Road Warrior Fairing installation on 2020 Low Rider S

[@patrickodonovan5066]

Thank you for putting this together. Just like one of the gentlemen below I watched this on silent while at work. Watching relaxed me and made me happy. That is a beautiful Lowrider S. My first bike was an FXRS Lowrider and your vlog brought back some sweet memories. Thank you.

[@scottthornton9237]

Thanks for posting this, Motorman. We are looking into adding a fairing & windshield on my wife's XL1200C. This video makes the decision much easier.. One tid-bit: Adjusting the headlight after the install is made simple by: Turning on the light, mark the garage wall with tape (where the center of the beam hits) Then get to work on the faring install.. When time to adjust the lamp. Just make certain the bike is in the same exact spot and aim to the tape..

[@59jaguar]

Yes to a good looking and functional fairing or windshield . I went with a National Plexi for my R90/6 and it really reduces wind fatigue.

[@weldermike7017]

Looks great Jerry, all you need now are khaki shorts, black Vans, black socks and a Simpson racing helmet lol, love it, I may have to get one myself

[@GunSlinger840]

dyna bro, bruhhh \.../

[@tarmak968]

Looks great Jerry! I installed this fairing on my 2019 Fat Bob and went with the 15 inch windscreen. Works like a charm!

[@WinningWinningWinning]

Next thing you’ll be doing is making a bagger out of It. It’s your bike but the beauty of that bike is less is better. Beautiful fireplace I’m a fireplace guy. I live north of Chicago in Glenview where the glenview Naval Air Station was.

[@jmora9178]

Now you have to put the bung king rear passenger pegs/sliders. Looks awesome! Semper fi!

[@jam4567]

I am picking up my 2023 Low Rider S this Friday and i ordered this fairing and other goodies....can't wait. Great video Jerry, i'll be using your video for my fairing install and it will be a huge help. I also ride a 2018 Heritage 114 which is the polar opposite of the FXLRS so i think that is a great balance and choice for me. Thanks again for your excellent training videos. Ride Safe.

[@gregyoing5078]

I would just like to tell you "Great Job" on ALL your videos. Some of us have been riding for 40 years. Its a lot of work to put all of these very informative training videos together. I think you do a GREAT job and I look forward to seeing your future videos. Thank you. "Be Easy"

[@0toeknee0]

very nice! I have one on my roadking! If you get strange whistling at higher speeds, take the time to adjust the small screws that mount the shield to the fairing.

[@dennisshepherd3977]

Another nice video Jerry. Thank you. We just put the same setup on my wife’s 2021 LRS. She has the midnight crimson color, so she’s going to get the fairing painted to match. 👍😁

[@cody162]

Excellent video literally followed step by step as far as removal and installation only tuff part is adjusting spacing of brackets spacing of the brackets

[@stephensledge13]

Watching this on silent at work just to see what the fairing looks like on the bike. On my Dyna Low Rider I never really solved my wind mgmt issues. I’ll have to watch it again later with the sound.

[@carcobo]

Thank you Jerry this is exactly what I needed to make that step and add a Fairing. Besides you've saved me lots of money, I was crunching numbers for wire extensions, raiser bars and all of that good stuff. With your video I realized all that is not necessary.

[@motorman857]

Glad I could help

[@anthonyscott16]

Looking sharp Jerry. Listen, if that fairing makes you happy and adds to the quality of your life, then yes, it's worth the five and a half bills. As always, ride safe Brother.

[@1SonorGirl]

I just stumbled onto this video wish I would have seen it sooner. I just recently purchased my 2021 Low Rider S and as Jerry mentioned you definitely need some wind deflection! There are times when the wind is so strong here on Long Island that my rides would get down right painful. The neck strain can be unbearable. I've been looking at possible wind shield options and by far this Memphis Shades setup looks best on the Low rider. I wish they would sell that entire setup as a kit but as far as I can tell its all sold separately. Thank you for posting this video it game me much better vision on the install process.

[@gotpartsonline]

Cool!......Looks like a Great Fit Jerry!.....and Great Job Tony!

[@jetdoctn]

Prefer the look of the speed fairing myself but I understand why you'd want to install this. Memphis shades makes a great product.

[@roys379]

I put a road warrior fairing on my 2020 Lowrider us also I love it I put Tyler bars also

[@vics8873]

Nice job, Jerry. That fairing looks better than the stock nacelle!

[@equaliser2265]

Very nice Sir, glad to see your wife and son under continuous training and instruction. 😆

[@0873sp]

I know this isn't pertinent to the purpose of the video, but is the stock headlight halogen or LED? Also, kudos to Donna on the granite countertops. No disrespect, Jerry, but I sense you're more of an outdoor grill master rather than an interior decorator. 😀

[@docdonna489]

Thanks, Scott!!

[@14theroad1955]

Nice addition Motorman, hey, it looks good without the fairing too...are you planning on putting some type of bags on there for maybe a rain suit and a couple of tools, just in case, you never know...

[@motorman857]

No plans of any bags.

[@michaelmitchell5909]

I always thumbs up sir!.... Looks really nice. So you get no helmet buffeting at all?...how high above the top of the fairing roughly is your face?... My cvo road king come with a small shield that my head is completely above and I get crazy buffeting.... I had a Harley wind splitter on my fatboy and my eyes we're at the top of the shield and I got buffeting badly there also... I'm ready to give up on shields cause I can't stand the buffeting

[@motorman857]

No wind buffeting at all. I'm looking about 6 inches above the shield. By the way this is the vented shield which may be why I'm not getting a wind blast to the head area.

[@michaelmitchell5909]

@@motorman857 ...thank you for responding sir!...

[@rahmatgunawan5045]

That looks good Jerry! I just bought my 2020 Lowrider S looking into raising the bar for comfort, fairing, and then maybe the exhaust down the road.

[@777goldcoast]

Straight Forward👍 Good Instruction👍 No Music👍 Good Camera Work=👍+ Subscribe. Ride On.

[@talkingrock7011]

I think the removable windshield would be nice to have for days you wanted a clean look , are you looking thru or over the windshield

[@motorman857]

I'm looking way over the shield. The camera is on the chin area of the helmet so it doesn't appear that I'm looking over it.

[@AA-fl7tw]

you do need to tighten the windshield screws with a flathead. The vibration from the bike will have you loosing a couple screws. It happened to me and I had to replace them with some screws from the hardware store. And they don't match the plastic screws that came with the fairing. And make sure you use some locking washers.

[@scottpeters2974]

That looks nice, however I like the Russ Wernimont fairing with better wind protection. Check out Matt Laidlaws latest video on the same bike.

[@micahc8905]

Thank you! I think I’m about to buy this for my lowrider s

[@drainmonkeys385]

That fairing looks perfect for that bike

[@jpender100]

Thanks for the video. Is this the 'Ghost' (lightest windscreen) or the 'Smoke' (medium light windscreen)?

[@danadiggins793]

Love your new bike! It looks awesome!

[@michaelcerreto8645]

Really looks good! Harley should have styled it that way themselves. I put a full-sized (Harley) windscreen on my Deluxe and it's one of the best improvements I've made. Without it I was really getting beat up by the wind at speed.

[@michaelcerreto8645]

@Rick Simpson While I out out for a ride on Monday I was thinking exactly that. My average speed went from 10 over to 15-20 over just with the windshield!

[@olegearhead2483]

Thanks for the great video Jerry. This is a must install for my 2021 FXLRS. One question not related to the the fairing install, are those the stock bars, just laid back? If not, what type bars are they?

[@MrMann-gt1eh]

I like the BIG Russ Wernimont.

[@petertrapani8701]

Jerry looks great on that cool wheel nice. Be Safe 🏍🇺🇸🇺🇸🇺🇸

[@aliclark_33]

Did Memphis Shades pony up and give this one to ya?? They'd do well to have the one and only MotorMan as an ambassador! Fun video! Keep them coming!

[@motorman857]

Nope. Not even a discount.

[@aliclark_33]

Ride Like a Pro Jerry Palladino wow!! Guess they’re doing too well to need or want the backing of a pro. Hahahaha

[@motorman857]

@Bill Barnews You're tellin me.

[@jeffreyfaust8027]

By the way that fairing does look very good on the bike

[@paulson9616]

Great installation video Jerry. I have 20 LRS also and thinking about going with Memphis shades RW fairing myself with 11 inch winshield. One thing I hate about my LRS is the rear brake. Rear brake just bites the heck from the factory.

[@motorman857]

Yea it takes a bit of pressure to get the rear brake to do anything. Always use both brakes when coming to a stop.

[@philippebleau4809]

We see three Harleys in your garage. It must be hard to choose which one to ride. Will you part from one? unless your helpful son inherits one of them...

[@pR1mal.]

Jerry, Forgive me if I missed it. Did you have the fairing painted or is it straight out of the box? I was just watching Revzilla's product review and Lemmy mentioned that they are designed to be painted, but that some people use them without painting them. Looks great though, and I think I'm gonna follow your lead.

[@jaytouvelle2359]

What color is the screen and what is the height. I love yours

[@flex-6632]

Looks good, but how does it feel at 75 miles per hour? Excellent video too.

[@lyleswavel320]

Beautiful bike

[@whiterabbitt2002]

#RideLikeaProJerryPalladino Where can one purchase the shroud that covers the head light ? I think the bike looks awesome without the fairing. Also is it possible to add a quick release wind shield instead of a fairing ? Please reply/ Thanks

[@jeffreyfaust8027]

I know you talked about it but did you ever change the risers or the handlebars?

[@motorman857]

Not yet.

[@robertdaley1194]

Which bike is your favourite Jerry?.

[@allankarrer7283]

What is the windshield size in the video ?

[@LegionDe75]

Was there no need for loctite on the headlight bracket?

[@motorman857]

No need.

[@mikeessary4925]

How much of a difference does this fairing make at say 70 mph vs the stock windscreen? Thanks you

[@motorman857]

The stock wind screen doesn't block any wind. This fairing blocks about 50% of the wind at all speeds.

[@ridermotorman1320]

It looks beautiful good job brother 👍

[@BluesHeavy]

are you getting a ton of shake in your mirrors

[@zingzong5]

Pasco county? I’m in citrus

[@stonesmith7776]

I have a 2017 Street Glide Special, and I have been considering trading in for a Low Rider s, how do you think it Compares in low-speed maneuvering and u-turns? the Street Glides pretty easy to do u-turns on but I really like the style of the Low Rider s.

[@motorman857]

The Street Glide is more maneuverable than the S. The Low Rider S makes a fun 2nd bike. I wouldn't recommend it over the Street Glide.

[@Federico_borella]

Hi jerry! wich kind of exhaust you have on this bike? regards from italy ;)

[@norianoriya1524]

教えて下さい 出入りライトウインカーはどこのメーカーですか？

[@The333]

What a great looking bike!

[@user-bl8bn4kb8m]

Less wind?

[@jaytouvelle2359]

How tall are you I am 5-8 and don't know what size of windshield to buy. Do you have a suggestion for me. Please advise

[@motorman857]

Go to memphisshades.com there's a guide on their website

[@jaytouvelle2359]

@@motorman857 it's not worth a shit How tall are you and can you see over your 11 inch

[@motorman857]

@@jaytouvelle2359 I'm 5'7'' and I can see over the shield. Whether or not you can see over it I can't say. But if not, you can always cut it down. I have a video on that.

[@jaytouvelle2359]

@@motorman857 Thanks

[@junesondrab3833]

I should have watched these instructions before the others that were missing information. But I got it on, all good.

[@erhrole]

hey. i dont just like this video i love ALL your videos. thank you for doing the installation video properly. i.e. telling us what size the screws, and bolts are. also thanks for the bonus unboxing. i'm looking forward to ALL of your videos. i also have the FXLRS and just put an fp3 tuner in it. waiting on my eliminator 300 slipons. AFTER that. i will be putting this Road Warrior Fairing on and THEN a PLEX 2.0 system (that one i'm not going to do myself i never mess with batteries/power). i love this bike so glad i upgraded from an iron. ride safe brother and tell your son thank you for his service. comment left. thumbed up, subbed and ALL NOTIFICATIONS ON! you rock!

[@motorman857]

Thank you.

[@Kenevoslcomp777]

What is the stock fairing called?

[@spencerb8609]

Looks good

[@dr.michaelr.foreman2170]

Great, I was the first one here, and number 4 on clicking the like button. I got caught up in the video and missed being number one to click like. Do you have a link I can use to contact the manufacturer so I can find out if one of those fairings will fit my bike.

[@motorman857]

I have all the links in the description section right under the video. www.memphisshades.com

[@dr.michaelr.foreman2170]

@@motorman857 Link does not work.

[@motorman857]

@@dr.michaelr.foreman2170 memphisshades.com

[@daymaker5460]

The new fareing looks a whole helluva lot better than the stock, I would think Harley would have noticed how bad stock looked.

[@jpl8085]

Looks great!

[@baddriver3580]

I'm SOOOO jealous....lol. Looks awesome!!

[@ronaldpoddig6188]

Not a fan of fairings that's why I got the Heritage. Looks good though.

[@gfunk63901]

is this like Karate Kid where you have your son do all these installations and detail the bike and then give it to him as part of a graduation present?

[@motorman857]

Uhhhh, well, as a matter of fact, NO.

[@duanehicks4854]

Come on Jerry we're on to you you're going to give it to him just don't wait too long!! Lol

[@motorman857]

@@duanehicks4854 well, my son tony and his wife are gone to his new base in Italy...they made it safely, so for that, me and donna are grateful...we will miss them and I'll save the bike for him.

[@duanehicks4854]

I wish your son and his wife the very best and I hope you know I was just picking on you!

[@motorman857]

@@duanehicks4854 Of course. I'm a ball buster myself. In case you haven't noticed.

[@yoncruickshank7528]

Beautiful looking bike that's a really nice setup.. if you don't mind me asking how many inches is the windshield?

[@motorman857]

I got the 11'' but I should've gotten the 13''.

[@yoncruickshank7528]

@@motorman857 okay thanks for the info why you preferred 13 because you get the wind in your face?

[@motorman857]

@@yoncruickshank7528 The 13'' would have blocked more wind.

[@J-GIB]

Someone tell me the cons on the new Softail low rider

[@willow9790]

I wonder if someone can tell me if the headlight shroud and silver ring came with the set because mine didnt

[@motorman857]

The headlight shroud and ring is an option. It states that on Memphis Shades web site when you are ordering the fairing.

[@LonerBoi88883]

im having difficulty installing the shroud any suggestion?

[@motorman857]

It's a real PIA patience is the key.

[@Balonishell]

Looks so good.

[@motorman857]

Thank you 😋

[@theway1031]

I get allot of wind buffeting with this fairing and Ive adjusted numerous times. FYI

[@JCunningham21]

looks better then the factory fairing

[@jeremy67A]

If you could get that windshield a little shorter, that'd be perfect!

[@djtchamp5076]

Blue locktite? 🤌

[@piz75]

Good job! How many inches for the windshield? Thx!

[@motorman857]

As I state in the video, 11 inches.

[@piz75]

Ride Like a Pro Jerry Palladino thx! Sorry I had not heard! Greetings from Italy!

[@motorman857]

@@piz75 My son is in Italy and will be there for the next 4 years. He's in the Air Force and can't wait to ride some great roads in Europe.

[@sphiwemashaba2661]

No dislikes!!

[@russellhorn6372]

That's what I like to see. Easy to install accessories. Honda should learn that.

[@paulson9616]

Jerry, with shroud that comes with MS and trim ring for headlight, I tried to install per instruction however, when tight at the bottom, the shroud n ring would not tight and it would not fasten

[@motorman857]

I don't know what to tell you. Mine worked fine. Call MS.

[@RayfordRaySiegel]

That fairing seems nice, except I don't care for the cutouts toward the top. I'm wondering if a Plex Audio system would fit in it, as well as the fairing that was on the bike. That plate that was in it looks like it could be replaced with that speaker system. What is that small fairing style called, anyway? You might check out a fairing of the same style, by Russ Wernimont designs or from this site. www.villain2hero.com/products/t-sport-fairings?variant=31704161452077

[@mihailchehlarov2720]

Looks nice. The one thing that pushes me away from this bike is that ugly factory tumor on the head light. If I ever buy this bike, the first thing I'm going to do is make the front look like Low rider...waaay better.

[@Brian-zg9ff]

According to the instructions that we didn't read...lol

[@visualoutlaw]

"Mounting stuff is a technical term" 🤣

[@93jmac14]

“Do you dislike all bikes that aren’t Harley’s Jerry? Would be nice to hear your opinions on other Makes. I’am a Honda guy because of their easy, cheap maintenance, and durability. While Harley requires maintenance and money spending on a weekly basis and don’t last nearly as long as a Honda’s lifespan.” I always saw Harleys as the Mercedes of motorcycles (Luxury).

[@motorman857]

I like just about all makes of motorcycles. I've owned 8 Honda's over the years as well as Kawasaki's Yamahas and Suzukis and Triumphs. And none of my Harleys have needed weekly maintenance. That went out in the 1950's.

[@Crowbar381]

Would love to see the bike at various angles without the fairing, just so we can all see what it looks like 👍😃

[@meskism7271]

Sand Craine!!!!

[@williaminnes7574]

Looks nice on mate