MSFS 2024 *Best Graphics Settings* for Mid-High Spec PC | RTX 3060

[@stuartthurstan]

Great to hear from someone who isn't rocking a 7800x3d and rtx4090. Thank you.

[@PCVRandQuest]

I was playing this in vr on my 3060 12gb last night and it looked amazing

[@ArcanePath360]

Looking good on my 3070

[@rannyyfr]

@@PCVRandQuest Do u have anywhere i can contact you for help with setting up vr so it can run smooth?

[@PCVRandQuest]

@rannyyfr it will all depend on your setup. What works for one person isn't always right for another. Start at medium default and slowly increase each setting, one at a time to see the effect, it's all trial and error.

[@rannyyfr]

@@PCVRandQuest okay thanks

[@spooterify]

Really nice to see someone with a mid range PC sharing their setting - so many people rockin a new top of the line X3D processor and the latest 7090RTX with 98GB VRAM LOL ok maybe a bit exaggerated but you get the point :) Nice video, +1 like and sub

[@milanzikmund7273]

I tried MSFS 2024 just this morning for the first time and unlike others, I can't complain. For GA it's seems better than 2020. I've built my computer due to MSFS 2020 and Cyberpunk and it's not upgraded since then. My spec: i9 10900k; RTX3080, 64 GB RAM, optic fibre internet 1 GB/s. Running everything on default Ultra setting, resolution 3840x1200, Vsync ON 50% refresh rate. It's super smooth in compare to 2020. Also the area around my home airstrip LKBE is much better and buildings are improved a lot. But anyway, it will take time to get the sim to the shape. No other sim was awesome on day one...

[@DrHenrik]

the real issue in my eyes is that microsoft has basically made modding impossible by streaming the planes encryptedly. According to inibuilds it would be possible to provide the paintkit but ms specifically decided against that. And to add insult to injury the issues with sudden crashes is according to inibuild cause by the streaming! It is very hard not to see this as an attack on the community

[@BernardLangham]

@@DrHenrik did you notice the "buy more liveries" button on every aircraft when you're browsing through them? mmmhm.

[@DrHenrik]

@@BernardLangham yes ... apparently microsoft wants to find a solution that makes "the community happy". Luckily amazon takes my copy back. Until we get either the inibuild plans local or ports from fenix and pmdg I will stay clear of 2024

[@nathaniel1680]

@@BernardLangham I noticed the rent button, whats that about I wonder ?

[@leijo]

Try doing Default ultra or even high with your set up on 3 screens... :) Im running same set up with my 3080 but on 3 screens. Can't get decent fps even on high.... Running medium with few increases to high and can get around 60fps......

[@jakeromeroful]

Thanks for sharing your experience . It helped me.

[@Azantak-h6l]

Many thanks for this video. I have a Ryzen 5 3600, 64GB RAM, and an RTX 3060 12GB. These settings made the sim GPU dependent. Great visuals with a solid 30 FPS. Thanks again man.

[@captaintull]

I have a 3060 and i7 11th Gen processor and it runs very well on my system … all set on high.. and VR too… couldn’t do that in FS2020

[@denali6935]

It isn’t optimized it doesn’t utilize your graphics card or cpu fully

[@CésarRamírezP-z2h]

yeah, same here i have an i7-10th, 3060, and 32 gb of ram, and goes well

[@Arkid77777]

Really? I have a 1660S and 2020 runs fine on high but is horrible in 2024

[@wout123100]

@@Arkid77777 a 1660 is way way slower than a 3060

[@nikosf3n]

@@Arkid77777 I run a 1660ti and yes it's much slower than 2020, at least 50% less performance and in lower graphic settings so the game isn't well optimized yet.

[@pzsoulman]

This might just be your best video yet. Thank you so much for sharing, I can’t wait to try some of these settings 👍.

[@stevebassett3709]

Thanks for this. Will be a good starting point for my setting hopefully 👍🏻

[@dzurisintube]

I really appreciate all of you work on this. The aspect I'd like to point out is the Dynamic Settings which is an integration of AutoFPS into the core of the sim. It will constantly and dynamically adjust all of your graphics settings to maintain a steady FPS which might well eliminate all of the complexity given the multitude of differences in everyone's personal setups. It's worked well for me and I've had no issues yet. Just something to explore perhaps in a new video.

[@aussiecoffeebean]

You are a genius! Thank you ever so much you helped me get flying again with an RTX3080 laptop! I salute you good Sir!

[@ElZoido83]

Best settings for me so far (5800X3D, RTX3080, 32GB RAM): Ingame graphics settings to "high" preset, change TLOD to 200, offscreen precaching to ultra, dynamic settings set for 30fps and frame generation mod. Super fluid with the quite demanding H145 at VirtualFRA EDDF. Give it a try!

[@aarontt]

Thanks for making this! It's great to see someone with more realistic specs for the average person. I'm running a RTX 3070 Ti with a 5900X - I had to reduce the texture resolution a little, since the 8GB VRAM was struggling with Ultra (seems like the 12GB of your 3060 really makes a difference), but other than that, the settings you showed at the end are perfect for me. I'm seeing around 30FPS while on the ground at EGLL (in FS2020 I struggled to see above 15/20FPS here!) and a steady 45-50FPS while in the air.

[@Tlg737]

I am running on almost exactly the same C as you are. I am using the settings you mentioned and the sim is running perfect. I have never had problems with 2020 or 2024.

[@matiassilvennoinen3921]

Let's be realistic here. The only major problem with 2024 was the launch with the overrun servers. Everything else is far beyond what 2020 was when it launched. This is going to be pretty amazing.

[@imgroot7035]

Not entirely true. Apart from the release, the main problem is the lack of the ability to download planes. This is very important because it has a huge impact on fps.

[@terblanchejordaan3822]

The more I look at video's from MS2024, the happier I am that I haven't bought or (tried) to install it yet. At the moment my MS2020 is running butter-smooth and I am in no rush to downgrade to something that will stutter my joy. Let's wait until you can download aircraft and scenery to your PC, or at least after the second or third SU for 2024.

[@Nikthetrip]

i tried in every way to make 2024 perform and look as 2020 but in the end i had to wave white flag and back to 2020. no regrets as 2020 is also looking better (apart from lights and atmos) imho

[@lupo_aim]

I have bought it, the Alpha experience, performance and graphics was great, i got hyped even more! Its such a surprise it went completely downhill in just a few weeks... horrible performance, graphics it just doesnt work as it should... Im enjoying my FENIX on ULTRA on about 60FPS (no Framegen or DLSS) in 3440x1440.

[@Redtail_Pilot]

@terblanchejordaan3822 My thoughts exactly, except this dummy opened the box (pre-ordered Prem/Deluxe), prior to watching several reviews. BestBuy refuses to grant refunds on open box software (can't really blame them), although I never installed it. Looks like I'm stuck with this mess. 😬 I'll wait awhile, since 2020 runs great and I spend the majority of my free time in DCS anyway. As someone who's owned every version since I was a teen, in the mid 80's, when it was SubLogic (it inspired me to get my PPL). I'm hyped to see every update to the genre, but disappointed in some of the choices they've made, at the same time!

[@AUM_3000]

I appreciate this video. very good effort and information. I use the RTX 3060ti and I hope I can fly my aircraft with a beautiful graphics. I am waiting to have my MSFS 2024 fully ready to work on my 4 years old pc. in fact your video give me a hope to run the sim more realistic without having t spend a lot of money.. again, it's a wonderful video. Thank you

[@TheGreatLordDufus]

So, the take away is this flight simulator is now fine - so long as you don't use an aircraft?

[@casaamaril]

😂 Good one

[@thedakotahurley]

Been saying this for years. Asobo made a world simulator. The flight part is an afterthought

[@LunnarisLP]

Ive been playing and having fun with the career. Currently still playing with my old RTX 2060. As a used system my PC would probably snatch like 300-400 bucks. Game actually is as stable as 2020 for me and i get good fps. Sure my settings are toned down quiet a bit and the streaming issues make things worse, but yeah still fun still playable. I have already setup a new PC with all those cyber deals we already had. Maybe should have been patient until actual cybermonday or black friday, but ngl the RX 8800 for 450€ was a good enough deal for me lol

[@CaptainJetSalt]

Thank you! Super helpful video. Highly appreciated.

[@barthvapour]

Really useful video, thanks! My system is comparable to yours, but so far everyone has been trying to show off how it runs on a 4090 GPU. At last something representative of an average powered PC.

[@nomadman_84]

Yeah this just proves to me I need to hold off for a few weeks/months and see if they improve it. I only fly airliners with real traffic (batc) and if I want good weather/traffic details...yeah, I think Asobo was not entirely truthful with their requirements. I have an rtx 3070 and already need to use lossless scaling in 2020 just to get acceptable smoothness/fps.

[@Skippypal]

Exactly the same situation as you; it’s just not worth the headache right now. I get that Asobo really limits how much you need to download locally, but streaming every single texture, including planes, was not the right solution.

[@JeffEngle_rvbuiltfortwo]

I look forward to a new review after everything settles down. Thanks for sharing!

[@Sonny-gf2dq]

Good video. Thank you for sharing.

[@renard8137]

1080Ti here. Runs good with your settings and fast internet which is key indeed.

[@joelb79]

Thank you for this. Getting 45fps avg with a Radeon 6600 and these settings. smooth gameplay too.

[@96rc90]

Those settings work a treat thanks gav

[@DanFrederiksen]

Your overhead clip of manhattan 0:20, notice the post apocalyptic mudscape roads. That was a problem in 2020 as well, not sure what they are doing. Also notice the excess amount of trees compared to real world. the textures on the buildings also lookstrangely muddy/dirty. Also what resolution were you capturing at? it seems very fuzzy, maybe it's just the low bandwidth of youtube 1080p, it's just bad. there is badness everywhere :) the shadows are fuzzy too... it's just ick. maybe upscale to 4k for youtube to force it to use more bandwidth but I think the game is doing a lot of fuzz too

[@nimislaknumis4615]

it's probably a bing photogrammetry thing, if it was google or apple it would've looked completely different

[@kkplays2016]

Love this video! What CPU are you running?

[@casaamaril]

Very helpful information, thank you

[@Gav_Jam]

just brilliant thank you

[@richardkduncan3928]

Great presentation. Thanks

[@TheAngmarwitch]

well i'm glad someones getting in and playing it, 3 days after launch and im still getting the hanging at 97%. Havent even seen the main menu yet

[@otal0721]

Restart

[@ESPirits87]

That's weird, 8 hours after launch i got in and it has worked ever since /Sweden

[@XsTwentyOne]

Thank you for this informational video

[@bigdad4967]

Knew this video had to be coming… thank you

[@Hsa-f5m]

No one makes a settings video for older cards but your card is maybe the lowest ive seen from these kind of videos and I appreciate that.

[@chriswright5016]

Thanks Gavin. A really excellent overview of some key graphical points here. I have to say that, overall, I'm very encouraged by the general smoothness of the sim. There are bound to be a ton of graphic optimisations in the coming months, so this strikes me as a pretty decent start. Of course right now most of us are running the sim in a fairly vanilla fashion in terms of add-ons and I still have a nagging concern that the streaming of scenery could be a real hindrance when we start adding the likes of Fenix and PMDG planes. One would hope/expect that Microsoft will be able to improve the streaming performance significantly from where it currently is at. Still lots of questions to be answered, but we do seem to have come a long way in, what?, three or four days. Thanks again.

[@fergie41]

Very helpful as ever - please could you confirm what your internet download speed was whilst recording this video ? Many thanks. Richard

[@Easyjetsimpilot]

It was about 20-30mb/s

[@clarkeosborne2611]

Played 2020 this afternoon and happy days. Dc Designs have a update for concorde.. Definitely looking better to me. Can you do a video on your thoughts.??.

[@otohikoamv]

Thank you for the observations! Honestly, the strange thing to me is that relatively few settings seem to make much difference for me in terms of frame rate - it's one of the first games I've encountered where levels of detail seem to matter fairly little. My GPU is almost always running near 100% regardless, and unless I do something drastic like turn off the clouds, it's always somewhere in the high 20s - low 30s. If I throw in frame generation over it, it's certainly very playable, if a bit underwhelming compared to FS2020 (where I could count on a steady 45 fps or so). The really big difference seems to be in how efficiently it can load that detail - if I put off-screen caching and texture quality to high, my visuals quickly turn into a blurry mess (unless I stay in the same place and let it load). The textures do gradually load in, but it takes a long time and whenever I move, the blurries reappear. It's even worse with streamed aircraft - if I stay in external view for a bit and go back to the cockpit, it has to reload the entire thing and it can take a couple of minutes. I thought it might be a network bandwidth issue, but no - it barely uses over 12 mbps on average (a small % of my available connection) in non-photogrammetry areas, and it actually seems to be worse there than in photogrammetry cities. Easy fix for me there has just been to turn off the off-screen precaching, and (especially) turn the texture quality down to medium. It's less sharp than at high or ultra, but it loads instantly. I have a sense that something is very oddly optimized there at the moment and will get better. It's very strange how indifferent to levels of detail or density of traffic this sim is - certainly nothing like previous titles! That may suggest that things like traffic are now less of a problem thanks to proper multicore optimization on the CPU, but it doesn't quite explain why the frame rate won't budge even with major changes in level of detail.

[@OltcitRoom]

I noticed that too, the larger aircraft’s do kill 10 to 15 FPS .

[@EverythingVideos-u3z]

I have a 3060ti and MSFS 2020 does good on Ultra but MSFS 2024 still needs some perfomance improvements.

[@michaelfrye7792]

You are aware that you can add aircraft to the community folder for MSFS 2024 juat as in 2020 aren't you? Then the aircraft loads from your drive. Also I noticed you were not using the dynamic setting which works like Smooth Flight, or Auto FPS, although in my testing it doesn't work as well as either of those addons did in MSFS 2020, but it does make a difference in FPS. Also for users of 30 series Nvidia cards you can gain massive frame rate improvements by using the frame gen mod which allows you to use frame gen on 30 and 20 series cards. Another way to gain frames is to upgrade the dlss and dlssg .dll to the latest versions, along with some setting changes using Nvidia profile inspector or DLSS TWeaks to chose which quality of dlss you perfer, for example you can make all of the dlss settings render at dlaa quality.

[@BC21084]

Use the dynamic settings it will adjust settings to maintain the target frames

[@noelrojas9952]

Thanks for the video,.usefull 🙏

[@lukawylie3755]

Rx Vega 64’s are not supported but 1050ti’s are is crazy.

[@MrHaaspaul]

What gets me is the cut scenes at the beginning when you start the sim 2024 the graphics are so RICH AND COLORFUL ! But then when you get into the sim and fly around the graphic colors are WEAK AND PALE almost WASHED OUT !

[@skadvani]

Have you tried looseless scaling. It helps a lot

[@maxspronk]

Can i also run msfs 24 with a 2070 super with good fps and visuals?

[@Kingsim87]

great. thanks. i now need a experts help. i have several airports i dont see the terminals, i just see gates :( ?

[@rogerhays6857]

Where do you get that on screen data from? The one in development mode is just a gray box with very little info. Thanks

[@Easyjetsimpilot]

The top dev mode menu bar, once activated - select debugging and show FPS

[@GL-777]

How did you solve the blurry scenery?

[@OrganAviator]

The servers have improved

[@chrisgard4076]

how did you get the framerate counter to show ??

[@alanwright4575]

Go to settings. Turn on developer mode. At top go along menus and in one of them it says show fps.

[@cyberbol]

How do you start Developer mode? I can't. Button is greyed and cant turn it on

[@Dougie2945c]

Thank you for this video Other than having the 3060ti installed i have the same specs

[@sascenturion]

Interesting stuff 😮 .. Would be ideal to have the aircraft on our pc's it seems Thanks

[@TheNordicVoyager]

My specs are i7 8700k with RTX 2080. It runs surprisingly well on medium to high settings (clouds and pre-caching set to ultra) on WQHD. However, this is close to the recommended specs for this resolution. It appears that almost everyone is on 7800 X3d or intel 14xxx with RTX 4090 nowadays. I'm waiting for the new gfx cards generation to hit the market, but I think until then I'm doing fine with GA VFR flying.

[@BKGBlueface]

Can you doing a settings video for people with the TCA Airbus Cap Pack?

[@Easyjetsimpilot]

The sim recognised my TCA Captains Pack automatically and everything was bound by default.

[@soscotty6600]

​@@Easyjetsimpilotsame but struggling to set up for 737 max

[@johanneslandlerjanning]

Thanks for the amazing guide... And with Nvidia AMD mod on top it's very smooth... 😊

[@markmalloy3438]

What are the recommended specs for this simulator?

[@oldhaws8009]

I'm currently enjoying the graphics in VR but I'm seeing a black outline around the planes in VR, would you know what in the settings causes this? (I'm using a pico4 streaming wirelessly on virtual desktop using an RTX 4070ti)

[@rodrigoreyesc75]

Thanks

[@GatisKaulinsh]

I have problems with ground/trees not buildings. The lower you go the more stuttering starts.

[@clutcher96]

i have a 7800x3d and 4070 super and still cant find my best settings

[@jlang66]

I have an rtx 3080. What would you bump up with that card?

[@leravis]

will do equally as good with a 3050?

[@TheSound0fLegends]

How did you bring up the FPS measuring tools?

[@laurieweston54]

Settings/Advanced Options/Developer Mode.

[@sb705207a]

Hi Easyjetsimpilot - my new MSFS 2024 just won't find my Thrustmaster Boeing yoke/throttle; defaults to mouse / keyboard only. Downloaded latest drivers for Thrustmaster but still no joy. PC brand new, windows 10 premium deluxe. Any suggestions please. Steve

[@randysaad5236]

Hi In fs 2024 with both thrust. Airbus and boeing throttle quad, engine 2 at toga goes up and drops to idle. Any thoughts? Prob repeats in all 2024 airliners

[@frankielai2034]

Hello Gav, appreciate your help in advance - may I ask what is the memory size of your RTX 3060? I am asking this because I have almost the same spec as your PC, except I only have 16GB RAM but with RTX 4060 (8GB). It's basically a stutter show when I fly Fenix in MSFS2024 but I want to make sure that the bottleneck is with my RAM, not my display card having insufficient VRAM, when using your settings. Thanks a lot!

[@EthanolEnthusiast]

I've never seen higher than 11.5gb vram usage on ultra textures, 3440 x 1440

[@johnhowarth6156]

Hi Gavin could you make a video on how to setup your tca captains pack many thanks

[@rowhen1071]

Hi I have a 3070 do you think I could change it a bit more? Or just stay the same as you recommend

[@TomBombadiddle]

Somewhere in the comments I found "WEAK AND PALE almost WASHED OUT" and that describes my experience so far. MSFS2020 just looks better atm. I tried to adjust the graphics in Nvidia with the Ansel filter plugin, but currently I can't change any of all the filters displayed in the Nvidia app. Editable is only one (RTX Dynamic Vibrance), but there should be 20+ available too.

[@rossjackson3670]

Thank you

[@leetyas8839]

What's the program called to see your FPS?

[@Easyjetsimpilot]

You can see them in the sim, by turning on developer mode then goto the debug menu (I think) and show FPS.

[@royalsimulations977]

I have the same issue with the airliners. If I am in a Cessna or any small plane, I get almost 80FPS, but the second I go to a big airport with an airliner, it drops to 15-20 and I just can't do it. I will be patient and wait for them to work the kinks out.

[@antoniomaruge8218]

That’s because the airliners are the most resource intensive things on the sim( the more complexed, the more resources) followed by the airports and weather conditions.

[@royalsimulations977]

@@antoniomaruge8218 Oh I understand. Just hate how I could get 100FPS on High with 2020 and get 15 in 24

[@erichschneider4759]

I got RTX4050 32GB DD4 Ram 13thGen I5 CPU and Samsung 990Pro SSD which graphics should I run ?

[@ParZIVal19D]

How did you get into developers mode on 2024?

[@Easyjetsimpilot]

There is an option in the settings.

[@hugarhughes4551]

Hi can you do a video on the control setting up. Airplanes and helicopters thanks

[@dib669]

Thanks for this. Just tried tweaking my settings informed by your video but MS decided to update the sim before I could try them which has so far resulted in 3 CTD. Looks like some liveries don’t work anymore. I’ll have yet another go…

[@jayteeaitch]

I have the 3060/1080 as well - I noticed that you don't use the N Vidia ap settings - DLSS etc. - I haven't got into my 2024 settings yet - but the NVidia ones improved my 2020 quite a bit at the NV chosen standard quality etc.

[@Easyjetsimpilot]

I find DLSS makes text rather blurry.

[@BernardLangham]

@@Easyjetsimpilot it's AI upscaling the entire image from a lower resolution, so text in particular will look pretty horrid.

[@jayteeaitch]

@@Easyjetsimpilot Just a question - you would be aware of Microsoft's error in that they keep reverting DLSS back to a Sept 22 file - and have you the latest DLSS file? - as I said - with the same setup - I see no blurring of the instruments - or anything else on MY 1080 50" TV monitor

[@S1mL1fe]

I can’t believe a game of this caliber doesn’t offer FSR3 with 2025 a month away. It would dramatically improve FPS and graphics. Even if they offered FSR1, it would help

[@glennd38]

It will come later but if you want frame gen mod FSR3 -> DLSS3 is still here

[@fbkhighlights]

Why doesn’t you use nvidia dlss? Isn’t it better?

[@roykela]

This is a very weird one for me. Been spawning in at LFPG, EGAC, ESSA. Playing around with the settings. Specs AMD 9 7900X, 32GB RAM, GeForce RTX 3070. MSFS 2020 is very smooth. MSFS 2024 however is a different story. I can't use TAA. That kills the FPS. At the moment it's DLSS or nothing at all. I can start the game up and get 80-90 fps at EGAC. Even with the Fenix. As soon as i start doing something or start moving with the A/C, camera, go back to settings etc, it plummets to 5-20 fps. If i'm lucky the game locks itself to 30fps for some reason. The only fps lock i have, at the moment, is a ridiculous 1000fps in Nvidia Control Panel. Reinstalled the game several times but nothing seems to help. And it can happen after a few seconds and it can happen after 10 minutes.....as long as i don't change the camera too often. Internet connection is between 100Mbit/s - 150 Mbit/s Any pointers would be gladly accepted because i'm utterly confused about the whole situation.

[@scottb9628]

I have a 10700k and a 3060. It's not going well for me... ground moves in tiles at times. I have frame generator and dlss dlls too. I have target of.30 fps in the sim. I see you don't have that set, wonder why?

[@firing_pin9971]

How is a 3060 "mid-high"?

[@mdhazeldine]

Surely the dynamic settings have to be playing a part here too? They work like the old Auto FPS app. Have you experimented with turning them on/off? Also, what makes you so sure that streaming is affecting FPS? I can believe it would affect texture quality and perhaps mesh LOD/density, but it's highly possible it doesn't affect frame rates that much.

[@Easyjetsimpilot]

If you recall on day 1 when the servers were overloaded, it was often like a slideshow. Very poor performance and low fps. As days have gone on, the load on the servers has decreased and performance has increased.

[@mdhazeldine]

@@Easyjetsimpilot ok that's interesting. I have not purchased the sim yet. Just waiting for the dust to settle a bit first.

[@jcbatol]

Hi great videos very helpful, can you also make videos with key bindings with tca airbus quadrants and other controller settings thank you

[@ClinchRiverHomestead]

At 8:28 you say these settings control density rather than quality . However if you look at the description on the right it's literally the fourth word

[@Easyjetsimpilot]

I believe they actually control both, from my testing.

[@pilotpawanc]

Do settings matter when everything is dependent on cloud and the capacity of servers?

[@Easyjetsimpilot]

Definitely - as you're changing what textures you're streaming.

[@successfullandingstudios]

How do you get the free camera setting to get this live shot?

[@Easyjetsimpilot]

This is the drone camera view (in MSFS 2020 keybinding, it was the INSERT key)

[@Aviation0098]

How do you get the static AI traffic off??? I’ve been searching for it and I think I’m just too stupid to find it

[@Easyjetsimpilot]

I think it's something like airport traffic and air traffic in the settings.

[@randyflies]

Thank you, Gavin! Have you tried the frame gen mod in FS24? It works, installation is the same as in FS20. Give it a try!

[@ayze2341]

Hey man. I thought having the same graphic settings like in msfs 2020 would still improve the fps in 2024. But I am getting way worse FPS. Is that a issue in the system and will improve in the future updates? Or is it supposed to be like this.

[@Easyjetsimpilot]

It's probably like every new sim, they've upped the ante in what the sim can deliver - but you need the most powerful PCs to access it.

[@DrHenrik]

@@Easyjetsimpilot yeah it can deliver everything apart from a local model of the plane ... which is why we still have no mods of the inibuild planes. Honestly thats the real issue for me according to inibuild they could provide the paint kit but ms specifically decided against it for the moment ...

[@markus_olsson4077]

Whats your internet speed out of interest?

[@Easyjetsimpilot]

20-30mb/s

[@markus_olsson4077]

@Easyjetsimpilot thank you, mine is similar but find it still struggles to load scenery, and objects etc, feel like those with standard Internet will really struggle. I live in the countryside so fast fibre isn't an option yet, feels like my only way is to get a starlink and pay £75 a month for it. Which seems unfair when 2020 was streamed fine.

[@Xonarous]

Any tips on which settings i should use? NVIDIA GeForce RTX™ 3070, AMD EPYC™ 7543P from 2.8 to 3.7GHz 8 vCores, 32GB ram

[@infinite7633]

So If I wanna play on 1080p 30 fps, I would prob do 1080p ALL MID-high + DLSS while utilizing motion blur to get rid of the low frame feeling

[@huffy1989]

I have found that Frame gen mod works in 2024, I used this with DLSS swapper and get 70 ish frames with my 3070ti

[@benhuot6852]

Great video, well explain and tanks for doing so. I bought a pretty powerful rig (7950X3D, 7900XTX, 64 ram CL30-6000mhz, 3X M.2 4TB each) 2 months ago especially for MSFS 2024, and I am still afraid to buy it :-)

[@caribbaviator7058]

I have a 5800X3D and 4080 super. So far so good. Not sure about AMD gpus.

[@xhector]

the same old problem since fs2014 and then fsx... the cockpit view and low fps. :D

[@moodscapes]

You can run DLSS frame gen on 3060 with the latest DLSS 3.8.10. There's a video by IslandSimPilot explaining how to install, it's very simple. I did some tests today trying to accommodate every possible bad scenario - super clouds, moving fast next to hi density geometry, heavy airports, photogrammetry etc. I'm getting a minimum 40-45fps low level flight, 55-60fps 200feet and above, with Terrain LOD 200 and everything on Ultra, texture filtering 16x - in 1440. GPU is also capped at 62C/120W in afterburner.

[@nouraiz1990]

But frame gen mod causes screen flickering

[@Easyjetsimpilot]

I find frame gen to make textures, particularly text, rather blurry.

[@Easyjetsimpilot]

My main isdues with DLSS is text becomes rather blurry.

[@moodscapes]

@@Easyjetsimpilot Yes, it blurs moving text but in combination with DLDSR (upscaling and downscaling), dials/text can look really sharp.

[@moodscapes]

@@nouraiz1990 There is some screen tearing with all types of frame gen. The most recent DLSS 3.8.10 is much better in this regard. Still some tearing is still present in fast moving pixel areas such as screen extremities. It depends how much you're prepared to tolerate. Given the framerate and sharpness advantages (DLSS + DLDSR) it's worth experimenting with if you're on a lowish end card.