Vauxhall/Opel Corsa E, Airbag Fault

[@davesterl]

All proceeds from the shop goes to Poppy. Find the items that are used on the Dave Sterl channel in the Amazon shop. www.amazon.co.uk/shop/davesterl

[@aspireinspire2750]

Saved me taking off the front bumper, i knew there had to be another way. Thank you pal

[@tinysmallfryskitchen8610]

I set myself a bit of a task as I managed to shear the Torx head off when I was trying to remove the old sensor. I couldn’t get at the bolt properly to cut a groove for a flat head screw driver until I cracked the sensor off with some pliers. Then I could get at the blot to cut a groove for a flat screw driver, and managed to unscrew it. Putting the new one in, to a couple of minutes and it’s all ready for the mot retest tomorrow. My father in law is well happy. Thanks for a great video I wouldn’t have known where to start without it.

[@maxkeble3517]

Brilliant! So helpful, thanks Dave. You’ve just saved me a lot of time and frustration.

[@garrylogan255]

Great video thanks, will be changing this sensor at the weekend. Arnold Clark wanted £130 plus vat to do it

[@kennedysgarage3281]

I have changed one or those crash sensors, but to be honest I would have pulled off the bumper too. So handy to get a refresher course. Hopefully I will remember it for the next one 😉👍👍👍

[@davesterl]

Pete, i think it's the older corsas you have to pull the bumper off which is probably why i did that and you've done too perhaps

[@kennedysgarage3281]

@@davesterl possibly Dave, but thanks for sharing the shortcut 👍

[@williamwicklow5192]

Ur right Dave every day is a school day small job well done 👏👍

[@wackey3455]

Nice one dave nice and handy tips in there

[@epad1990]

Good to see you Back at it Dave. Thought you went MIA for while.

[@Dan4x2282]

Oh Johnny boy you're a beautiful man from de ya old green emerald island, Bless ya you saved me niece a load of money god bless ya Johnny !

[@davesterl]

Who's Johnny?

[@peterurquhart7191]

A great job Dave 👏

[@peterarries7879]

You have to replace the short wiring harness as well dave, there's a tsb for them we do loads of them ,nice to see you back

[@davesterl]

The wiring was fine on this one and didn't need replaced.

[@TheGibby3340]

Yer Anderson impression is pretty good 🤣 Think I saw Sandy & Roddy piss’n around with one of these a wee while ago. 🍻

[@davesterl]

Did this job about 6 months ago lol

[@jamesbruno5896]

Nice job Dave!

[@mikeberry304]

Nice one Dave , vauxhall use tge slotted hole idea on the Zafira door mirrors , I remember when I did one , thinking how do I get this bolt back in ,then hey presto , saw the same as you did then , normally tge wiring rots for fun ,but that looked OK on this one , not good about the Italian GP last week 👍

[@davesterl]

Yeah Mike, was happy enough with the wiring on this one, cheers

[@NeilFoster-j7d]

a great tutorial many thanks

[@paulandrews1548]

Good stuff Dave.😀

[@davesterl]

Cheers Paul

[@colinreid7305]

There is an easy way and a less easy way, sometimes we just find the easy way after applying the less easy way. Great to see you back with another informative and well presented video and your easy going manner.

[@davesterl]

Yeah, on another day the bumper removal would have been necessary. This shows all possibilities.

[@donaldisrael7147]

The last Opel I worked on didn't have air bags. Opel GT (USA version)

[@petecurran3995]

Top show, Dave! I have a 2012 Peugeot 208 (1.4 hdi 3dr) showing its airbag emoji! Can you recommend a basic(ish) scanner that'll deal with it? Was looking at autel al619... Any comments appreciated.

[@AlJiji-f7u]

Hello for your video for the Fiat 500 1.3, did you have difficulty removing the 4 screws from the engine mount? because it is narrow between the chain case and the bodywork. Thank you !

[@bryndavies4429]

Had that replaced in my 65 plate corsa. Still getting the service airbag light when anyone sits in the passenger seat. Frustrating!

[@yusufahmed2883]

What’s the part number for the sensor Dave ?? Much appreciated

[@Ianmoore344]

What is the socket called what your using?

[@ekjambo]

Done thousands of these and that bolt has never been seized long way for a short cut but understand for video content

[@craigmckillop5182]

What bit was that you used for the screw?

[@akeelkhan8908]

What’s the part called Dave

[@drewsmith6066]

Good info chap , unlike some cheers 👍

[@bluemini17]

Good 👍👍👍

[@jamesdoherty9660]

No need to take front end off. I done this in under 3 mins with a rachet

[@davesterl]

As stated in the video

[@ciach57]

BOO91 - HELP . CORSA E 2016 1.4