17IPS72 Repair

[@wisher21uk]

Had a tv once a 55” toshiba that was mounted in a kitchen it took hours to clean the grease and oil off of the whole tv, it was gross .... Nice fix Reece keep em coming

[@MrReeceyburger123]

Haha that’s bad, I’ve had a few where I’ve washed my hands straight after they are that bad 😭 I shall try keep it up mate cheers 🤟

[@budstvmix2634]

nice master and thank you for video sharing..watching and support to your vlogging and keep safe..

[@MrReeceyburger123]

Thank you ☺️

[@lozmarks]

Hi Reece - it would be great to see a troubleshooting/guide on your steps and processes on how you find faults, where you look and how you test different things. I've always had difficulty making a start and knowing where to go first. Just a recommendation for future content 👍🙏

[@MrReeceyburger123]

I need to improve on the videos a lot, I need to invest in a camera stand that’s literally it and I can do a bit more in the videos.

[@MrReeceyburger123]

It’s as I explain in the videos though. I have this to fix this is what I found evident to me and this is what fixed it. It takes years of experience and I’ve fixed a lot of devices, one day you will just sort of know what’s going on straight away and make good educated guesses.

[@linusgk5042]

Got here because my TV shat the bed. Those caps that blew for you are a lot bigger om my board. Mine are 100v 100uf lying horizontal on the board.

[@MrReeceyburger123]

Ahh cool vestel just put whatever they have in there

[@Arnie_Liv]

there is a revision of this without Q1 MOSFET works perfectly in a 49 inch I picked up, the 2 caps are done in the old board but that MOSFET controller has toasted itself as well

[@reacey]

never seen those caps die . Nice easy one

[@MrReeceyburger123]

I’ve seen a few led TVs with bad caps now, brands like cheng and other crap ones.

[@reacey]

Just done a 50 inch panasonic with an ips17s..same 2 caps( 92 micro farad) bulged..one of them was completely open. Replaced them and off it went ..couldnt find any other issues

[@reacey]

​@@MrReeceyburger123forgot to mention the tv was only 3 years old. Maybe they had a bad batch of these 92 micro farads? Or like you say theyre pushing them to thier max

[@reacey]

​@@MrReeceyburger123ive just had a thought, these tvs have those backlight strip connectors that go bad and have high resistence , i must have fixed 20 of them..i wonder if these 2 issues are related, eg high resistence connections in the backlights is causing excess current draw through those caps . Id have stripped this tv down to check the connectors to confirm it but my backs gone atm 😅. Just a thought though.

[@FndoDnz]

Great video thanks ! i have exactly the same capacitor bulged up 🤦‍♂ it's a 92µF 100V can i replace it by a 100µF 100V ?? or it must be the same value ??? Please help meee !! Thanks

[@bobsoft]

Agree on the surface mount caps being unreliable. I see that in many you tube videos from (Norcal715) I just replaced the caps in my wife's car alarm. Every component (control module, shock sensor, remote transmitter) had bad surface mounts. I have the same ESR meter (ESR-70 Plus) as you. Wonder if I may need to replace the caps inside of it one day soon, lol. Its getting close to 10 years old.

[@MrReeceyburger123]

Yeah I’ve changed so many of these, weird as they can be completely open and the circuits will still operate somehow most the time. It’s only because I test them that I know they are faulty, bad idea testing them haha 😭

[@MrReeceyburger123]

I think the peak is all ceramic based, I don’t for sure. They are a brilliant company and will probably still be offering support in 10 years 🤟

[@bobsoft]

@@MrReeceyburger123 The version I have has 3 surface mount. Mine uses that A23 battery.

[@StefanosBand]

I have a totally dead PS the same model. No power led or standby led. What you suggest? We had some power line thunder surge, and one more question please. Can a bad HDMI connection cause a totally dead PS? Thanks in advance .

[@atakandundar1757]

Brother, what was the problem? The same capacitor you marked is swollen on me too. The TV turns on, it says Vestel, the screen goes dark. There is no energy going to the LEDs. What was the problem? Are you a writer? I use translation

[@paulhotson5820]

Toshiba with same supply had lines appear on screen,did a factory reset now lose of picture after an hour but have sound. Any ideas thanks.

[@Rodrigo-ks6oc]

Does.. reducing the backlight lower the strain on the PSU? Got a Vestel set with Android TV a few days ago (after previous.. frustrations with LG and WebOS).. and i decided to lower the backlight.. to 35. just curious tho, about what can i do to make it last longer

[@Rodrigo-ks6oc]

Update : forget it.. the TV died, it doesn’t even go into standby

[@k.w9249]

Same board is in my Panasonic Branded LCD tv.

[@MrReeceyburger123]

Hey guess what, you have a vestel 😜

[@joeblack9959]

What is the right cap to replace those you replaced? I have 2 that have popped on my board

[@MrReeceyburger123]

10uf 50v will be ok pal or 1uf or 2.2

[@luisleca8093]

I have a Toshiba TV with the same boards as this TV. It turns on, the Toshiba logo appears, then turns off. the LEDs are fine. What can it be ?

[@reacey]

Shine a torch at the screen and see if the logo is still there after the backlights turn off.

[@reacey]

Picking up a 43 inch 4k lg with 3 red standby led flashes, hoping to god its the backlights and not the main or panel lol (not familiar with this fault , i was thinking main board but google says possible backlights so im gambling

[@MrReeceyburger123]

Probably backlight sounds like it’s booting up.