MST CFX-W J45C - Unboxing!

[@NicLewis]

I can't recall waiting with so much anticipation for a follow up video.

[@NaturallyRC]

In my opinion, your video is awesome! :-) 👍👍👍 I like it when unboxers work from prepared notes, like you, instead of just mumbling their way through.

[@Matteomeier]

Haha, I know, I use too much this opinion word! 😊👍

[@SHAYEN-cd5qw]

I'm looking forward to seeing the finished product and your first run with it Matteo.

[@wackyrc1394]

Impressive rc kit, excellent box art, thank you Matteo!

[@ShenRC]

Wow! This one looks nice , the body is cool!!

[@WorldControlRC]

Wow a really great vehicle :O Now I need the CFX and CMX :D :D

[@keithsmodelsandrcs6593]

Looks like a awesome very cool good strong upgraded kit set up for the rc

[@jorgh4364]

Tolles Video. Danke. Ich hoffe, dass nun die Räder gerade stehen, wie das bei Starachsen sein muss. Die Räder mit Sturz sehen grauenhaft aus bei den CFX. Dann würde ich mir auch einen kaufen. P.S.: mag deine Seite und deine Videos. Kompetent und sachlich. Bleib gesund.

[@CarminesRCTipsandTricks]

Matteo - IT IS A KIT!!! I'm so happy it's not a RTR! 😁😁 That Body looks fantastic. Can't wait to see the Build. I wish MST products weren't so hard to get in the U.S. !! 😞😢 Stay SAFE my Friend!! 😷 Carmine ✈🚂🚙

[@SteliosRcdrift]

This is very beautiful truck Matteo!i believe its going to perform very well!

[@woodcox0171]

Thanks for the preview, Matteo

[@panzadeviborarc9613]

Great unboxing! Thanks for share!

[@rc3151]

Thanks for the review. I am just kinda looking into crawling. I am embarrassed to say I have always kinda overlooked the entire section. That is weird because I lo e RC and scale models. It really should have been the first i looked at. Looks like a nice model. Have fun building. PS your shirt is sweet cool!

[@ruftime]

This is a great time to get into crawlers, lots of great kits out now😎

[@Chunky246]

Nice detailing on the body.

[@KurtsRCs]

Nice unboxing can't wait to see you build it👍👊

[@Fourwheeljive]

Such a cool kit!

[@thatsmyrc]

this is a great looking rig

[@Matteomeier]

Thank you! 😊

[@rcjan5690]

Very nice, i like it and will follow the build. I think MST is really good brand..

[@busbart1958]

WOW, Toyota Land Cruiser Pickup, viel Spaß beim zusammen bauen, bin gespannt wenn er fertig ist.

[@RCVHX22]

WOW, Toyota Land Cruiser Pickup i love it, That's nice what I see, nice work my friend you have my like for sure#136

[@TheTankRC]

Looks good, Thanks for the unboxing

[@tinokung7554]

awsome Matteo, love it!!

[@nathanburnett6693]

Looking forward to seeing it completed and first run.

[@rolexr]

Das wird sicher ein schöner Truggy Matteo. Die Karosserie ist schön detailgetreu und der Landy hat einfach ein schönes "Gesicht"! Gruß, Robert

[@Matteomeier]

Genau! Vielen Dank Robert! 👍😊

[@mypassionrc-studioxd40lous66]

That's a great truck Matteo love you work for a long time 😎🏜🙏

[@inconchannel619]

Wow idol rc mst

[@ottomazzolino1574]

Hoi Matti, schon wieder ein neues Modell super 👍

[@spiritsforhire5056]

Please more videos on the cfx w j45! 😊

[@Matteomeier]

Coming soon! 👍😊

[@bamabiker750]

Very impressed by MST. That body looks magnificent! Glad to see someone finally offering this model in 1/10 scale -- so many others offer it in smaller scales. I also like that shirt you're wearing, have you watched The Mandalorian series yet?

[@Matteomeier]

Thanks! Not yet, unfortunately it can be only watched on disney+ I have not this and don’t want to subscribe this only because of the mandalorian

[@edenyan9009]

COOL!

[@Matteomeier]

Thanks! 😊

[@ЮрийКовалев-г9х]

Ждём сборку 👍👍👍👍👍

[@woodcox0171]

Matteo, I just noticed how close this is to your wonderful Tamiya Land Cruiser build. That body modification video was great and I learned a lot seeing your work. Thanks for sharing it. Do you have any typical lexan painting videos? I know you’ve mentioned no build video for this MST. I’m trying to get ready to paint my J45C when it arrives. I will practice first on another body because this will be my first try at painting. Thank you, sir. Edit: I think this is my third time watching this video:)

[@Matteomeier]

Here you can see something: kzbin.info/www/bejne/o3vOonSla8-Aodk And here: kzbin.info/www/bejne/rJusqYWAhqx3ZqM

[@woodcox0171]

Matteo's RC Movies thank you, sir. Good tips in those videos.

[@MrDarjelin]

Hi, I just bought it and it's a pleasure to build it, but did you have some missing M3 nuts ? There was 20 M2.5 instead of 16 in my bag, and 4 M3 missing...

[@Matteomeier]

I do not missing some nuts in my kit... on what build step the M3 nuts where needed?

[@MrDarjelin]

​@@Matteomeier Hi Matteo and thanks for your response. It was with the bags 7/8/9/10 (step 6 I believe). Arrived to the servo's support installation I had only one M3, and it was staying 4 M2,5 ( In the notice there have to be 16 of them for the knuckle cover... I have 20). If I can ask you something else, could you show and explain how you did the figurine placement please ?

[@Matteomeier]

Ok, here you can see some infos about the driver figure, it's another car but I use always the same method: kzbin.info/www/bejne/jWqbZoeefJxnmtE

[@MrDarjelin]

@@Matteomeier Thanks a lot Matteo

[@Pedro123-s6v]

😍

[@SoTwissted]

Just like the ones before it the bodies are the only thing that I would buy.

[@Matteomeier]

The chassis is not so bad at all...

[@shouryliu2916]

Newly designed battery cage, new equipment plate, new 80mm damper dedicated to CFX-W, and mainstream 313mm wheelbase, makes me thinking that my very first edition of CFX-W bought in 2017 was an unfinished product of MST....(=_=)

[@crawlmasta]

very nice truck, the only thing i don't like is the rear axle with steering knuckles

[@lr2648]

Hallo Matteo. Bitte wieder ein built video, das war toll. Insbesondere würde mich hier das Getriebe und die Portale interessieren. Außerdem bin ich gespannt auf dein Fahrvideo mit dem SCX III. Hier würde mich dein Urteil im Vergleich zu den TRX-4 Varianten interessiern.

[@Matteomeier]

Danke dir. Leider schaff ich diesmal kein Bau-Video. SCX III ist fast so gut wie TRX-4 😂

[@pongsunsaithanya3737]

May i ask you suggestion, if I have a budget for only 1 Rock crawler . Which one i should buy MST CFX-W, Axial III or Traxxas 4?

[@Matteomeier]

Vanquish Phoenix... 😊😊

[@GeneralHobbies]

👍

[@TheSkunow]

Sind die Veränderungen am Layout des Chassis auf den ersten Blick groß bzw. scheinen sie sich auszuwirken? Kommen wir eventuell auch in den Genuss eines "cut& paint" tutorials? Vielen Dank auf jeden Fall schon mal.

[@Matteomeier]

Nein, nur Details wurden verändert, ohne Auswirkungen auf die Leistung. 😊

[@TheSkunow]

@@Matteomeier Vielen Dank! Hat das cfx-w Chassis eigentlich mit Torque Twist zu kämpfen? Danke!

[@snap_fit8686]

Hi mateo ..How many gears this jeep have...?

[@Matteomeier]

Only one.

[@RoosterRC]

Der Truck schaut wirklich extrem geil aus! Hast ihn kaufen müssen oder gesponsert?

[@Matteomeier]

Danke dir! Ja, der wurde mir gesponsert. 👍😊

[@RoosterRC]

@@Matteomeier du glücklicher 😅👍

[@rabbitlucky9556]

Nice!

[@jakewang243]

太棒了，很喜欢

[@fankyfame]

The body size same like tamiya or biger??

[@Matteomeier]

it's a bit bigger, its for 313mm wheelbase

[@lacucaracha111111]

they could have included plastic beadlock rims

[@BlackMetalRC85]

hübsch!

[@kazacorpora]

chouette encore un

[@lincolnwilkinson7769]

Can you do a how to paint a rc body and do that light blue on your trx-4?

[@diaspo]

Ohh, you're a Simpson's fan! Do you reckon Matteo kinda sounds like Dr. Nick Riviera?

[@lincolnwilkinson7769]

@@diaspo maybe I am and y do you care a. And so what I'm allowed to ask if i want. SORRY MUMMY

[@diaspo]

@@lincolnwilkinson7769 Do you have a brain injury?

[@Matteomeier]

I have here some infos: kzbin.info/www/bejne/o3vOonSla8-Aodk The blue Defender is already finished

[@lincolnwilkinson7769]

@@Matteomeier thanks matt

[@1peanut]

I love building new RC trucks more than i like driving them but, It is impossible to afford new RC on disability income. But i love to build new RC so much my heart aches for them.

[@ka4172]

Schönes Video,leider immer noch die unschönen 3 Grad negativer Radsturz.

[@Matteomeier]

Dank dir, ich sage nicht unschön, ist mal was anderes, spezielles. Und funktionieren tuts sowieso. Wenn er eine schräge Traverse befährt ist das belastete untere Rad dafür im optimalen Auflagebereich für Maximalen Grip.

[@PhoenixRCCrawler]

👍🏽🐒🇺🇸.

[@prestonakins1532]

I just want the body

[@Matteomeier]

Soon it will be available! 👍

[@j0hnnykn0xv1lle]

Matteo - big favor - do you know what chassis and who makes the body on this UAZ camper van in this video? I'm not familiar with crawlers, only Tamiya stuff kzbin.info/www/bejne/eJWthIKNlKuJgKM Thank you!

[@Matteomeier]

Sorry, no. Most of this models are custom build. 😊

[@DashDrones]

It's not Tamiya. This is blasphemy 😂

[@Matteomeier]

🤪🤪

[@DashDrones]

@@Matteomeier 😁😂😁