NO EXCUSES! Every Crown Vic Owner Needs This!

Get your very own pair of Stark LED Headlights ONLY for the Crown Victoria!
www.ebay.com/i...

[@MrRandomReviews]

skip to 3:40 for install

[@bergePanzer581]

Thank you for uploading this. I was honestly wondering what the beam spread would be like in our housings. Our 9007 bulb design and their reflectors leave much to be desired.

[@f4phantom233]

Mr Random Reviews what happened to Project White Lightning?

[@paulboss1159]

Mr Random Reviews can you tell me where I get that from

[@Kemari101]

Mr Random Reviews what about 98 vic

[@isaacclemons1187]

Mr Random Reviews yes this is Big Ike with the 2004 Ford Crown Vic interceptor you call him black beast

[@gabrielrangel7916]

At my Career Center in highschool we (Electronics & Robotics, Collision & Repair, and Automotive Repair) were given the task of equipping a CVPI P71 for our towns PD. It was a blast installing the hide aways, light bar, upgrading the spotlights, and doing the led headlights. The PD used the car in parades mostly and it sat in the PD lot clean and shined almost everyday to show off. It wasn't used in the fleet and they had a decal that said "This vehicle was built by the local ISD." Damn, doing all that work made our classes proud. And getting to see the Police Chief's face as it was driven out of the AR garage was priceless. It was early 2000s model (2004 possibly) that needed lots of body repair done. Loved that thing

[@alejandrob-c2277]

Damn that sounded like a blast

[@Smokey420Greenleaf]

so... the moral of this story is that the local police department, who likely bought the car with tax payer money at a huge discount through the department of defense, also basically used slave labor to install all it's flashy toys, but you guys were stupid enough to not even realize you were being exploited... wow. child labor is illegal without compensation and consent from a legal guardian.

[@gabrielrangel7916]

@@Smokey420Greenleaf the school bought the car

[@white92LXnotch]

I have had them in for a week now, they not only look great they work great in rain, dust, and heavy snow. Street signs are 1000 times brighter and easy to read from a distance. I did rotate the bulbs so the high beam LED is faced toward the bottom of the lens. I have not been flashed once either. Awesome buy and if they last me a year I will be stoked!

[@scfirefighter6235]

They still working ok?

[@prospectxv7703]

Still kicking?

[@aidinmclaurin9867]

I absolutely need these, the last time I drove through the mountain pass I had to follow a semi truck for safety. Thanks!

[@RoGuExPaNcAkE]

Came back a year later for the link cause I FINALLY got a CVPI

[@DALE226]

Been watching lots of his videos in preparation for mine, getting a 2011 CVPI in a week!!

[@daltonengland2282]

Same bro😂 amazing car

[@ChiefStones]

Thanks man. I hate the lights in my Vic. This will be a great improvement.

[@vulpe_the_valiant]

glad you posted this - i needed to get some myself. still trying to figure out why my engine despises starting when i open the gas cap ….

[@caddiman9834]

I want to apologize for a comment i made back when. I watch all ur episodes and i enjoy and grow from ur content. Im man enuff to admit that i underestimated u and didnt realize ur knowledge on Crown Vics/ Grand Marq. So please understand.🤙🏼

[@MrRandomReviews]

🙏👊👊

[@cardinaloflannagancr8929]

Excellent video you don't always see people actually noticing the aim very often. Commonly just a look at the color tone and maybe against a door. Do you have a video of them after adjustment yet.

[@fluke770]

Thank you for this. I almost hit a steer in the middle of the desert highway art 70 mph the other night because my Vic lights are so dull out here in the AZ desert.

[@Kauffman578]

Trying driving through the mountains in Montana

[@junkddisgustipate7812]

Love your enthusiasm and positivity man. Keep it up

[@ThinkTwicePS4Gaming]

the install helped unlike every other video i saw thanks!

[@davidbrennan5]

I installed some HID's on a truck behind projectors. It was so stupid bright even when I aimed them far away from the left lane it would blind people bad and piss them off. I could see signs that were miles away on the horizon lol. I had to remove them, I just buy good bulbs now.

[@gregvandy8902]

I bought new housings, installed led bulbs(torchbeam, $50 Amazon) and they were very bright, but didn't direct the light well at all, I got flashed constantly, got pulled over too. So I put stock bulbs in until I found a HID retrofit kit($140 Amazon) and not only do the projectors look ridiculously cool in the housings, but they direct the light perfectly with a sharp cutoff. I can see better at night than at daytime, almost anyway, they're that good. Look into em if you haven't yet, absolutely amazing and it's less than an hour install, super simple, and won't blind anyone. Look at pics online of vics with projectors, and LEDs just can't compare, the hid projector is just next level. My friend aimed his LEDs down to avoid getting flashed/pulled over and that mostly worked(although the LEDs still throw major light all over the place), but aiming down helped until the LEDs melted his housings. Yeah they get that hot so make sure you have a set with good heatsinks or fans is even better. Yes many led bulbs have fans, they're that hot. Better yet, go with projectors, it'll blow you away how well they light the way and they look amazing in the housings, day or night!

[@zachjones7054]

Is it possible for you to send me a link to those? Thanks!

[@maurylee5239]

I bought the Cougar Motor fanless LEDs for my 2001 Crown Victoria. They don't have screws under the red gasket. You just twist the plastic base of the LED light and the back end with the fins comes off. You still have to take the LED bulb out from the base to get the larger holder ring to fit on the new light. The red retaining gasket on the new LED was thick and very hard to push into the light fixture. I put some vaseline on the ring and that allowed me to force it in. It took longer than expected as the instructions are minimal and don't pertain to your particular car. I will be testing them tonight. Just wanted to comment that the new fanless LEDs from Cougar do fit, just a little difficult to do.

[@jerimiahjameshervey]

Unfortunately there no longer available, now that I'm have my own Crown Victoria

[@dr.hugog.hackenbush9443]

Im running Silverstar Ultra regular bulbs in my P71, and it ain't too bad at all..

[@sheepdogbounty2183]

Major difference. Thank you for the video. Didn't even think of that for my P71.

[@michaelblevins559]

Mr.random just installed these on my own Vic and wow thanks for the video

[@alimiramontes608]

Just installed mine and I love It! Thanks Mr random

[@LoveIsA2WaySt.]

idk if its because mine are brand new but I really like my stock headlights and the way they look, but I will keep this idea in the back of my head

[@harysuper]

I installed LEDs in my B-BODY Roadmaster. HUGE difference

[@vegansaxon3962]

I saw a Roadmaster for sale in Zephyrhills Florida...I think they are cool looking

[@smokeymagpot5569]

i cut out a piece of the housing part with a small adjustable hand saw. its tricky to do but it works for the aftermarket led lights. did it on my voyager and ima do it on my merc

[@WJHandyDad]

How are they with oncoming traffic? They look like they are blinding

[@CTN-dj7fr]

They may be safer for you, but not for everyone else. That's one of the main issues with modern cars. I'm not old enough to drive yet, so obviously i don't own a car, and my family is basically too poor to get anything other than lemon 1980s and 90s cars with halogen lights, but other people with modern cars basically blind you on the road, for a brief moment you can't see much, which is very dangerous.

[@white92LXnotch]

Just ordered the ones in the description for my 08 P71. I have been saying for years I would get them. If they last a year I will be stoked!

[@notshort9796]

I've never had someone complain or flash there brights at me but once cause I put them in wrong

[@NGGPeter]

Not true. People with OEM LED headlights that are considerate enough to turn off their high beams for you at night do not blind you. If everything is at factory setting then it shouldn't be blinding.

[@bennettfriesen33]

It's really all about how they're aimed. If they're aimed correctly, you won't have any issues with blinding people. However, if they're aimed even a little bit too high, people are gonna be flashing you left and right.

[@vipersyl]

Thanks for the shout out bro! It’s Amazing! The car looks sooooo good now! I hope your happy with the results!

[@hotrodmercury3941]

Met a mechanic who works on Ground Equipment. Was swapping out headlights after work one day and he walks up and notices I am struggling with the bracket. Instantly takes out the headlight bulb through the access port behind the bulb. Thats what the big hole is for behind the bulb so they can replace it at the dealer quickly. The more you know!

[@JoeyMontana151]

Glad I saved this on eBay they sent me a 15% off on anything. Took advantage a got then sent to me. Just installed them today and damn what a difference..... We have all been deprived of good lighting, folk you need to buy these. Thanks Mr Random.....

[@icantgivecredit871]

Isn't it illegal to use an LED bulb without installing a projector meant for LED bulbs? Simply putting an LED in a housing that's meant to spread the light of a halogen bulb gives the wrong effect.

[@NightmareKato]

In some places, yes, but that mostly applies to HID.

[@JamarD421]

IM SORRY IT already what? Lol 5:20

[@claudiuskundanmal5401]

I just bought them from the link and they are not the same, plastic doesn’t twist off of bulb it’s screwed on and the connectors don’t match up very disappointed you made it sound so easy now I’m sitting here holding my headlights having to put it all back together again accomplishing nothing

[@BabyBoomersDoomer]

I prefer to the stock bulbs. They they are bright but not glaring on coming drivers

[@davidjonessr330]

Hey Mr. Random is there another link you can find for the headlights

[@TheLordsDeciple]

If you're a ham radio operator or use a cb, those led's wreak havoc on the radio. You can't hear anyone .

[@j2d4oi]

Make a faraday cage type barrier to place between the antenna and lights? I don't know how, but just a thought

[@ogloc6308]

lmao ive been pointing my spotlight directly infront of the p71 on dark roads

[@Mik35959]

Also I noticed in one of your other videos you got a hard on over the transmission lock where you have to press the bulb on the floor? I can send you one if you want it.

[@ferminocon9667]

How have they worked since you bought them? thinking about buying a pair

[@ericmeyer1373]

U gotta have LED housing if you install bulbs otherwise it blinds everyone. Or if you know how to aim the lights, you can do that too.

[@albertorivera2062]

U should do the ford focus fog light install on the vic big help for lots of vic owners lol

[@cartcam6856]

Alberto Rivera agreed!

[@curtbilyeu8701]

MR RANDOM its june first 2019 do you still like your stark led lts? please let me know.

[@kerbinsall4712]

I just bought a 2010 cvpi with 115000 mi. Want pushbars suggestions, please and backseat, please and thank you!!!

[@johnelvic845]

Hey bro I been looking for a cobra bumper to installed to my crown vic. Can u do that too. Is nice

[@carlosgreat4559]

U da man! Keep these cool videos coming! 'MERICA!!! 🇺🇸

[@bakersfieldscannerchasers7464]

Love the push bumper on your crown Vic bro, any way you can do an install/review video of it? I have the same exact one and can’t find any info online about it

[@12taurus]

I had a set that I had bought online for $40 for my Taurus. I upgraded to a Grand Marquis LS and I put them in this. They quit on me in a blizzard.

[@jaxsonwittenhagen2119]

Which headlight brand should I choose for my 2010 police interceptor? Hard to find a decent brand that had good reviews.

[@57fire]

Mr. Random why don't you use the Starr HID projector headlight instead? Gives you the full housing and everything with the better light output?

[@prospectxv7703]

And it works for the crown vic still?

[@bully5991]

What size are the bulbs? Link doesn't work anymore

[@ginomanshit2365]

9007

[@YipperX5]

The Sylvania zXe Silver/Gold are so effing bright, you don't need LED's but I get why some wanna upgrade. $75 for a pair of lights is a little steep.

[@hitlercat7341]

35 USD or less at Amazon

[@chriskruse9844]

I have a issue with my 2008 Ford Crown Victoria P71, I installed new LED headlights and everything works great, wires are good, good switch, good fuses, good everything, when turned on, they work Backwards, low is high and high is low, any ideas???? Driving me nuts !!!

[@ivannunez7251]

I would be interested in the custom push bar for my 2000 crown victory LX

[@sillywillie5076]

Right lol, that would be sick to get

[@stevenplaskett7728]

Well your wrong I did the same install on my f250 and u have to cut the retainer rings to clear the cooling fan area. There the same bulb.

[@chrisislas1838]

Rumor has it that the CVPI chasis is made of very strong steel, but is the frame itself 6 inches in height that helps keep the frame stronger oppose to the standard height of 4 inch for civilian models?

[@jvincemusic]

Same frames but the CVPI is reinforced in certain areas...even the civilian models are mostly boxed so not a huge deal.

[@seansimmons5962]

I want to get these but my 2000 LX has amber lenses for the turn signals. I guess I couldn't do this.

[@jonnyhogarty]

I still cant get over why you guys dont box in your cold air intakes lol

[@carolinefox6420]

The box cut airflow to my S2000. Removing the box opened up the engine.

[@imfrom210texas]

@@carolinefox6420 would the Crown Vic engine have the same performance gain?

[@carolinefox6420]

@@imfrom210texas probably. You're engine is less restricted and it wants a lot of air to breathe.

[@imfrom210texas]

@@carolinefox6420 how did you remove it? Like, before the air filter? I know this may sound ridiculous, but explain it to me like I'm 5 lol. I'm really interested in possibly testing this

[@carolinefox6420]

@@imfrom210texas I bought the car from a friend so I didn't know it had a K&N. I took the stock cover off and that was enough to make a difference.

[@Titans2138]

i'd use pliers instead of screwdriver to remove the metal clips on the back of the headlight and i'd unscrew the bulb before trying to disconnect the electrical connections, just me tho

[@troyharrell622]

I'm having my cvpi delivered friday! Do you know where I can get a roof rack and a ride hitch?

[@joshhowardtechchef]

Nice video sir now how in the heck to you aim the head lights straight lol I keep getting mine pointing down smh

[@johnjohn-xo5gl]

josh howard on the back of the headlights there are black pieces of plastic that tighten or loosen so that you can adjust them

[@bstceltics4]

Stark is the brand I bought and I like them but 55w 4500K HIDs are much brighter

[@Smokey420Greenleaf]

bet everyone else on the road hates you too.

[@bstceltics4]

@@Smokey420Greenleaf if adjusted properly they wont be doing Amy more harm then regular bulbs

[@robertshivers3420]

Is there a updated link for these?

[@javaman2883]

I tried some other branded LED headlights, they were brighter, but they didn't control the beam very well, so I got a lot of people flashing their highs at me. I went back to standard bulbs. On these, did people flash their highs at you much?

[@robertlackey9742]

I've had my interceptor for 1 month and had a catastrophic fail. This. CAR still has the fire suppression system intact,minus the fuse. Also have the original key fob no door or trunk key. Anywho, 400 mile drive, 1 mile from home lost all interior power and trans started slipping out,, airbag lights came on ,won't start battery almost dead. Any ideas?

[@Mik35959]

Aren’t we supposed to use 9007? I thought 9006 were low beam only ?

[@robsorgdrager8477]

Well I'm sold. Do they make these for the spot lights? I run a large amp, will these help the flicker from the gem not liking the amperage fluctuations?

[@n.b.p.davenport7066]

They don't work for me because I live next to the Delaware River and it's too foggy every morning too much light reflects back in your face

[@christianvoss7385]

Dear Mr Random. I'm seeking your help. My 2009 Crown Vic slips out of third gear. It SKIPS third gear. The mechanic, a veteran police car mechanic, cannot figure out what's wrong. He's unlinked the computer. No codes. No 'check engine' light comes on. Have you ever encountered anything like this with all the cars you've worked with? I have a bad feeling a mouse got under the dash and chewed something. But But this only happens AFTER the transmission has warmest up. Transmission fluid is PERFECT as he's had it apart several times to check internals and change solenoids. Please help. Other than THIS ONE PROBLEM, this car is perfect. Brand new A/C intercooler installed in front of the radiator.

[@gregvandy8902]

I hope it's not the transmission itself, but it sounds like a tranny failing. Luckily it's not a hard or expensive job if you find a good used transmission and they're not hard to locate. Last one I bought with 80k for $200 and that trans was still strong at 170k when I sold it. I believe you want a 06+ transmission as they made slight changes and improvements, that is, if you need a transmission. A good mechanic in a shop can swap these transmissions in a couple hours. Takes me 3-4 in my garage at home with car on jackstands and is a pain with so little room on my back, but it's easy with a lift and proper equipment. Please let me know how it turns out for you. I hope you got it fixed!

[@GrandmaKeith]

This must've taken place before the push bumper swap

[@lukesilva6062]

Mr random I’m such a huge fan, I have no idea how to adjust my crown Vic headlights is there any way you can make a video for that?

[@MrRandomReviews]

i sure will and thank you for watching my vids👊👊🙏

[@lukesilva6062]

Mr Random Reviews thank you so much. You’re literally my favorite KZbinr. I’m all about my crown Vic. Just ordered a partition and headlights and the stark led bulbs and I’m watching your videos to install them all but now that they are in I can’t adjust them! Hah. But thank you so much and I look forward to the video!

[@MrRandomReviews]

awesome brother welcome to the family

[@jakesonewheeladventures.3976]

Why does the ebay site you linked not exist??? Or they don’t have any

[@dwoodrow9721]

I think I’m gonna order a set next week

[@Kauffman578]

No longer available. What are other led compatible?

[@radioman2602]

Can we get a link to LVCP, can't find him.

[@crazycreed6675]

We're the link so I can buy one?

[@duckedofftreyshiesty]

what’s the name of that push bar?

[@noahwilliams1600]

Do you also use an LED for the turn signal?

[@electrocadillac1158]

HELP! My headlights don't unbolt like yours did.... Don't know what to do....

[@lawrenceanderson6167]

I hate the LED lights. They are so bright it blinds me. I have seen cops also stop people for lights being to bright. Check your states VTL for allowed lumens.

[@bensgarage8325]

Do you drive with a mirror infront of your car? lol

[@imayhaveadhd]

Easy fix. Dont drive anymore.

[@harysuper]

Lawrence Anderson I installed auxbeam golds. Better LED headlights have glair shields, and the CVPI has glair shields in the housing. The CHP hasn’t pulled me over for running them, and it’s been over a year. My crappy BBODY assemblies don’t even have shields.

[@PeRRXX]

Have one driving with dim ass bulbs then my guy.

[@NGGPeter]

8:52 Were those the high beams? It looks like the high beams are barely any different than the low beams. Is this because they are incorrectly aimed too far down? You should post some pictures/videos after they are properly aimed. Also, how sure are you that this isn't blinding oncoming traffic? You should also have a friend in another car come your direction on the road and see if it blinds him (after they are aimed).

[@MrRandomReviews]

yes i said that the headlights were pointed down

[@c4_yrslf726]

Bought two vics and both have the headlights so low the high beams look like normal headlights gonna adjust them surely this week and might get this upgrade

[@patriot9455]

My Crown Vic will be back on the road soon, I will be doing some of the performance mods to get increased fuel milage and maaayybbeee for a few extra MPH in an emergency.

[@Smokey420Greenleaf]

good story... but what does it have to do with the video?

[@patriot9455]

@@Smokey420Greenleaf Thank you for commenting. It has nothing to do with the video, but I enjoy Mr. Random Reviews.

[@AW-cu5vr]

Where to I get that brush guard?

[@tylerzeile9679]

Do the LED get brighter when the high beam is activated or no?

[@danielzamarripa8525]

Anyone have a link to the light? And do we need to buy the regulator?

[@notawesomebread]

if it counts, my crown vic was stolen and then it came back with led headlights...

[@dannygallagher9290]

Do you worry about blinding other drivers?

[@venomxgt5666]

Your awesome mr random

[@davidm.mcdade7979]

your head was moving to much,

[@kwamelewis6488]

I was 16 when I got my first crown Vic and nobody was really is it but a lot of people and DC in Maryland back then was buying the crown Vic the most it just seems like now everybody's hopping on the crown Vic wagging I figured I better get one before they all gone because it ain't many left and

[@bigdaddypancakes7074]

would it fit on my 1998 grand Marquis

[@redneckhillbillyjr2547]

Bro i want ur brush guard

[@alexaviersouthall6404]

Will the same headlights work on an o8 grand marquis

[@stevewrobel7001]

I don't see why not!!!!

[@rellbgm4473]

Why put a cold air intake in your vic?

[@Viking_6_3]

I want those for my squad. Wonder if the dept will pay for them. 🤔

[@notshort9796]

Just don't get led blinkers they suck unless there's a relay to make them brighter

[@russg1999]

Are they illegal af?

[@skrip2143]

Do these work for 05 grand marquis as well?

[@MrRandomReviews]

yes

[@wantsanewvehicle]

I'll pass, thanks. Last time (4 months ago?) I tried led headlights in my cv I couldn't get anywhere near the output (the beam pattern was complete shit) I was hoping for. Tbh it seems as though yours isn't much better. Aftermarket led headlight bulbs just aren't there yet. I only drove my car 700 miles last year lol.. and I'm wishing somebody would just rear end me already and total it. I'm not willing to spend any money on it other than what it needs, even if it's only ~$40.

[@Splenectomy0]

Do you still have it? If it doesn't have issues I'll gladly take it.

[@anthonygary6246]

What's the model for the stark hid kit for the crown vic

[@TheRealBobbyMC]

Dunno if you found your answer, but wanted to post this for future readers. The Starks are listed on Amazon, but only on one listing with a million different options all with the same description. The simplest thing to do is go on Amazon and search for "9007 LED". There are a number of different brands that offer seemingly equal high quality variants of this same kit, but oddly none of the results that come up are Stark. It's possible the company folded/rebranded and stock has dwindled? Regardless, 9007 is the distinction that is important, so just search by that.

[@michelleswitzer1944]

Fckn great. Nice helper !!

[@landonpoindexter114]

Y’all get some Auxito LEDs

[@whatever9907]

Sorry sorry I know I know it's old video but guys I really need to know which one should I use for my vic the 35w or 55w!! Someone told me 55w is too much and may suck the battery 🤷‍♂️

[@americanbreed5116]

35w just about as bright as 55w,plus u less likely to get pulled over when set right..

[@timothyfay1209]

It's great for you the driver, not for the other cars coming towards you, blinding them are you not?