Foundations (Part 1) - Design of reinforced concrete footings.

Shallow and deep foundations. Types of footings. Pad or isolated footings. Combined footings. Strip footings. Tie beams. Mat or raft foundations. Reinforcement design. Direct shear check. Punching shear check. Details of reinforcement. Design steps. BS8110.
The links of other important videos are given below:
- Stress-strain curves for concrete and steel:
• Stress-Strain Curves o...
- Analysis of RC sections according to the BS8110 code: • Understand Reinforced ...
- Design of singly reinforced rectangular concrete sections: • Design of Singly Reinf...
- Analysis of singly reinforced concrete rectangular sections: • The Capacity of Singly...
- Design of one-way slabs - Part 1: • Design of Reinforced C...
- Design of two-way slabs - Part 1: • Design of Reinforced C...
- Design of Beams - Part 1: • Design of Reinforced C...
- Design of Columns - Part 1: • Design of Reinforced C...
- Foundations Part 1: • Foundations (Part 1) -...

[@MITERMAN1212]

Dear Sir I am a mechanical engineer in the USA and have done a lot of machine design work. I am now designing my retirement home in Florida and I ran across your video. This video is absolutely fantastic ! I really appreciate the practical reasoning you use to explain and make very clear how to calculate the forces. Your students are indeed lucky to have you ! Thank you so much and please continue to make such videos.

[@khalifamedyoucef8966]

I really hope your students realize how lucky they are to have you as their teacher. It was crystal clear and super helpful. Thanks a lot 🙏.

[@MrElgamal77]

Thank you for your support. Glad it was helpful!

[@gnidnoeled786]

Again, I have to say this. This explanation is insanely clear as distilled water. Your students are so fortunate for having you. I wish that there was KZbin channel in my University years. Bravo doctor. 👏👏👏👏👏

[@gullamgullam7646]

Hello Dr El-Gamel. Thank you for your tutorials. You are more than a teacher. Your elaboration is clear and hopeful every one can understand instead of creaming. Continue to provide other videos for the design of other structural members. May God give you a long life with Good Ends. Thank you.

[@tolossajote6984]

Bravo doctor! Your elaboration is clear AND every one can understand! Thanks a lot.

[@paulmwangi5061]

Thank you doctor for your kind act to help us,be blessed.

[@jeangc4283]

Great explanations throughout. Thank you!

[@QueenluluTV]

Thank you Doc. Your channel has been of great help.

[@azamgabir5197]

جزاك الله خير الجزاء على هذا الشرح الرائع و المفصل و أتمنى عليك يا دكتور أن تتحفنا بشرح مفصل لكيفية تصميم البلاطات الفلات و الأعمدة النحيفة و القواعد المشتركة.

[@yiendang9681]

Thank you so much Dr. El-Gamal for the interesting video, I really understand the Foundations. keep teaching us more

[@mohamednaggary2986]

شكرا جزيلا يا دكتور على الشرح والمجهود الرائع .. هل ممكن حضرتك تشاركنا بال PDF فايل بتاع المحاضرة علشان يكون سهل للرجوع له فى اى وقت... جزاك الله كل خير

[@yousifjames8148]

Thanks really I appreciate your effort to make everything clear and God bless you

[@natureluvr2752]

Great explanation Dr El Gamal . thank you .

[@emmanuelchinaza1706]

You are the best in Civil Engineering

[@SirKombabomba]

best video regarding footings Design.Many Thanx Dr Sharif

[@surangamhazra521]

Very nicely described and taught. Thank you. Regards

[@olaidekazeem1074]

Thank you so much for this video. Your have thought me what my lecturers refused to teach me in university. You have done a great job sir. May God continue to increase you in knowledge. Please I want more video from Raft and pile foundation. Thanks in a big time sir. May God bless you abundantly.

[@adelabuidris6292]

What school did u attend bro 😀😀

[@mohamedabdulbasith1482]

Very good explanation. Thank you very much.

[@izuwagbeakharume9569]

Thank you Dr. Sheriff

[@demar5223]

You're a legend man.

[@Theo_4a]

Thank you for sharing. Good job

[@jayeshharode7195]

Really helpful and very detailed , thank u sir

[@mohammedalotti8580]

thanks Dr it was a simple and useful video

[@cozy_homezsl]

Thnks doctor , great explanation keep it up

[@mantshahlokwa8937]

Thank you so much for this

[@user-be3rr8tj3g]

Thanks our Dr. El-Gamel for this lecture. Can you make a lectures for design a neighbour footing when the position of column at mid and other type at corner

[@civiltechnology26]

Very nice lecture thanks alot sir.

[@BashirAhmed-jo4zq]

Its really amazing, everything is well defined and explained. Expecting more like this video.

[@sjaswanth777]

very nice lecture sir :) thank you very much

[@shazebkhan172]

Thank You Doctor

[@smronly]

Thanks doctor very interesting and helpful video from mauritius, can you do some videos on Design of Retaining Walls to British Standards

[@engcivil8275]

amazing explanation

[@mhelmi73]

جزاكم اللّٰه خيرا كثيرا يا دكتور

[@sonofsun761]

thank you so much for great content doctor if you have time we will be glad to watch video which you design some footing and foundation in real time

[@Triplezgarage]

Thank you for the video good info. When you record audio set input on mix -6db this will leave you enough head room as not to clip.

[@rayerouxjeremie2873]

Hi sir. Many thanks for the instructive video however i have a question. Should we backfill the footing? As i am thinking to make a basement slab just above the footer?

[@afzaldomun1581]

Too good man👍👍

[@chathuradissanayake4486]

Could you please upload a lecture for Liquid retaining structure design to EC2 or BS8110/BS8007

[@mohamedsharifhassan7524]

Thank you so much Dr. Shareef. I'm Mohamed Shareef from Somalia. Studies Civil and Infrustructure Engineering at City university Mogadishu-Somalia.

[@baro9084]

asc

[@dahirh5160]

i.a waad shameysa fila 3 sano kadib

[@mohamedsharifhassan7524]

@@baro9084 wcs

[@mohamedsharifhassan7524]

@@dahirh5160 Haa alx waan dhameeyay

[@user-yw7cm2rq1e]

Well explained.

[@mohamedthasneem7327]

Thank you very much sir

[@teesa3253]

Please make a video on designing piles and applying spring constant along the depth of piles. Thanks

[@starttobestar5535]

thank you very much professor i would ask you about the design shear for concrete how can I calculate its ?

[@visakhs9996]

Excellent presentation sir.simple and understanding.

[@MrElgamal77]

Glad you liked it. If you like it, share it with your colleagues.

[@georgespaquet6920]

VERY GOOD VIDEO TRAINING,

[@latifiddrisu2825]

Thanks so much Dr.

[@MrElgamal77]

So nice of you

[@hadishandai1182]

Thank you so much

[@Ricky-d97]

Thank you sir this was very clear. Do you by anything have any lesson on long/slender columns as per BS8110

[@pragsac7697]

Great explanation. thank your your video

[@MrElgamal77]

You're welcome.

[@loloezzat9254]

شكرا لحضرتك جزاك الله خير

[@MrElgamal77]

و انت كذلك. شكرا على الدعم.

[@KingsleySomtochukwu]

You are much more good to be a lectural. I appreciate your lecture.

[@MrElgamal77]

So nice of you. You can help by like and share to transfer the knowledge

[@bdlamuntesilamare5582]

Romanian foundation design code for isolated footings is simple: To assume a linear distribution of the pressures, you need to ensure proper rigidity of the pad footing. This can be provided by respecting some prescribed ratios between H/D>=0.3 (Height of pad, D- bigger footing length). If not provided, you have to check one-way and two-way shear. Otherwise, it is just a recommendation.

[@Original_oven]

Great explanation as usual! but how do you find the effective depth? do you simply assume the number and calculate based on that? or is there a specific method to be used?

[@DJayDNA]

If you're referring to "d" then I believe it's the distance from the top of the foundation to the center of the bottom reinforcement, if I'm not mistaken.

[@sobhanfarahani]

excellent

[@nabindahal8043]

Love this tutorial. Great explanation!!

[@chathuradissanayake4486]

Thank you very much! Could you please upload a lecture for Liquid retaining structure design to EC2. Appreciate very much there is no guidance anywhere. Please!!

[@gullamgullam7646]

Also you are most welcome to Tanzania.

[@nadeem314]

Sir while designing footing, we satisfy only shear failure criteria soil or both shear and settlement criteria?? Plzzz rpy sir🙏🙏

[@jakariahosainuzzal3292]

Love from BD.

[@mohammadifrahim]

Salamat, from Pakistan.

[@nadeem314]

Sir which bearing capacity is used in design of footing?? Example: Safe bearing capacity or allowable bearing pressure

[@jayeshghimire8566]

Thank you so much for explaining this. Could you upload a video on theory, analysis and design of staircase? Love from Nepal

[@MrElgamal77]

I will try.

[@lakshmidevilakshmi3577]

Very Good sir,

[@abdiqanicaligalol6192]

Dr. Sherif Thank you and I would like to ask you to add us staircase lessons in the you tube 👍👍

[@heshamalshammari5393]

الله يجزيك خير يا دكتور

[@adilrehman591]

can you please a video about retainng wall

[@mazenabdu5205]

او شرح عن كيفية تصميم القواعد اللبشة بواسطة الكود البريطاني B.S بحيث يكون تصميمها as flat slab

[@sudarshannikam5243]

Very very thanks Sir.

[@MrElgamal77]

Most welcome

[@phyohtetkoko929]

Thanks For Teaching Sir

[@MrElgamal77]

It's my pleasure. Share with your colleagues.

[@mohammadashoury5547]

جزاك الله خير ,الفيديو افادني

[@MrElgamal77]

Thank you for your interest. If you like it, share with your colleagues.

[@mohammadashoury5547]

ان شاء الله@@MrElgamal77

[@tiibomartinsikalesele9098]

Hello Dr El-Gamal. May i know the formula for calculating Maximum Bending Moment and Shear Force for a strip footing

[@uwicyukipuculi9509]

Thx sir❤

[@haseenabegum183]

Sir assalamualaikum i ask you if column jalli not centre of column because is less space. now what i do i design of uniaxel loading or not please your comments.

[@user-ym5ls5jb8q]

nice

[@onaziagbese7779]

Thanks for your fantastic videos Dr. 🎉 Assuming that the 40xbar diameter anchorage length is still too much length for the space available in a section, even after bending up the bar at 90°, what is to be done? Every other thing is well satisfied in yhe the section, just this anchorage length 40xd issue

[@MrElgamal77]

Thank you for your nice words. You will never have such thing. You will need bigger bar diameters in bigger footings and therefore you will have more distance for the development length.

[@yeamin2906]

Thanks

[@MrElgamal77]

😊

[@hamedsaid2938]

دكتور جزاك الله خير الجزا على الشرح الجميل لو تكرمت من وين اقدر احصل تفاصيل تسليح القواعد ف الكود البريطاني فيما يتعلق ان التسليح السفلي للقواعد يكون في الاتجاه الاطول من القاعدة والتسليح العلوي في الاتجاة الاقصر ؟ وماهي المشاكل المترتبة اذا عكسنا

[@sharmakeabdullahicisman4396]

Thaks dr sharif I wanna to ask you a quastion Transverse shear stress or direct shear stress < 2VC shear capacity of the section of footing That compare V

[@lansanah.kamara5299]

Fantastic

[@MrElgamal77]

You are welcome

[@esavideoeditingseoservices1883]

🎉nice

[@chavinnao9377]

Hi, thank you very much for this nice video. I have a small question, Why do we take SLS loadings (and not ULS) to calculate footing size? Thanks.

[@MrElgamal77]

Thanks for your interest. The footing area depends on the allowable bearing strength which is a SLS not an ULS. Therefore we use the service load not the ultimate.

[@chavinnao9377]

@@MrElgamal77 Thank you Dr.

[@DJayDNA]

Thank you so much for this Dr El-Gamal. One question regarding shear stress; if it exceeds the concrete shear capacity, you mentioned that the solution is increase the height (H) of the foundation. Isn't another possible solution to use shear reinforcement?

[@MrElgamal77]

Yes you can but it is easier to increase the thickness

[@DJayDNA]

@@MrElgamal77 I see. Thank you for your quick reply and fantastic work on your videos - really helpful and well explained. Keep them coming 🙏🏼

[@MohamedAhmed-ht6vc]

Thank u Sir. Can i get the ppt power point.

[@mazenabdu5205]

جزاك الله خيرا دكتورنا وربنا يجعله في ميزان حسناتك بما تنشره في مجال الهندسة المدنية، بعد إذنك دكتور هل ممكن تعمل فيديو يشرح كيفية تصميم البلاطة الفطرية flat slab بواسطة الكود البريطاني B.S ولك فائق إحترامي وتقديري ..

[@heshamalshammari5393]

ان شاء الله الدكتور يشرح الكثير ليسى هو في البداية..انت وين بتدرس ؟ هل بتدرسوا في الكود البريطاني؟

[@mazenabdu5205]

@@heshamalshammari5393 تمام ربنا يبارك فيه الدكتور ع شرحه المتميز .. انا من اليمن وادرس ع الكود البريطاني بس مشكلتنا في اليمن ما يعطوك المهنج كامل روؤس اقلام وما يتوسعو بالمهنج المقرر ومها أوضاع الحروب والأزمات الحاصلة يطر الطالب أو المهندس يبحث ويجتهد بنفسه ..

[@heshamalshammari5393]

@@mazenabdu5205 حياك طيب باي جامعة انا من اليمن أدرس في السودان سنة رابعة..انا جالس انشر للدكتور على صفحتي على الفيس حتى يستفيد الطلاب الاخرين

[@MrElgamal77]

إن شاء الله.دعواتك. لكن فيه أولويات لازم اعملها أولا.

[@mazenabdu5205]

@@heshamalshammari5393 هلا حياك اخي تمام جزاك الله خيرا .. وربنا يوفقك في دراستك . انا تخرجت ٢٠١٦ من الهندسة المدنية في جامعة عدن _ كلية الهندسة

[@kawtharmohammed9749]

السلام عليكم بعد اذنك اذا مطلوب نصمم shallow foundation والمعطيات Df وIDP و IDM وp و M مع fs=3 كيف اصمم؟

[@teodorogozarin8550]

can i give me a sample of footing design

[@dawit3seyoum598]

is okay we will try to revise.

[@ChucksEhtreppar]

Remain blessed sir 🙏🏾

[@MrElgamal77]

Thanks.

[@engaidaruosabdimatan218]

thank you DR.Jazakalah please may you send me the ppt or pdf

[@BA-gp7sr]

Why don't we provide steel reinforcement for shear ?

[@tehsoonguan9343]

Bravo

[@MrElgamal77]

Happy to help

[@mohameddiabate3460]

are you using Eurocode 2 designing the fondation?

[@MrElgamal77]

No. I am using the BS8110.

[@suhaibkhan7356]

Sir if have link please send,, how to check stability by eccentricity in half area footing,, like in boundry walll

[@MrElgamal77]

Sorry, I do not have it.

[@sajujmathew5625]

How is the moment calculated ? for the second case

[@MrElgamal77]

What do you mean with the second case?

[@user-mr6r270rpu]

This is from IBC?

[@gnidnoeled786]

Dr. El-Gamel, is it correct to say that Gross Soil Pressure should be lower than the allowable soil bearing capacity? Gross Soil Pressure = (Column load including its dead load + Weight of soil above the footing + weight of concrete footing) / area of footing. Anyone ?

[@MrElgamal77]

Yes

[@gnidnoeled786]

@@MrElgamal77 Shukran.

[@santostekleab8700]

this is it.

[@MrElgamal77]

Thank you. If you like it, share it with your colleagues.

[@kareemgiadi8904]

ياحبذا شرح عربي

[@teodorogozarin8550]

sample offooting design

[@wheres_bears1378]

If these are the basics I’d hate to think what advanced it haha

[@16jaaroudmeisje19]

Hallo