Hydraulic Car Jack + Bearing Puller = Homemade Hydraulic Puller (The best DIY Creative Smart Idea)

[@snoozin99]

You guys that do this kind of work, I swear you are geniuses! Give you a piece of metal and a couple tools and you can build anything. Love your video, extremely cool to watch. :)

[@hugovictorfloresvaldivia1918]

Kp

[@MrDKDIY]

Thanks for your Nice comment bro !

[@PaulJones-bo8gt]

I said the same thing about this guy a brilliant mind for inventing new things Idk how he comes up with so many different things.

[@07uygur]

It is perfect idea but no one has watch the video because it takes 24 min. Normally it takes not more than 10 min.

[@suphiokan3603]

9

[@bebamiso4031]

Uvek krasne ideje i iznenadjenja koje pomognu izabrati i odgovarajuci alat .A i uraditi neki dobar posao.Komplimenti Deki umiverzalan si i ujedno jedinstven.👍👍👍👍👍👍👍👍👍👍👍

[@alimolina8769]

Buenos días hermano gracias por compartir excelente herramienta desde Venezuela Edo Carabobo Ali Molina muchas bendiciones 🙏

[@gregmccarter2176]

Iv got one of these started...then I had to stop..now iv learned your trick..I will finish it..

[@bogusawszczepanik4703]

This is the best free software Ive seen. Respect.

[@АлександрТарасов-я8т]

Спасибо за видео,не плохо придумали, удачи и здоровья вам.

[@gerardlambert8141]

Bonjour je trouve cette idée merveilleuse et ça va aider beaucoup de mécanicien qui recherche cette outils génial 👍 J'ai remarqué l'utilisation d'une colle avec un spray en bombe cela m'aiderait beaucoup pour réaliser des collages rapide auriez-vous la référence de cette ensemble de colle express je vous remercie et à très bientôt pour d'autres vidéos très ludique merci beaucoup 👍

[@jevgenijsobolev4661]

Браво, умная голова и золотые руки. Очень интересно было смотреть. Bravo, smart head and golden hands. It was very interesting to watch.

[@MrDKDIY]

Thanks a lot my bro 👍👏😉

[@maksimilnitcky478]

В идеале,гайку переделать,сварка как то не очень. А на лапки,резинку одеть,чтоб не убегали.

[@troye.1309]

Why must everyone add music to their videos? Most of us click on these expecting to hear just the natural sounds of a craftsman doing a job. But instead we're met with ANOTHER music video.... which, imo, ruins the experience.

[@jonperley7304]

Yes your right I MUTE THEM!!!

[@ooowilbur]

Aewww,shut up

[@richardvalter8837]

Ll

[@richardvalter8837]

Wlwlwl

[@smokineaglesrodshop]

good comment, I add music in some of my videos but at a much lower level over large spans of time between direct interaction with the camera. so you would rather just hear the sounds of the project? what if the video is sped up? do you prefer no background music then either?

[@bobbylee2671]

Wow u must be magical because last time I checked bottle Jack's don't work sideways.

[@donnie1581]

This is genius and I'll definitely be making one. Already have the large puller and bottle jack!

[@cosimomonticelli4479]

Complimenti davvero una utile e bella invenzione.....continui a sorprenderci...ben fatto

[@bebamiso4031]

Si e vero continua segvirlo a fantasiche ideie e molto bravo.Una persona che tutto fa con molto cuore e passione saluti.

[@МуратМамадалиев-д5я]

Надо же было додуматься молодец нужную вещь придумал!!!

[@JeroenVissers]

Thats a pretty smart idea

[@АлександрКозлов-с8я]

Хорошо придумал с трубкой. Советский союз.

[@CreativeToolWorld]

Nice idea

[@Iynkaraa]

Thank you for the ingenious idea, I am sure having just the hydraulic jack getting teared a part was useful for many here

[@MrDKDIY]

You Welcome my frend 😉👍

[@howder1951]

Yes I like the mod with the hose, but I don't understand how it still works in the upright configuration.

[@willsvenson9442]

He weld's everything with an arc welder, that's impressive.

[@spaight711]

That’s great. Now I’m thinking I might do the same, but change the design to a male thread at the top of the cylinder so that I can thread on whatever custom attachments for different jobs as they come up and make a threaded adapter for the bearing/gear puller. Thanks for sharing!

[@МихаилБобылев-г8ж]

Молодец век живи век учись спосибо.

[@ilorskie6900]

I think the original puller that dismantle to attach to the jack is much easiest way to use to pull out the bearing from the shafting of the rotor.

[@xachikkirakosyan5873]

⁷

[@kimchee94112]

Agree but he would not have gotten 3.6 million views.

[@jamesgalligan8805]

Not worth the effort as if you had a motor on the bench like that it would be easy enough to replace and putting a jack out of use.

[@edinsonsuarez7705]

Ingenioso invento, no imaginaba que algo así se podía hacer felicitaciones Hasta siempre .

[@mihalycsapo2926]

Nagyszeru

[@pikirkandansalamtobat1743]

MANTAB BOS. FROM INDONESIA 👍👍👍💫

[@btchhopperou812]

Nice homemade version of what Harbor Freight sells for around 60-70 bucks(w/o coupon), Just a but bulkier than the store bought model! Great ingenuity here- neccesity is the mother of invention, and if you need to get something done, the mothers teet must be suckled from time to time!

[@АнатолийТкач-б5щ]

¹о..

[@clintk5367]

That's great! Now my new project!!

[@javierboscan6433]

Excelente idea un pequeño estractor muy funcional lo felicito por su creatividad y darla a conocer gracias

[@timffoster]

I'm glad YT has a volume knob ;) But other than that, great vid.

[@MrDKDIY]

👏👍

[@gautambiswas8067]

Fantastic bro keep going

[@MrDKDIY]

Thank you, I will

[@thomasedwards3372]

WOW that was the coolest thing i've seen in a long time. you just invented a cool thing and just made millions congratulations. good job.

[@MrDKDIY]

Thanks a lot for your comment bro ...

[@silvanapapais3363]

Come farei. Per. Sostituzione le guarnizione di in compressore fasc di 25

[@truthserum9157]

@@MrDKDIY- LOL they sale them at harbor freight.

[@jonnygarland4741]

You REALLY did a good job perfect bearing puller there are other ways but you made it really easy

[@MrDKDIY]

👍😊 Thanks

[@franciscoduran2752]

Excelente, soy Docente con 36 Años de servicio , Activo . Venezuela, Franc. Duran

[@sunghanikola5221]

V.nice 👍💯👌

[@hungpham254]

Excellent...

[@tabyromescobar2248]

Fico saca rolamento robotizado boa da criatividade e só que é difícil agradar a todos os ENVELHOZOS parabéns😎👍🇧🇷

[@skipskip3078]

Nice job there thank you education pays off

[@ЕвгенийКазанцев-о7т]

Классно. Нет слов. Вся мудрость в простоте.

[@iansmeath8674]

Very clever, very clever!

[@tioab3l]

Thank you for the idea! I work in a wastewater plant and motors go all the time and getting the impeller off is murder! Have been looking for a much easier way and thanks to you I found it

[@Animo92]

They sell actual purpose made ones

[@donnie1581]

Harbor freight has cheap pullers and bottle jacks too!

[@aneanastasija7215]

izummmm 🎉🎉🎉

[@benjaminshepherd5425]

Great job! Lil bro.

[@ralphmccawley1554]

Ingenious, well done. A good watch. Thanks

[@MrDKDIY]

Thanks

[@MrDKDIY]

Thanks for Watching my Homemade Video Projects >> Follow me on Instagram / mr.dkdiy_official Subscribe kzbin.info

[@josueltenorio7765]

Parabéns pelo invento.

[@candiru68]

Muito bom, excelente criação. Parabéns

[@MrDKDIY]

Thanks

[@chhengchhay9740]

I don’t like the back ground music too loud. What he did is great 👍

[@gsh319]

very cool, got a few spare jacks lined up for the job.

[@MarcosLopez-hb8gk]

Excelente muy buenos los vídeos

[@bobbofly]

Finger-tightening the retaining bolts on the puller legs for a frictional position hold will make setting them onto the bearing a heck of a lot less fiddly. also, a horseshoe shaped washer with a center opening just small enough to catch the inner race of the bearing will aid in removing it in reuseable condition, if you're working in volume with a given shaft diameter & such a thing would be of use. Or - simply alter the flanges to fit on it.

[@crisostomocenidoza9660]

Ok. Ang galing

[@ratujoperalawa8626]

Network q1

[@glennbarthelemy2443]

Awesome !!!!!!

[@MrDKDIY]

Thanks

[@stevedubya291]

This is extremely useful for all of the people who've made “infinite power” generators, such as the Liberty Engine, and various others. The bearings on their devices have been stated to fail every 6 months.

[@veelink6345]

Mine been going 7 years strong now it's my flux compacitors I am more worried about

[@ZeitderEntschleierung]

Das Pumpen in der Luft ist ziemlich wackelig, spätestens wenn man schwere Lager abziehen muss. Vielleicht mit 2 Wagenhebern einen bauen? Pumpstation am Boden mit breiter Auflageplatte und mit Schläuchen zum Kolben-Armabzieher verbinden. Ich freue mich schon aufs Video😊😅

[@Shinu_1200]

शानदार जुगाड़ कल ही बनायेगे

[@dan-o9746]

That is actually a practical tool to have on the bench.

[@jamesweber4848]

Good man.

[@MrDKDIY]

Thanks

[@chrisgowlingt8669]

Excellent great idea

[@MrDKDIY]

Glad you think so!

[@wongwong95]

GOOD!

[@rapidfire-0680]

I love the idea, but it's an awful lot of stuff to have to fumble with on top of the weight of the hydraulic cylinder it is kinda ungainly, also the center of the puller usually has a centering cone shape to center in the end of the shaft that the pulley or bearing is pressed onto to help keep it centered while working the puller, but I definitely like the concept 👍

[@Demon227]

Super!

[@MrDKDIY]

Thank you! Cheers!

[@bonelesswhiskey2865]

Thats actually a great use out of an old jack. Props to you.

[@SpazmolGUN]

Ты молодец 👍 Из России привет!

[@MrDKDIY]

Не 👍

[@kalboako2079]

Very nice Amazing tools

[@MrDKDIY]

👍👏 Thanks

[@fraybencosme72]

Exelente..

[@stephenvarney3183]

That is one great puller.

[@MrDKDIY]

👍👍

[@vuhuynhvien]

Very good my 👍👍👍👍👍👍

[@MrDKDIY]

👍👍👍😉

[@thesnake316]

Хорошая идея. Лайк!

[@rogacianotorresanzures638]

Excelente gracias x compartir tus ideas geniales 👍

[@bensfixitpage341]

Cool video. Put the guard back on your chop saw before it sends a chunk into your face.

[@MrDKDIY]

Ok thanks!

[@Outindacold]

Great for light duty pulling.

[@AlanCurtis-t6v]

Very clever.

[@MrDKDIY]

🤙👍😉

[@josuejuvenallondonoloaiza7655]

buen trabajo amigo felicitaciones Saludos desde mi Cali Colombia

[@duggydugg3937]

brilliant

[@MrDKDIY]

Thanks

[@aaronbenns9051]

Awsome dude great idea

[@sergiodrapes3644]

Muito criativo , ótima ferramenta para oficina. Brasil.

[@Seteclata]

Só não entendi como o macaco ainda pode bombear óleo na posição original se foi invertido...🤨

[@yawakantise5731]

You are in deed hard working, keep on .

[@yawakantise5731]

I won't to know more about you.

[@MrDKDIY]

👍😉

[@MrDKDIY]

Thanks for your support

[@yoshy4072]

Just gave me an idea for a motorcycle shock spring compressor, Cheers!

[@MrDKDIY]

👍👍 Haha Nice 😂

[@bennockley]

Nice build, would be good for for any workshop!!!, Thank You for Sharing Your Work

[@dougjstl1]

Or you could just use a regular puller and a hammer this is a good idea though probably for bigger gears and stuff I wonder if there's already one out there somewhere

[@CillMhantainSean]

Small to big hydraulic pullers have been around for over 50 years now, and all far stronger than that one as their purpose built…..we made up a rectangular frame out of 50X50X4 mm angle drill 2 holes in to match wheel studs, then use a standard small bottle jack in its side to pull wagon brake drums off….cars and vans too…

[@royengle]

Very cool

[@MrDKDIY]

Thanks a lot Roy Engle

[@vinniscarboni4095]

Nice...good job.will make one.👍

[@tomthumb3085]

Top job.

[@MrDKDIY]

👍👍😉

[@ujangridwan4203]

Mantap,,,,,

[@inthefreytoo]

🤣@13:50 The oil? bottle - sneaking up for the kill! Great Video! It's such a pleasure to see a "DIY-er" put stuff together using BASIC SHOP TOOLS. Just a drill press, grinder, welder, etc. Good camera/editing skills too! Thanks for the inspiration!

[@МуратТуралиев-ш1ж]

Да идея хорошая, но есть такие трудно доступные места, а так красавчик

[@leekronforst4589]

That is a great slag hammer you've got there.

[@rendynuryasin7282]

Good...

[@manuelguillermoperezramire1047]

Buena noche te deseo en un lugacito del estado d Chiapas t estamos admirando los movimientos d tus manos un abrazo. Atte. Memo

[@reaganvillanueva4914]

The purpose of using hydraulic extractor is that we expect a greater force than that of screw.links welded on the jack?you think that is strong enough?

[@skakster3231]

Nice and good job😍😍😍

[@MrDKDIY]

Thanks

[@MrTibbs90]

I love your videos. They're really cool and interesting. I just hate all the ads. You can barely go a minute without an ad showing up.

[@MFarag-kj3qx]

Good job, why you fix a plastic tube inside the jack ?

[@midariss]

Отличная идея. Сделаем также.

[@ВиталийБлездов-о8в]

Татар

[@sillypuddystl2907]

Cool but impractical. Nice work though

[@SpeedySailor]

If someone wants to make this with out altering the jack [ non-invert], then make a plate to fit over the ram. Attach the pivot lugs to the plate with arms long enough to reach/fit/clamp to the base . This concept is Great, not everyone wants to alter their jack so much. Pullers have a rating and too much hydraulic pressure can break the puller. Nice to be able to replace parts easily. Would be nice to see a portable remote ram with lugs on sides of cylinder to mount removable pullers of various sizes. Nice Idea.

[@bobbg9041]

Honestly I think it still works as a jack. But the size of it dont look like its going to lift 2 tons and if it did not very far.

[@stevenm7566]

Awesome!!

[@aepabdurahman3701]

Good job

[@MrDKDIY]

Thanks a lot

[@mrantone916]

This could actually sell!! 🏆

[@chrisjarvis4449]

that is so cool

[@MrDKDIY]

Thanks

[@PunkkaRacingTeam]

Good idea, there's even actual pullers like that, at my workplace my co worker was using one, but it slipped even properly mounted and he's a really good mechanic, and it bounced out with a huge force and broke his arm, so definitely a good idea but don't save money in the wrong place imo

[@Skully317]

Exactly, safety wise, use the right tool for the job!

[@mohammadakram577]

Nice

[@handle1004]

Good👍👍👍

[@MrDKDIY]

👍 Thanks

[@staninjapan07]

Top video. Whenever I see this kind of video, I feel bad that I do not even have a basic bench or a space in which to use it. Apartment / flat life is bad from that point of view. Liked. Sub'd.