No video

MS441 gets Carb limiters removed

  Рет қаралды 6,443

Novice Lumberjack

Novice Lumberjack

Жыл бұрын

Пікірлер: 59
@jonbobskunkworks
@jonbobskunkworks Жыл бұрын
Love some pawn shop finds. Around here about all I ever see are home owner 45cc stuff. Great job man!
@jjm3254
@jjm3254 Жыл бұрын
Same here. They said they sold larger ones on ebay.
@christophercollins3460
@christophercollins3460 Жыл бұрын
I've been watching you bring more and more Stihl saws to the show. I'm beginning to think that you secretly like Stihl Chainsaws 😉
@tomr2007
@tomr2007 Жыл бұрын
Stihl provides great service manuals that explain everything in detail. Sometimes reading the instructions can save time and frustration.
@lumbearjack1439
@lumbearjack1439 Жыл бұрын
Honestly at first I hated working on stihls but I’ve been running an 066 and a 461 all year and after getting used to how these 2 saws go together I find them easer to work on than huskies…except the impulse line. Damn those impulses. This stihl looks god awful compared 😂
@kingsaws
@kingsaws Жыл бұрын
I would agree , I can't hardly stand working on a stihl
@Johnnyreengo
@Johnnyreengo Жыл бұрын
Mannn look at all those fines behind the filter 😬
@idratherbflyingthesaucer6270
@idratherbflyingthesaucer6270 Жыл бұрын
Meee tooo and I have to do it more often than any saw I've ever owned. The normal maintenance on this thing is ridiculous to keep it running optimum. Thanks for time my friend.
@thadstuart8544
@thadstuart8544 9 ай бұрын
For reselling these, you can dress it up easily. Remove the bar and spray gasket remover on it and let it sit for a couple hours. All that old bar paint will come right off (i use a small brush to easily scrub it off). I then put oil on bar to preserve it. Those old metal clutch covers can be painted with Rustoleum's Farm and Implement aerosol paint, in Ford Gray. Its more of a tanish gray and matches Stihl color great. Those 2 easy improvements make the saw look much cleaner. Just fyi friend
@CharlesWinters-ie3jy
@CharlesWinters-ie3jy 6 ай бұрын
There is supposed to be to be a bolt that comes thru the filter with a wing nut to hold it on.
@timothybyrom5560
@timothybyrom5560 Жыл бұрын
Not difficult, just different, a little complex sometimes, but when you get to know the ins,and outs, not too bad.As far as sitting down. What are you supposed to do when you're half asleep, piss all over the bathroom? Mama be mad,you do that. Just sit down, and relax. Take a little nap.
@Revellersaws
@Revellersaws Жыл бұрын
Once worked on a Stihl for a whole month one afternoon
@DaveyBlue32
@DaveyBlue32 Жыл бұрын
If you unscrew the screw’s you don’t have to try and yank it up!!!! LMFFAO!!!
@anthonyhicks3085
@anthonyhicks3085 7 ай бұрын
How much for the 441 I've got one looks still new but it blew a plug I took an had a guy put a new head on it now it want hit a lick an when it blew the plug it was running likenew new
@woodchuker570
@woodchuker570 Жыл бұрын
You did good on that Body, one just popped up today here on CL for $600 . Looks a little cleaner , not by much.
@aaronpowell4885
@aaronpowell4885 Жыл бұрын
Stihl saws and brush cutters definitely aren't the easiest to work on. You should have no problem making a good profit from that purchase!
@timberslasher4899
@timberslasher4899 Жыл бұрын
You like Stihl bout as much as I do...lol
@stevemcdowell2019
@stevemcdowell2019 Жыл бұрын
I had a 441 and it was the most difficult saw I've ever worked on!
@darrellpeak2914
@darrellpeak2914 Жыл бұрын
Aughta not leave your shop without a muffler mod, bgd, and port work….
@mattfleming86
@mattfleming86 Жыл бұрын
THATS how you make a buck on a saw.
@DaveyBlue32
@DaveyBlue32 Жыл бұрын
Need a ring of axle grease around the bottom edge of your filter and you won’t get the fines though into your intake! A foot off a pair of Queen size pantyhose with a fat rubber band around the base of the filter is an excellent prefilter! Is it the 441cm or do you have the adjustable carburetor??? 50mm Xtorq design… like a 372xtorqer!!! The piston interchanges with the 372 Xtorq! LMFFAO!!! Don’t run quite a good!!!!
@colindriedger7158
@colindriedger7158 Жыл бұрын
Just took my first MS290 apart. What a pain in the ass. Why Stihl makes everything so overly complicated is beyond me... I will say the 026/MS260 isn't a bad saw to work on though. Just crappy air filter design lol.
@brendanfromnz
@brendanfromnz Жыл бұрын
The reason I believe is simple. They don't want the average Joe Bloggs home mechanic screwing around with their saws at home. They want you to take it to their authorised dealer and pay the trained tech $100 an hour or whatever the going rate is these days to fix it. Once you figure them out and get used to them though, they're not too bad. Not so much difficult, just different.
@yota4004
@yota4004 Жыл бұрын
looks like a ton of dirt gotaround the air filter and is stuck all over the black plastic around the carb inlet. not good.
@darrelljohnson4658
@darrelljohnson4658 Жыл бұрын
Good job sawrus nice 👍
@lukereynolds9907
@lukereynolds9907 Жыл бұрын
Maybe it's the operator and not the switch 🤔 😕
@joshuajohnson4396
@joshuajohnson4396 Жыл бұрын
I like those series of stihl
@justinp7687
@justinp7687 Жыл бұрын
Only thing I dislike about Stihl is having to go to a dealer for parts or pay overpriced on eBay. Worst part is when closest dealer is a ace hardware. 441 are the worst ones I have ever delt with.
@kingsaws
@kingsaws Жыл бұрын
Dude that screw driver have reverse threads on it
@Bearclaw_Jake
@Bearclaw_Jake Жыл бұрын
Funny all the Stihl guys complain about husky and vise versa. I guess it's just ford v Chevy kinda thing. I've always ran Stihl as that's all that's in my area, but I've always wanted to try the husky 372 as I hear it's legendary.
@novicelumberjack
@novicelumberjack Жыл бұрын
When you finally get a chance to run one, keep in mind...there are faster, torquer, lighter, smoother saws. But nothing puts them all together as well as an original edition 372xp. It also responds very very well to modifications and is incredibly reliable. Straight knocked it outta the park with all the "3" series pro saws. Non XTORQ, that is. The XTORQ saws just aren't quite as nice.
@Bearclaw_Jake
@Bearclaw_Jake Жыл бұрын
@@novicelumberjack thanks for the feedback. I'm currently running a 461 stock, pulling a 28" bar for my big saw. I don't have a lot of complaints so far. Have a wonderful thanksgiving brother.
@troy3052
@troy3052 Жыл бұрын
hurry and get that saw ready for db fresh to use
@darrelljohnson4658
@darrelljohnson4658 Жыл бұрын
Funtime sawrus
@Michagan_outdoorsman_James
@Michagan_outdoorsman_James Жыл бұрын
Stihl only the best, F the rest 😁😁😎😎, glws for the 600.00 i u get the lightweight bar and chain?
@cajun3197
@cajun3197 Жыл бұрын
Stihls aggravate me too. Plus they just don’t run as good as a husky
@oldcodger1929
@oldcodger1929 Жыл бұрын
I agree Cajun.
@cajun3197
@cajun3197 Жыл бұрын
@@oldcodger1929 😉
@gsw313
@gsw313 Жыл бұрын
Evidently you know nothing about chainsaws then
@oldcodger1929
@oldcodger1929 Жыл бұрын
@@gsw313 you have a nice day Jerry.
@cajun3197
@cajun3197 Жыл бұрын
@@gsw313 ha. Ok, I’m actually a saw builder 😂😂😂😂
@Doc-Cole_Trickle-of-Chainsaws
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
👍s🆙Big Guy!
@ScrewdriverTUNING
@ScrewdriverTUNING Жыл бұрын
Sthils are to expensive for no reason at all. I’ll take the China one over the real thing everytime. Sthil folks love to say it’s the operator not the machine 😂. That plastic intake piece that holds the filter on, Throw it out. !!
@kylecromp319
@kylecromp319 Жыл бұрын
Bro your such a hater with stihl!!!!!! I can tell you right now i can tear a 044 or 046 down before you take a 372 apart! Lol your something else sometimes. Makes me chuckle.
@jasoncarroll891
@jasoncarroll891 Жыл бұрын
Hey
@lukereynolds9907
@lukereynolds9907 Жыл бұрын
Don't be hating on stihls now boady mate 😝
@Woodysworksaws
@Woodysworksaws Жыл бұрын
MS 441 is the absolute worst Saw to work on.
@Ketis1985
@Ketis1985 11 ай бұрын
you just have not worked on MiniMac yet?
Today on This Old MS441….
10:41
Richard Flagg
Рет қаралды 2,2 М.
Stihl Ms441 failure analysis with Fab Willy!!!
9:20
Tinman's saws
Рет қаралды 8 М.
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 23 МЛН
UNO!
00:18
БРУНО
Рет қаралды 4,2 МЛН
Chainsaw Carburetor Tuning: The Ear Method
14:52
Westcoast Saw
Рет қаралды 116 М.
Stihl metal limiter cap removal
4:08
CJ Saws
Рет қаралды 12 М.
Broken stud! Stihl MS 311 Bar Stud Replacement  Farm Boss #stihl #chainsaw
27:16
#1 Firewood Question | Stihl ms 441 | Tamarack | 🌲 🪓 🪵 🔥 🏔 🍁
37:44
Mountain Life with David & Kelsie
Рет қаралды 22 М.
Stihl 441 after porting and muffler mod. Full length with port discussion.
9:58
Building a HammerHead pipe for Echo 590
23:48
Novice Lumberjack
Рет қаралды 5 М.
Lets Ride The Tractor And Clean A Carb On A 361 Stihl
15:35
Bellhopper mcculloch chainsaws
Рет қаралды 4,4 М.
Stihl MS 441 Anekdota.
31:23
Drujba Inc
Рет қаралды 19 М.
Donny walkers chainsaws explaining Stihl 461 carb
8:13
Donny Walker
Рет қаралды 9 М.
1967 STIHL Chainsaw Restoration | Fully Restore Chainsaw Rotten
21:42
Restoration Repair
Рет қаралды 2 МЛН