MP-17 Prowl KO Takara Masterpiece figure review & comparison

[@saysoun752]

My KO version looks amazing with none of the defects shown. Paint is sharp and clean. His leg windows aren't as clear and it only said Made in China without the Tomy. Very impressed and I got him super cheap as I only paid like $25 for him a long time ago. I'm only interested now as I want the official version so I need to know what I'm looking for. The waist is a clear sign of which version is a knock off. Oh, thank you for making this comparison video.

[@DoctorOblivian]

welp this confirms it. I'm buying my masterpieces as Knock offs...

[@wafflman64]

Me and you both

[@Romasrunescape]

I mean, yea, those small details for the nerds, - but for me, for the most part, to have a figure of original cast, just standing in the shelf, and cut the price in half ( if in some cases even more ) - just takes my money and Iam so happy with it.

[@Geeksiders]

Prowl was the first Transformer I ever had. Him and Sideswipe. Got them both for Christmas when I was 6. I'm just now finding out about the Masterpiece series. Now I must have them!

[@roblesdavis6753]

Prowl is my first too, he's a Toys R Us Exclusive.

[@Baldigus1978]

Thank you for this comparison. I bought what I thought was a Takara Prowl only to discover it was in fact a KO. I'm not saying the KOs are bad, just pissed that I paid for the Takara one and got a KO instead.

[@RocketPunchArmy]

Even though the KOs are nice, it sucks to get ripped off. Sorry you got a bad deal

[@drakon32]

Great comparison. I'm going with the KOs from now on. On my Hasbro Prowl, I had to shave down the rear roof tabs that fit right under the siren. Also, one of the tabs on the siren side of the roof was broken. Luckily it still locks nicely. I paid $70+ and it did not come with the shoulder missiles.

[@Jcc2224]

Thanks for your review on this! When I missed my shot at getting the US release at 70 bucks, I decided to try a KO and see how it is, have Prowl and Red Alert on order now. Watching your review and many others, the KO figures seem about 95% on-par with the original. Problems and issues vary figure to figure, every toy's gunna be like that. I saw your video on Red Alert, and noticed the KO's red paint on the chest wasn't aligned as nicely as the Takara's. I also saw a picture of an official Takara with the same issue as your KO. I've also seen some KO Prowls that have paint nicer than the one you got, especially on the black striping in alt mode. These really are hit and miss, but overall are hits. For me, a collector on a tight budget who can't afford 70+ dollars on an MP slightly bigger than a deluxe, it's good to have a nicely done alternative that's not expensive. That being said, KOs suck. They take money away from the company, and it's not right. A part of me feels bad for purchasing a KO over an official one, but I myself justify it due to, like I said, being on a budget. Anyways, great video, and thank you for taking the time and money to bring these to us!

[@wafflman64]

100% agree with everything you said

[@HFalconYT]

Just re-posting this comment here like you suggested : Nice comparison review one again. :) I wanted to point out another paint difference to tell them apart. The Original has the paint of the doors going all the way around the back edge of the door. The KO doesn't wrap around and is only on the front/side panel of the door. Not sure if you want to make an update but that is another sure way to point out the difference of the KO vs Original. Really like seeing your comparison reviews. :)

[@-Skaal-]

TransFormers KO are very very good quality, and very good price !!! KO for me is not a problem !

[@RocketPunchArmy]

N a r b a r i o N but you should also support Takara whenever financially possible. Without them, there are no KO

[@SkyFireDrone2022]

Thank you for the comparisons. It does beg the question, do you really get what you pay for? I mean, should even the masterpiece versions cost as much as they do? And really, why not get a KO if they are still better than mainline toys. For example, the Siege and Earthrise toys are only in online stores so why not just get a KO? I just really want to get a decent Prowl because he was my very first Transformers back in ‘83 or ‘84. I’ve had others loke Armada and Energon but I need to complete the circle. Maybe a KO will fill the gap for now. Decisions, decisions..

[@jasonw3906]

Great review, this put me on to KO's. Wish I had watched this before I ordered Prowl and Lambor, but they are still cool. Your right on it with the differences, I can spot KOs a mile away!

[@RocketPunchArmy]

I have bluestreak KO coming next!

[@famyemil]

Just got a KO...I think there’s a fresh batch. Now it says 2313 and the Tomy is clear. Paid USD30. The usual loose joints are there but my original has about the same. Some minor paint defects as well but can be fixed. Only major problem came without one of the heel spurs, but he still can stand and pose. And I’m keeping him in vehicle mode.

[@DragoonMS]

Finally managed to score a KO Prowl after all this time (consolation prize for being unable to score the MP18+ Bluestreak). Another joint that's crazy tight is in that panel you have to move forward to get Prowl's head out. I think that this is due to really poor tolerances...seems like the bottom edge of it doesn't have enough space for the pinned joint to move properly. Those shoulder cannons don't seem to tab into anything, so I don't think I'll be using those much. I did have minor paint chipping on the hood straight outta the box, though, but that doesn't bother me. EDIT 2022Mar04: Well, then. My Prowl KO had a crazy fail. The car door that's behind his right arm in robot mode wasn't assembled correctly, and the hinge joint eventually snapped off.

[@yuanwang7727]

I think you should just see how red is Optimus Prime.

[@BlueToku]

Funny thing is the old 280z car had orange peeling straight off the factory back then, restoration even orange peel the paint on purpose for authenticity

[@ramonbauza4766]

there looks great to me i got wheeljack ko and there's no problem and he's looks great for display lol

[@covertyankee]

I got Prowl today and he is perfect. I was in shock. He is amazing. I bought the three pack from TF Direct. I got MP-17, MP-19, MP-21. MP-19 had perfect paint but two right arms. Mp-21 was really good too. Bumblebee had a little finger print on the hood. Smokescreen was a big let down.

[@roblesdavis6753]

Very nice, some times you can find a mess up paint job around the window or windshields, I have a K.O. version of Bumblebee and Sunstreaker have a mess up paint job.

[@thedrifter5531]

i feel like sellers should just say KO in the title there's a genuine market for KO transformers people prefer the KO seekers to the official ones personally my KO barricade is amazing only issue is the window frames on his shoulders are a bit lose but like people actively search for KO's sometimes hell KO's are good ways of getting really expensive figures(mp44 and mpm10) at actually good prices that don't make you feel like your getting ripped off

[@markc5193]

i did laugh at the sirens in the background as you finished transformation 😂

[@IlokanoWarrior]

My OG Prowl has a broken door, I’m glad I ordered a China KO to replace it

[@jbmaru]

I'm not a big buyer of MPs due to the cost; I may stick with Takara and get some KOs as well. However there are ways to pay less, with a bit of patience; I've bought most of my MPs discounted at TRU or on eBay. The softer faces of KO Fairlady bots kind of put me off. Yes Takara figures have their own defaults too, however you have to give credit where it's due, it's Takara who invented them, and without them, there wouldn't be KOs either. So I'd say if you want to keep the MP thing going and can afford a Hasbro/Takara, then go ahead.

[@RocketPunchArmy]

+jbmaru totally agree, without Takara we would have nothing.

[@TheActs2021]

Rocket Punch, sorry but I can't afford the Takara versions. Just got my first KO MP today and if it wasn't for the cheaper price I would not have any at all. Now they're a little more affordable. I say better that than nothing. The figure has rocketed to one of the best of all the transfomers (deluxe, voyager, leader class, legends, etc) that I have.

[@RocketPunchArmy]

+TheActs2021 Thats good, just be on the lookout for the crappy KOs, seems they are dropping in quality lately but I dont know how to avoid them

[@ianbarnum]

I have purchased an 100 dollar masterpiece from Amazon. I''m not sure but it may be a KO

[@leepicciotto]

TheActs2021 I have trusted sellers I've been dealing with for several years and collect the kos myself and haven't had any problems.theyve all been pretty amazing for the most part and some(quite a few actually)drastically outshine official products from hasbro/takara. There is a lot of garbage floating around though so not everyone is going to be as lucky.

[@ianbarnum]

leepicciotto I got a 100$ MP prowl. I don't know if it's real.

[@richardtwat5871]

Good review. Based on your detail closeups, my Prowl seems genuine tho it only cost 35 bux with postage. But...my serial number is also H1313.

[@RocketPunchArmy]

If yours was a buy it now with shipping included, almost positively a KO, but its just as good anyways. If it isnt you got it from a crackhead lol

[@SCARFACE-gp4fy]

Ko looks better I have a mix of official and kos like my thf soundwave totally amazing figure nice wratchets no lose joints also got it at a very cheap price.

[@degsy1976]

can anyone advise where to get genuine takara masterpiece? im in the uk, so it appears to only be ebay, but most seem to be ko. dont wanrt to spend 400 quid on something that turns out to be ko.

[@Fu-Reviews]

Awesome review, man, and I always love the comparison videos. I can tell you do a lot of research looking for different parts, etc. Great work! My KO Prowl had the same loose shoulder gun thing on his right side, but the silver on both of the exclusive Rocket Covers was perfect with no flaking or defects at all. It sucks one of yours was faulty. It's amazing just how good these KO's are. ^_^

[@QuantumSurge64]

Don't forget about the KO's I mentioned on your review...the high quality G1 KO's, that is.

[@RocketPunchArmy]

I am lucky enough to be able to buy originals. Believe me, I have laid money down in the past for robots, but there is something mysterious and underground about the KO. Just hold one in your hand and wonder, how did this get made? Who takes such pride in their KO work? How is this even possible? what has to happen for these to exist?..there are so many questions and so little answers which is mind boggling that it is now in your possession. What adventures occur for these to end up in your hands. Weird questions I know but thats what makes it fascinating. I thnk if I found out how these are really made and its not a crazy story I probably wouldnt like em so much, but not knowing makes them all the more mysterious. Like UFO's lol

[@QuantumSurge64]

RocketPunchArmy Bootlegging can be interesting!

[@RocketPunchArmy]

In my line of business I have come across counterfeit money (not talking about ink jet printed amateur stuff) and It fascinates me how these come into existense. Some come from terrorist activity, drug cartels, crooked governments, etc etc. So it boggles me all the stuff that has to happen for this money to exist. Did someone smuggle this in their butthole while on a canoe over from afghanistan? Did some mafia dude carry this in a briefcase across the country only to be stopped by some competing family ,got whacked, got briefcase taken from him and then got distributed through crime channels? Was this dropped from a plane by a drug cartel only to be fished out of the water by some maniac crime boss who used it to buy a pair of sneakers at a Foot Locker where a young girl who cant identify fake $100's took it thinking it was real? this is the shit that goes through my mind when I hold a KO, maybe it hasnt seen these type of extremes but who knows what the history is. So was my KO smuggled in somebody's butthole? doesnt smell like it but who knows

[@Fu-Reviews]

HAHAHAHA! ^_^

[@BKTCharlie]

I was referred to come here by a Facebooker. I am new to the MP scene and I have only gotten three MP's. . Two Takara Tomy and one Toyworld. I want to say thank you for this video and I will be looking at another one because I was worried I got a KO. I am not a fan of them and I believe in getting the authentic items. And I pleased to say that my Prowl MP-17 is not a KO. Thank you again!

[@kurenaisgamingchannel8998]

today its 2021 and its really hard to find the Authentic Masterpeices so im just thinking of getting a KO. Anyways thanks for the reviews

[@jeromekennedy330]

I love the KO I have two of them and in good condition

[@slg565]

I was never sure to buy a KO, but now I think I'm going to get prowl. Thanks!

[@RocketPunchArmy]

SLG Grab at least one KO to try em out

[@slg565]

RocketPunchArmy I ordered Prowl, because I love the Nissan Fairlady. I hope its a good one :D

[@RocketPunchArmy]

SLG cool, let me know what you think of it

[@slg565]

RocketPunchArmy It was so good, I ordered the gold Sideswipe.

[@rusticodeveraii7284]

KO to arrive today by mail

[@UnicronsLeftNut]

I ordered a FansToys Koot from TF-D and it was *horribly* packaged and the upper right corner of the box was totally mashed. The only thing that saved it was the FansToys hard styrofoam inside the Koot box. Not thrilled with their packaging AT ALL They need to start using bigger boxes because there's zero room for any bumps that happen during shipping.

[@RocketPunchArmy]

Did they at least put the hard corners on the figure box? I agree it should have more space but it will prob make it cost more

[@UnicronsLeftNut]

@@RocketPunchArmy No hard corners but if you saw the box when it arrived it wouldn't have helped at all. It was poorly packed and damaged so badly during the delivery it was taking a rounded shape. Almost no side was flat when it got to me. Thankfully Koot survived the trip only thanks to the hard styrofoam FT uses. It's made me very afraid to even order there now. Not much i can do about it though, but you're right. They'd probably charge even more for bigger boxes.

[@raimiranda126]

A glue or a nail polish as I apply to most of My figures. I have the original but I'm also planning to get the K.O. coz of the glossy chest and give away My original as a gift to a child.

[@kyllerkill]

If you can’t afford the original I say buy the ok all day and twice on Sunday. I don’t have over $100 to spend on a six inch figure.

[@thatmayanguy1591]

i actually prefer the duller orange on the blinker lights than the bright orange on the takara. the bright orange seems like a toy color while the dull orange looks more real

[@tanisauchiha]

The Prowl K.O Takara Tomy is better than Prowl Takasa Tony?

[@deathbringer2000]

u get the rocket boosters if u buy it from amazon or japan

[@John16v]

Thanks! Great review! Just a heads up. Before ordering this from Ebay make sure you ask if it will come with the CANNON LAUNCHER. Because my prowl didn't come with it.

[@lwc888]

I got mine in the mail today. The biggest problem I noticed is that the shoulder launchers are super loose so that the missile launches rest flat on his shoulders instead of pointing diagnally up.

[@RocketPunchArmy]

lwc888 you can squeeze a bit of super glue into the swivel and keep flopping it back and forth til it dries, this should stiffen it right up, just dont stop til it dries or it will seize

[@darylgarza645]

I thought the KO's were not allowed to use autobot or decepticon symbols......

[@CliffJacker]

I cannot find a KO prowl anywhere now!

[@brainysmurf74]

Dude, that shite is made in the same factory. The KO is just a slightly less refined version where they don’t sand the mold as much.

[@VirussRuss]

man can wait to get in my hands the lambor if is as good as the one on you video will get this Prowl as well. Great video man and again thanks for sharing

[@RocketPunchArmy]

VirussRuss yeah once in a while a lemon pops up but Ive had pretty good luck with KOs so far

[@Zener27]

Hola, conoces alguna tienda o vendedor donde pueda encontrar takara original 100%, gracias

[@RocketPunchArmy]

bit.ly/2Wy1q99

[@OwzatOllie]

Just got a KO Prowl and It's pretty good actually. Not as good as the official but hey!

[@RocketPunchArmy]

OwzatOllie exactly, but hey! great alternative

[@plzfollow]

I just noticed police sirens at 11:16 and in the tiger track vid we heard your neighbor's lambo. Weird! haha

[@RocketPunchArmy]

VJ PLZ Yeah it is lol, Damn kid and his lambo showing off

[@ramonbauza9466]

They looks great to me

[@razorclawtiger]

takara is better, but not by much, price of the ko is worth it and the head mold is great. i decided to buy the ko version with cannons for less than 40 dollars with shipping a must have........

[@RocketPunchArmy]

Razorclaw Predaking Not much difference between this and original, enjoy the KO

[@EricTron]

Is there a problem with the head tilting up? Because on mine it doesn't tilt up that well

[@transgeek2345]

Just bought MP36 Megatron from Takara. I paid my dues for the company, buying pure KO MP from now on, thinking between Hot Rod, Silverstreak, Prowl, or Maybe a Conehead. which one should I start off with?

[@RocketPunchArmy]

transgeek2345 i would say try one of the autobot cars to start off with. I dont have the coneheads but I hear they are amazing too

[@miragexl007]

KO Wheeljack. I see he's on Ebay now. I impulse bought him hoping the same quality as others....for half the price. been waiting for awhile for him to pop up. When you gonna get him and review? your vids have been very good. thanks

[@RocketPunchArmy]

miragexl007 He's already on his way so it shouldnt be much longer!

[@miragexl007]

RocketPunchArmy ah, beautiful. hope and assume this first outing of it is up to par since so many MP KOs have been out and seem very nice. cool.

[@degsy1976]

now im confused. my prowl seems to be a mixture of both somehow. the plastic insert has a mould for the shoulder cannons, which were included, but the poster thingy is exactly the same as yours. the reds are very bright, like your takara, and the tail lights are good, but the orange headlights are dull. giveaway is the white on the croth doesnt go all the way, the wheels have the centre piece, and the foot just says made in china. nothing about tomy. i also only paid 20 quid on ebay, so guessing thats a giveaway. the sellar assured me it was takara. not much difference in appearance though. no one who sees my collection will know the difference. just discovered the bumblebee ive bought is also a KO.

[@jonbeckstein8044]

I wound up buying 4 robots at a con. And the guy reassured me that all were real. Only the Thundercracker was real. My prowl, wheeljack, and smokescreen... not so much. A few of my online friends said I should be cool since the ko's aren't that bad.

[@RocketPunchArmy]

as long as you didnt pay full price youll be good

[@christophersoprano-sculptor]

Very helpful information. Thank you very much!

[@Mundane05]

Does anyone know any other way to identify a KO from a real MP? I mean I look for faded, low quality Japanese characters, sloppily-placed tape on the sides and always check for the punched-in serial numbers under the "Made in..." section on the bottom.

[@covertyankee]

Have you found that there is one K.O. that is for the most part always good? In other words have you found that there is a K.O. mold that is consistently better than the other K.O.s?

[@RocketPunchArmy]

only way to answer that would be to come across a few but I cant really say if there is one that is better than the other. There is no one thing that is always consistent I guess is what im trying to say.

[@metubeaccountko]

hi sir. i ordered my KO Prowl and Streak on ebay and it didn't come with shoulder missiles. does it depend on the seller or the packaging from factories?

[@TheActs2021]

+metubeaccountko My KO Bluestreak did not come with any additional attachments. I ordered mine from Amazon (which came from China). Might just depend where you buy it from.

[@metubeaccountko]

+TheActs2021 yeah looks like.

[@slaiferx000]

friend how much weight the box, when you 'sent him? thanks for this excellent video

[@RocketPunchArmy]

slaiferx000 Its really lightweight. The box is small

[@miragexl007]

Thanks. so they are making true Knock Offs now and it's legal? curious. I've always wanted the real stuff....because all the KOs back in the day were kind of crap..now I wonder...if the quality is about the same if not the same or better, why pay the prices? I'd like to think the "real" thing is better quality-stiffer. Still sucks I think. So the KO just reverse makes theirs?

[@RocketPunchArmy]

miragexl007 I dont think its reverse engineered. I think they copy schematics of the mold, probably given by the factory who is making the legitimate ones. There are still crappy KO's for kids but these are menat for collectors so are built as such

[@RealGio21]

I just bought a knockoff as legitimate, payed 130$ for it, says made in China and you can smell the difference. I’m asking for a refund because I found knockoffs for way way cheaper

[@tivulandia]

I have got a "KO" of Prowl just today, but the box is completely different from Your one: no "transformers masterpiece" logos at all, no barcode, no hologram. The code is "C P-17" and not "MP-17", the brand is "Takasa Tony" and not "Takara Tomy" like as the one You've reviewed. Are You sure You have reviewed a "real KO" and not two "genuine Takara"? Please let me know, thanks! I'm afraid the are different kinds of KO on the market...

[@tangstanky]

The code doesn't seem to work. It says "You have not reached the minimum order total for this coupon." Did he change the coupon restrictions?

[@RocketPunchArmy]

Thomas Stanko yes, the code is now TFRT5 for orders over $70. Thanks for watching!

[@ActionAwesome]

RocketPunchArmy That is a bummer. I liked that coupon!

[@RocketPunchArmy]

coupon is now for $55+ using RPA5

[@methmam4247]

I got K.o mp 17 prowl and it was terrible every joint was lose and its face was not painted. It was just a blue blob of paint

[@RocketPunchArmy]

+Michael Pavlis The KOs are getting very sloppy lately, especially if they dont have logos on the box. Those seem to be the worst offenders

[@chevy-is-a-good-boy]

Really appreciate these comparison reviews... I'm guessing you've probably got the MP-12G KO on the way? :-)

[@RocketPunchArmy]

Is that even out?!

[@chevy-is-a-good-boy]

RocketPunchArmy Within 24hrs the first batch sold out! The same seller now has another batch, for a slightly higher price than his first lot. Hit up eBay now, he's got 10 left, as of my typing this. I'm probably going to buy two for myself, (plus an original) as I want to display this figure with different stickers applied to each one.

[@RocketPunchArmy]

OMG it is out lol

[@chevy-is-a-good-boy]

RocketPunchArmy Yeah, the first batch went super quick. I want to thank you again for your comparison reviews... if it wasn't for your reviews, I'd never touch a KO Transformer. The KO's really aren't inferior to the originals, they both have different flaws to each other, but that's about it. And they cost half as much! man, it's a great way to own duplicates of the same figure.

[@RocketPunchArmy]

exactly, they arent inferior to them, but I always say they should never be a replacement. People will argue that buying real ones along with KO does not justify things because KO makers pockets are still being filled and I agree. I dont buy real to justify the KO purchase, I buy real to support the company that invented it. However, i always like to have a duplicate to mess with. However I would never buy a duplicate real one. Too expensive, but one real and one KO, yes, so technically they arent losing money from me because I wouldnt buy another real one.

[@VirussRuss]

What up main I got Lambor KO has a couple of issues but is a ko but still is awesome I fix all the issues on him but he looks awesome man will try to do a video of it but my next Ko will be this Prowl he looks so bad ass I wish I had the money for the Original ones but I would have to sale more stuff I’m selling some of the figures that I have that I just don’t want so hope I can get more MP’s want to get Wheel jack original and bumblebee so hope is good sale for me this year to get more MP’s Ko’s or original. The Lambor that I got had a problem on the waist peg it was to big to peg in I just cut it out and it went in and peg in very good had a chip of extra plastic on one eye I also remove it the paint is cool no complaints on that the shoulder cannot it’s stays lose will fix that as well and the hand gun is lose on the hand peg another thing that it has is the knee join is a little bit lose but it has a screw so I will unscrew it and put a little bit of crazy glue so it can be more solid even with all of those flaws he still is pretty awesome looking at him at the side of generation swipe well is just awesome. - Great video man and again thanks for doing this type of videos

[@RocketPunchArmy]

VirussRuss Seems like yours had a few issues but I am happy to see that you know how to overcome them. Surprisingly enough, during the Holidays, Toys R Us has MP Prowl on sale for $32! Same price as KO. I almost bought one but I'm fine with the ones I have

[@VirussRuss]

yeah I notice that but the figures just fly away dint find any all gone man so sad :( LOL well the next KO MP wil be rumble and Ravage for me and then Prowl or maybe both LOL RocketPunchArmy

[@flyer3154]

@@RocketPunchArmy I'm about to get this (ko). Can't wait get it

[@baxterstockman2191]

these Taraka originals cars go for around $150-$200NZD on ebay. then depending on shipping thats another $60-$114NZD. ouch my wallet

[@anomaluigi]

How is it legal for these companies to make practically exact replicas of a licensed product? This really makes me not want to collect these anymore

[@RocketPunchArmy]

anomaluigi Its not legal at all. Only explanation I have because of what is known about the KO industry is that in order to get them this exact, they have access in the factory of the original design files and create their own molds with very minimal adjustments. You can literally exchange MOST parts, not all. I discovered this when dismantling my MP-10 KO. Not all parts interchange. But enough to prove that they are based off original designs, not factory rejects like some people say. There's no need to stop collecting these, just stay away from knockoffs and only buy original. These videos help you distinguish which is which.

[@shawz10]

Hey man great videos and a service to the fans What do you think of the chance of toxicity from KO's? I always wonder since I've heard of a lack of safety standards in Chinese factories.

[@RarebitFiends]

It's been 5 years and no one has given you an answer. 😞 I can help though: you should not eat your KO Masterpiece Transformers.

[@Fenrir72]

Appreciate the effort but the presentation would have been more effective with the actual Prowl package and not the Smokescreen box.

[@RocketPunchArmy]

thanks, thats the idea but its not always possible. I dont remember why I didnt have it with me. Possibly in storage.

[@Fenrir72]

***** Nothing beats the original. Trouble is, all sold out (the 2nd re-issue) this coming May 2016. If you are after them for the sake of having one, get the KO. If you really want the original...............

[@mikesgtrs1]

I know KOs are a Taboo subject but so far the KOs Ive seen sometimes look identical or better then the overpriced Takara versions.

[@RocketPunchArmy]

To some they are taboo, to me they are a novelty, a display of current technology and a testament to succesful reverse engineering and duplication in manufacturing circles while providing the consumer a more affordable means of acquiring a product...or something.

[@1987olds442]

Great review, I wonder how long it will before we see their Bluestreak and Smokescreen? On their Smokescreen I hope sine they seem to making their own molds they could make Smokescreen's alt-mode look more like the actual race car with the wider rear quarter panels and side intake vents. alex62.typepad.com/imsablog/images/devendorf82.jpg

[@RocketPunchArmy]

If they did all the sideswipe molds version plus the gold one, then I bet they will do the same with the Nissans, I doubt very much they will change the molds even if theyre making new ones. A possible theory that I came across from some research is that the KO people borrow the 3D CAD designs and slightly modify them. That is why they are very very close. It would literally be a matter of clicking and dragging slightly then having a machine cut the molds

[@RocketPunchArmy]

Well the MP-12G is out there now, so It should be safe to assume the rest of the Nissans are also going to be made. Hope they do some color variants

[@reymed1670]

Real ko rule

[@ELECTROCREEPERBLAST]

this transformation is going to be hard because i dont have nails

[@gmon78]

Matthew Andes It's been two years now, have they grown yet? :)

[@brizzle805]

Mine came with a red attachment

[@RocketPunchArmy]

brizzle805 I think it depends what they have laying around

[@thesilverfalcon]

Your mileage may vary! In the very first transform, my KO Prowl broke at four different places at both shoulders so that both arms fell off. The legs are really loose and floppy, and there's paint slop all over. Worst Transformer I've ever gotten. :(

[@jonbeckstein8044]

I spent $75 on all 3.

[@RocketPunchArmy]

thats dirt cheap for MP KO. you did good!

[@jonfoy6477]

I'm getting two KOs for 30 each

[@methmam4247]

Yeah it is horrible

[@Wiggywoo1977]

The autobot logo is off centre on the K.O.