BEST GY6 PERFORMANCE MOD! [Plug & Play carburetor]

[@scooterbum707]

I received and installed my 26mm carb from Rolling Wrench for my 2022 Icebear Maddog (Gen 4). What a game changer! I noticed right off the bat that I instantly had a lot more acceleration. It's too early to tell if I have a speed increase. It's been raining 🌧 but I'll definitely test it out and let y'all know. I also purchased the clocking flange however I couldn't use it. It made the carburetor too tall and I couldn't close the seat but so far I haven't had any issues. Thanks Rolling Wrench 🔧!

[@stevenmahelona7034]

Send me information.. want to purchase slide carburetor

[@ceaseanddesist8036]

@@stevenmahelona7034 what info do you need?

[@colombian350jp]

You happen to know if that 3rd hose under the float bowl is a breather hose? He didn't mention that part at all

[@colombian350jp]

​@@ceaseanddesist8036 bro you got any info on that 3rd hose on the bottom of float bowl?

[@ceaseanddesist8036]

@@colombian350jp it should be for emptying the carburator. What carb you got?

[@AngelRivera-pt4dv]

I've been watching this for a long time and this guy is completely knowledgeable about his products and services. Great videos too

[@dannyjolivette4728]

I started experimenting with this a year ago! I wish you would talk more about the kitted 50cc though because here the Dakota territory we don't need plates or helmets so it can be easy to run about but we don't have a great service shop (me aside) so improvement is needed!

[@forevercomputing]

I hope you still wear a helmet though.

[@ericrobinson8108]

If you have a gy6 dont matter if you have a 150 or 50 most of the the stuff is the same

[@cav3man360]

I'm in need for my 50cc gy6 as well

[@philipproctor9132]

@@cav3man360 it will work but its best used with a performance metal naraku intake gasket spacer. Only beacuse the plastic one either crack enyway or end up mealting away if your tuneing. Just because the plastic intake space may get to hot and make a bad intake leak

[@androidken]

@@philipproctor9132 Can you hook me up with a link to this metal intake gasket for a 50cc gy6? I can't find one only plastic. I've cracked like 4 of those spacers. I just use silicon or gasket maker but that's not for everyone

[@randyej2pr]

Ive been running a Keihin 30mm Cvk and its been one of the best carbs ive ever had on my gy bike. If you jet it correctly you can get really good consistent performance outta them on a built engine. Never had and issue of my bike going lean at 70-80mph with them. Roll out speed is natrually a little slower on a cvk but it all depends on your cvt setup combined with the jetting and carb size.

[@huntersopher3665]

is your engine stock and if not what mods did you do?

[@dendys04]

yeaa exactly i love mine CVK carb and its soo easy to tune

[@michaelpixley8644]

You are so good at what you do watch all your videos thanks again.

[@RollingWrench]

I ssuuuuper appreciate the support more then you know🙏🏻💯

[@AdventureDaksExplores]

More power to your power mate. Gy6 user from Philippines, Godbless ❤️🙏

[@Nopitunertv]

the problem with porting and polishing the fuel side of the carburetor is you're not breaking up the fuel as much. polishing the air side is great. but you would want the fuel side a little rough that way the fuel gets broken up more as it enters the combustion chamber so it burns more fully. kinda like pouring a little gasoline on the ground lighting it on fire it's gonna burn for a couple seconds and go out. now spray fuel from a bottle and light it as your spraying it. it's gonna burn for fraction of a second and be gone. same concept with carburetors.

[@joereise1260]

Their is so much vac it atomizes instantly I have huge doubts on that theory I guess will never know

[@memeuless8178]

This insight is very very wise thank you for sharing !

[@lomtiptak9519]

@@KaptainKruiser if you were to pour some water into an empty pan on your stovetop, you would see a few large drops dancing around as they slowly boiled away. If you instead sprayed the water from a bottle in a controlled mist, the small droplets would evaporate almost instantly.

[@levithrasher7417]

Polishing isn't beneficial period. Think of a golf ball. Polishing just sells because it is pretty.

[@billroberts9044]

WoW, You guys should go talk to some engine builders for $100,000 Formula 1 intakes. Or manybe a NASCAR or Sprint Car engine builder. Tell them about how their polished intakes are foolish and completely wrong. 😂🤣😂

[@brandini2557]

Your the only one that has aftermarket support for the maddog hope you keep making parts for them as well

[@RollingWrench]

Oh we will continue! As long as there is a demand

[@universityrepairFL]

Informative! Tight mod! Ive had a 150 sitting for a min and I have the stock style rn.

[@VirberelloScooterTips]

Great video! Keep up the great work and thanks for sharing your knowledge.

[@RollingWrench]

Thanks for the support

[@db3170]

Don’t use grease! Transmission fluid is best to lube all throttle friction points,grease will eventually foul and create a sticky throttle . Super thank you for content and efforts…

[@RollingWrench]

The grease we use is a light weight grease for bicycles. Works wonders! We have been doing this for years. Thanks for the support

[@POPETINRacing]

This carburetor mod is a must for doing power wheelies on a scooter

[@NAET77]

This is for 2t right?

[@villson3960]

@@NAET77 yep

[@stetsonpleimann5808]

I bought a scooter with one of your carbs on it but it's missing that top support for the throttle cable. So it's shredding itself on the hole in the cap. Can I buy one of these? I was looking at cables on your website but they didn't seem to have that little support

[@zfloz9895]

@@NAET77 the carb seems for 2t ,but they put it on a 4t.

[@brandonbrandon749]

How about a a 139qmb that has 100cc big bore kit

[@Mark_Cabe_7618]

Dude I love these carbs. This is my third build using rolling wrench carbs. I remember the first test ride I took after installing one and roasted my back tire at a red light 😂.I just got both 28mm ones I ordered yesterday and I'm trying to remember which jets I settled on. Any advice is appreciated. Elevation: 3400' above sea level Displacement: 171cc Carb bore: 28mm Exhaust: very low restriction Intake: uni filter I guess try it with the installed 110 main first? I may end up just getting the O² sensor lol

[@marcomrtz15]

I need this. But I don’t know nothing about jetting.

[@jp6940]

Video was very well done and informative! I do like my slide carb very much but would prefer to NOT polish the intake side for better atomization. But may not need the carb anyway! Waiting for that electric kit to hit the market!!!! ❤️❤️❤️

[@appix21]

Hello sir. I'm from Malaysia. What is the best size all jet setting for pwk 26mm for standard 150cc?

[@aski1529]

Tell me too

[@AbduTaleb]

WHAT IF CHOOSING CARB. AS 28MM OR 30MM FOR 150CC SCOOTER!! INSTEAD 26MM ! WILL PWK USE MORE FUEL AS WELL OR NOT??

[@eliterry3785]

Beautiful parts! Love these vids. I’ve learned a bunch! Probably best with a head that has bigger intake port too.

[@roywalls5595]

Thanks for the video! Matt

[@hempfieldproducts]

Glad of another bikes with motors mechanic,,, ebikes are cool

[@johngarner8764]

Great vid! Love how easy it is. This will be something I'll be picking up.

[@KyleCorfman-io1zr]

Replaced my stock petcock with just an on/off/reserve. No longer have the vacuum check valve piece of junk So no I should be able to plug the nipple on the intake with my new pwk card ? The gas tank sits above the carb and is flowing with gravity so I do not see the need to have the vacuum line leaving to anywhere

[@joshuamelo2685]

You jus saved my life bro I can’t wait for my carb I put a 28 mm racing pro (nibbi) n my maddog is 150cc stock once I get your carb is a Rap!!!!you explain it Simply bro Thanks 🤞🏼💯

[@scooterbum707]

Did you get it installed? I was told not to use a 28mm but use a 26mm instead.

[@mopedmessiah]

So will the 26mm carb with the bigger intake work good on a 150 with a stock head? It wont have problems with the port on the head potentially being smaller?

[@joeecarbonee6849]

You made that make sense. Im buying me a new one from yall now for sure👍👍

[@999benhonda]

I have a pz19 pit bike carb on a gy6 with a 70cc bbk. So much better than a cv carb. Doesn't get clogged as easy, some clogs can be sucked through by using the choke and when you need to clean it comes off and apart faster.

[@SrColon309]

I'm going to buy one of those carb right away. Thanks for the good information.

[@RollingWrench]

Thanks for the support 🙏🏻💯

[@casey360360]

I just installed a new flat slide today. (Take it from me, DO NOT buy the cheap carbs online. They're somehow worse than their reputation.) It was $30 and it's trash but for the 20 minutes that it worked, it freaking WORKED. Now it just pukes fuel out the overflow. Gonna order a new one next week.

[@jonlafave4959]

Hey guys love your videos big fan just got a tao tao 50cc *139qmb plan on going 100cc bbk what carb set up would you use thanks

[@justinmfhively8891]

You can run a way bigger carb. I recommend up to 32 on even a stock gy6. I'm running an a9 cam with 32mm carb (damn near stock) and she loves it., Also that leaves 2" that u can run a nice pipe for your air filter (long tube cold air intake) Ps: awesome glasses broski👍👌

[@RollingWrench]

One thing to keep in mind as I mentioned in the video. Elevation plays a huge roll in the size of carb you can use. For instance: people in Florida can run a 30mm carburetor on a 150cc. Us up here in Colorado can’t even run a 30mm on a 190cc. The reason for my recommendation is because it’s good to be universal. What if a Florida dude takes his bike to the small bore rally in Tennessee ? The bike won’t run. So yes, depending on your elevation you can run a bigger carb. Just keep that in mind

[@davesnothereman7987]

@@RollingWrench what are size would you recommend for some one living in Florida I was gonna eventually buy your 171cc drop in engine but idk what carb to put on it

[@RollingWrench]

@@davesnothereman7987 28mm is what I recommend. But you can run a 30. However with a 30 you won’t have as snappy of a throttle as with a 28

[@ceaseanddesist8036]

I found 24mm to give me great gains. I also tried a 26mm and found it a little rough in the transitions despite configuration. elevation makes a huge difference. Live at 6500ft

[@zeratv5283]

In our country here in the philippines most of gy6 users here replaces their slide stock carburetor to diaphram type because it consumes less fuel (more fuel efficient) than piston type carburators.

[@adrianscoggin7212]

Will these carbs he's displaying fit a 50cc 4-stroke with an 80cc bbk?

[@richardworden9747]

@@adrianscoggin7212 no you need a 21mm pwk carb

[@adrianscoggin7212]

@@richardworden9747 okay thanks. Appreciate it brother

[@bumblebob5979]

He's not honest with his selling arguments. The slide carbs are for racing and not for street riding. Just a brat making easy money. A correct tuned diaphragm carb makes the engine run better and won't kill much if any performance at all. A nervous engine is not a fun engine.

[@jasonjulian1]

@@bumblebob5979 right, nothing wrong with a cvk style carb. Off idle throttle response is slower, sure... But once air is flowing, that diaphragm is constantly up and down as needed. Flat slides are definitely a racing application carb.

[@davidtipton5849]

I have a trail master sorrento 150 they say it is a gy6 motor and I was wanting to know if you have a high performance carburetor for my scooter? I also want to know what a good exhaust is that sounds good and last is it good to take the governor off of the gy6? Thanks

[@richardbaker9139]

im building a gy6 50cc long case engine with an 80cc big bore kit fitted to a big frame 12" tire VIP style scooter. i have a good exhaust , variator and clutch. could use some help getting the right carb / intake set up. is your carb kit the right choice for my engine. please answer back as im ready to finish it and ride.

[@christiancordero4060]

Awesome video, rookie here why the reason I will be getting different jets for?

[@kevinsavinon1571]

Hey what’s up man, I love your videos. I recently got a gy6 buggy & I’m loving it. I wanted to get one of your carburetors, but they’re all unavailable on your website. Are you by any chance still selling them..? If so, how can I get one?

[@RollingWrench]

They are back :-)

[@RollingWrench]

I appreciate the support

[@DustySteel]

This is so cool!! I would really like to get a Pro version with the black body for a 2023 Honda XR150L after I get it.

[@Kevin-j9c1l]

Best performance gearing 😁

[@Districtss_]

i have a piaggio zip 4t with an 80cc kit on it i tested it with an 24mm cvk carb and the top speed was 85km/h but the throttle response is indeed slow. my question is what size pwk can i fit on it ? because i dont see any information for an piaggio zip 4t engine

[@panchobello7408]

Hello. great and detailed video. Can you please leave the link to buy the long gy6 engine with the 171cc kit and carburetor already installed, that is, ready and tested to mount on my scooter, just make the connections and start?

[@kotaskaj3951]

I have a coleman 49cc moped and upgraded to 80cc (1p139qmb) and I am struggling to tune correctly (even welded in a wideband af sensor) and still struggling!!! What should i get? Also the carb i have the throttle cable enters on the side this one comes in from the top, how to route that? And then what are the jets you use?

[@jasonhershock5357]

It looks like I would have to do some more modifications to my GTS-150 to use these. What would I need to do to use one of these on my Hammerhead GTS-150.

[@rafaels3552]

I want to know the same

[@KR0N1C]

@@rafaels3552 Me too, above he replied with a universal cable kit. might try it

[@DIYunpolished]

I need more info if this will for the gts 150cc hammerhead. Conflicting info, people saying I'll need a riser for the manifold so that it clears the cradle That holds the engine.

[@itzbulletboypr4734]

That is nice i have a oko 32mm in my gy6 Vento mine is 62mm,it have 63mm valves now

[@RollingWrench]

Wow! You must be in Florida??? That would never work up here

[@itzbulletboypr4734]

@@RollingWrench Ohh that type of 3mm carburetor is not sent to your country? no i'm from Puerto Rico

[@kennywheelus6857]

I'm not sure which carburetor is coming stick on my 2022 X 50cc bike,but as soon as I get it,I'll let you know,I'm interested in to getting a little more pep on my bike

[@my50bike]

Thanks for the video the carbs look cool! Do you do any Carbs for Honda Dax and Z50 Monkeys?

[@wiliamdrakeelitedangerous4699]

hi.im need uninstal vacum operated fuel pump for this carb?? what if im cant uninstal vacum operated fuel system??

[@dylanmicheal7327]

You should do more videos on Yamaha c3

[@RollingWrench]

Yes I should! I have c3 with the stock engine that has been modified to go 67mph 😛

[@cav3man360]

@@RollingWrench show that and how u got it to get to that sheesh they look sick

[@joesielrosario5467]

i love the simple fact love it

[@2xantnice]

I'm adding one of these to my 150cc go kart. My go kart has the vacuum petock, how to I add the vacuum petcock hoses to this or do you have a diagram on how the hoses with line up

[@amatureskater15]

Great Video! i've got a 139qmb and 157qmj and they are fun little engines

[@Deon0026yickadee]

Can you make one for a 50cc gy6 please

[@toddhill6704]

I know this video is kind of old. But I recently got a coolster 175cc. It's a 2024 version. The carburetor isn't so good in my opinion. Sometimes doesn't want to start up. I have to give it a little throttle to start up. Would this solve the problem?

[@JONNYROCKIT99]

What if I have a vacuum fuel line? Is there a way to hook that up onto this carburetor? How does that work?

[@chrispayne2269]

I have a 50cc scooter what carburetor size if you have one for that

[@ridered6271]

Hey I just ordered the 28 pro for a 177 cc go kart. It’s the vitacci Batman model. The website says the throttle cable won’t fit. I measured mine. It’s 121”. I’m concerned my current cable won’t fit the slide. Will it fit the new carb or where do I find a new cable. I searched the web but can’t find out. Thanks

[@dainiermatosbenitez5488]

Greetings to you. I watch your shows and they're great. It is seen that you perfectly dominate what you do and that you like it a lot. I would like to ask you for advice. I like motorcycles and I would like your opinion on choosing a 125 cc motorcycle over a 150 cc scooter. I understand that one can be more practical than another, I think it depends on the needs and perspectives of each person and what can be better for daily life. people and friends have told me that the GYN 6 doesn't last, I don't know much about it. I hope your advice and continue with your programs on KZbin, they are super. Cheers.

[@juanestrada8941]

witch size carburetor is best for my honda trx forman 500 i want to put a performance carburetor on it plz help 🙏🏼🙏🏼🙏🏼

[@DayanEngineeringWorks]

thank you very much for the video. Also i need a help. I have honda xl185 and previous owner put 125cc on it. So i think to go to a pwk carb. So if im going to buy , what size do i need to mesure ,? Hight and width is ok. Need to know the other things Can you help me with that?

[@elliotridenour7661]

I have tho same stock carb like that one but need a much better one and better performance to ?

[@mjt106]

Excellent 👌

[@thorbenhoogendijk7428]

So if i get this right i can take my runner st125 four stroke carb off and put a pwk on Jet it and it wil work without problems ? Doesnt it need the other parts the cvk has ?

[@matthewbrode9944]

Can u recommend a carb u sell for gy6 50cc rebuilt with a 80cc big bore kit and also a clutch and a exhaust system best to go with it too please and thank you

[@tasha2141]

Is this install done on a Maddog or Ruckus?

[@michaellarcom]

What is all needed for the 2022 IceBear trike 150cc as in carb kit and any extras to take out the guess work

[@wags9777]

Polished intake side hurts. You should know this. The rough surface helps to atomize the fuel

[@RollingWrench]

On the head yes, not in the carburetor

[@el_chili_oficial9556]

I have a 2017/RIYA I would like to know which one is the right one because I don't know the exact mm

[@kyden8748]

Hi there I have a lexmoto aura 125cc euro 5... witch one would you recommend for my bike thanks

[@juancamaney3562]

I need four GY6 carburetors kits for my 1986 Toyota van

[@cheemo1957]

hello,a little off but are yamaha nouvo's gy6 ? mines a Nouvo 135 and looks so close..thanx

[@kennywheelus6857]

Hello sir,will these fit a Honda grom clone or the pocket bikes from venom motorsports, most of there bikes are all carburetor

[@shannonnanalook6792]

😮Anyone get this for a Coleman BK200? What size do you get? And do i need a new throttle cable for this carb? Idk what cc it is.but i know its a Colman BK 200. Coleman wont give out what type of aftermarket parts or any reference, they want me to buy their cheap parts.

[@katherinedacquel7371]

Can you do a video for 125 cc? From Philippines🎉🎉🎉

[@williamhudgins1427]

I have a df50sst Dongfang 50cc moped/scooter would your carburetor's work for my bike and if so, what size would you recommend for my bike?

[@MAHillier100]

where would I find a throttle cable for my fox carbide buggy so I can get one of these carburetors it has the gy6 150cc motor ?

[@TheGriffmann01]

I was wondering if you guys have a shop where custom work can be done. I have a 150cc I'd like to enhance ASAP!

[@RollingWrench]

We have a commercial shop. But only sell parts. We don’t do customer work

[@_BlueCollarGamer]

So.. how does one go about using this on an engine that has an electric choke? I have a 2021 Ice Bear Malibu 150 with a GY6.. I am assuming its got an E Choke because I do not have to choke it to start it.. is it possible or do you guys sell a carb compatible with E Choke or do i need to some how delete the E Choke and go manual??? Im still wet behind the ears when it comes to this stuff.. Im teaching myself everything VIA youtube. Im looking to add a little extra umph to my scoot. She scoots but I think she can scoot a little better.

[@michaellarcom]

What size carburetor do you recommend for the 2003 Polaris predator 90 2 stroke ATV with no air box just a filter and after market full tuned pipe and muffler. My son try to change the Jets in the carburetors and snapped off the head of one of the Jets and then he misplaced the carburetor so now we got to find a carburetor and figure out the jetting we live in Toledo Ohio elevation 650 ft above sea level. He got a 24mm carb and intake kit with reeds and Cage

[@Michael69101]

Love this, will this work on X-PROS 229cc scooters, that I'm thinking of getting one this spring.

[@RollingWrench]

No, the kit is made for the qmj157 engines

[@Michael69101]

@@RollingWrench Okay thanks.

[@OTMTR3]

I have a 34mm carb I don’t know what sz filter to get for the back what should I get

[@mariajeanelle7894]

I have a manifold with two holes , but with my replacement from nibbi has one, how do I connect the holes if one is going to be missing

[@RollingWrench]

Get a splitter.

[@JessenForrester]

Would like to try a performance caburator I have a gy6 the performance is wack

[@Smodlee]

My highest point in my state altitude is 5,276 and lowest is sea level the mean alleviation is 600 feet the setting on the carburetor I got from u had a 105 main jet and a 38 pilot already installed by u guys on the site it’s says pilot is 38 and main is 135 well I did a lot of testing on the jets and the 135 was boggy so I continued to find the sweet spot and I went back to the 105 main jet and the 38 pilot jet it had a little bit of boggy but not much I adjusted the air screw and made it a little better but it still wasn’t there so I ended up hooking up the purge valve tank and the boggyness went right away so with that being said it was just getting a little bit too much air I’m not sure what that purge valve tank does exactly but I would like to know?

[@philiphapeshis1226]

So a stock 50cc with cod mod it will help with performance?

[@nonegone]

What if I wanna wake it up, a new carburetor. But I wanna bore it to 170cc later. Should I go 26mm or 28mm?? I'm gonna do ur bore kit. Mine is currently a 125. I'm planning to do ur drop in bore kit

[@crackerbaitnmarine6867]

They look real good

[@RollingWrench]

We like the good stuff :-)

[@Tuckem2STOGS]

Do you make the blue clear bowl one on 26mm i cant find one anywhereb only see 28 will work in when i install the zs190 28 will bw fine ove got a blue vador build going love you very informative vides

[@conradduenas]

Hi where I can order you hi performance carb for GY6 150cc,want to order the 26mm can I get the info to order online

[@Lowk3yhere]

Are these carbs compatible with the knock off Gy6 chinese scooters?

[@kenfernandezvidz9663]

how about a 125cc stock gy6 engine what size of carb you can recommend. i just want a responsive throttle, and a good acceleration with a bit power.

[@middlesiderrider]

Many 125cc scooters come with a 26mm carburetor stock. I have a 2008 Yamaha Vino 125 and the stock carb is a Mikuni BS26(26mm) CV carb. I bought the scooter missing it's carb so I first got it running with a CVK 24mm carb from a 150cc scooter, which is a very similar carb. It ran ok but when i put on the correct 26mm carburetor it made a big difference. Note that the replacement carb came with a 92.5 main jet which is too lean. The stock size on the Vino is 97.5, but they run even better with something a step or two richer, such as a 100-105.

[@benitocruz9090]

I would like to buy one for my 50CC moped can you give me information on which Carburetor is best for me.

[@juliodiaz4493]

Rolling l install that red cdi en it got on 🔥 fire no good

[@paulshadrock]

Sir i have honda activa 110 cc any 1 can carburetor can fixed sir .

[@federicosimangan5163]

Can you please give me some tips for my motorcycle , My motorcycle is RUSI GALA SC125, I change my block to 57.4 and my carburator is 26mm Keihin

[@juliodiaz4493]

Can I go with a 28mm for a 150cc am going with that one

[@Luicovarrubias]

Hello there what carburetor did you recommend for my 4 stroke gx50 Honda engine? Thanks

[@e_s.0848]

I've got a 170cc gy6. Will these work?

[@wholeeyschmoley580]

UNDERRATED CHANNEL

[@eljefe209music]

What exhaust is that? Sounds beastly

[@mikecuev820]

Hey rolling wrench, What could be causing some popping and bogging at 2/3 - 3/4 throttle on a 150cc GY6 scooter? Can you think of anything electrical that can be.causing this? I've already installed 3 new carburetors, 3 different csi boxes, different coil wires, and a couple other things and I can't seem to get rid of it. Can you help me please?