The best video for tuning Carb is right here I didn’t have to adjust my carb since I watch this video the step are easy and simple and down right straight to the point instructions.. the best video about carbs that’s out. Dorby is the Man
@MrDorby Жыл бұрын
Thank you for your support! Glad this helps you!
@edwinmendija80877 ай бұрын
Best video I've seen yet for adjusting the carburetor. The jet kit is so important to properly (and easily) get the engine to run smoooooooth............thank you!
@MrDorby7 ай бұрын
Appreciate your comment and glad you found value! Please share.
@projecthondarod Жыл бұрын
Simple, tried and true. Results matter! Aaaaand even an appearance by one of the shop inspectors! 🐱
@MrDorby Жыл бұрын
Thank you for taking the time to watch the video and your support. QC shop inspectors always around!
@lhoiejaywenceslao187911 ай бұрын
I AM SETTING MY ITALJET FORMULA 125/ TO THIS CARB WILL UPDATE FOR THE RESULTS THANK DORBY!!!
@Kawaties1977 Жыл бұрын
Dorby The Man. Keep the Good Work Coming. sharing is Caring.
@ORIGINALCONCEPTGARAGE9 ай бұрын
I love oko carbs have always been reliable for me as ive ran them on both 150cc and 232cc 4valve Liquid Cooled Swapped Honda Ruckus
@2roly2 Жыл бұрын
wish I knew about this channel years ago !
@MrDorby Жыл бұрын
Welcome to the channel!
@GrowYourOwnFun Жыл бұрын
Awesome video thank you looking forward to the rest of the series
@MrDorby Жыл бұрын
Thank you for taking the time to watch the video and your support.
@hectorvasquez693 Жыл бұрын
How much you charge build Rockus
@MrDorby Жыл бұрын
Custom builds start at $15k complete. Design consultation required and built to order. 1 Year lead time currently.
@thefightingchance Жыл бұрын
What all was done to the ruckus shown going 75mph? Absolutely in awe.
@MrDorby Жыл бұрын
Upgraded engine.
@dougparsley910 Жыл бұрын
Interested in item for my 232 will I start off with the same jets 125/40 I’m at sea level in S.C
@MrDorby Жыл бұрын
Thank you for taking the time to watch the video and your support. The baseline jets will be able to to start the engine. However fine tuning for each engine is required. Tune for the pilot idle jet initially. Then for the main jet after.
@gullahgeechee2699 Жыл бұрын
i’m SC also with a 28mm PWK carb.What jets helped you run good? mines still boggy full throttle with 120 main & 38 pilot
@dougparsley910 Жыл бұрын
@@gullahgeechee2699 what size engine
@gullahgeechee2699 Жыл бұрын
@@dougparsley910 stock 150cc
@Kawaties1977 Жыл бұрын
@@gullahgeechee2699 try 118 /35 i bet it works better im in NC and thats what i use
@marcusriley4105 Жыл бұрын
Nice job, you should do more how to video's. Keep it 💯
@ironhead3206 ай бұрын
Do you have another motor work done to run 30mm
@GarageVegaUS Жыл бұрын
Amigo nice channel new sub, i just revived my scooter 150cc gy6 with a new engine Xpro150cc from amazon. Sounds good but what gas Oct is better. I'm using 89 i heard you need to use 91 but i dont want to ruin the scooter
@MrDorby Жыл бұрын
Generally carb engines do not require premium gas . It doesn't affect any gains or lost.
@cookncrack53344 ай бұрын
honestly is a 30mm the best for a crappy old 150cc? i looking to buy a oko and im getting different things from different places 26 28 30 im at sea level in wilmington nc
@universegodkeylime5992 Жыл бұрын
Hey are you in Florida?
@MrDorby Жыл бұрын
Yes we are in Florida.
@vincentnavea69997 ай бұрын
do I need a fuel pump if my gas tank is gravity fed?
@MartinPage-lt4vf2 ай бұрын
nope
@caronanderson99 Жыл бұрын
Does this apply to 125cc also
@mccdub3054 ай бұрын
How much does a set like that cost
@Angellonely1 Жыл бұрын
Can you add this to a stock 2024 ruckus ?
@MrDorby Жыл бұрын
The Carb system is for an upgraded engine. A upgraded engine can be installed in a 2024 Ruckus.
@JoyVargas-ik9uj8 ай бұрын
Can i put 28mm carb on a 150cc
@danielscott814711 ай бұрын
Will this carb set up work with an Ice Bear 150cc trike stock engine.
@MrDorby11 ай бұрын
Yes this will work for gy6 150-232cc. The frame does not matter.
@courtneyscullark3147 Жыл бұрын
We’re is this shop located???
@pulsartech2945 Жыл бұрын
Do you not have performance issues with the carb facing forward instead of rear like it’s “supposed” to be. Mine always has issues like that
@MrDorby Жыл бұрын
We do not have any performance issues whatsoever. Give our system and experience the performance and reliability yourself.
@pulsartech2945 Жыл бұрын
@@MrDorby OK this is going on a generic Chinese scooter that I have stripped the fairings off of. Does that make a difference?
@Intothyvoid666 Жыл бұрын
im trying to get into a ruckus is it even legal to drive on the freeway im from va so you guys know how va state police be like with speeding or you know
@Leveluplivin9 ай бұрын
20:39 thanks for this
@terrancehowell9067 Жыл бұрын
Where does the throttle go?
@brandini25572 ай бұрын
Throwing shade on the electrical fuel pumps
@straggler666 Жыл бұрын
Im running 38pilot 125 main might have to move up to a 130 main tho
@Hollywoodbusa110 ай бұрын
Mine wants to keep puking fuel out the overflow when idling.
@chuckpierce8857 Жыл бұрын
Does anyone have dimensions for a 150cc stretch mount. I am trying to fabricate my own custom mount but not sure on specs. Please help.
@ORIGINALCONCEPTGARAGE9 ай бұрын
Great video brother
@thebigdogangel622211 ай бұрын
Link and price I live in Florida heat
@MrDorby11 ай бұрын
www.dorbyworks.com
@mccdub30510 ай бұрын
How much n where to buy
@MRCALIEMS7 ай бұрын
About 3k total for engine swap it’s on their website
@mccdub3057 ай бұрын
@@MRCALIEMS 3k ? Damn
@davidlockwood8703 Жыл бұрын
Got a 50 cc mddg wanna swap t0 150. Anyone no where. I can get. The motor. Wireing harness. I run 12 x8. Rear rim also. Motor mount.
@TheOGBDs Жыл бұрын
Thanks for the FB post on this. Makes me think im way too lean at 35/110. I don't think i caught it...any needle changes or middle clip?
@MrDorby Жыл бұрын
Needle clip is generally in the middle. Once you become more experienced in tuning you can super fine tune it with different needles and needle position. However its really not necessary to get over complicated.
@sensory2119 Жыл бұрын
Dorby you R the Ying in my Yang....
@MrDorby Жыл бұрын
Thank you for taking the time to watch the video and your support.
@AB-kf5hy8 ай бұрын
My sym fiddle 3 150cc goes 122km/h on stock
@Kevin-j9c1l3 ай бұрын
Gearing is the way to go.
@johndefalque5061 Жыл бұрын
Ièm autistic-not like I can arfford an Smax, but some say donèt put in a big bore because then you will need a bigger air intake, your bike will overheat and not last as long. I do wish to be at least able to ride secondary hwys in Quebec.
@mccdub3057 ай бұрын
That shit riding
@seanmayo2065 ай бұрын
Do not buy from rolling Wrench
@robertwalker29333 ай бұрын
Why not
@luisoscar1840 Жыл бұрын
remove that stupid vacuum pump man
@pulsartech2945 Жыл бұрын
I think the guy that’s been doing this for 15+ years and is probably the biggest name in the ruckus tuning game knows more than you. Ive ram that pump on all my setups as well and it has been more reliable than anything else
@MrDorby Жыл бұрын
The system is simple, reliable, and effective. There are not any reliable simple Electric fuel pump setups for this. We've tried a few and they often require too many extra electric parts to support the fuel pump that are clutter in my opinion and another item to replace. Sometimes they require fuel regulators that are also extra parts that can fail. However to each their own. Thanks for checking out the video and commenting. We appreciate your feedback.
@pulsartech2945 Жыл бұрын
@@MrDorby exactly. It’s nice seeing a response from the man himself. Love your custom builds and wish I could afford one 🥲
@MrDorby Жыл бұрын
@@pulsartech2945 thank you for your support! We're here to help when your ready!
@pulsartech2945 Жыл бұрын
@@MrDorby if I can get my wrap business off the ground I’ll absolutely be picking one up but that’s gonna take time, especially since I’m not in Florida/Cali