MSFS | PMDG 737 Tutorial Episode 1: Cold & Dark to Engine Start - including Route Input!

[@BritishAvgeek]

Hi everyone! If you want to download the checklist I've created for free as well for when this amazing PMDG 737-700 releases then head to the website britishavgeek.com/pmdg-737

[@kevintran6487]

Honestly the PMDG 737 is such an intimidating plane to me as a casual aviation enthusiast, but your tutorials make it very simple!

[@BritishAvgeek]

Fantastic to hear! Sure is complex but that makes it superb to learn 🙂 hope you're enjoying it!

[@chuck176]

@@BritishAvgeek how do you release the parking brake I’m using a keyboard and mouse and I can’t seem to do it

[@Chundiii]

@@chuck176late reply but simply clicking on the parking brake should work. It’s by the throttle quadrant

[@chuck176]

@@Chundiii 💯💯👍

[@jeffallen5871]

@@chuck176 I've also heard you need to hold the regular brakes in, while engaging or releasing the parking brakes.

[@LuLeBe]

I think the panels on the A320 are SO much more intuitive. In the 737 you have to figure out which switch position is currently set by judging the switch angle or looking at a light somewhere around the switch if there is one, while on the A320 the switch itself has the light and immediately tells you its position. Honestly gives me a lot of appreciation for that cockpit layout.

[@BritishAvgeek]

indeed, much more thought and careful use required. Airbus is definitely much better in terms of the way they lay the flight deck out and the way it shows systems to the pilots

[@LuLeBe]

@@BritishAvgeek yeah probably a leftover from their much longer history. I can imagine that pilots can toggle the switches blindly after a while and would be really upset to suddenly have a button instead where you can't feel the position without looking. Just for the sim and probably new pilots as well, the Airbus seems more approachable.

[@hammerdown_9627]

I love it. Everything up until 6:18 you could tell that BAG was proficient and had spent many hours in the cockpit of the PMDG 737. Almost to the point of being complacent of it’s beauty. Then at 6:18 it hits him again, a small giggle of excitement and a nod to this phenomenal product from PMDG. This plane is incredible. Happens to me every flight in it at some point.

[@BritishAvgeek]

🤣 love that! You've summed it up wonderfully with my reaction to their product... It's wonderful!

[@leseur6675]

Thank you for your work on these 737 PMDG videos, can't wait to put them to use as and when. all the best LeSeur.

[@BritishAvgeek]

You're most welcome 🙂 hope it helps when it's released too

[@KevinRowe-v1h]

Thank you so much for your brilliant tutorials. They are so clear and concise. Don’t know how I would get on without them. Thanks 👍

[@ChaosHamsterG]

Hey! You may not remember me, but I took a few month break from MSFS. I remember subbing to you at 400 subscribers and I am back from my break and Fabio mentioned you so I was seeing how you were doing, you have grown so much and I’m really proud of you bro. Keep growing and making amazing videos

[@BritishAvgeek]

Thanks! Great to see you back 🙂

[@kiekiek]

Thanks! Can not wait for the release. I mainly fly the F16 and some other fighter jets in DCS. This is quite a bit different. Looking forward to it.

[@jxk4500]

Same here. Currently going hard on the f16. 737 is gonna be a blast tho

[@BritishAvgeek]

Nice! Very different, I'm sure you'll love it 🙂

[@WH08-ED]

Great vid! I've watched loads of other people(credit to their effort/time) but you do everything in one video so this is amazing helpful as I spent most my summer saving up.

[@BritishAvgeek]

Enjoy!

[@bambameron]

Thanks for taking the time to break this down--you're truly appreciated.

[@CanadaSouthern]

Great vid! I've read thru the PMDG tutorial flight, but watching the video brings things all into visual context! Thanks!

[@BritishAvgeek]

Great to hear Richard thanks!

[@speedbrake22]

I really want to see this in VR. Thanks for the tutorials, good to refresh and expand that old rusty Zibo knowledge!

[@Hani_Santa]

Yes I was always scared for PMDG in VR, but it's actually FPS friendly. That's amazing!!!

[@cubingwithcarl4572]

Notes to self: *------ STARTUP ------* Battery GRD Power IRS Nav Fuel Truck *------ MCDU POS ------* *------ Preperation ------* Logo Lights Yaw damper Seatbelts and no smoking Brightness 09:00 - 09:25 Window Heat On (Except middle) Elec on APU Bleed On (10:40) 11:25 - 11:46 Left Fuel Pump APU Start --- Wait till finished and APU GEN Blue Light --- 12:40 - 13:00 Two middle APU-gen On GRD Power Off - MCDU MOST (13:09 - 22:35) - ILS Frequency ATC Frequency Ta/Ra QNH - MCDU LAST (25:35 - 25:50) - (26:10 - 26:45) Fuel pumps Anti Collision Light AUTOPILOT *------ PUSHBACK **27:50** **30:25** ------* Engine GRD Engine 25 = Fuel Cutoff UP Repeat ENG 1 Outer Gen 1 and 2 ON *------ LAST **30:30** **31:47** ------* Packs AUTO Probe Heat ON Anti Ice NES Isolation Valve AUTO Apu Bleed OFF Apu OFF Both Engine CONT Flaps Elevator trim

[@Yogi0411]

Thank you, very helpful as I never flown a Boeing. Also your checklist and simbrief tutorial with the airframe are superb.

[@BritishAvgeek]

You're welcome 😁

[@JenniferinIllinois]

Saving your tutorials for when I finally get my hands on this. 👍 Definitely going to help me the first time I try to start it up.

[@BritishAvgeek]

Thanks! Hope they do prove useful 😃 feel free to grab the checklist I've created for free too from the website 🙂

[@JenniferinIllinois]

@@BritishAvgeek Oooo, will do!!!!

[@BritishAvgeek]

@@JenniferinIllinois britishavgeek.com/pmdg-737 if you need it 🙂 hope it's useful! Luke

[@goranlinder2387]

Perfect tutorial as always. Thank you so much for your efforts. Can't wait for the release. Maby I'll wait for the 800...

[@BritishAvgeek]

Great to hear Göran thanks! Hopefully the -700 is just around the corner and you can decide to dive in, or hold on for 12 weeks for the -800 🙂 either way I'm sure you'll be rather happy with your choice

[@goranlinder2387]

I had the 737 NGX from PMDG for FSX and I really miss it, so yes it will be very exciting when released for MSFS2020.

[@BAboymr]

Bit of info, the 3 green lights on the right of the fire handled are test lights for the engine fire and APU fire bottle squibs

[@neddycz]

I see you are a man of culture when choosing LKPR as departure location

[@BritishAvgeek]

I like to embrace everyone for who you are 🙂

[@migaviation-official]

Thank you, i was confused on the controls os this 737, but with this video, you saved me! +1 subscriber :)

[@chrispurkiss1491]

I have been subscribed to you channel for sometime. I like the relaxed way in which you speak. I haven't yet followed mall the flight plan input etc. although I have the Simbrief plan downloaded. I have tried several cold and dark tutorials but I always fail when it come to arming the A/T, as it fails and I haven't yet had a definitive answer as to why but believe it may have something to do with the throttle. As others have said the 737 is very complex and at the age of 84 I can't retain information as well as in the past and I have decided to create a check list from the transcript working together with clear images of the panels so I can see exactly what switches I need. I am able, albeit slowly to manual program the FMC Wish me luck

[@BritishAvgeek]

@@chrispurkiss1491 thanks for following - feel free to ask questions 🙂

[@purplemate340]

Thank you soo much for these tutorials! Those really helped me a lot, and got me to do my first 737-800 flight (YMML - YPAD)

[@muratyagmur3657]

nice video and nice tutorial explanation mate... PMDG is always da best...waitin' to release impatiently...

[@BritishAvgeek]

Thankyou 🙂 feel free to head to my website to download the little free checklist I've created

[@-eLMango-]

God I can't wait for this. Game changer.

[@BritishAvgeek]

Absolutely! That, plus the 146 and the MD82 all in 2 weeks have really made MSFS excel

[@tgmjrtgmjr8221]

You can also monitor the APU EGT and RPMs on the lower EICAS display.

[@BritishAvgeek]

Nice tip thanks for sharing with everyone 🙂

[@yams900]

Excellent work as usual ! Always enjoying your informative tutorials. I hope 737-700 will be released soon. Unfortunately computer on service, pump for cooler died. Fortunately NZXT comes with 6 years warranty! Should be up in the air by the weekend :) Feels terrible watching KZbin videos when you’re stuck on the tarmac :(

[@BritishAvgeek]

Ah not good Ronnie! Hoping it'll all be fixed quickly. Glad you're enjoying the tutorials in the mean time 🙂

[@MrPeterhemm]

Excellent - keep them coming!

[@BritishAvgeek]

Thanks Peter 🙂

[@krozareq]

Very nice plane. It's a good first release. Still missing some things but they'll likely be coming down the road

[@BritishAvgeek]

Missing what? Weather radar and EFB? They've already said a lot in their forums that those features are coming in the near future

[@captainarias6338]

Thank you for this. If it wasn’t for your detailed videos i wouldn’t be as comfortable (sorta) with the PMDG 737. I think I’m missing a step but not sure which one. After 10,000 fl a cabin altitude warning comes up. Still learning, thank you!!!!

[@XCougar85X]

This looks seriously nice. Thanks a lot for the video. I can't believe this seemingly runs better then the FBW a320. If it remains that way i'll be amazed.

[@BritishAvgeek]

Thanks! Absolutely - it's remarkable for performance and really looking forward to seeing it released soon

[@stu3tristan9x9]

An exceptional video, in every way, thanks so much

[@CMDRRustyDog]

Great stuff, thank you. A couple of items in the FMS I didn't quite pick up on but I'll try to manage this. Hope you can do a full tutoral of how to use the features on the autopilot. I'm so used to the A320 now, that I'm having some issues with the AP on this thing.

[@BritishAvgeek]

I'll see what I can do 🙂

[@AzzySunfire]

I have so many questions about this plane. Mainly the -why- of the different levers, and the alternate lever positions and the consequences of doing it 'wrong'.

[@BritishAvgeek]

The 737 is odd because it's a modern airliner full of 1970s tech as well, all mixed into one aircraft so it requires a lot more input than others

[@simpilot6228]

what a beautiful aircraft well worth the money in my opinion

[@BritishAvgeek]

Absolutely!

[@Juzzy007]

It's such a tease that so many already have it, yet they're unwilling to advise of a release date!

[@BritishAvgeek]

Only three content creators have it so far and then the unknown number of beta testers - I'd say it's less than 20 people 🤣 it'll be coming soon

[@ur_round_next1216]

Thanks for the video, Ill be watching this about 10 times over...Cant wait to fly this bird in VR once iv learnt everything in pancake mode :)

[@BritishAvgeek]

Awesome! Hope you find it and the checklist I've made useful too over on my website

[@ur_round_next1216]

@@BritishAvgeek Ill be ckecking that out for sure cheers bud

[@kevin1873]

Very nicely done. Hopefully this will help a lot of people who can find the 737 a big overwhelming with all the buttons and dials. Just a few simple things to help those who are not especially familiar with the 737 as of yet. The LAND ALT on the overhead is first set to the altitude of the departure airfield in case an emergency landing needs to be made after takeoff. For simulation purposes we don't usually plan to land back at our departure airport but you never know. Also, kind of disappointed in the APU start procedure. In general on a warm day you typically don't need to hold the APU start button for more than 3 seconds but on very very cold days, you have to hold the APU start button for at least 5 seconds and in some cases it can take about 2-3 times or more before the APU will actually start. Especially if the plane has been sitting for a few days. I don't like that with this model it's just a simple click and done. Your Trip Fuel value goes into LSK 2L on the PERF INIT page for PLAN/FUEL. That number is also provided in simbrief. This tells the CDU what your trip fuel requirement is from Origin to Destianation so other calculations can be done correctly. The Transistion Altitude for the departure airport also needs to be changed in the PERF INIT as well. You left it at FL180 by default where it was probably different for your departure airport.

[@chrisloach9658]

Do you have a basic how to get started tutorial series like this for the A320? I had a look at the playlist you have but all the videos seem a bit niche like how to use the printer and photoshop the coffee mug etc...

[@hiortintexasracing]

Great tutorial - just got this aircraft. I notice that the 3 point switches does not "stick" in the On position. Eg, It does start the APU but the switch does not stay in the ON position.

[@BritishAvgeek]

Indeed - it's spring loaded I believe 🙂

[@captprozac8717]

Don’t arm the emergency exit lights until you get AC power on the aircraft. Wait to arm these until after you put ground power or APU power on the aircraft. Each of those emergency lights has its own battery and you will run them down. They won’t come on if there is AC power on the aircraft

[@Bareetnavn1]

Very nice tutorial, you have helped a lot, and I can now fly the airplane completely with no problems. One thing I have though wondered about, when I have started up the airplane, and I want to test the stall warning systems, nothing happens. Do you know why?

[@BritishAvgeek]

Try to test the stall warning while the chocks are on before you push back

[@Bareetnavn1]

@@BritishAvgeek that is what I do, I do it in the order as in this video. I can’t really understand why, but I must be doing some thing wrong then. And I did it in the PMDG B737-800 not the -700.

[@cursecat111]

Just got the 600.Looks really good but just having a bit of trouble trying to get it going.I'm going through with this tutorial as I assume the use the same layout/start up. I've never used the FMC before for anything.I've just used MSFS flight plans or Little Nav map plans.I don't use Simbrief or the other one so I'm hoping that will suffice when I do do a flight.Cheers.

[@BritishAvgeek]

Hi! Sounds like fun! Definitely check out simbrief (you can sign up for free for a basic airac)

[@nooneathome1433]

Had this module since release and having great fun with it. Not unlike many other players there are things that can be improved by investigating, reading, watching and inwardly digesting whatever information can be found as there doesn't appear to be a manual as such. I do appreciate very much your efforts in providing an amount of aforementioned information. I regret however as a tutorial, it falls short. As a demonstration, very good. As a tutorial, no. Perhaps if you could do a little research as to techniques of instruction, it would take a small quantity more in transforming a " Demonstration" into a true "Tutorial" Please note, my opinion counts for bugger all. And I do watch your postings.

[@BritishAvgeek]

Good to hear you're enjoying the PMDG 737 for MSFS! A true tutorial of course would lengthen the video into a much longer size and I've tried to capture it in a way to cover the wider community without going into a ton of complex details but thanks for your thoughts and feedback

[@anbrod1]

Nice! Now we just need to get the lovely bird released !!😀

[@BritishAvgeek]

Thanks Anders! Coming soon 🙂

[@sritzalboomyt4818]

The tutorial was very good. I have one question how does your Sim look so crisp and the colours look so on point I have a very good PC with high specs but I still can’t get this crispiness

[@dantriix]

"No power hooked up whatsoever...but the GPU is hooked up. Moving on to someone else's video since getting the ground power unit to the aircraft is something I don't know as I imagine others might not either.

[@BritishAvgeek]

You'll find it in the FMS under FS Actions - Ground Services - Request GPU 👍

[@johny5400]

Just one thing. Dont turn on the APU BLEED before u start the APU and give it a moment to run. APU BLEED puts a pressure on the generator and it is a common thing to let the generator run a minute before turning apu bleed on

[@BritishAvgeek]

Indeed, we've spoke about it on live streams a few times - the APU bleed is in various positions based upon what state saving you select to start in

[@beesmongeese2978]

Is this true for Airbus' too?

[@johny5400]

@@beesmongeese2978 yes, basically, APU BLEED is demanding on the APU. If you start a car from cold, you dont push the revs to the max as well. This is the same. In reality, pilots allows the APU to run at least a minute before pushing it.

[@yams900]

Downloaded the checklists, great !

[@BritishAvgeek]

Great to hear!

[@NabeelGames]

Ofc it’s our fav Luke at work

[@BritishAvgeek]

🙌 hopefully the video helps quite a few 🙂

[@NabeelGames]

@@BritishAvgeek it certainly has polished my memory ✌️

[@gunzgang825]

Thank you so much for the help!!

[@BritishAvgeek]

You're welcome!

[@CrashEd1664]

Excellent tutorial mate 👍👍

[@BritishAvgeek]

Thanks Ed! Hope its helpful for plenty starting at 0hrs too 🙂

[@jacksoncnc]

14:35 what does the percentage mean on TOCG

[@nzbankboyinvr4713]

Awesome vid, really helpful, I couldn’t even start the engines until I watched this (despite trying 😂) I notice your steps in the vid are quite a bit different from the PMDG checklist on your website, so I amended my own checklist a little to match, one thing I noticed In the vid, you said you would turn recirc fans off before starting the engines, but didn’t….does it matter? Should they be off before engine start and back to auto after? Thanks again! This will be a popular vid since the 737 release!

[@BritishAvgeek]

I think I meant the Packs go to Off for engine start. And yeah the checklist I created was made after the videos were made, as I created my own flow over a few more weeks

[@nzbankboyinvr4713]

@@BritishAvgeek ah thanks man, yeah left the recircs to auto and the plane didn’t blow up 😂

[@stevepgaming1992]

great video mate and cant wait to fly on release, where do you change the settings for the IRS to be realistic and not instant?

[@BritishAvgeek]

Thanks! It's all in the FMS inside the many many pages of customisable options 🙂

[@SmartSitti]

nice tutorial! What pushback add-on are you using? the voice comm. made it more realistic.

[@BritishAvgeek]

It's Toolbar Pushback on flightsim.to

[@SmartSitti]

@@BritishAvgeek thanks so much

[@jdjay2505]

Great video thank you, I didn't catch site of them but im hoping this aircraft will have the usual PMDG turnaround short and turnaround long panel save states already in

[@BritishAvgeek]

Thanks! You'll be pleased to know that the various state saving options are there

[@soap1230]

Hello, how to set IRS align time as real life not instantly? thanks

[@BritishAvgeek]

just change the setting in the FMS

[@soap1230]

@@BritishAvgeek well, I was looking for it in the FMS but found nothing about it, that's why I have asked here. maybe I just missed it. thanks for reply, mate.

[@soap1230]

@@BritishAvgeek thanks. I think I've found it

[@AstroDad]

Thanks for the video, would be nice to see the variance of liveries at some point so far I've still to see a livery that I really like. Do BA or easyjet operate 737? Are there any checklists available, or due to be made available?

[@BritishAvgeek]

Hi! Been covering a few different ones in live streams too and more to come as well 🙂 checklist wise I've created one and it's available on my website too free to download

[@tonker6996]

I believe BA do operate the 737 as a regional aircraft.

[@BritishAvgeek]

@@tonker6996 they have a subsidiary called Comair in South Africa

[@commander_shadow2444]

Easy jet do not operate a 737 they used to ages ago same for ba I think they may still fly a few but rarely seen

[@BritishAvgeek]

@@commander_shadow2444 yeah neither operate the 737 anymore (except for Comair)

[@Catamount287]

how did you come up with +30 for your SEL/OAT in the N1 LIMIT page?

[@BritishAvgeek]

at the time there were no performance calculators available for it so VAS Airplane Toolbox was what I was using. Now of course, we have use of the UFT too

[@only4cmers846]

As always great videos mate. I keep wondering why when i'm turn on my HYD PUMP, ELEC 2/ELEC 1 the low pressure light not going off?

[@BritishAvgeek]

Even when the APU is eventually on, and APU Gen and Bleed?

[@abrievisser3613]

Hello Captain, how do you get the outside camera to move in circles around the plane ?

[@rymdskrotet]

Love your tut's! I just got the 737-600 and printed your summarised chklist. Great! But I would also love some sort of checklist "What to do before engine start" (all things mentioned in this video, but sometimes its good to have it printed). Not so many steps, but still quite a few for a airliner-beginner like myself. Maybe you have such a list, or can recommend me where to download it? =) All best! Oh, and you have precis 1600 likes on the with now. Dont thank me... ;-) Great work you do! Keep it up.

[@pnwaviation5567]

Thank you so much for this tutorial!

[@BritishAvgeek]

You're most welcome! 😁

[@steveg1927]

I was wondering why you didn't load your flight plan from Simbrief, I see that while it loads it isn't quite right.

[@scottfranks6362]

Do you know if you can now or if they will later implement the option to have the FMC on a separate tablet like you can with the FBW A320? I really love that feature. As always mate great video’s. Thank you.

[@BritishAvgeek]

Hi Scott - they're aiming to make a new EFB and add it to the aircraft in due course 🙂

[@scottfranks6362]

@@BritishAvgeek that’s awesome work. What I meant though is you know how now you can have the MCDU on your own tablet, will you be able to do that with the 737 version of the MCDU. FMC isn’t it? I think lol

[@tgmjrtgmjr8221]

If you do some research you will find all of what you ask from PMDG here: forum.pmdg.com/forum/main-forum/general-discussion-news-and-announcements/169846-19apr22-pmdg-737-development-update-let-s-talk-about-early-adopter-and-continued-maintenance-phases

[@BritishAvgeek]

@@scottfranks6362 ah well as the link above will show I don't think that's in the pipeline

[@pm110978]

Thanks for the tutorial mate 👍

[@BritishAvgeek]

You're welcome! 🙂

[@soap1230]

Good video, thanks. But I've got an issue that nobody knows anything about it around me. I think some pro pilot like you can help. When I am cruising, Lower left of PFD has 'INVALID ENTRY' in green. how to fix it? I guess it's something about FMC. Thanks, and thanks again for such good video

[@BritishAvgeek]

near to the Autobrake knob there are two small dials for VREF - make sure they are on Auto :)

[@soap1230]

@@BritishAvgeek Thanks

[@CactusBravo42]

I have the TCA thrustmaster Airbus throttle set. Will you be able to make a video to configure the same or a similar throttle for the aircraft?

[@BritishAvgeek]

Hi, so I have the TurtleBeach VelocityOne Flight kit which is awesome for this. No calibration/configuration required 🙂

[@SmartSitti]

there are many tutorials that shows how to configure TCA Quadrant that makes it perfect for this aircraft. short video clips that will give you the perfect experience.

[@Radiomate]

A other fantastic video thanks very much 🔥

[@BritishAvgeek]

Thanks Matthew 🙂 don't forget the checklist on the website too if it'll be helpful 🙂

[@GobiTheDragon]

Hi, I was just wondering why even though I had followed through this whole tutorial with no mistakes (that I’m aware of) but when I disconnected the GPU the first officers screens turned off and the aircraft seemingly lost power. The FMC and PFD stayed on along with a couple of lights but all else seemed to have turned off?

[@francsalazar]

Silly question... Will this plane be able to start in flight, just by setting the arrival airport on the FS menu?

[@BritishAvgeek]

Now it's something I've not tried to be honest so I don't know - you can set the default load state to Runway so everything will be "ready for takeoff" without route data but who knows

[@francsalazar]

@@BritishAvgeek thanks!! if it appears that way on the takeoff, I guess it will be ready to land as well. Just onne way to be sure, tho... when it comes out, I´ll see if I crash immediately!! :D

[@BritishAvgeek]

@@francsalazar 🤣

[@commander_shadow2444]

Will be using this when I get it lol I can’t wait any release date predictions?

[@BritishAvgeek]

Awesome 😎 no idea on release date sadly - hopefully soooon 🙂 be sure to grab the checklist too on our website

[@commander_shadow2444]

@@BritishAvgeek yup and defo hopefully soon since sim update 9 is tomorrow I think we may see it this week or next

[@BritishAvgeek]

@@commander_shadow2444 fingers tightly crossed!

[@nrsproj]

Thank you! Wich addon do you use for pushback?

[@BritishAvgeek]

kzbin.info/www/bejne/qISWeXuGipmrbs0

[@tgmjrtgmjr8221]

Need to change your power setting switch from Battery to Grd Power to APU to Gen 1 or Gen 2 after startup.

[@AlfaRomeoFox]

I follow step by step but when I come to accelerate, throttles doesn´t increase the engines power... any idea. No chcuks, no breaks,

[@BritishAvgeek]

What setup do you have?

[@IIBL4D3II]

Hi! Do you know if 2D view for the overhead and fmc/panels is or will be available? Having a big setup it would be much easier for me to set a button for a specific view to set a route or a command instead of having to move the view with the mouse and arrows while mid flight. Would help me a lot during critical phases of flight

[@BritishAvgeek]

Hi, it's not available - and to be honest I'm not sure if it will be available in the future

[@IIBL4D3II]

@@BritishAvgeek Hi! Thanks for the quick answer. Anyway i decided to buy it anyway and i was happy to see that they implemented the various camera settings to the different instrumentation by pressing CTRL+ numbers from 1 to 9. It uses the 3D model view so it s actually even better than what i was hoping for. I just had to create a quick shortcut to the buttons on my stick. Now as a newbie my only difficulty is setting a proper way the tca quadrant and reverse. 😂

[@BritishAvgeek]

@@IIBL4D3II try setting the reverse keybinds differently

[@FrizyPlayss]

you have to inpput flight plan manually? you cant import the flight plan from simbiref ?

[@Huddison]

Bookmarked for later use ;)

[@BritishAvgeek]

great to hear! :) more to come too

[@chrisbarker5336]

Hey, do you need to turn on the APU at all if the ground power is availbe?

[@BritishAvgeek]

You'll need the APU to start the engines

[@chrisbarker5336]

@@BritishAvgeek thanks for the quick response 👍

[@hinnersmusicstudio]

Is it the same as the PMDG 737-600 model?

[@Winter_huntsman]

Well with price and date announced time to study the videos

[@BritishAvgeek]

Let's gooooo!!! 🙌🙌

[@Winter_huntsman]

@@BritishAvgeek I’ll still be using the AI ATC but definitely looking to flying the plane. Your tutorials have been a great help so far

[@BritishAvgeek]

@@Winter_huntsman nice to hear thanks! 🙂 Go grab the checklist from my website too

[@AL22222]

Hello, I have a issue where my stall speed is really high on landing. (Stall speed at 160 when on approach with flaps 2)

[@BritishAvgeek]

What's the aircraft gross weight?

[@NilleFix]

Those vehicles, stairs, pushback trucks standard in MSFS or an ADD-On?

[@BritishAvgeek]

LatinVFRs Arex custom ground vehicle packs 👍 the PMDG ones are included in the aircraft

[@NilleFix]

@@BritishAvgeek Nice! Thanks you!

[@Adriansdr07]

Very nice👍Although do you know what the release date is?

[@BritishAvgeek]

Not yet - hopefully soon after SU9 but in any case it'll release "soon" 🙂

[@peterkaiser3682]

Oh yeah baby........thank you.

[@BritishAvgeek]

You're welcome 🙂 don't forget the checklist I've made if you wish to use it too

[@peterkaiser3682]

@@BritishAvgeek Checklist ? Where is it?

[@BritishAvgeek]

@@peterkaiser3682 britishavgeek.com/pmdg-737

[@peterbassey9668]

For reasons I cannot yet determine, my parking brake refuses to animate fully except to give off a clicking sound but with no movement. As for whether it actually keeps the aircraft bound to the spot, I think not because movement is still detected even after it’s been activated. Would you advise I delete and redownload the PMDG ? Is that likely to help at all?

[@BritishAvgeek]

have you ensured you're using the new realistic braking system? You have to fully press the brake pedals down and then toggle the parking brake to set it.

[@peterbassey9668]

@@BritishAvgeek Wow! Thanks a billion, mate. Came home, set up the system and whowee it worked like a charm! You just saved me some gigabytes of data and I can’t thank you enough!!!

[@AndyCYXU]

Is there a passenger cabin or you are not allowed to show the cabin ? Haven't seen it on any previews.

[@BritishAvgeek]

We've showed it a few times in the livestreams - currently a cabin is present in drone cam mode but if you set the custom views as I have done for other aircraft it disappears as the camera mode is different

[@AndyCYXU]

@@BritishAvgeek haven't seen any live streams oh well.. so you are saying that it is NOT possible to walk around the cabin like in Aerosoft CRJ for example or the CS777 ?

[@farahobaid3965]

Is this a tutorial for the 737-700 or the 737-800? And if it is for the 700 can I use it for the 800?

[@BritishAvgeek]

All of them - they're all the same jet, same systems 🙂

[@farahobaid3965]

@@BritishAvgeek ok thank you🙂

[@Quak3cry]

Kind of wish you did this tutorial from the default stage the plane starts in with cold and dark. You spend a lot of time looking at things that needn't be looked at

[@BritishAvgeek]

The default stage for Cold and Dark with GPU connected is the exact state we used in this video so not sure what you're using/watching!

[@Quak3cry]

@@BritishAvgeek i meant that by default certain switches are off regardless so although irl they would be checked i feel it would've been easier to skip those parts and only touch directly on the switches actually clicked. But other than that i quite like your tutorial

[@sagetx]

​@@Quak3cry Trust, but verify.

[@marcghezzi7453]

Very good thanks 👋🏻

[@BritishAvgeek]

Welcome 👍

[@scopedplayer290]

Is it all the same in the pmdg 737-800? Like all the buttons?

[@BritishAvgeek]

Yes 👍

[@matthewcallahan5154]

Does this airplane have an EFB like the A320 can you automatically load the simbrief flight plan?

[@BritishAvgeek]

Hi, currently no - I've made a video showing how to put a simbrief flight plan into the aircraft easily so check that out. PMDG have stated that an updated EFB will come in the future

[@jtepsr]

can you show how to import simbrief flt plan into fmc

[@BritishAvgeek]

Sure can James 🙂 kzbin.info/www/bejne/j16QooaOetClZqc

[@Bigman-ut1dh]

Hey, for some reason, when i start the plane, the panel in fron of me showing altitude is not turning on. Any fixes?

[@realbloxgamingxd53]

How do u set the payload cause simbrief gives you a payload number

[@BritishAvgeek]

In the FMC set the cargo between fwd and aft cargo (payload is total payload so ignore that for now)

[@realbloxgamingxd53]

@@BritishAvgeek how do I set the exact amount?

[@BritishAvgeek]

@@realbloxgamingxd53 set the numbers until the aircraft is balanced and the ZFW matches what it says in simbrief

[@realbloxgamingxd53]

@@BritishAvgeek or should I just set the zfw only

[@michaels4162]

Hey ! The rain sound effect we can hear at the end : is it a mod or something or is it default ?

[@BritishAvgeek]

Hi, it's all default 🙂

[@columnedfox5508]

bcause i've got the MAX on MSFS 2020 is the start-up exactly the same

[@BritishAvgeek]

Should be but the breko3d 737max is an awful product so it won't be similar to this in a lot of ways

[@grajacakluska7966]

idk if i am stupid or something but i dont have init ref in my fmc

[@A1lantic]

my parking brake doesnt want to work, do you know a fix?

[@juliakutyla3533]

How do I fix the problem where the aircraft starts by itself?

[@BritishAvgeek]

You need to set a default state in the FMS to cold and dark

[@jumpjet777]

Long time since I have flown a Boeing, but I would have thought that you wouldn't climb out at V2, but something like V2 +20. So in this case 155 kn rather than 135 kn. Just something that sprang to mind ..........

[@BritishAvgeek]

V2+10 or +20 depending on operator I think :)