Moving a 600 Horsepower Armoured Shed (FV4005)

Today Ted, (workshop manager) oversees the operation of fitting steel tracks to the hull of the FV4005. And with his calculated and precise lifting plans he decided to make the team work harder, grabs the Foden and places the turret back onto the hull.
Get your FV4005 merchandise here, sale still on!
shop.mrhewes.co.uk

[@unlockedpluto6748]

if you watched this and didn't like SHAME!!!!

[@kyanhwillen1708]

Good video

[@MatteoBelongsInAmentalHospital]

i never like, but sure

[@buahcs]

I liked on both accounts. This is amazing

[@kolle4543]

Props to my WoT crew repairing a broken track in 4 Seconds from inside the tank

[@fishfan0]

Props to my WoT crew for staying calm while I'm doing a fucking flip

[@ucduongngo5576]

Having a fiat500 next to the tank really helps to imagine how big of a lad that tank is.

[@MrHewes]

Do you think we will have it done in time for Tankfest?

[@Not_so_average_gaymer]

I'd say you have a strong chance as long as there are no problems

[@nigelleyland166]

..just as I was typing...lol

[@arpmuless_official]

Question: How would you go about restoring the fighting compartment and fitting the fuel tank when the turret is on? Would it not be easier to do that before fitting the turret?

[@cawsticky1322]

Shedfest was this weekend ;)

[@gingie2122]

@@arpmuless_official He's just test fitting the turret. Probably.

[@StevenG222]

Without the boom pole you still have the ultimate off road camper!

[@etherealbolweevil6268]

The big pole is useful for drying the washing, or rigging up a tarp.

[@bare-footjo35]

Or flying your camp colors, or food procurement.

[@Dornacgove]

@@bare-footjo35 quickest minced meat prep in the world? Only it takes a while to collect it afterwards

[@etherealbolweevil6268]

@@bare-footjo35 Is their a shotgun cartridge big enough?

[@bare-footjo35]

@@etherealbolweevil6268 H.E.S.H. not good enough?

[@scottbruner9266]

1:31 never realized that tank tracks would make such a nice adjustable fence 😂

[@paralogregt]

I know one frg member who wrote off his car hitting a piece of curled up track.

[@niuchajianfa6222]

for toddler yes

[@copee2960]

You should be very proud lads... truly a fantastic job...history being restored before my eyes....what KZbin was invented for .. educational...and fun.

[@RupertBear412]

I wish we'd had a forklift when we were fitting new track - it normally came in either 4 or 6 links in a pallet and we had manually lift and connect all the links together and then break down the old track to go back into the pallet for disposal - character building they used to say :)

[@ThePhoenix198]

Supposedly a crew task, but we always made it a Troop-task, just to get it done in a reasonable span of time.

[@dartmoordave]

Smart guys always bribed the Eager Beaver guy to turn up. We had a JCB 3c with forks, no bucket. too easy.

[@wayneholmes637]

I hated track bashing...

[@akula9713]

Do you foresee any other future restorations of vehicles from Bovington? You must be all very proud, quite rightly so for such a fabulous restoration. It’s a legacy that will outlive you all. Whenever it appears in photographs or films, you can proudly say “we did that” 👍🏻

[@MrHewes]

We would love to continue working with them

[@kevincollins1060]

The tank destroyer Churchill 👍🏻

[@james5796]

What a pleasure watching you genius guys fixing tanks!!

[@STHV_]

The FV4004 Conway and FV4202 would probably be quite straightforward. Maybe even Tortoise too

[@Zermattquattro]

Can they be persuaded to drop off something like a Jag-panzer for restoration next?

[@porthos6803]

This is awsome never expected to see the FV4005 working again ever from its old previous condition

[@WinterroSP]

It does have a different hull than the one that was on display. (The turret is the same)

[@Dadhj.]

@@WinterroSPthe hull it was on in the museum was a mk10 hull which was incorrect so they are putting it on a mk3 hull which is the type of hull original

[@deskmat9874]

What happened to the original hull??

[@seasons1745]

@@deskmat9874the original was supposedly removed from the 4005 turret and remated with a Mk3 centurion back into service

[@mangore623]

Hopefully, you’ll get a contract to fix up a few more of the Tank Museum’s pieces that need some attention. Coming from an antique restorer, you guys have done a fantastic job.

[@keitht3055]

Bollocks to the tank thingy! Massive congratulations to Jack and Mrs Jack 🥂🎂💑.

[@keitht3055]

Already! He's only been married ten minutes 😮.

[@slammerf16]

@@keitht3055 It doesn't seem to have cheered him up, though!

[@Commodore_westaway]

@@slammerf16 ha you didn’t know me before I met my mrs 😂

[@MrDibs9989]

⁠congrats jack to you and the wife

[@lordcaptainvonthrust3rd]

You guys should be knighted for this amazing piece of British Military history 👌 Arise Sir Ted

[@TheSkylaura]

Ted is receiving love from Titusville FL USA. Since my dog Gomer passed 2 months ago seeing Ted with you makes me smile and think of my pal Gomer. Love you all Mr. Hewes but special love for Ted.

[@MrHewes]

Sorry for your loss

[@TheSkylaura]

@@MrHewes Thank you. You can just hug Ted for me then.

[@2dogsf-ing]

Hey, another Florida viewer. Nice. Charlotte county (west coast) myself. 😉

[@ibubezi7685]

Why doesn't the Spaniel (kzbin.info/www/bejne/pXbMZISfn7Cleas) get ANY love? At all??!?!?!!?

[@TheSkylaura]

@@ibubezi7685 Because she for some reason is not around on Camera. I like her as well but don't even know her name. I just heard the spaniel called a good girl.

[@michaeltemple8333]

Good to see Ted heavily involved in supervising this segment. No squashed fingers with Ted on the job!

[@MrS00p]

There's a marketing opportunity - 'Mr Hewes Grumpy Jack Cider' seriously though, great work!

[@alanbates1471]

Good to have Jack back, his helpful comments are priceless - "Brackets Mate, Brackets, They're Brackets"

[@peghead]

"Hope you enjoyed the video . . ." a complete waste of breath, I ALWAYS enjoy Mr. Hewes' videos, Regards from the former New World Colonies.

[@mojocrouse]

All eyes will be on that lovely beast at Tankfest. Wonderful restoration. Also congrats on your marriage Jack.

[@Azureecosse]

Its great how caring you are towards Ted, he is clearly a special friend and he is important to the channel and the workshop.

[@iwanvanderhut4159]

That's bloody incredible, from gate guard to working in no time really. Well done.

[@farmersboy]

Just making a a batch of chilli. Sat back down at the laptop for simmering time, and this little beauty appears. Excellent work there Ted.

[@jadeboswell-rz2ly]

You guys deserve a gong, especially Jack with wedding and all. Think everyone should be well impressed with your efforts and professionalism to bringing the FV4005 back to life.

[@noelmcgarry456]

You make it all look so easy

[@AngryCanine]

seeing the turret swing around just before being dropped onto the hull was basically like seeing the turret rotating on its own as if it was on the hull. It is really exciting to see how close it is to being complete! It is also really cool to see it moving under its own power with the turret

[@ChaosPootato]

"What a noisy piece of sh-" hahaha :D It looks absolutely majestic when entering the hangar

[@nicholasviney5975]

It's a beast and looks amazing, good old Ted doing a grand job despite the Jnr staff flirting with him.

[@Ayane13b]

Never clicked so fast in my life

[@Tbot_305]

You should make a playlist about the Fv4005 coming together.

[@MrHewes]

I have check it out

[@dbenci2071]

Being able to restore a one of the kind object like that is a real honor,and it speaks volumes to you and your guys ability to do things right. NICE!

[@britlitemail]

Not gonna lie I wasn't expecting a BREAKFAST reference. Not disappointed. Nice work fellas, glad to see it's coming along.

[@alanmoffat4454]

YES THATS THE EASIEST TRACK BASHING I'VE SEEN FOR JUST THREE PEOPLE AND A DOG.😮😊

[@MercuryGremlin]

Epic series with the”Big Green Fighting Machine”. Just gets better and better. SO satisfying watching those pins go in. That Foden is worth its weight in Cheerios… Crack on team Hewes!

[@nonyanks2510]

It Runs, Moves Pops and Booms, what a Beasty, welcome back Jack !

[@tayahwheatcroft]

Anyone else notice Jacks scratch and sniff test? 😂

[@andrewnorgrove6487]

" its not the sort of thing you can un-see is it " 🤗 🤣

[@jodelboy]

timestamp?

[@stephengunrunnerhanson3550]

And another is brought together and that long barrel cannon for a better word it's going to be great to see that cannon mounted. and another great video

[@Pancierovahlava88383]

Yeaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa!!!!!!!!!!!!!!!!!!!!!!!!!!

[@nilo70]

WOO WHOOO ! You Guys ROCK ! Cheers From California 😎

[@gdmonks1959]

The history being reborn is off the chart, well done to you and the team for resurrecting the FV4005

[@peterwardle572]

That is a hell of a turret, it makes the tank look small, I am not sure I would want to be in it when the gun fires, it looks great, if not a little unreal, what a mad machine.

[@bigmac60]

Amazing work from everyone. Well done. But are we to be worried that Ted seems to be branching out on his own. 😮

[@MasterSawdust]

A work of passion and so good to see this progress! A journey we all have enjoyed - you've done the Country proud

[@belchnasty]

This video is a masterclass in Youtubing. Great content, great editing, great camerawork. No zooming in, long informative shots. Why you only have 226k subscribers is beyond me. You deserve, and i'm sure will have a lot more!

[@MrHewes]

Cheers I’m trying to improve with each video

[@stum99]

Such a great series, its a joy watching you guys putting the 4005 together

[@philhermetic]

You made that look easy Mr Hewes! Experience!! Phil

[@christiansvensson7474]

Good job Ted and Team 👍👀✨️👏

[@d.r.4453]

I've been loving this FV4005 restoration! You fellas are doing a top notch job. Ted's supervision is right on point. You'd be lost without his expert advice. Nice work all!

[@pirated8557]

Hard to believe it was conceived and built in the first place . Amazing job people. Good camera work and sound . Great video 👍🏼

[@nigelleyland166]

Hope everything goes along well gents, it's looking like she may be sorted in tme for Tankfest!

[@doodskie999]

That's a nice armored barn you got there

[@marklelohe3754]

Well done chaps, a bit of history restored. Congrats to Mr & Mrs Jack.

[@kippamip]

I caught this one late as I was catching up on Clarksons farm. Great to see Jack's midget arms back. Top tip for track tension: if you want to tension the left track, slightly neutral turn right and the slack will come to the front, and vice versa. That way you can collect the slack easier with the idler wheel. That's how we did it on chally 2, only we had hydraulic track tension so no hand cranking 👌🏼👍🏼.

[@wazwulf2698]

awesome work guys

[@donkeykong7777]

I think Ted needs an inflatable paddling pool to lay in! Well done Jack, not a virgin anymore, was it worth the wait? 😛 That thing looks amazing 👏👍

[@adamhoffman3687]

Looking good girls and boys. Congratulations Jack and Mrs jack. Looking forward to the next video.

[@thedaddymac5833]

Amazing work, such a great channel to watch. Please let’s push the algorithm to help spread this amazing channel to 500k then 1 million subs. Better than mainstream tv.

[@LOKI-vk5hx]

Good to see Jack hasn't suffered any ill effects from his honeymoon. I never had a set of tracks fit that well, the track gods were looking down on you. Roll on next video.

[@user-hf7op9pg8t]

If the engine works. Lay the track out in front of the vehicle, put a track rope on the first link and run the rope over the top rollers and around the sprocket, then use the engine/sprocket as a windlass to pull the track on, when the track gets to the sprocket and has engaged with the sprocket teeth remove the rope continue to drive the sprocket until the track meets the track under the last road wheel. Because both tracks are off you would have to pull the vehicle onto the track. Once one sides on you can move the vehicle onto the other track using the gearbox. I was in the Armoured corps for 23 years and that's how we did it on CVRT, AFV432, Chieftain and Challenger. Just a thought. Keep up the entertaining videos. 👏

[@MrHewes]

That sounds like a lot of work, also it’s only me and Jack, in the army you probably had 10 men. Remember there’s more than 1 way to skin a cat However thank you for your service

[@user-hf7op9pg8t]

@@MrHewes we normally had 3 men, maybe 4. Not a criticism of how you do it I just feel there's an easier way. Please keep up the great work, I really enjoy your posts.

[@lesallan4042]

I did that with a cent track in bovvy , just me and a driver , using a track rope and the final drive .

[@wayneholmes637]

That's exactly how we did it on our Cent AVREs and Chieftain AVLBs too. The worst part was joining all the 4 link pieces together and afterwards splitting the old track. Two men could carry 4 links but it was easier with three of you. As we usually had plenty of time it was usually a crew job and if you had somebody who was good with a sledgehammer it didn't take very long either.

[@wayneholmes637]

​@@MrHewes actually the easiest way to do it.

[@paoloviti6156]

You guys really did great with your massive Tonka toy! Again and again the Foden is proving it's worth easily moving the turret to its place and doing a great job with its tracks quickly. Congratulations with the wedding 💑

[@yellowsnow3429]

Congratulations Jack.

[@gavinniles60]

With a bit of help from the lads Ted has done it again His video skills and direction have no limits Well done lads and keep up the good work

[@IAmTheCoastalGhost]

Vid quality getting better and better, this is a major milestone! Hope you guys are congratulating yourselves!

[@peteredwards2318]

I've had bedrooms smaller than that turret, and the paintwork has never been as nice either! Top job, everyone involved. Class.

[@peterfrazer1943]

Best videos on KZbin. I never realised that the Tracks only ran off one series of Sprockets each side, for some reason I thought they were at each end of the Tank.

[@ioanwilliams9987]

Ted is just thinking nice weather for a cold pint 😅

[@Mello-bw7tx]

Congratulations Jack 👍

[@WiLLiAMOnline]

Superb chaps and lasses! Thatshed could be parked in the turret it's so big.. and extra points for wedding dancefloor singing!👊🏻

[@chris.swearengin]

These tanks look really amazing to me. So cool to meet a KZbinr that messes with military tanks old tanks. Thanks for sharing. Much appreciated.

[@Carson-to4zr]

“That identifies as a hammer” pans up to a wall of hammers behind him😂 i love this guy

[@magilla8026]

thanks for doing my mum jack!

[@1lyg1I]

Thank you for restoring this tank, besides the last one in existence. I'm glad to know these tank can ride again.

[@depleteduraniumcowboy3516]

Awesome to see this beast come together. Thank you for sharing this adventure.

[@anthonybaiocchi3028]

Get a sarong or an old towel, hold it under the yard tap for a minute, ring it out and presto! You have dog air conditioning. Rinse and repeat when said towl dries out. Ted will love you, that cold cement floor, and a thin wet towel over him. Used to do it to my black Dane in Africa when it got really hot.

[@endy8411]

"The gun is live" I think we ought to get the British Military and Bovington Tank Museum to produce some shells and a firing range for it. Let everyone see it delete some stuff.

[@lilianecasner3336]

A piece of history being put back together fabulous!

[@levinbell5925]

10:50 love the way they both popped up like Punch and Judy 😂

[@raytheron]

Super job! Yep, Jack's back and louder than before! 🙂

[@MikeDent]

Amazing work, well chuffed for you, great to see it all coming together. Also glad for a bit of bully back at the end. ❤❤

[@geordiegeorge9041]

That brings back memories, track bashing in the summer heat in Germany. Getting ready for autumn exercises.

[@mattsta1964]

And the sun is shining across South Leicestershire! BIG bonus

[@archerhewitt385]

Armoured shed is an accurate statement. Good luck from Canada

[@johnnapier8192]

Still cannot get over how clean and shiny the engine compartment (+ contents) is! Its a reassuring relief to get a peek into the rusty driving section, which looks its age!!🤣

[@deanedeane4318]

Bloody good job Ted Camera Crew and Lads !!! 😉🙃😎

[@mjjr1000]

Nothing short of brilliant work by the lads yet again. ⭐️⭐️⭐️⭐️⭐️ job.

[@3dwrecker_4660]

I think you guy's will be able to get it ready in time, seem to be doing pretty good progress every video

[@ianb6595]

I really hope so for tankfest it’s got to be a must, brilliant work from the team, looking better all the time, congrats jack

[@andyfreeman660]

Looking forward to seeing the gun being fitted. I have some experience of shoving long skinny things into narrow passages but never required a Foden.

[@psp1921tsmg]

Your videos have been popping up on my feed because I’m interested in military history and the picture of the 4005 with a turret on is……… freaking awesome!!!!!!

[@allobject]

0:02 little 'Tall Mr Hews" next to the gigantic turret... I enjoyed the take very much.

[@user-di4kv9yk3g]

i thought the lads looked like the windy chap on one of them kids windmills you had in the garden back off them 80s great vid boyz

[@teeslunk]

Looks great 👍

[@sies5580]

love how when you "hammered" the "pin" in with a pin and ratchet and a wall of hammers right next to you.

[@slincolne]

Glad Ted is on the job - things seemed to go very well with him on charge.

[@georgebernard8983]

That’s a battleship turret on a tank hull! Wow!! Even with a camouflage paint scheme you aint hiding that thing!!!

[@babaganoush6106]

you guys have too much fun.....i am so envious.

[@markmilner6729]

Well done guys and this video is released on my birthday top pressie watching the tracks and turret going on and it driving into the shed 👍👍👍

[@kiwidonkeyk1656]

There is nothing like an improvised hammer, especially when you have a selection on the wall right next to you. And a nicely turned cider can! I suspect by your product placement you want to keep Thatchers supplying the shed.😄

[@brandons9398]

I’ve said it once and I’ll say it 1000 times, when Ted is on the job a lot more gets done. That thing is absolutely fantastic and completely totally massive!

[@yearsley89]

"I love these things cuz this is really finger trapy horrible now" 😂😂 It's been amazing to watch so far, what a project to get old spud up and running! My only downside is I'm not going to be able to watch it on the arena this year due to other commitments 😢

[@johndrew3202]

That was quite some vlog! To see those steps towards completion carried out so perfectly makes me realize how professional you have become, how tidy the workshop is and a clean flat floor, and how good the camera crew are!! Well done.

[@EwanWeetch]

Been waiting for this video all day! Awesome work and congrats to all the team!

[@lawrietaber657]

Absolutely fantastic work guys well done .

[@anthonyross9276]

Bravo gentlemen!