INSTALLING PRO TAPER BARS ONTO MY MT-07!

[@dannyb9083]

isopropyl alcohol works good for getting grips on and only takes a few mins to dry off. I don't normally use glue. I find theyre super sturdy even without and it means I can get them off with compressed air.

[@JustBrapz]

Ahh nice, ill take a look! 😀

[@Try2KeepUpK]

I drank a beer everytime you said nobbilybit and I blacked out woke up in jail they are saying I attempted to steal the declaration of independence

[@JustBrapz]

Hahahaha 😂😂

[@Karlrx31]

I just heard it while reading it in your comment 😭

[@gringostyl]

i learned more in this video than i did in school 😎😎

[@FalconR73]

😂😂

[@JustBrapz]

I bet i'm the best teach you're ever had lol

[@buckywylde6493]

I'm really not looking forward to swapping my bars. But I had to lay my 07 down. So now I'm forced into it.

[@JustBrapz]

It took me a while to get used to them but now I love them!

[@buckywylde6493]

Finally got all my replacement parts in for my bars. About to give it a go. Hopefully it goes smooth

[@patoslagos6497]

@@buckywylde6493update good sir?

[@chrispewkreme]

I had Pro Tapers on both my old MTs. They just felt really really low. Fun for stunting. But not comfy commuting. I had a 2” risers with some Carmichael bend. But it just sat too low.

[@JustBrapz]

Yeah I get you, I must admit it took me a while to get used to them. But now I have them I wouldn't go back!

[@BlackSlimShady]

That rough edge thing you're talking about is called being knurled.

[@alessmuk6164]

It is batter protaper mini for Honda, fits prfect

[@AdamKlawonn]

Did the ProTaper bars move the riding position higher, more forward (more “lean”), or both? Curious what the effect is. Thanks for posting!

[@JustBrapz]

Makes it feel more like a dirtbike, more upright position and more control.

[@charlottec491]

Looks really good! Bet it was smelling rather funky in there with the glue and hairspray combo 🤣😆

[@JustBrapz]

Felt a little weird walking out of that room haha 😂

[@TomDawson18]

this was very informative and i like that ya did what a few mechanics do in cluding my self and use what tools ya have at ya disposel it is like if i need a hammer and that is my tool box i will use a ratchet or somthing else like a screwdiver not the correct tool but gets the job done grate video

[@JustBrapz]

Whatever it takes to get the job done! Thanks for watching and commenting Tom! 😀

[@alex.crf450r]

pro-taper all the way

[@JustBrapz]

Alllll the way! 😀

[@aldindubo]

Are these bars 28mm or 32mm thick in the middle?

[@christophelamotte1253]

Was your stock throttle grip glued already? how was it removed?

[@JustBrapz]

I honestly can't remember, sorry pal

[@stevenbolton5967]

What are the dimensions of the new bars what rise is on them towards your standard looking to get new bars but wanna keep the high

[@JustBrapz]

No longer have the bike so I have no idea, I hope someone can help you. 🙏

[@Shay_K05]

Looking good I was sceptical but it looks rly nice 👍

[@JustBrapz]

Thanks bro! 😀

[@이재현-q2m5n]

22mm? or28?

[@jonnyslater9942]

No need to drill your bars. The plastic nobbly bits, as you call them, can be easily filed down. And no they never move once tightened, done it on multiple bikes.

[@JustBrapz]

Thanks for the info!

[@viggokindblom2194]

Great DIY Video man! I would really like to know where you got the Brake/clutch levers from? Hopefully this reaches out to you :D

[@JustBrapz]

Thank you, video was a long time ago but i think I actually got them off ebay!

[@viggokindblom2194]

@@JustBrapz I found them Thank you :)

[@disintegratev6951]

can someone hook me up with a link to the windshield that he is using?

[@JustBrapz]

Amazon Buy pal, no idea where the link is now!

[@BackyardGoon]

I don’t know what one to choose on the site can you send the link to this one

[@JustBrapz]

I don't have a link anymore but just search for 'Pro Taper CR Highs'!

[@victordanielgalindo]

Bro how difficult was it getting off the handle bar from the center 4 hex bolts? I swear I feel like I’m about to snap off the thread getting them off?

[@JustBrapz]

Are you rotating the right way lol, I don't remember them being that difficult tbh

[@victordanielgalindo]

@@JustBrapz yeah lefty loosy, I believe it because of the silly Allen key Swiss army style tool I’m using

[@crazyshaq1995]

@@victordanielgalindo bit late, but easier if you use a proper hex tool. Like a ratchet, more leverage

[@tonykivanc]

Thinking of getting a protaper carmichael bend for my mt-07, which ones are yours?? and thanks for the video its really helpful

[@JustBrapz]

I can't believe I forgot to include which bars they are! I've put a link in the description! 😀

[@tonykivanc]

I am new to the motorcycle hobby but is this the carmichael bend or not? Cause that one also says its the protaper SE. thanks for the link!

[@JustBrapz]

@@tonykivanc mine are the CR Highs 😁

[@tonykivanc]

@@JustBrapz thnx bro, it looks dope af

[@nathanhammacott3]

Do you have a link for these bars??

[@JustBrapz]

Here you go, mine are CR highs - www.dirtbikexpress.co.uk/product/pro_taper_se_seven_eighths_handlebar_-_black

[@nathanhammacott3]

@@JustBrapz king. Thank you

[@oooooooliver]

what exact protaper bar is this? Henry/Reed?

[@JustBrapz]

They're CR Highs

[@anonymous_gamer_1992]

"start drilling that hole" 8:38 and " as long as its deep enough to fit the actual knobbly bit in the hole" 9:05 had me creased

[@anonymous_gamer_1992]

and "stickin hard on the inside"10:11

[@JustBrapz]

😂😂😂

[@richiep102]

Are these the high or low i went on the link you put on and theres a few options Cheers

[@JustBrapz]

CR highs 🤙🏻

[@JoeWalling-mt07]

What bars are these bro ! I need them on my mt07

[@JustBrapz]

Pro Taper CR Highs!

[@jakeoutrider7644]

Heads up, next time u gotta slide stuff on and off, just lube the bar with dish soap. it dries eventually

[@JustBrapz]

Thanks for the tip!

[@D1sc1p1e]

Is your year an ABS model? Mine's an ABS 2018 and my cables were too short for the cr highs 😢

[@JustBrapz]

Yeah it is bro, I don't think I had a problem with it to be honest, what did you end up doing to get around it?

[@richiep102]

Did you get round it ?

[@D1sc1p1e]

@@richiep102 hi yes, sorry for the late reply guys! I ended up going in and rerouting the cables which worked. Was able to install klx 110s plus 1" pullback risers.

[@phantomcraneflymusic]

Bro that bike is fucking beautiful

[@JustBrapz]

Thank you! 😀

[@Robocoppat]

Ok here comes the $64,000 question: How much of a difference did they make on the naked bike?

[@JustBrapz]

I think TarzanMotoVlogs done a review on them but they make such a difference. It took a little while to get used to but I wouldn't go back now! 😀

[@tomstc]

Nice video, does the brace not serve the purpose?

[@JustBrapz]

Not really no, would look cool with it on but the screen is in the way lol

[@antonioradobuljac8249]

Its cr high or cr low?

[@JustBrapz]

CR Highs my guy! 😀

[@extern9899]

make a pov video with these

[@JustBrapz]

100% ill get it done! 😀

[@keshsthanakiya5789]

😍

[@JustBrapz]

😀

[@GrassoGrossoOgreLardoso]

Hi I am Frank

[@JustBrapz]

Hi Frank

[@alessmuk6164]

It is just for model after 2017 this doesn't make sense for model 2014-2017, it doesn't go together, if you have Abs, the cables are too short, there are no variants, I bought one, I can just throw it away!!!!!

[@JustBrapz]

I've managed to fit these bars onto both gen 1 and gen 2 Mt07's but I have heard people having the same issue!

[@clintgrimmett1238]

Knobbily bit😂

[@JustBrapz]

😂😂😂

[@jakespeed9419]

Cut the "knobbly bit" off

[@jakespeed9419]

"Abrasive stuff" knurling bro, knurling....

[@therealbabydriver6674]

L Grips no diddy

[@Shay_K05]

Bruv how old r u through the mask u look in your 20s but your voice says older and u dress in Nike and adidas I just can’t figure it out😂

[@JustBrapz]

Mentally i'm about 50 but physically i'm 24 haha 😉