This is Peak Micro ATX... | Jonsbo D32 Pro Gaming PC Build | RTX 4070 Super

#pcbuild #jonsbo #asuspcdiy - We've seen the Z20 and the D31, but what if they combined? Well, the D32 Pro certainly comes close! Let's talk about that.
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A Calming Intro
01:51 - D32 Pro Overview
02:39 - Build Hardware
03:09 - Motherboard Assembly
04:55 - D32 Pro Assembly
08:10 - Airflow Visualization
08:29 - Cinematic & Desk Setup
10:24 - Coffee Thanks & Outtakes
What really defines 'Peak Micro ATX' ? Well, it's small... it has the ability to support a Strix RTX 4090 and the colossal Noctua RTX 4080... very little space wasted inside, whilst retaining a low cost and high build quality. Throw in the support for reverse motherboard connect and that's quite a large demand for such a small case.
Jonsbo are an illusive brand here in the UK. Whilst we can find them in places like Overclockers, it seems like all new releases take at least a year to make it to our market which blows my mind. Anyway, cut to present day and as luck should have it, a rouge D32 Pro appeared for sale finally!
I went into this build with similar expectations to that of the Z20 recently featured on the channel. The materials and overall build quality are much the same, including some typical Jonsbo style quirks along the way. The D32 Pro is much more spacious however which lends it's self for more airflow and great GPU compatibility which is a winner!
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case: amzn.to/3ChKvzD
CPU: amzn.to/4fXOajW
GPU: amzn.to/4hjR4Rb
RAM: amzn.to/4aqNlPG
MOBO: amzn.to/3E0abkV
PSU (850w): amzn.to/4jlKc7C
PSU (750w): amzn.to/3Cch7ee
Cooler: amzn.to/3PI7lUm
Storage: amzn.to/40lct5E
Fans: amzn.to/4jkGHhE
Keyboard: amzn.to/4akHF9N
Mouse: amzn.to/4g5gvoH
Speaker: amzn.to/3WorYbS
Monitor: amzn.to/4e7IIu7
Coffee Machine: amzn.to/4apOwOY
Main parts included in the build:
(UK Amazon)
Case: Coming Soon (I hope)
CPU: amzn.to/4arHjye
GPU: amzn.to/4anDUQK
RAM: amzn.to/4hjRhUt
MOBO: amzn.to/4akI0cz
PSU (850w): amzn.to/3PGZTc0
PSU (750w): amzn.to/3PG71FC
Cooler: amzn.to/40jrx3z
Storage: amzn.to/3PKFeDG
Fans: amzn.to/3Wp9EPD
Keyboard: not available
Mouse: amzn.to/4hogYmZ
Speaker: amzn.to/4hfKgUs
Monitor: amzn.to/4778eh2
Coffee Machine: amzn.to/40lcTsK
As an Amazon Associate, I may earn from qualifying purchases.
Micro ATX is always my go-to form factor. Building with the D32 Pro was a pleasurable experience with some really interesting stages. I particularly liked to see the back connect motherboard support, this should hopefully grow even more as we progress into 2025... Perhaps a revisit with this case later is in order for that?
Read our full thoughts on this build here:
www.mrmattlee....
What's your thoughts on the D32 Pro? Let's chat in the comments!
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
☕☕ BUY ME A COFFEE! ☕☕
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
www.buymeacoff...
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
/ mr_matt_lee
/ mr_matt_lee
/ mrmatthewlee

[@Mr_Matt_Lee]

Would you consider downsizing to Micro ATX? What’s your thoughts on smaller form builds in general? Read our thoughts here 👉 www.mrmattlee.com/post/jonsbod32

[@richardfarmer6570]

I have a FormD Ti which is under 10l so I would be increasing the size of my case to go with the D32 and no I wouldn't consider it.

[@zingwilder9989]

Personally, If I was building more of a budget machine with hardware such as a 12400F with a 4060, it would be ideal. However, for anything more potent, I'd want more airspace that a mid-tower would provide.

[@ЮрийПлаксин-з9ш]

Это супер, т.к я постоянно переезжаю у меня у самого сборка формата M-ATX но в корпусе Jonsbo D31,было бы познавательно смотреть ваши сборки и с какими комплектующими вы собираете чтобы в дальнейшем можно было что-то в своей сборке апгрейдить на более современное железо 🙂 ,в данный момент например у нас в России большинство собирают сборки в формате M-ATX мы за компактность и производительность ну и конечно-же за красоту 🤗

[@R4gnarokLPs]

I Already am on Micro ATX, i am using a Jonsbo Z20 myself, had to get it trough AliExpress but i am really happy with it.

[@BeefIngot]

MicroATX is the perfect size for the majority of people, what sucks is that there is less board choice there. I want 10 gbe Ethernet and ECC support. you can only get that with full size ATX.

[@Saurion1]

Jonsbo is killing it with their cases lately. I wish they were sold in my country.

[@adonromadhon3630]

where are you from? bangladesh? lol

[@Saurion1]

@@adonromadhon3630 nope, Argentina.

[@WolfzPain]

aliexpress

[@Saurion1]

@ massive shipping costs. And customs.

[@WolfzPain]

@ on ali 50$ and 50$ shipping (to Ukraine, I think it's even more far away then shipment to Argentina). 100$ its not big price for that case. Also I see 90$ with free shipment. this case is out of competition so 100$ not so big price

[@Whistix]

need more matx builds like this, awesome

[@jawajede]

I really lik this build. Especially the hotswap feature of the cooler fans. Great build Matt, as always.

[@Mr_Matt_Lee]

The cooler fans being a simple ‘click on, pull off’ should be a new standard for sure. Glad you enjoyed it! ❤️‍🔥

[@Sameer_Kitkule]

I'm really fond of M-ATX builds, and this looks like a PC you can take to a LAN party. And I really like the fact that cases like these can pack so much power into a small form factor. And I also like those minimal accents, gives the PC a look of something very clean and very sophisticated. Nice work, Mr. Lee, and greetings from India! 👋☕

[@LunarDrift0]

it's been a long time since LAN party popular, what a great time to be alive

[@mhizzudin]

except dual chamber matx cases haha. that thing is big and wide

[@emiliogirelagonzalez1809]

I recomended you look de jonsbo z20 its has a handle

[@moneymoneymoney_534]

people still have lan parties?

[@JBcreations-p5u]

Love the toolbox setup and just about everything in the studio. The lighting is amazing 😊

[@uBreaky]

I've watched a lot of your video recently, These visual, cant' imagine how much time you passed for enjoyable shot, It's artistic! You're doing amazing job, thanks you for that

[@lukasprovetti9057]

STUMBLE ON THIS CHANNEL BY ACCIDENT, ITS LIKE IM WATCHING A MOVIE, BEATIFULL JOB YALL

[@gpredd1]

Good to hear your voice, ❤ that case fits in mine twice. I love those small builds. God bless you Mr. Matt. Keep talking, it’s really cool. 😊

[@asterisk4424]

Jonsbos lineup has been so sleek this past year. Everything they've been making has been solid.

[@apollostudios7181]

i love these micro ATX cases, i love the idea of fitting as much power as i can in a smaller case, this was an awsome video.

[@itzamedave6242]

Loving the studio upgrades coffee station is amazing build ain't half bad either

[@Mr_Matt_Lee]

The coffee station is secretly the main focus of the video 🫣😅☕️

[@itzamedave6242]

@@Mr_Matt_Lee its no secret mate lmao

[@MrTARIQSs]

Jonsbo have been cooking lately I absolutely love my TK-1 v2.0

[@buriedbits6027]

This is an absolutely stunning build. Your attention to detail and the way you present each step as a visual narrative is truly impressive. I wonder if, down the road, you might consider expanding your content to include interviews with case designers. It would be fascinating to hear about their vision, the challenges they face, the design choices they make, and even see some of the prototypes they’ve worked on. Getting their perspective could offer a deeper appreciation for the artistry and engineering behind the cases we use and enjoy. Much like how Apple once highlighted Johnny Ive, I think it could be an incredible addition to your already amazing content.

[@Mr_Matt_Lee]

Thanks, I appreciate that. Oddly enough, I started planning a quarterly series back in 2023 for exactly this… but then I placed more focus on just making my own videos and growing the channel. That’s not to say that I wouldn’t still consider it… let’s see what this year brings! Appreciate you being here for the journey! 🫶

[@bipolarbroccoli]

okay, the case is good, but the way he presented it in this video is spectacular. excellent job in everything from camera angles, backround music and overall vibe of the video.

[@Lorkran]

Thanks for the assembly in a new interesting case) It sounds just lovely. And thank you for a wonderful evening.

[@SaintVes]

Perfectly designed airflow for a case like this. Love it, well made stuff!!!

[@ZackHalverson]

Great case, good airflow. I am waiting for the white D32 pro in the mail.

[@carlosbarrantesb]

As a coffee lover and PC enthusiast, I approve this.

[@DanIsNotHome]

I'm not sure why, but the panel twirling as you removed them, then the fan filter had me lmao, so extra 🤣

[@Ladioz]

Wow, airflow is great in this small system! well done!

[@MortalHooman]

omg dream build, not to mention that case is not as expensive. More mATX pls!!

[@Afit4.5.0]

wonderful assembly👍 I'm not a fan of compact cases, but I liked this build. You deserve an extra cup of coffee☕

[@d0gmaticsoul]

The case and build is one sexy beast. The clip for that m.2 slot was smart, didn't have to screw it except the shield.

[@BitcoinNoddy]

i have mATX from 2018, still loving it. awesome vids btw :)

[@Ruiso7]

Love that mounting bracket design for those coolers, love the case and the build, don't think the rear exaust is doing much, love your videos too.

[@Orochiiiiiiiiiiiiiii]

It has become my fav case of the year

[@wheelr1991]

Most beautiful matx build in the world. Amazin job, i love your videos!

[@cheekster777]

Nice, coffee corner upgrade! 👍🏻 ☕️ Thank you Matt.

[@Mr_Matt_Lee]

You have no idea how much I’m in love with that new section of the studio specifically 😅☕️

[@cheekster777]

@ - That Acaia Orbit coffee grinder deserves at least a Sage Dual Boiler espresso machine!

[@Mr_Matt_Lee]

@ I would be included to agree, but I’m a man of very simple pleasures and the Gaggia EVO PRO with a few tasteful mods can pull a lovely espresso for sure! 😅

[@McBane.]

Pretty impressed that the Arctic 36 can effectively cool a 14600K! Awesome vid always :D

[@BlackAera]

The brief case introduction before the build is a nice addition

[@DominoSurvives]

I finally got to build a new PC after 5 years and went with a Micro ATX build with a Lian Li A3. I LOOOOVE it so much. Can fit my 4080 no problem and the case is more portable and fits on the desk a lot easier.

[@pdiampro]

Loved it.. very minimal and compact build.. love the case.. and the aesthetic.. hopefully someday I'm going building something for myself.. 👍🏾

[@auroraflash]

I like that you always create builds like people would do: You use components that are from the same cost to performance tier.

[@onozioo]

the quality of this video is immaculate

[@maxhiggins6270]

I did a build in an ASUS Prime case you featured a while back. I used this combo of Artic air cooler and case fans, and the airflow is amazing. I get better flow with my mATX build than I did with my fuller tower build (I'm also forgoing glass panels and sticking with all mesh panels). Anyway your videos are very chill to watch and make me just want to build new computers over and over. I'm not into big flashy builds anymore. Functionality and clean aesthetics are the way to go, as showcased by your videos. Well done!

[@csaszyyyka]

Köszönjük a minőségi videót ímádom Matt! 👌

[@SkullAngel002]

Came for the great build, stayed for the bloopers 😂😂

[@richardfarmer6570]

Nice build. I really like that 24 pin cover, really cleans up the inside of the case.

[@Yippeekayay.]

Watching this is so relaxing

[@theLizardof0z]

The PC I built in December is damn near identical to this, only in a Corsair 3500X case, Gigabyte B760 MB and an AIO. I know this set-up works like a champ! As always -- well done.

[@BrianjeffWATXOK]

You read my mind! Thanks for doing this build dude.

[@erickvillarce4806]

Jonsbo D32 Pro si lo subiste 😯😲

[@easonlin4292]

Mr. Matt Lee do the great job . Thanks your build videos , always clear and beauty

[@easonlin4292]

Can you try to build the Jonsbo TK-0?

[@crypkripke5206]

I have the jonsplus i100 and could not be happier.

[@drmauricio]

Love m-ATX cases. I'm very happy with my z20 🥰

[@ms.stability]

i bought this freezer and omg its freaking good and nice looking

[@klausschleicher523]

As always a very nice build video. The single shot grinder looks great.

[@wood6454]

My favorite type of case to build in. ❤

[@christinehede7578]

Not a coffee fan, do love computers. Ps, just finished watching, what a lovely minimalist pc.

[@Cyn_real8]

Really like the minimalistic design of this case, it honestly looks great for it not actually being all that flashy.

[@Toulzah]

Nice one, Matt! Way to make me jealous for selling the case to you.. 😢 -Connor from eBay

[@Mr_Matt_Lee]

Connor! I wondered if you’d appear in the comments 😅 Thanks for the open and honest listing, a pleasure to meet you too. If you do get a genuine sense of separation from the D32, I’m just a comment away 🤓

[@ileiad]

Wow, uploaded just hours before I ordered mine. I've watched your Z20 build many times because I'm debating whether I should get the Z20 or this. I guess I'll make my own handle.

[@DARTHLT9807]

Love these smaller form factor buids..so many ideas pop into my head. Hopefully, you'll do the Montech Heritage soon. That case made we say "OH!!!!" the first time I saw it.

[@richsilvestri7704]

Pretty sweet build, I just built a budget gamer in a white Asus AP201, this looks a bit smaller then that. Digging the build thanks, Matt!

[@The_Drawing_Artist]

This is a really slick all black non rgb build👍

[@johnc1913]

Upgraded to the Gaggia classic! And the Acaia Orbit grinder?! Mans not messing around in 2025

[@jamesasis]

i was looking at this case on the net then boom! MrMattLee got a hands on it

[@shaunmaxwell2745]

That fan mounting on the CPU cooler is money.

[@ArtemSlash]

Another one so beautiful case from Jonsbo 👍

[@sh0gost]

I was surprised that Matt didn't put second top fan. 🤔 Anyway, nice build, cheers, mate. :)

[@matthewrezuke8130]

He has a video on airflow to explain why. Cuts off airflow to the cpu cooler.

[@marktekk4982]

When it comes to visuals you are the best mate, i just wish you were also doing thermals and noise. A lot of cases look good, are good to build in, but can potentially be hotboxes and/or noisy.

[@Dying-wq2ot]

Been waiting for you to build with this case cause im planning to buy jonsbo d32

[@tvandever2010]

Simplicity in Elegance!

[@TDylanX5]

Can't wait for you to build with the 50 series!

[@paulwells3084]

sick build man, I just built a machine in the Lian Li A3, seeing this case I just might have to use it next.

[@magtral]

Hands down my all time favorite micro ATX case, still using the TK-1 Black series.

[@Markozzy]

Really enjoying the small factor builds at the moment jonsbo so underrated they make some unique cases

[@mrtayda]

how is this even possible, a month ago I assembled exactly the same assembly but in a different case, motherboard, video card, power supply, processor, RAM, all this is identical))) I'll make a video soon)))) you inspired me)))

[@macbaconboi6382]

Love my montech air 100, matx is the way to go and you can’t convince me otherwise.

[@knightempest]

I cant get on time lately been busy with college but still relaxing to watch

[@NAMze86]

Perfect build! 🔥 🔥

[@audian666]

some 4070 super love !! love mine !

[@blocthoc]

i got this case last week. but cant believe it fits a full atx psu in it! waiting to put the 5070 in it

[@Ramash440]

Screw the computer, you need to run us through your espresso setup. Specially that black Gaggia, it just looks so neat.

[@titanuranus2136]

With the D31 I found that there is a small benefit in temperatures and noise if you raise the case up, can test by putting something under the feet. I'm not sure if the D32 is the same. I made wooden feet and painted them black with a hole in so I can get to the screw. Great video as always. I watched your D31 video prior to buying it, your videos make a very good reference when comparing cases.

[@auroraflash]

Yeah, people gotta be aware of Jonsbo!

[@miguelbauza2863]

Gaggia...Man of Culture!!

[@purveekvipul2051]

I just built in this case 3 days ago. It’s soo much better than my previous nzxt h510 aesthetically and practically . One thing to note is that although you can install ssds and hdds, it wouldnt work properly unless you’re really good at cable management. I had a 2.5 ssd and hdd that I wanted to transfer over but I couldn’t because the back panel wouldn’t close because of the sata cable. I’m not sure if it’ll work with a smaller psu since I’m using an atx one. I also had a fan hub that I couldn’t install due to the same reason. So if you’re planning on building in this, you’re better off with m.2 ssds and plugging your fans into your mb. Currently, I think this is only available in China so Ali express if the place to buy. I bought it from a seller who had the most sold. Took 6 weeks to come to the uk. If you buy this, buy the pro version

[@Dzachman808]

This whole vid is a vibe.

[@chriseebocus]

I really hope this case will be available in eu....right now I'm thinking about the lian li a3 for my first buid...but if this drops in italy, I'll have another option xD😂 awsome build as always! Great job! 😊

[@InitialANSR]

dammit Matt how did you know what is my exactly build . Next week I will grab my first ITX build and pc

[@youtubepremium5799]

Background music is wonderful

[@Dragobit89]

small and powerful, the perfect combo

[@jhonrock2386]

Loved the case! The PSU on the front was quite the interesting idea. Nowadays, that space is, most of the time, wasted. Until not long ago, I was more into big cases, nowadays, not anymore. I want my rigs to be compact and pleasant to the eyes, while still being not too flashy. My most recent one looks like a small square box (small within a MicroATX format). I used the C3Tech MT-G710BK case. I called it my own "XBox". Hahahaha... Sadly, the iTX format is still way too expensive (the motherboard). I'm not willing to pay so much more for having a more compact rig, so, I have to make it do with the M-ATX format.

[@gr4j0m3r]

I am eyeing this one, thanks.

[@andytiplady]

Love that case, may have to try and find one in the UK been looking for a case like this for a while.

[@Mr_Matt_Lee]

You literally can’t buy one in the U.K. sadly, it’ll have to come via Aliexpress into the country 😪

[@DctrGizmo]

This build is so clean and compact! I've actually been looking at downsizing when I upgrade my PC to AM5 but it's hard to find a case that will fit a 4080FE and have bottom intake fans without issues.

[@zingwilder9989]

That's right. Bottom intakes are not great when they're required to pull air from a space under the case only as deep as the rubber feet.

[@ninjakajooislive]

Yesterday, I built an itx system with the same air cooler but with the argb one and deepcool ch160 mesh (non-tempered). I fitted 6 fans including 2 fans with arctic air cooler. Set the colour to orange-yellow. Looks dope tbh.

[@thadvanderlaan7206]

The Montech Heritage series is an interesting series with brown, leathery colors. I think that the heritage cases would pair amazingly with Noctua's colors.

[@liekarts2936]

11:11 wtf moment😂😂

[@tonysmith5077]

Nice case, clean build! i like

[@zingwilder9989]

As ever, Mr. Lee, it was an absolutely beautiful build. Moreover, it is a machine that will provide terrific performance. Also, Jonsbo is certainly an established company at this point. If I may be so bold, I probably would have used a 240mm AIO for that CPU. I have a 13600K and it can get warm.

[@Mr_Matt_Lee]

During our testing the Arctic Freezer 36 held up really really well and no complaints at all, so no need to liquid cool this time 😊 the full write up is in the pinned comment with temps. As for Jonsbo, I know they are well established of course, but here in the UK they tend to be forgotten about and seldom seen 👀

[@zingwilder9989]

@@Mr_Matt_Lee Many thanks, sir, for the response.

[@renanheidemann]

​@@Mr_Matt_Lee at least you find Jonsbo product, in my country they don''t show to say hi hahaha 🤣

[@PiotrBarcz]

Happy to see Team Blue being utilized still!

[@Mr_Matt_Lee]

The i5 14600K is still one of the best CPU’s for most gamers IMO!

[@PiotrBarcz]

@@Mr_Matt_Lee Yeah man, with all the intel hate I'm glad it's still holding it's own! :D

[@4762mc2]

I had also built 2 pc with Jonsbo D32 STD and Z20. They are really great compact MATX cases

[@Mr_Matt_Lee]

Awesome! I couldn’t agree more. Very high quality respective of their prices 👌

[@Dudebrush4pwood]

There've been so many cool mATX cases out recently I'm upsizing from ITX. never going back to the big honkin tower gathering dust on the floor!

[@aaronv3859]

the typos at 8:12 is killing me 😂

[@akountabel]

Almost the size of an ITX build. I would have preferred this for cost saving alone. ITX tax hurts lol

[@cakeisalie]

Micro ATX for life!

[@fairlymoon448]

I think i like this more than the fractal terra. More ports and possible glass but similar formfactor.. it looks slightly easier to build too... These vids are my asmr