]

Near impossible to get a motorised bike road legal here so I did the next best thing and bought an old 70s moped. I gotta say bobbing along on a little 50 is one of the most relaxing forms of transport on the planet

[@jonathanvaldez2460]

One day I want to build or buy the ultimate motorized bicycle. I want a diesel powered all suspension twin flat 40cc supercharged reversed trike with 2.5 inch tires and 3 speed transmission.

[@ravenpawcraft]

@@jonathanvaldez2460 good luck with the diesel!

[@charliepatterson9321]

I added butterfly bars and a banana seat on all of my old builds . When doing 40 mile round trips it was very comfortable and I could hang saddlebags for tools and parts . Other than catastrophic failure i could keep going through most breakdowns . Enjoyed the vid !

[@BakedAndAwakePodcast]

TGIF indeed! Just what we needed today! Will put this on down in the garage as I tinker..

[@rileyplamondon8095]

hey! been watching for a while and i can tell the editing is geting alot better!

[@joneserupinsmoke9161]

I have the same bars just drop em down a lil bit they feel ten time's better

[@jonathanvaldez2460]

My first bike was a Kent rockdale. That bike was the foundation for my passion for experimenting kits and homemade technology alike. I want to break the boundaries.

[@KWM1972]

I found one of these at my local goodwill for 30 bucks so its my first gas bike build its been great and a lot of fun this channel has a ton of great info thanks 🙏🎸🙏

[@SPMPchannel]

I've just buildt mine in South Africa. Oh men this bike turn heads and is very fun to ride. I enjoy every moment of it. From building, maintenance and riding. This thing is heaven.

[@nicholaschavez5120]

La your vids are a lifesaver! My first build broke many months ago and I want to make a new one on a Bayside thanks man

[@corysnladventures2758]

Be nice if you considered building a 49cc 4-stroke but not a bikeberry brand chain driven😁👍

[@gregnixon1296]

This looks like fun. I'm envious that you have a good place to ride it.

[@internetguy5125]

Excellent review! Thanks for making this!

[@drakejavener7354]

I'm going to buy a Kent bayside for my project. Thanks for the review.

[@InsanePickle24]

Nice review! I'm considering a possible new build soon and I might use one of these

[@bryduhbikeguy]

Great review and ride.TY.I've broken myself too badly to use 'straight'handlebars and took one from a 'throwaway' 20" moto-cross style.I have to set upright,like your bike here allows.I had to 'carefully'stretch open the bolt/slot area and slide the crossbar through but I've been happy with my choice.Happy Trails.

[@tritonalabaster6269]

I just managed to get a 49cc 4 stroke to fit into my Kent Bayside recently- modifications include 4 holes drilled into the solid cast adjustable plates on the mount (this allows you to actually adjust the engine for chain alignment) and a bent choke lever, but other than that it runs fine! Waiting to get free time to adjust the alignment and I'll write how it went (maybe even a video?) Great vids, been bingeing them for the past week or so.

[@LAHover]

Nice work getting it to fit. The chain was always a bit picky on mine. I went with an arc tensioner for better alignment, works great.

[@twowheeledadventures]

Ive had this bike for over a year and a half, had 3 different motors on it, Ive had to replace the tires once and the breakpads twice, I also added front forks, its been a great bike!

[@twowheeledadventures]

Well other then its cursed when it comes to motors lol 😂 only bike ive ever had that I run through motors so fast, I'm sure its my fault but I like the idea of the curse!

[@michaelkeeley9392]

I had excellent results using this one last year. I also didn't like the handle bars .very solid and smooth ride..regret selling it. I discovered ther is a 29inch version of this and actually on waiting list to be notified..have big plans for it.

[@codelicious6590]

I actually very recently overhauled my whole rig which was in the works anyway, I had a new iron sleeved cylinder and a 4Reed setup to try out, but got pushed to the fore due to water getting into the gas! When I split the cases to replace bearings, the bottom had a good deal of water in it due to having been run a little bit before it just stopped. I don't know how much water you may have gotten in your system, but it may be wise to consider the fact that it wont go anywhere once it's down in the crankcase unless you get it out of there. I think it actually may have cleaned things up a bit during the short period it ran tho!

[@gta5grindzxb145]

I've got a Hyper Commute with a BT80 on it, rides great. Its got a little bit of a floaty like ride to it, but that's an aluminum frame for you. So far only thing I can say bad about it is the stock brake pads didn't last a week, lol. But I replaced them with better quality pads. Love the electric start, and I added a 12 volt led headlight.

[@hutchcoservices]

My first motorized bike was a KENT Bayside in 2016. It only cost $99.00 from Walmart (back then). The only flaw I came across was the small spokes. Which you had to constantly insuring they are trued. To overcome this, I switched to some after market heavy duty rims. Oh yeah, the rear brake caliper snapped on me after a hard stop. It actually jerked the entire set-up forward as it gripped the rim. I would add a disk brake adapter kit to the front forks. It takes less than an hour to install. 30 minutes if you're mechanically inclined...lol

[@codelicious6590]

This is the bike I was planning to buy for my latest bike until I found the Schwinn Swindler in an alley somebody was throwing away! Looks like a good option. I gotta get me one of those cupholders tho! So many times I find myself getting a beverage only to remember that I can't roll with it cuz I need both my hands to ride!

[@rockyrococo2584]

I love my Kent Bayside. In fact I recommend it on one of your videos about choosing a frame anojt a year ago. I frequent dirt roads with plenty of bumps and it takes a pounding for a cruise frame. I was quite safe to see they more than doubled in price in the past year to $300ish from the $150 they sold for in 2019. Only thing I changed was upgrading to a suspension fork a month ago. I also recommend adding an offset seat post for comfort and style. Also a dio reed fits perfectly for a tight frame if you add a 90 degree barb fitting face ring towards the front. Which looks better and is in a more comfortable spot than the 45 towards the back anyway. Ps. The stats have just enough clearance for a disc brake set up as well.which is nice as hell. The front caliper is grayish, but the back caliper is pure garbage even for a non motor bike.

[@tonykartracer8032]

I have a few questions if you don't mind. I have a Huffy cruiser and wanting to put front fork suspension on it, what size would I need? I'm assuming it's the same as a Kent Bayside, even if not can you tell me what forks you got for yours? And also.... I have a mountain bike frame that seems a bit tight as far as putting on a motor goes..... I also have a DIO reed setup and hoping it might just squeezed in, but what is that 90 degree barb fitting you are talking about?

[@rockyrococo2584]

@@tonykartracer8032 almost certain your huffy has a 1 inch headset. If it has a threaded stem and quill it's a 1 inch headset. I never seen a Huffy that isn't. The barb fitting I am talking about is for flexible black pipe. It's used for water pumps and water systems. The barb fittings are what you use to join the flexible plastic black pipe with hose clamps. If you need elbow or 45 degree the size fitting you want is 1 1/4 inch fittings. Just go to any hardware store in the plumbing sections and tell them you are looking for flexible black pipe barb fittings 1 1/4 inch. They'll know exactly what you mean. They fit perfectly with the rubber fittings that come with the dio set up. You just want to trim them down with a hacksaw down to the one or two barbs.

[@ajmotorsport9246]

Sup ma brother la hover! I love the bike I definitely gotta check that bike out 👌 my bike have the same seat definitely is comfortable 👍the motor looks like it runs lot better with that bike I like the height of the bike💯 love the upgraded cylinder head crazy thing is I just ordered the rounded one that almost look the same as the one you have on your motor 💪 as always ma love and respect to you and the family and the whole world stay safe ride safe 💯bike life family let's goooooo 💪💯💯💯

[@ttl34570]

I slapped a 4 stroke on this frame and its held up great

[@christiansanchez1486]

I have a Kent bayside one of the most solid frames I’ve ever owned for the price tag I’ve had my lil 80cc on it for 3,759 miles never broke any spokes during that time either knock on wood

[@Robert-hf5xr]

That looks good

[@ernestarizpe6924]

I have two of these babies with ape hangers and it makes me feel like I'm on vacation

[@MFROYAL-pc1vr]

The frame is similar to the hyper 26 cruiser, it did have the bent tube so I was able to put a 4 stroke in it.

[@ernestoarizpe5506]

I HAVE TWO AND THEY ARE BAD ASSES

[@painhasgotchyu4733]

Building one of these today for a customer

[@bren42069]

Oh hey. This is the frame I found in a dumpster the other day. 😎 free bike!

[@LAHover]

Good find, even if only for parts. They make great cruisers

[@bren42069]

@@LAHover she cleaned up alright. I've been riding it around by foot for about a year, the chain guard i had to rip off and removed the fenders, had to add a seat, put on a milk crate in the back. It is comfortable, but definitely heavy. She's gettin a zeda, 48t sadly, the cup holder mount on mine broke off :( i first thought a cupholder on a bike was stupid but it was actually kinda convenient at times. I used to pedal to the laundry at my trailer park and pick up cans of coke at the vending machine there. less of a problem now though since I have the basket on the back.

[@netx421]

I just built my first bike. Yd100 on a Kent Seachange. It looks a little like a stripped down version of the Bayside. I'm building a second one now. One bike isn't enough

[@ChuckHaney]

I remember from past videos that you've had some experience with bad mirrors. I need a mirror but can't use the the kind that goes in the handle bar end. Do you have a mirror you can recommend?

[@baliongerewiong2194]

Bro amazing what, where to I find the Bicycle Engine Kit?

[@artofdisguy3401]

Suspension seat post with that seat works even better,, Amazon 30 bucks Use the Ebike grade inner tubes, they are heavier on the tire side of the tube. You can buy the catilever brakes like you have with the adjusters built in, or if you are a scavenger, older 70's- 80's bikes had them if you find an abandoned one in your travels pull them off, everything can be cleaned up and lubed to work

[@LAHover]

Thanks for pointing them out. Just found them, I'm going to order one :)

[@GuilhermeTrojan]

have tried change the handlebar angle? I find this kind of bar really good when they're more horizontal; They make easy to control your weight in the bike

[@GuilhermeTrojan]

kzbin.info/www/bejne/aJuzqIeQh9ljjJo tried to demonstrate what I mean. This configuration of the handle bar for me i very confortable and quick and fun. :D

[@ravenpawcraft]

was going to mention that. his are wayyy up, looks awful

[@randymarsh1164]

+1 for straight handlebars, I don't know what they are thinking with those weird uncomfortable angled bars

[@krenhol2081]

I use the 50cc version, im going to buy the 80cc (66cc) whole kit, i expect more power. But i see a 100cc version, should i?

[@jamesraney8867]

What lumens for a front light for night rides do yall suggest by my state law I got to be seen 500ft away

[@andreporter9881]

Anyone convert to disc brakes? What hubs did you use? I plan on converting to a dual brake lever, and disc brakes

[@anthonyzamano3929]

I have the same bike and I put a motor on it and the brake pads wore out in a week. What should I do

[@huntwisejdr793]

I have a suitac 66cc can't figure out what size head and piston I need to replace could you help me

[@kimdecastro9156]

like your video.

[@ravenyoung-eb4cq]

Will u please educate me on the sprocket size your using cause lol I have a 44t om mines but I haven pit the motor on this bike yet

[@DeanCreegerX]

Where is the best place 2 by a motor mount offset for my OCC Chopper

[@user-jo9mo2wl7v]

Has anyone tried a cnc front engine mount with zeda 80 on this bike did the carb fit with the air filter

[@josephwoodall832]

The brakes have real issues the caliper springs are also weak the stock pads were gone in less than 10 miles. I'm converting to disc.

[@cbull283]

On your comment about the fenders, I wouldn't go a foot without taking them off. Just had a nasty crash two weeks ago where the front fender got bent after speeding down a hill, and grabbed the side of the tire causing the handlebars to do a full 180 on me. I walked away with skinned palms and a twisted ankle, but it could've been waaay worse!

[@LAHover]

Glad you are ok!

[@gmoney9464]

I got the same bike with the engine on it you recommend a Firestone zeta 80 good motor

[@Danny-gm5jx]

Any issues with the bayside installing the Zeda ? Getting this exact setup! Would love tips

[@joeycrapps]

I'm building one like that

[@brianthomassr9451]

How much it cost for the engine?

[@Tomas-gt6kx]

Hello im getting into biking with motors and I wanted to ask if the zeda 80 cc from firestorm is a good beginner choice

[@LAHover]

Yes it is :) Every china motor is a bit of a lottery. but as far as the Zeda 80 Firestorm goes, the one I use and most other builders I talk, to like/love them. I was beating mine up on a trail bike, and it out lasted the bike before I had to rebuild the motor. So basic street use should last for years if treated well.

[@Tomas-gt6kx]

@@LAHover im so thankful you replied me and my dad were looking at your videos just a couple hours ago my fav vid was the buying guide maybeee just maybe i would suggest make a updated version 🧐🧐🧐

[@sundial6919]

I have 2 bikes w Staton friction dr kits , my Giant hybrid bike runs a Zanoah g430 42cc and has 1.7k miles and my Fugi Barnebey cruiser runs a Kasei 1E48F 63cc w 2.6k miles and both engines have been trouble free except broken pull cord on 1e48f and my comfort zone cruise is 20mph and Zanoah is fastest at 38mph . What is your average comfort zone for the engine cruise speed ? And also which brand is top quality ? On my barneby i have more generous engine bay and thinking of 160cc honda 4 stroke , saw 1 guy that easily cruised at 45mph but 2 strokes fit easier

[@LAHover]

On trails about 15mph, 25 on street. The Seeutek pk80 has been the most trouble free motor I have owned. But with China motors everything is a lottery. I advise against putting dirt bike/motorcycle motors on any bike frame unless you absolutely know what you are getting yourself into.

[@sundial6919]

@@LAHover this is an indepth really good review on the Kent Bayside . I have since bought the Kent seachange cruiser and wish i had gotten the bayside but like you said these short wheelbase bikes handle great they instantly can hang quick sharp curves and at your suggestion installed the Zeda firestorm80 w a 36t sprocket and i get a 5mph added engine comfort zone cruise over my friction bikes that cruise forever at 20mph . So i now have 720 trouble free miles on it . Thanks for all you do and to me your shows are the most interesting and informitive many thanks

[@jasonjulian1]

So this bike is now $178... Given how prices on everything, especially bikes, having gone up... Still worthwhile? Or shoot for the Cranbrook for $10 less?

[@LAHover]

At the Moment, the Huffy Lockland is the best of both worlds. $170 with free shipping www.walmart.com/ip/Huffy-Lockland-26-inch-7-speed-Cruiser-Bike-for-Men-Black/138403447

[@PlayingWithFireOutdoors]

The bars were THE FIRST thing I got rid of with my HUFFY. I'd like to see the rest of that persons designs, and make them ride it.

[@edwardheng2886]

How many miles can you get on the bike engine in it's life span? I am planning to purchace a motor for my bike. Can you advise?

[@charliepatterson9321]

Its a crap shoot . You can have two identical engines side by side brand new back to back off of the assembly line and they're going to have different problems. I got as little as 1000 miles from my worst engine and 3000 plus miles on my best . Top ends are not very expensive and once you learn torque specs and get a few proper tools things get simple . It's fun if you enjoy tinkering . These bikes are like gumbo . No two bowls are the same

[@charliepatterson9321]

Be sure to clean and double check any fresh buy ! It doesn't hurt to put a tablespoon of oil in the plug for the very first start . ( I bought one kit and the case leaked from brand new , when it starts it's hard to stop . Check your case before putting it on the frame )

[@josephwoodall832]

I bought the same bike I put a phantom 85 on it. I had the same issue with the brakes. Not good. I'm replacing everything including cables. Wish I could put disc brakes on it.

[@josephwoodall832]

I didn't take the fenders off I'll do that next I tried it with the dual brake system didn't improve the brakes but it did allowed me to keep the shifter on the right side also I love the thumb throttle.

[@LAHover]

The brakes will get better as they rub through the rim paint. The stock fenders are a time bomb, remove ASAP!

[@josephwoodall832]

@@LAHover the pads didn't last five miles I'm ordering new ones and calipers and wheels lol

[@painhasgotchyu4733]

Did you need the bracket cause my kits don't come with em

[@LAHover]

No, I added it to help protect the team in the long run.

[@buckslayer2845]

i have a zeda 100cc and ever since i got it running it makes a weird rattle like sound at 20-22 mph and then goes away if i go faster or slower i have no clue what it could be.

[@LAHover]

I have had these little motors make all kinds of odd noises that I can't find. something as simple as the clutch cam/bar rattling around, to something as bad as a backwards piston can throw you in a loop.

[@buckslayer2845]

@@LAHover i looked at the piston and it was in the correct way but ive never thought about the clutch bar. i was told by some other people the i need to rejet the carb because the engine is running to rich but idk how it running rich would cuase a vibration only at a certain speed.

[@brianthomassr9451]

So should I buy a Kent crusier bike from Walmart? In your opinion

[@LAHover]

The bayside is a good option still, but now the Huffy Lockland looks to be a little be better.

[@FlyRc23]

Rotate those bars down so the grips slant down instead of up.

[@Tom-zv9fl]

I wish they would sell them in Europe...

[@lukadavidovic4695]

100cc or 110cc

[@mjsmjs7905]

I saw one of those today at Walmart, people say it's hard to mount a four strokes on those bikes, must be an optical illusion because it looks way bigger than my Cranbrook, and that new Kent Seachange frame looks enormous.

[@DeanCreegerX]

Had one for a year just sold it

[@shelbertoswaggapants873]

My bike is a giant butte, huhuhuhuhuhu giant butt... Anyways, for the derailleur/chain tension problem, I made the bike into a single speed and bought one of those downhill mountain bike chain tensioners, works great, basically a derailleur but made to keep tension.

[@dustinh4175]

I knew a guy that had the front fender wreck him bad. Like ambulance bad.

[@LAHover]

Any time you see a new builder with stock fenders let them know what's up. Many of them just don't know how bad it can be wen (not if) they fail.

[@michaelwalton1261]

Get some mag rims