Multi-Item Slot Sorter Expandable | Minecraft Bedrock Redstone Tutorial | MCPE XBOX PS

[@OmLedu]

FAQ - Common mistakes Items don't go past the 1st dropper- Look at the clock and back rows; If the clock isn't turning on & off then the clock is wrong. If the clock is turning on & off but the back rows are off. Then the clock's torch isn't connected to the rows. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can NOT be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch. Items consecutively skip random chests - 15:46 There can be NO overlapping signals powering the back rows, NO extra repeaters. If using more than 14 chests in horizontal rows, the rows MUST be sliced into individual sections powered by singular repeaters. If you have more than 90 chests, just use 5 stacks in the etho, & add a lever that activates the bottom most piston nearest the front. That lever will turn it on thus flushing the system. MIS sorters are better suited for non-bulk storage. So, rather than having 10 chests for cobblestone, just add a filter! kzbin.info/www/bejne/enjYgHxrhpJ9odUsi=mf5QhHsIkJI_H-PB Speed it up by 20% (check the timestamps to skip ahead) kzbin.info/www/bejne/q5_EZ3yarad7eJYsi=WluTm96PTdWD8nno That's also the java friendly version If curving around 2+ corners; It does NOT matter the pattern of the hopper/droppers. Just do it exactly the same as the 1st corner.

[@Squaradactyl]

Thank you so much!

[@OmLedu]

@@Squaradactyl Anytime!! Hope that helped

[@Squaradactyl]

​@@OmLedu definitely! The only problem I have now is that it never turns off 😂

[@OmLedu]

@@Squaradactyl if it never ever turns off, the the top most piston piston is not activating the bottom back most piston. So either: the top front most piston isnt getting activated by that top most redstone torch. There are no items, or more than 5 stacks of items in the etho clock (hopper pointed into hopper) Or, the bulb comparator observer under that etho clock isnt activating the bottom back most piston. For troubleshooting you can; 1. Make sure there is less than 5 stacks of items in the etho clock's hoppers, but more than like 32. (About 4 items per sorting chest) 2. look at the etho clock and see if the front most piston is activated. If no, it should be powered by the top most torch and dust. If yes, 3. Place in like 10 items to be sorted then go see if that top front most piston turns off, moving the redstone block to the front position. If no, then the front most observer isnt turning off the top most torch. If yes, then the bulb/comparator/observer/solid block, under that block of redstone is not activating the bottom back most piston.

[@Squaradactyl]

​@@OmLedu you're the best! I was missing the top redstone torch. I had something built above it that I demolished, I must have accidentally broken the torch 😅. Thanks again for the help!

[@itsDripsy]

Opened KZbin to look one of these up and this was the top of my home page. Great timing lol

[@OmLedu]

@@itsDripsy yay!!! Super cool, glad it was there & happy you enjoy :DD

[@gbecks3672]

I gotta say, your one of the best bedrock redstoners on KZbin, there are a few good ones, but for me you’re the only one who can explain how their design actually works in a clear and concise way. After one of your videos, I’m ready to build, there’s no additional information I gotta try to dig for outta the wiki. Thank you for respecting our time and sanity!!

[@OmLedu]

@@gbecks3672

[@guryflih4538]

All my Redstone keep going out

[@OmLedu]

@@guryflih4538 Are you on java? Java version kzbin.info/www/bejne/q5_EZ3yarad7eJYsi=5qktcGZw0gBVuXgK If you're not on java, please clarify what the issue is.

[@gbecks3672]

In the middle of building a storage system, I’m concerned this might go a little slow for the rest of my storage, obviously hopper speed would be ideal, any ideas for more condensed, lag friendly solutions that would go faster, I doubt my realm could handle individual item filters for everything

[@OmLedu]

@@gbecks3672 You'd be surprised! On bedrock hoppers really don't cause any lag. That is a big misconception

[@DBlotts1520]

Not only does this have a better input than my own design, but somehow it’s more resource friendly. There’s somehow slightly less materials needed to build this one compared to mine. This is dope bruv ❤

[@OmLedu]

@@DBlotts1520 Glad you enjoy!! Also the glass isn't actually necessary. I was just worried it might double activate the the droppers and cause a build up in the chests. But i didn't want to test it for hours and hours to find out XD But since then i have tested it and there is no difference

[@cjcasler2120]

This was awesome. Thank you. I all ways wondered how multi item sorters worked. Now I know. I'll be adding this to my current sorter.

[@OmLedu]

[@theflameviper2154]

It's awesome to see you branch out like this

[@OmLedu]

@@theflameviper2154 I put this off for so so long XD Because every time I saw someone build one it looked so huge and complex. But when I started designing it... it was easy XD I don't understand why other designs are so huge and complex.... maybe to make it faster or be silent?.... no clue XD Glad you enjoy though! Thanks for the support

[@wispp008]

Best item sorter video I've seen so far 😄Thank you for providing different alternatives to how we can go about building our own!

[@OmLedu]

Yay! Glad you think so

[@JoshuaTheory-ol2wy]

I made this exact storage system with fifteen large chests, three high by five chests long, made a corner like you showed, and added another fifteen chests, three high by five long, it's working perfectly but I had to work out a couple bugs first. I had to add two redstone repeaters and a button for it to push the items through to the end, but now it works perfectly. Thank you so much for your videos teaching redstone. If not for those, I wouldn't have known to put repeaters behind the corner section to make this system work properly.

[@OmLedu]

@@JoshuaTheory-ol2wy Noice!! Glad you got er a working! :DD Always happy to help. Leaning is fun & being able to find solutions on your own is a great feeling

[@bursac_]

For me, things are not pushed to the end, why

[@OmLedu]

@bursac_ Depends on what you mean by not being pushed to the end. Either one of the issues troubleshooted in the pinned comment, or the etho isn't set to long enough to fully flush the system.

[@bursac_]

@ I watched your video again more closely and found the problem 👍

[@liltray3683]

Just want to say thank you very much man, I am truly happy have found a simple automated system, you’re the best

[@OmLedu]

@@liltray3683 Yay!! Tysm

[@liltray3683]

@OmLedu well over a few hundred, thanks to your awesome tutorial, I'm able to simply set everything to my liking, again, keep up the awesome vids man, cheers🤝💯

[@OmLedu]

@@liltray3683 🎉🥳🎉 Cool cool! Exciting stuff :D & tyty will try my bestest!

[@itznyx18]

It's been a while since I last played Minecraft and I just got back to it few days ago! I still remember I subbed to you more than a year ago because I saw how you used tuff when it was new- and I am so glad I'm still subscribed because I'm DEFINITELY trying this! ❤

[@OmLedu]

@@itznyx18

[@madnsgraff3944]

Same here these are my favorite sorters

[@user-bn7pw9tc4g]

New to minecraft and to storage sorting. Great video! For me, all of the items are just stored in the first (top left) storage and isn't passed on from there. I'm at the stage of testing, dropping a random item in the input chest to see how long until it reaches the last output chest. Thanks for a good video!

[@OmLedu]

@@user-bn7pw9tc4g All sorter chests on slot sorters, must have at least 1 item in every slot. No empty slots until the "final" chests that will be for your overflow/ non-sorted itemz. Glad you enjoy!!

[@ChrisTheCentaur]

Nice, this is what i was looking for.

[@OmLedu]

Awesome :DD Glad I could help!

[@Hero-vj7eg]

this dude is really underrated

[@OmLedu]

@@Hero-vj7eg

[@MaalaAdrian]

Thank you for this! I was having troubles powering up the whole thing but I overlooked when my redstone dust died down then bam.. functional 5 by 28 sorting room 😂

[@OmLedu]

Noice! Did you get it figured out?

[@MaalaAdrian]

@@OmLedu I did but also at some point my items just kick to a random clear box even though I have boxes with all slots filled. Worked fine until like my 3rd row of chests. Did I do something wrong? Like a dropper or hopper placed wrong? Cause I’m missing 64 cherry saplings lol I can’t find where it got placed

[@OmLedu]

@@MaalaAdrian Hmmmm items are skipping a certain section? That would most likely be from overlapping signals on the back. Since you have so many chests you'd need to "increase" the signal strength. So, did you just add repeaters, or did you split the redstone lines into separate sections and then add repeaters? Can't have any overlap. The missing saplings I would guess are inside the droppers & hoppers near the end. Since you have 140 chests, even with 5 stacks in the etho clock it won't flush the entire system automatically. Can add a button or lever that activates the bottom front piston to flush the system when needed.

[@MaalaAdrian]

@@OmLedu thank you once again I figured it out. Somehow my clock messed up on the 2nd row and every other interval after. In short it’s fixed but the elusive 64 saplings have been sacrificed to the end void.. idk what happened but we move on 😂

[@OmLedu]

@@MaalaAdrian Goood goood, glad you got it fixed! I can't imagine where the missing saplings went though o.o very odd Could the be inside a hopper behind your overflow maybe?

[@fredhorsefeathers3225]

Wow Thanks this is exactly what I was looking for today! thanks so much

[@OmLedu]

Yay! I'm glad you found it :DD Fight back those chest monsters!!!!!! XDDD

[@sherylgaffket5940]

This sorter is fantastic! I have been looking for the right storage system and my son sent me the link the view you system. I have made one that is 15 chest long with a corner turn and then additional 5 on my short side. Your directions were clear and easy to follow for me that sometimes a challenge trust me ask my son. Just an FYI I am almost 60 years old a mom, grandma and a gamer which again my son started me on. I love minecraft and building because it relaxes me especially after playing the Hardcore RPG games I love. Keep up the great videos

[@OmLedu]

@@sherylgaffket5940 Nice! That's awesome. It's fun for the whole family. I once played on a server with an 80 year old and his great granddaughter X] Can be a really nice way to bridge gaps & share things with the people you care about :D All in all super glad that you enjoy & that I could be of assistance!

[@bleachjump98]

Hi it's me the son

[@OmLedu]

@bleachjump98 Hello!! Glad you found the channel & that y'all enjoy :DD Is super cool that you both play together!

[@ryn0_22]

Gonna build one for every block in game. One chest for every type of wood, every type of stair, slab, stone, etc etc. a room where you just throw your inventory in a chest after a round of collecting and not have to worry about inventory space lol. Pus a great spot for new people joining realm to get supplies they need to start their journey.

[@OmLedu]

Noice!

[@macpatterson1201]

Very helpful, thanks!

[@OmLedu]

@@macpatterson1201 Anytime :D Glad you enjoyyyy 🎈🎉🥳🎉🎈

[@haydnrogan6789]

Hey mate just found your channel. Really well done ✅

[@OmLedu]

@@haydnrogan6789 Yay, glad you think so & thanks for the support

[@edriemarricle6420]

Great job💜

[@OmLedu]

@@edriemarricle6420 tysmmm

[@edriemarricle6420]

@@OmLedu absolutely 😊

[@graduate8810]

Great video, super helpful and perfect timing for my new base! The explanations for the different sorting systems are very clear and easy to follow. It would be really helpful if you could do a more detailed explanation of the automated timer with the hopper clocks. My goal is to get the item filter and item sorter next to each other with a single block between them.

[@OmLedu]

@@graduate8810 Glad you enjoy! & you could prolly squish them together in some way or another. Could even flat out move the timer to the new input and run dust alll the way over to the MIS from there haha There is actually a breakdown of it near the end of this video.. kzbin.info/www/bejne/hJ69nJ2LZsqtfK8si=rRnQ8yS7qD-MuTDF But all it really is, is an RS latch that turns the clock on when items enter the bottom dropper. Then from the dropper's comparator we have a NOT (torch) into a t flop. So the t flop toggles whenever the dropper becomes empty. Observer notices that change and unlocks the etho clock. When the etho finishes counting the redstone block goes through a shortener to turn of the RS with a pulse.

[@lordshuv-rowyoknow6486]

I'm thinking of building this at my end of midgame, hopefully it'll still be working

[@OmLedu]

@@lordshuv-rowyoknow6486 yeryer! None of the core mechanics will change anytime soon. & I always avoid precarious mechanicz. For mid-late game too depending on playstyle, might be worth adding some bulk filters before the MIS :D

[@pots108]

I ended up making at 190 chest sorter with this 😂 great video

[@OmLedu]

@@pots108 Woooooooowwww!!! That's nuts XDDDD epic stuff! That's enough for every stackable item in the game right? XD hahaha so crazy!! If you built the automated timer, even at 5 stacks of items it won't quite push everything though X] but what u can do is add a button or a lever that activates that bottom piston with the torch on it. And that will give you a way to flush the system if you ever need to. Those items won't be stuck forever either way. They'll just idle until more items turn it back on. ;] You can also speed it up by 20% by switching all the dust on the glass (behind the droppers) with repeaters. Then turn the clock from a 5 tick delay to a 4 tick by poking the max delay repeater 3 times. So that it's at 1 tick below max. I didn't figure that out until i was designing a java friendly version. If you're interested but are not sure what I mean, I'm posting that video tomorrow. It'll demonstrate how, & be titled something like "java and bedrock multi-item"

[@pots108]

@@OmLedu I'll for sure check out what you said. I haven't gotten everything sorted with the chests yet, I need a little break after making it all 😂

[@OmLedu]

@@pots108 I bet!! XD that's massive hahaha Loading the chests is the most annoying part to me. It took me longer to load them than to build it XD

[@pots108]

@OmLedu omg yeah talk about delay 🙄

[@OmLedu]

@@pots108 yeah haha that be the downside to multi-item sorters. they be slow to load & slow to sort, but! simple to build at least :DD I usually combine stacked filters with a multi. stacked filters to speed up the sorting of common items. then all the flowers and dye and stuffsss go on to the multi. Buuuut filters get huge and expensive really quick XD

[@bennybenns]

Gunna try this this weekend and I’m just going to build one the same exact size in this video so I can try not to mess things up. We will be in touch this weekend lol.

[@OmLedu]

Noiceee

[@bennybenns]

Hey so as predicted somethings already off lol and please dont take offense by that its not you its ME I have never succeeded with redstone in my few attempts. I have a row of chests, 10 chests wide, 5 high. Everything went smooth until redstone torch placement. I finished the series of solid blocks, redstone torches going fine until row 8, highest torch up, it goes out. Every other torch is lit besides that torch. Id love help.

[@bennybenns]

Nevermind im an idiot I found the issue lol

[@OmLedu]

@@bennybenns nicceee, glad you figured it out :D Your response reminds me of something I would write. Was very refreshing X] If anything else gives ya trouble just a let meee knowww :>

[@bennybenns]

@@OmLedu just finished. Tested with a single block. Worked all the way through the system but didnt get to the test block in the bottom chest, it went to the top left most chest, closest top left chest to the imput. Went with the fully automated imput. When I was watching the video your imput just seemed to automatically connect to your chest system. Mine did not so I had to individually connect each layer with solid blocks and redstone dust. Im assuming thats where my problem is?

[@MarkPattershall]

Great job

[@OmLedu]

@@MarkPattershall Tysm :D glad you approve! 🎉🥳🎉

[@Bongwell420]

Awesome totally awesome

[@OmLedu]

@@Bongwell420

[@Bongwell420]

@@OmLedu fell in love with your detail many videos ago haha

[@OmLedu]

@@Bongwell420 Nice!! I'm happy to hear that! It's always hard to what what I should ramble on about, and what to just skip over X]] Lately I've been leaning toward just doing both. Like on this multi-sorter; I made this one to be long and explain the options. Then a short one that's just a simple follow along with no options haha Best of both worlds type of thing haha Personally I always wanted explanations, so it makes me happy when people like you do as well. But I also understand that allot of people don't wanna know, so would be nice to cater to them as well. Either way! Thanks for the support :D

[@Goopy_gal]

Not gonna lie. I watched this while collecting the materials then I watched it again lol

[@OmLedu]

@@Goopy_gal Noiceee. It's always good to watch tutorials before following along :D Helps to know what to expect, what you might need, or if the design is even what you're looking for

[@Minecraft_user94]

Nice 👍👍👍

[@OmLedu]

💙🎊🎉🥳🎉🎊💙

[@Minecraft_user94]

@@OmLedu can you do a wither skeleton farm pls.

[@OmLedu]

@@Minecraft_user94 Yussss. There are so many farms I need to get done T.T froglight farm should be next, but I'll start working on a wither skelly farm after that :D

[@Minecraft_user94]

@@OmLedu 👍👍👍

[@beebsis8761]

I would love some specification in terms of the chests and seed counts. Since I consider the "storage" chests only those that will store and not move the items. Which makes it 4*30=120 seeds, but if I count the chop chests it'll be 144, with the input chest 148. And they're all part of the storage system.

[@OmLedu]

@@beebsis8761 So sorry! Just 4 per storage double chests, or thereabouts. It's not suuuuper exact though, so I would test it when all is done & see how long it keeps clicking after moving a single item from start to finish.

[@THChrisco]

Amazing sorter I love it; my tick seems to be very slow though pushing the items through, anyway I can speed it up?

[@OmLedu]

Glad you enjoy! Yeah MIS sorters are suuuuuper slow. Biggest draw back to the simplicity & compactness, since each item has to stay inside of each hopper long enough for the hopper to pull & push. We can speed it up by 20% though! Speed it up by 20% (check the timestamps to skip ahead) kzbin.info/www/bejne/q5_EZ3yarad7eJYsi=WluTm96PTdWD8nno

[@Gsamel0442]

For mistake i build it on java 1.21.1 and it didn't worked, but redesignet it a litle bit and it works fine. If someone interested just hit me up ;)

[@OmLedu]

@@Gsamel0442 yeah, java version is very similar

[@whynaut1]

Make an item caregorizer next. I have made several based on tutorials, but I still have no idea how they work 🤷

[@OmLedu]

@@whynaut1 They are fancy!! I'm not the biggest fan of their shortcomings though. They are simple but super wonkey hahaha Once you see how they work it's like "ohhhhhhh" Like it's not really sorting anything per say. It's unlocking 1 cell and reloading 1 item, then dumping the rest into a separate funnel. They are just soooo unbelievably slow hahaha & don't tie in well with other types of sorting systems. Buuut it is really nice to not have to worry about slots like on a multi, or have 1000s of hoppers for a filter system XD lmaoao so categorizers def do have a purpose & a place! I'll try to mess with some designs in the near future, to at least explain how they worky :D

[@madnsgraff3944]

categorizes are strange i would like to see that too. maybe get some explination. wont build it though cuz minecarts

[@Rahulbpc]

Cool 🆒

[@OmLedu]

Not as cool as you! :D

[@EmilKurz]

Does the light bulb has to be oxidized? Great Video

[@OmLedu]

@@EmilKurz Nope, the oxidation level doesn't affect the bulbs in any way :D Glad you enjoy!

[@21Aera]

That's great! Thanks a lot! Just one question for my understanding: is the redstone signal powering only the droppers or also the hoppers?

[@OmLedu]

@@21Aera both!! The dust is powering every other hopper + 3 droppers. The torches are powering the hoppers that aren't being powered by the dust. So at any time only every other hopper is unlocked. && anytime! Super glad that you enjoy :D thanks for the questionnnn, & hope I answered it!

[@21Aera]

@@OmLedu Yes you just did, thanks again!

[@ImSpidercider]

Ive almost got it working. The clock works, and is making the back side flicker but my items are getting sorted into the first rows top chest and staying there (11 chests high) and I have the sorter on the bottom) Edit : I didnt place a block in every chest slot, doing so fixed it

[@dragonzilla123]

items keep getting stuck at the top left / first chest any solution? i’m on bedrock

[@OmLedu]

@@dragonzilla123 As in they dont go any further than the top left chest? If so, that sounds like the dust in the back is powering itself and not clocking. Make sure that the dust is not connect to the bottom row & only being powered by the repeater.

[@dragonzilla123]

@@OmLeduyes that was the problem thank you you’ve just earned a subscriber carrying on doing what ur doing ❤❤

[@OmLedu]

@@dragonzilla123 Awesomeeee

[@karebear1993]

I made the 5 chest one like In The video but it is skipping the 2nd row from top completely and spawning into the 3rd row. In the very first column have all 5 chest being for cobble stone. The top chest is full of all 64 stacks. The second one is not but it goes to the third instead. How do I fix this?

[@OmLedu]

@karebear1993 If it is skipping horizontal rows of chest, or is skipping random chests it's either; 1. Overlapping signals, the rows must be powered at the same delay & by singular connections. Can't have some connected with dust and others connected by repeaters, & can't have repeaters in between the connections. Also if it is too long to be powered by singular repeaters then it must be split into sections that are each being powered by singular repeaters. 15:46 2. The repeaters have different delays. 3. It is missing dust or the back rows are not being fully powered.

[@bursac_]

Some chests don't filter, the things go through to the last chest, why is that?

[@redbeautymsp3526]

So the item that I put in the input chest has never reached the last chest. I have a 5 tall and 10 wide chest storage, but the items keep getting suck in the first chest in the third row. What do I do? 😢

[@OmLedu]

@@redbeautymsp3526 The 1st chest on the 3rd row as in the top most connecting chest, or the sorting/ storage chest? All sorting/ storage chests have to have at least 1 item in every slot. If it's not going past the top most connecting chest the the hopper under that chest is never turning off. So the redstone/torch right there isn't recieving power.

[@Akmpro155]

❤️‍🔥❤️‍🔥

[@OmLedu]

@@Akmpro155 🎈🎉🥳🎉🎈

[@yunchuanlu7866]

Wow first time seeing this concept, is it only for bedrock?

[@OmLedu]

@@yunchuanlu7866 The java version is similar, just requires allot more repeaters. I also am not too sure how to make the programmable timer section in java, so I just used a lever for the that one X] Java version kzbin.info/www/bejne/q5_EZ3yarad7eJYsi=WluTm96PTdWD8nno

[@DBlotts1520]

In addition to the extra repeaters, for Java you would also need to change how you connect that extra repeater that extends the signal to the last few slices that are more than 15 blocks away. You would need slabs instead of glass because for some reason redstone doesn’t travel down glass on Java

[@OmLedu]

@DBlotts1520 Redstone can't travel down slabs either in java. Java thinks that glass is an upper slab X] But you can connect it lower and run it up the same.

[@DBlotts1520]

@ damn I thought that was the workaround. I have been bamboozled

[@OmLedu]

@@DBlotts1520 yeahhh java has allot of those tiny limiting factors. Plus it makes it super unintuitive. Like why is glass actually a slab, or why are pistons actually a door, why do pistons and droppers require a block update, etc etc etc. When i discovered bedrock my 1st thought was "oh they finally fixed redstone" lmaoaoa

[@MoveFaster]

Thanks

[@OmLedu]

@@MoveFaster Anytime!!

[@shadowedone1248]

So I built this into my wool farm and used the simple version of the intake. But for some reason the dropper that faced into the droppers going up to the top of the system on the first chest isn’t kicking things over to start their travel up, I replaced it with a hopper and boom everything works. I built everything as far as I can tell- correctly but it was just curious if you could think of a reason.

[@OmLedu]

@@shadowedone1248 Normally if the 1st dropper isn't activating it's because dust and a repeater are connected to the back rows creating an infinite loop. But if replacing that dropper with a hopper fixed it.... then the dropper next to that was/is recieving power.... There are no other issues? Only things i can think of would be, that 1st dropper wasn't aligned at the same level as the back rows of dust. Maybe 1 block lower or higher. So the dust powering the 1st dropper tower was pointed into the dropper diagonally up or down from that initial one rather than the one directly next to it.

[@jamesscharback4935]

Id probably never make or need a chest that sorts EVERY type of copper. Id strongly prefer the one items per chest sort. Or even barrels. Go to shulkers once full. More compact and less lag.

[@OmLedu]

@@jamesscharback4935 Yeah, personally I stack filters to combine stuff I use into singular rows of chests, and have a small MIS at the end sometimes for like plants, dyes, flowers ect. But allot of people like how cheap & compact MISs are, so to each their ownnnn. Stacking filters is def my go to. Even though filters are more expensive & less compact, they are faster & can just grab and goooo. Really depends on personal use & preference

[@rusebee7652]

Hi! Can you please do a tutorial on how to wrap a round second corner? I’m having a hard time idk why!!

[@OmLedu]

Replied to your other comment with more info, but it is just copy/paste. The only section that is "different" is the very 1st one, & that is only to make it easier to customize the input's location. Each section after a corner will be identical.

[@dora-uh7hs]

It keeps skipping over my first bottom left chest. All the other items sorted to the correct place except that chest. Right side hopper on back is pointing into the problem chest.

[@OmLedu]

Let's seeeee. If it is just that chest & that chest is on the bottom corner... hmmm is it missing a torch?

[@Suriononyoutube]

Where am I going wrong with the auto version because the simple version worked but now that I’m going to put stuff in it won’t get past the first dispenser!

[@OmLedu]

@@Suriononyoutube uh oh! Lets seeeeee... The 1st dropper as in the one right after the chest? If the items are going into that dropper but they rnt going anywhere, it sounds like it's not being powered... check the strength & make sure there is dust going into the dropper right next to it. & make sure the bottom row is getting powered. Thinking about it more it might be the strength since the clock got moved a tiny bit! See where the redstone dies out. If that is the case, u can just add a repeater after the torch on the clock. If that's not it, try to provide more details & we'll figure it outttttt.

[@kpow_22]

​@OmLedu I'm having same issue.. all powered up

[@OmLedu]

@@Suriononyoutube good point, if ALL the back dust is powered and stays powered, then the dust is connected to the lines directly & not through repeaters. Make sure that the back rows are only being powered via repeaters and don't have any dust connected

[@Suriononyoutube]

@@OmLedu we talked on discord about it brother, but I appreciate you man you rock! I do seem to have one small issue though some items that should get off loaded into the right chests seem to blow past it and end up in the fill chest at the end, any solutions to this?

[@OmLedu]

@@Suriononyoutube Oops mb. Hmmmm how often does it skip? And it is always skipping the same chest? & how many chests do you have?

[@anthonygonzalez7373]

My blocks wont go past the first chest (Top left). can anyone help?

[@OmLedu]

@@anthonygonzalez7373 As in the chest has empty slots, so all items go into it, or as in the items aren't going through the hoppers in the back?

[@Cocofelon32]

@@OmLedu oooooooooo this right here. I was confused because my items wouldn’t go past the first chest, read your replies to the same issues with redstone maybe powering instead of repeaters, everything was right though and clocking so I didn’t know why. I was confused because you had said to see how long it takes to get to the last chest but it wasn’t getting past the first one, once I put items in for it to sort into, it works perfectly fine. It was just acting as an overflow due to no items in the slots. Thank you sir, my answer was more simple than I thought. Subscriber definitely earned 🙏🏼

[@OmLedu]

@@Cocofelon32 Glad you enjoy & happy you got it figured out

[@Wili...]

​@@OmLedu yes my item wont go trught the hoppers and only the first row of redstone light turn on and off the rest always stayes off

[@OmLedu]

@Wili... If your rows aren't turning on then they aren't connected. If a row is staying on and not blinking on and off then it is connected with both dust and a repeater so the repeater is powering itself (or the clock is not clocking). 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch.

[@umeshtm2542]

Please help.... Some of my items are getting stuck in the last dropper and hoppers.. when i remove the items from the dropper, the items which stuck in the hoppers are delivered to the dropper.. Items won't go past the last dropper which is at the bottom. Every redstone torches are ticking according to the clock except the one near this dropper..( the last one in the bottom raw )

[@OmLedu]

@@umeshtm2542 If the torches are locked to 'off' because the dust is locked to 'on', then you have dust and a repeater connected to the rows. So the repeater is powering itself via the connected dust. If the torches are always 'on', the signal isn't strong enough to turn them off. 14:18

[@umeshtm2542]

@OmLedu fixed that.. but now another problem occurs where some of the items skips their designated chests and end up in the last chest.

[@OmLedu]

@umeshtm2542 Items consecutively skip random chests - 15:46 There can be no overlapping signals powering the back rows, no extra repeaters. If using more than 14 chests in horizontal rows, the rows must be sliced into individual sections powered by singular repeaters.

[@nikolapenava29]

i have a problem, my items won't push into the chests? even tho everything else is blocked, and lets say i have only oak planks in the chest. when i put oak planks in the system, it doesn't go there. but in the last chest. any help??

[@OmLedu]

@@nikolapenava29 If no items are being sorted it's either: The clock needs to have a 5 tick delay. So 1 max delay repeater & 1 repeater with no delay. Or there is extra repeater delay or overlapping signals on the rows. Ie: rows being powered with multiple repeaters. Or you're on java. In which case, here is the java version. kzbin.info/www/bejne/q5_EZ3yarad7eJY

[@pup5535]

Mine is skipping random chest in the system it is decently large but I double and triple checked everything and it still just flat out skips random chests

[@OmLedu]

@@pup5535 Items consecutively skip random chests - 15:46 There can be NO overlapping signals powering the back rows, NO extra repeaters. If using more than 14 chests in horizontal rows, the rows MUST be sliced into individual sections powered by singular repeaters.

[@Crxnosfr]

Hey could you possibly do a blaze farm for your next farm video?

[@OmLedu]

@@Crxnosfr That's a good idea!!! I'm working on a request for froglight atm. Then have a request for wither skelly skulls, so blaze would fit in nicely! :D I'll aim for that order, so in 7 days if all goes smoothly

[@OmLedu]

@@Crxnosfr Sorry that took so long! But here is a blaze farm

[@xxikhjxxiiujx3441]

Hello, I made one with only 3x3 chest using the simple input but the middle column of chests is being skipped and the items are going from the 1st column, straight to the 3rd one? FIXED! was just an issue with how the redstone was connected to the input thing. I'm really noob so can't explain how it's fixed, I just broke the connection, forgot how i did it originally, remade it and it worked this time. Thanks for the video👍

[@OmLedu]

@@xxikhjxxiiujx3441 Oh awesomeeee. Glad you got it figured out

[@Pavanshaji5559]

How can i build the input chest on the right side of the storage

[@OmLedu]

@@Pavanshaji5559 Everything the same just flipped :3

[@SimoneZingoni-c3h]

I have a question: if I wanted to make a corner next to the first in order to create a square magazine, the hoppers following the first corner I have to place them on the right or left side of the chests

[@OmLedu]

Doesn't actually matter, Just have the connecting (corner) hoppers at the bottom going into a dropper elevator. So just repeat what we did after the 1st corner. The only reason the 1st section is flipped is to make it easier to change where the input is. Functionally, it all is the same. Only important part is to link the connecting hoppers to the dropper lines, not up high. Items do need to go through the droppers before entering the sorting hopper lines. Oh & you don't actually need any redstone on the corners. So can ignore redstone for the connecting hoppers that are down at the bottom. I did that just as a "better safe than sorry" but have since tested it enough to say that it isn't necessary.

[@KruKyz]

My fancy automated input hopper that has the seeds based on chests is hard stuck on 39 seeds, and I changed it to around 97, how would I fix this??

[@OmLedu]

Hard stuck? Not sure if this helps, but there can only be 5 stacks max in the 2 hoppers combined. But aside from that, the items should always drain back into one of the two hoppers. If items are "frozen" that implies that both or neither hoppers are locked. Did you switch the solid blocks on the back rows that are touching the hoppers on the etho for glass? 13:02

[@KruKyz]

@ that was it!! I took a weird corner and it wasn’t like the one in your video so I had to make a new reset one circuit running to the hopper that wasn’t connected with a torch. Thank you!

[@OmLedu]

@ Noice!! Glad you got it workin :DD

[@Sir.PlopPlop]

Why isn’t the Redstone block retracting back with the piston ? I’m on bedrock so I’m very confused please help me

[@Suriononyoutube]

Same issue with me here!!!!!

[@OmLedu]

@@Sir.PlopPlop I'm confusedd. The redstone block isn't supposed to "retract" with the piston, just be pushed by the pistons. Is it the top one or the bottom one? And is the whole thing (the clock) not turning off or not turning on? If the top one isn't doing anything, (aka the clock never turns off) you need to put items into one of the hoppers that are pointed into each other. 4 items per double chest.

[@OmLedu]

@@Suriononyoutube *Same as above* is the clock not ever turning off, or never turning on?

[@Suriononyoutube]

@@OmLedu I fixed it!!!

[@Suriononyoutube]

@@OmLedu the issue was this! The first bulb needs red stone on it to communicate to the pistons above!! The bulb won’t talk to the torch above!

[@denymaster4559]

when ever i place the repeater down to extend the redstone signal to the other chest, the whole thing just start turning on and off and when i put items in to sort they skip chest. I checked to see if I had more than 14 chest horizontally and i dont I only have 5 chest that go horizntally but with a corner as well on the forth chest, i thought possibly the corner is a extention so that might be the issue? whenever I also try to give them individual reperters it just start turning on and off again. I relized when you put down your repeaters they dont.

[@denymaster4559]

nevermind i got it to work I had a single piece of restone that i didnt see which was creating the continous clicking

[@OmLedu]

@@denymaster4559 Noiceee, easy to miss easy to fix :D

[@rossco0202]

Trying to incorporate this into my base but having issues with the items not filtering to the correct chest. Are you presetting the hoppers for the item allocation?

[@rossco0202]

Never mind, watched your other vid on this and see you have to preload the chests with items. Appreciate the content!

[@OmLedu]

@ Glad you got it situated!

[@rossco0202]

@ now trying to figure out a way to preset the hoppers without having them offload everything I try to set it with lol

[@OmLedu]

@ Preset the hoppers? You'll fill up all the sorting chests with items, 1 in each slot, not the hopperz

[@ΠαναγϊωτηςΓαϊτανης-β2λ]

what texture pack are you using ? i love it

[@OmLedu]

@@ΠαναγϊωτηςΓαϊτανης-β2λ I am using the Defined PBR RTX packs, plus Better RTX. They do interact slightly with vanilla textures even if ray tracing is turned off. Like the clear water pack removes the texture of water even if rxt is off haha But i do like it as well! It keeps things very vanilla, but isn't as dark & hard to see as some other rtx packs

[@camwitt7034]

all of my items are getting stuck in the bottom left hopper when facing the back of the build. idk what to do.

[@OmLedu]

@@camwitt7034 Assuming you mean the 1st dropper after the input; Items don't go past the 1st dropper: The back rows can NOT be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch. If you mean a dropper near the end, either the same problem; Or the signal isn't strong enough to power the dropper. In which case it is the same solution. Or it could be missing a repeater/ dust

[@camwitt7034]

@@OmLedu i meant when you're looking at the back of the build where all the red stone is, it's the main left hopper at the bottom, the furthest away from the input chest!

[@camwitt7034]

it worked at first but then quickly stopped working

[@OmLedu]

@@camwitt7034 Then it's either the same issue where there is a repeater powering itself near the end. Or the signal is not strong enough to power that dropper. Or it is missing dust/ a repeater. No matter which it is, the solution and timestamps will be the sameeee. Look and see if the dust/repeater behind that dropper is off, or if the dust is always on. If it is off, then you'll need to power it. (Or replace what is missing if something is missing) If it is on, then you need to break the infinite loop. 14:18 and beyond, just depending on how many chests you have

[@camwitt7034]

@@OmLedu it is powered but not constantly on, i still can't figure it out. everything is powered correctly. items are just going through the whole system and not depositing in the chests no matter what i do. i'm about to break the whole redstone system and rebuild it.

[@itzluca8601]

For me, the first dropper doenst drop anything? The clock on the bottom works perfectly

[@itzluca8601]

Idk if I skipped anything, but the redstone behind the first chest isnt conected to the other chests and the 1st dropper

[@OmLedu]

@@itzluca8601 FAQ - Common mistakes Items don't go past the 1st dropper- Look at the clock and back rows; If the clock isn't turning on & off then the clock is wrong. If the clock is turning on & off but the back rows are off. Then the clock's torch isn't connected to the rows. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can NOT be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch.

[@itzluca8601]

​@@OmLedu I just made some random stuff and now it works. Thanks!

[@OmLedu]

@@itzluca8601 Noice!! Glad you got er workinnnn

[@jupjooo4636]

Hello i have the problem that my input gets always in the 1. Storage chest, i alr tried it with having same item in thelast storage chest, but its still the same:/ Because at 13:54 you tested it and said it has to go into the final chest

[@jupjooo4636]

Or do i have to fill all chest spaces with 1 block?

[@OmLedu]

@@jupjooo4636 All sorting chests have to have at least 1 item in every slot. Only reason I said to "make sure the item goes all the way" is to test and see how many items need to be in the etho clock so that no items remain idle in the back. If 1 item that isn't being sorted is placed inside & makes it all the way to the 1st chest with empty slots, then all items will make it all the way through without any being left idle. Not a big deal either way though, just load up all the chests you want to sort, then give it a test.

[@jupjooo4636]

@@OmLedu ahhh okkkk so everything worked thank uuuuu^^

[@OmLedu]

@@jupjooo4636 Awesomeeee. Glad you got it workinnn

[@joschaschirrmeister4827]

What if i have two corners do i put my hopper on the right or left side? at the second corner...

[@OmLedu]

@@joschaschirrmeister4827 Doesn't matter! Droppers on the side closest to the connection is the easiest. Only reason the 1st section is reversed is to make it easier to change where the input is.

[@KG-si5mw]

I cant get any signal at all going to my redstone along the back row im 99% sure im doing everything correctly but not sure why i have no luck with this

[@OmLedu]

So the back rows of dust are not receiving any power? They just connect to the torch on the clock 14:18 Of if the rows are all powered but the clock isn't turning on & off: If the clock is always on make sure the comparator is on subtraction mode and that the repeater is pointed into the side of the comparator. If the clock is always off then the problem might be with the activation stuff. (the stuff that powers the clock, ie the pistons, redstone blocks, bulbs etc)

[@J9A9Y9]

I have the clock working, my chest are 7 high and 6 wide, so I added the next repeater on the glass tower.. and they all light up repeatedly like the clock. It seems like yours are just solidly on. I am not sure what I have done wrong. 7 high, 6 wide. Any ideas what I have done wrong? I feel like I have triple checked everything.

[@OmLedu]

@@J9A9Y9 What is it not doing? The redstone will all be on if the clock is off. But when the clock is on it should all turn on & off. If the clock is turning on & off but the back rows are off. Then the clock's torch isn't connected to the rows. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can not be connected by repeaters & dust. Either or, but not both. 14:18 dust if the rows are short enough to be powered 14:28 repeaters & no dust if the rows are too long to be powered from the torch. If your rows are turning off and on with the clock, that is correct.

[@J9A9Y9]

@ oh ok.. then it is correct. I thought the would just be on red until something was dropped into the chest. Thank you!

[@OmLedu]

@J9A9Y9 The clock should be off until items are put in to be sorted. Then it will turn back off after the etho timer counts down once the 1st dropper is empty. It might be on at first just from building the stuff. But once u put items in and they process it should turn itself off. If it never turns itself off then something is wrong around the top section. Either the etho isn't counting, or it isn't triggering the lower RS latch to turn off the clock.

[@J9A9Y9]

@@OmLedu I deleted the other two messages because they are now not needed, I found a silly mistake and fixed it. However, the problem I now have is that all of the items are running to the last chest, even if there are those items in other chest where I want them to stop, but they keep going to the end.

[@OmLedu]

@@J9A9Y9 If no items at all are being sorted, the clock is not on a 5 tick delay. 1 max repeater and 1 with no extra delay. If some items are being sorted then it's probably overlapping signals. 15:46

[@dustinhaney8477]

So I’ve got the machine built my room is a solid chest cube but I’d like to elevate the input chest in the ground floor of my home not in the basement how can I offset the red stone and I put function

[@OmLedu]

@@dustinhaney8477 I'm a little confused & sleepy, so let me know if this isn't what you were asking. But you just build the input any height that you want. Then just build the redstone where the comparator is. The redstone will be exactly the same regardless of where the input is. Just start with that comparator next to the input's 1st dropper. Oh if u just want to lift the input chest up much higher; u can just run hoppers from the new location down to the dropper with the comparator. Wouldn't have to move any of the redstone doing it that way. Just think of the extra left dropper (the one next the the comparator) as the input. So any hoppers or chests can be run to that dropper from anywheresss.

[@KyleDavis-j6i]

I made one that has 3 rows of 3 chests but there are two additional hopper between each slice that I put there for spacing. All of the chests will sort except for the last two chests in the final row. Any ideas? The items are going entirely through the system and end up in the overflow.

[@OmLedu]

Extra hoppers for spacing? Like between each individual chest row? If it is skipping an entire section I would guess there are multiple things powering that last section... Items consecutively skip random chests - 15:46 There can be no overlapping signals powering the back rows, no extra repeaters. If using more than 14 chests in horizontal rows, the rows must be sliced into individual sections powered by singular repeaters. Hope that helps! If not just let me knoww & we shall figure it outt

[@Trey-h1j]

I’m confused as to how to wrap it for the second time with the hoppers being on the left?

[@OmLedu]

It really doesn't matter either way, but just do it exactly the same as the 1st corner. The only reason the very 1st section is 'flipped' is to make it easier to change where the input is. All that matters is the corner hoppers are connected at the bottom into a dropper elevator. The corner hoppers don't actually even need redstone, just the hopper/droppers directly behind the chests.

[@Trey-h1j]

@ ohhhh so the one that literally ROUNDS the corner does not need a block/redstone but the one before/after do

[@Trey-h1j]

Def subbin bro plus ur skin is dope

[@OmLedu]

@@Trey-h1j Yussss. I had people add the redstone to it in the video just as a "better safe than sorry" But since then It's been tested enough for me to safely say that it is totally irrelevant. Same with the glass actually too. I was worried that lag might double activate droppers on occasion if we didn't have glass behind the droppers, but that never actually happens :D & tysm!! Glad you like! Ngl i get more people asking what is wrong with my skin, or telling me I should change it X]] so I appreciate the little elephant getting some love XD

[@ColbyKissane]

I built it the same way you did in the video, but my first column of chest is the only column getting filled everything else drops out the hopper behind the bottom left chest instead of getting sent through

[@OmLedu]

@@ColbyKissane drops out of the hopper? As in you used dispensers instead of droppers & the items are going onto the ground instead of the next row? Or a dropper is spitting the items onto the ground because it isn't pointed into a container? Or as in the items are staying inside the bottom hoppers because the redstone lines aren't ticking? If it's the items are stalling inside of the hoppers/droppers, then it's most likely an infinite loop cause by connecting the rows with both repeaters and dust. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can not be connected by repeaters & dust. Either or, but not both. 14:18 dust if the rows are short enough to be powered 14:28 repeaters & no dust IF the rows are too long to be powered from the torch.

[@ColbyKissane]

@@OmLeduthank you! It wasn’t that row but I had another row I accidentally did dispenser. 👍🏼👍🏼

[@OmLedu]

@ColbyKissane Noicecece!! I do that all the time as well XD they look so similar! I wish 1 had a different texture haha Glad you got it sorted :DDD

[@ColbyKissane]

@@OmLedulmaoo they really do look super similar I even have a texture back loll, really appreciate the help I was about to redo all my redstone. Instead just switched one block XD!!

[@OmLedu]

@@ColbyKissane Anytime! Super glad it was an easy fix

[@yahiko7448]

So my observer on the fully automated part is facing down but the lines on the top and bottom are on the sides instead does this matter please help. Edit: it didn’t matter it still worked. THANK YOU SO MUCH FOR HELPING ME BUILD MY FIRST REDSTONE MACHINE

[@OmLedu]

Noiceeee! Glad it worked

[@yahiko7448]

@@OmLedu I subbed thanks for the help. I’ll definitely build more redstone in my new world

[@OmLedu]

@@yahiko7448 Yay!! Awesome!! Thank you so much :DD super glad you enjoy!

[@TankTheTank28]

My items are just stuck in the dropper behind the input chest. The pistons move and stuff but the items just… stay there

[@OmLedu]

Either your 1st hopper is 1 block too low & isn't being powered by the dust (common alteration) or: Items don't go past the 1st dropper- Look at the clock and back rows; If the clock isn't turning on & off then the clock is wrong. If the clock is turning on & off but the back rows are off. Then the clock's torch isn't connected to the rows. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can NOT be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch. If the dust is turning off & on, but the 1st dropper is not directly adjacent to dust: run extra dust from the back part of the rows over to the 1st dropper.

[@TankTheTank28]

@ okay thank you so much! I will try these out in an hour or so and report back which fix worked!

[@TankTheTank28]

Ok so at 15:33 when you say to put red stone under the torch, I realize that is a solution that I need to apply to my build, except for the fact the placing red stone there will connect the two back rows to each other. For example my chests are arranged in a 3x3 grid, so the red stone is so close together that this happens. I assume that I will need to expand in order to make this work

[@OmLedu]

@ You should be able to just skooch the torch over by a block :D As long as there is dust on the block the torch is on, it can be on any of those sides/blocks. Or! Place the connecting dust next to the torch rather than under it.

[@TankTheTank28]

@ Ahhhhh okay! I will try this out a let you know! I did consider moving the torch over but I am not Mumbo Jumbo lol, I don’t want the mess up the whole circuit with one movement.

[@benrappleye6043]

Correct me if I'm wrong, but couldn't we allow the items to move faster around the corner without causing any problems by not placing the redstone torches and solid blocks on the hoppers in the corners here? 5:46 If so, this would help especially for those using a simple input to prevent more items from being left inside the machine

[@OmLedu]

@@benrappleye6043 Yes I would assume that would be fine. Tbh I just never actually tested it to see & went with a "better safe than sorry" approach lolol But the more I think about it, the more it should just behave like the input droppers. So it should be totally fine!

[@wolfeytbonegamingfun505]

So… a day later I realize not putting glass disables my torches…. And I have no comparators.. but it’s at least dropping my items in the droppers, but I have to dis-engage my redstone torch to get I moving….

[@OmLedu]

@@wolfeytbonegamingfun505 Not putting glass doesn't affect the torches. The glass would exist adjacent to the torches, which torches don't interact with. The torches will all turn off if the back rows are all turned on. & if you have no comparators but built everything else then the back rows will most likely be powered. The comparator will be needed to create a clock to tick the redstone on & off to power the droppers and alternate the hoppers

[@Kampfpanzer-Luchs]

Is it important to use copper blubs that are glowing ? Or have oxidised ?

[@OmLedu]

Nope, oxidation level doesn't affect copper bulbs at all. & It doesn't matter if they start 'on' or 'off'

[@Kampfpanzer-Luchs]

@@OmLedu 🙏💪

[@OmLedu]

@Kampfpanzer-Luchs 🎈🎉🥳🎉🎈

[@xekeys]

I have built this the same way and items are skipping the chests they are designated too. Help 😬 Great video nonetheless.

[@xekeys]

8 chests long 5 high, and using the repeater method in the middle. Only 2 repeaters to between the three rows. Not using dust and repeaters.

[@OmLedu]

@@xekeys How often are they skipping? So no overlapping signals... the rows are aligned with the bottom & 1 down from the top..... & the clock is on a 5 tick delay? Uhmhmhmhm could one of the connecting repeaters have an extra delay? Is the world super laggy? If it skips allot and none of those are the answer, join my dizcord and post some pics! If it only skips a few items it cooould be from leaving the area while it's sorting..... & does it skip the same chests each time?

[@xekeys]

@@OmLedu Oh my goodness! I added more chests and forgot to add Redstone torches between the glass blocks… So stupid haha!! It works great now thank you

[@OmLedu]

@@xekeys Awesomemememe >

[@jonasseese7848]

brother i neeed help i build this and its not working right. my set up is mirrored from yours so that didn’t help, but my items are only making it into the sorter chests around 40% of the time. i think i have a timing error but i don’t know how to fix it.

[@OmLedu]

@@jonasseese7848 Items consecutively skip random chests - 15:46 There can be no overlapping signals powering the back rows, no extra repeaters. If using more than 14 chests the rows must be sliced into individual sections powered by singular repeaters.

[@jonathanHernandez-uz9ug]

Ive look for an answer in the comments but there is nothing. I have a problem where they only make it to the top unused chest or if I run it with the lever it get sent to the last chest. i have all chest with an item yet they dont get sorted.

[@OmLedu]

@@jonathanHernandez-uz9ug hmm sounds like the clock isn't set on a 5 tick delay. If they are skipping every chest; either the clock is not on 5 ticks, or the redstone lines have overlapping activations. Make sure your clock down at the bottom has 1 repeater on max delay, and 1 repeater on no delay, with a subtraction mode comparator. & that your rows are only being powered from a single source. No overlapping and no extra repeaters (You are on bedrock correct?)

[@jonathanHernandez-uz9ug]

@@OmLedu no i am on java i see my problem now Thank you lol

[@OmLedu]

@@jonathanHernandez-uz9ug Here is the java version lol Most of it is the same at least! So won't have to totally rebuild. kzbin.info/www/bejne/q5_EZ3yarad7eJY

[@Hpyo32]

Hey so my items are not grouping up I don’t know why?

[@OmLedu]

not grouping up as in they are skipping chests? If yes: Items consecutively skip random chests - 15:46 There can be no overlapping signals powering the back rows, no extra repeaters. If using more than 14 chests in horizontal rows, the rows must be sliced into individual sections powered by singular repeaters. If no, then lmk more about what it is or isn't doing.

[@fischman42]

I made mine in a “U,” shape, 5x5 on each side (75 chest total), when rounding the corner to the third side would the hopers also go on the right side of the chest? And how would putting the solid blocks on the 2nd corner work since there would be one less hopper than the first corner?

[@OmLedu]

@@fischman42 When turning any corner just have the hoppers at the bottom going into a dropper line. Only reason the dropper/hopper lines flip the 1st time is to make it easier to customize where the input is. But it doesn't actually matter as long as the connecting hoppers are at the bottom going into the dropper elevator. You also don't actually need any redstone on the connecting hoppers. That was more of a "better safe than sorry" but I have since tested it enough to find that it is irrelevant. So just have the redstone for all the hoppers & droppers that are actually behind the chests. Ignore the redstone for the corner hoppers that go from the "last" hopper to the "first" dropper. Connect the last hopper line on the last row of sorting chests to the bottom of the 1st dropper line behind the next sorting chests & repeat

[@fischman42]

@@OmLeduI “finished,” building it but all of the items go to the top left chest instead of going to the bottom last one, any ideas?

[@OmLedu]

@fischman42 Every slot of every chest has to have at least 1 item in it for a slot sorter to sort.

[@denymaster4559]

Items arnt getting passed through first hopper from the first chest and I’m almost 99% sure I build the clock right any help? Or suggestions

[@OmLedu]

@@denymaster4559 As in the very 1st hopper under the input chest is locked so items aren't going into the 1st dropper? If yes, that hopper is probably on the right side of the input chest. Needs to be on the left side. Or if that 1st hopper isn't locked maybe you mean; Items don't go past the 1st dropper- Look at the clock and back rows; If the clock isn't turning on & off then the clock is wrong. If the clock is turning on & off but the back rows are off. Then the clock's torch isn't connected to the rows. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can NOT be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch.

[@Bretista]

The hopper clock should push that redstone block back and forth right? Mine isnt

[@OmLedu]

@@Bretista Mb, just saw your comments. Did you get it figured out? The pistons will only activate once when the dropper 1st receives an item, then again after the dropper becomes empty. (After a delay)

[@Bretista]

@@OmLedu yup! Works like it's supposed to now. Thank you!

[@OmLedu]

@@Bretista awesomeeee

[@GamerZ6956]

Im having issues with the bottom imput sorter, it stops at the first dropper and doesn't keep going, what am I doing wrong??

[@OmLedu]

@@GamerZ6956 Either the clock is not clocking, is not connected to the back rows, or there is a looping signal. Look at the bottom clock and the back rows. If the clock isn't turning on & off, then the clock is wrong. If the clock is turning on & off but the back rows are off, then the clock isn't connected to the rows. If the back rows are constantly on and never turn off, then you have dust and a repeater connecting the clock to the rows. The back rows can not be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust if the rows are too long to be powered from the torch.

[@GamerZ6956]

@OmLedu Ohhh alright thanks, I'll work on it tomorrow and see if I can fix it, thanks a lot

[@OmLedu]

@@GamerZ6956 Yeryer!! Lmk what you find out & we'll get er fixed >:D

[@GamerZ6956]

@OmLedu I will let you know for sure

[@GamerZ6956]

​@@OmLedu I did it man, thanks a bunch for helping me out, it was the Redstone part in the back which really made me confused, thanks a bunch again

[@brekerr9323]

So I’m struggling as all items are getting stuck in the second to top left chest. Any ideas?

[@OmLedu]

Every slot of every sorting/storage chest must have at least 1 item. Any empty slots will just allow any item to enter it.

[@brekerr9323]

@ thanks!! This worked! This is my first bigger red stone build, thanks for the great help!

[@OmLedu]

@brekerr9323 Noicecece that's awesome! Glad you got it working, and congrats!! It's always exciting to finnish redstone contraptions

[@Fairyshifts7007]

For some reason my clock seems to work but the first dropped just keeps it and doesn’t push it into the chests. So it just sits in the dropped after I put it in the hopper and I’m not sure why ? I’ve re watched a little and still am having trouble. Does anyone know what the possible problem could be?

[@OmLedu]

@@Fairyshifts7007 Are the droppers clicking on & off? If no: the back lines are most likely being powered by connected dust & a repeater thus creating an infinite loop. Pinch or move the dust so it's only being powered by the repeater. If yes: then check that there is a dust pointed into the dropper next to the 1st dropper. Either the signal isn't strong enough to power that dust, or the dropper is being powered by something else.

[@Fairyshifts7007]

@@OmLedu thank you :) I got it to work, it helped to also re watch a different part of the video because the part I got wrong ended up not being the thing I assumed I messed up at 😭I appreciate your help sm

[@OmLedu]

@@Fairyshifts7007 Awesomeeee

[@BrundleHundle]

The dropper at the start of the system isn't getting powered. Did I miss a step?

[@OmLedu]

@@BrundleHundle FAQ - Common mistakes Items don't go past the 1st dropper- Look at the clock and back rows; If the clock isn't turning on & off then the clock is wrong. If the clock is turning on & off but the back rows are off. Then the clock's torch isn't connected to the rows. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can NOT be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch.

[@BrundleHundle]

@OmLedu I figured it out. Ended up just connecting the first dropper directly to the clock, as it wasn't receiving power. Outside of that, all the rows, hoppers, and droppers, aside from that were going off correctly and receiving power

[@OmLedu]

@@BrundleHundle Glad you got er a workin

[@larryvargas9802]

Wait how do i connect the spacer? Similar to the corner? I have 14 blocks on one side, 12 on the other

[@OmLedu]

@@larryvargas9802 if you only have 14 blocks 1 way and 12 the other, you won't need a spacer :] just have the repeaters in the center, 15 dust away from the farthest dust. But just incase; for the spacer, yes same as corners. Just have hoppers down at the bottom connecting the hopper line & next row of droppers (the connecting hoppers don't actually need redstone) Break all the rows behind that spacer, so the only things there is that hopper at the bottom. Then have the glass tower+repeaters for both sections to power all the rows. Then just connect those glass towers with some redstone. The towers can be connected, just not the rows. Hope that makes sense! If not, or if it gives you trouble, feel free to post some pics on my discord & I'll help you out :D

[@larryvargas9802]

@@OmLedu thanks for the reply! I didnt even check my inbox and you got back to me fast. Appreciate you 😁

[@OmLedu]

@@larryvargas9802 Anytime!! Always happy to help :D did you get it a workinnnn?

[@TheJunglebo0k]

@@OmLedu This is a great tutorial! However, I am not following the spacer set up. I thought I had it, but it flips the side of the chests the hopper is on and then the corner doesn't seem right. Also, I might be dense, I don't know what you mean by glass tower. Sorry for my confusion, would love help if you're still reading these!

[@OmLedu]

@@TheJunglebo0k Spacer as in the break in the stuffs? Just add an extra hopper at the bottommmmm. So the break just has an extra hopper connecting the hopper line to the next dropper elevator, no redstone behind that connector hopper. & the glass towers is the zigzag glass we use to run redstone up to the repeaters for each roww. Hope that makes sense! If not let me knowwwww

[@AirDusterLover]

Can you have breaks in the chests or longer corners? I want this to be a part of an elaborate room. I haven’t tested it myself by building in creative. But I’m hoping I can make space for staircases by just adding a long line of hoppers.

[@OmLedu]

@@AirDusterLover Yessss. Having breaks actually helps split it into sections & avoid overlapping signals. You don't actually even need to power the connecting rows of hoppers like I did on the corners in the video. (That was just "better safe than sorry") Since then I've tested it more & it is irrelevant :> All in all, yes you can just connect sections via a hopper line. Just run that hopper line at the bottom not the top, so that it goes through the dropper elevators before the sorting hoppers. (That just ensures the items get realigned with the clocking) Then just connect all the sections to the clock of course, but don't worry about redstone on the connecting hopper rows that don't have sorters in front of them.

[@AirDusterLover]

@ thank you soooooo much. We already love a bedrock redstoner as is. But we further love a channel that helps the people in their comments too.

[@OmLedu]

@@AirDusterLover Yussss I try!! Been a little slow to reply lately with the holidays. (Plus I may or may not be tweaking out on age of empires 2 atm) >.> lololz But always happy to try & help :DDD

[@churgerr2820]

I can’t get mine to work. I did have to use 2 repeaters to get signal to everything. But I can’t get any of my items past the first dropper after the input chest. Checked that the droppers are oriented correctly and already rechecked my input build. On Xbox 1.21 🤦🏼‍♂️

[@OmLedu]

14:17 Most likely, you have dust and a repeater connected to the back rows. Needs to be either or but not both. Pinch or the dust that is connect. And since you had to expend the signal, be sure there is no overlap on the rows from different repeaters. Each "vertical row" of repeaters has to power it's own completely separate section

[@churgerr2820]

@@OmLedu thanks man. Don’t really know what I did but I realized things were getting powered that shouldn’t and just broke things and rerouted them until it worked lol. Your spot on though I ran a repeater extension at the front then ran another separate line of red stone at the very front but once I got rid of the separate line and had the main power run to my first repeater tower everything started working. Your awesome 🤙🏼

[@OmLedu]

@@churgerr2820 Niceeeee glad you got it figured out!!! Sorry about the late reply :< normally im faster buuuuut youtube didn't send me a notification for a bunch of comments haha

[@maxvitucci9132]

The items dont leave the first dipenser of the input system? Do you know why this could be?

[@OmLedu]

@@maxvitucci9132 Items don't go past the 1st dropper: The back rows can not be connected by repeaters & dust. Either or, but not both. 14:18 dust if the rows are short enough to be powered 14:28 repeaters & no dust if the rows are too long to be powered from the torch.

[@-kaitlyn.hshs-]

The items dont go past the first dropper, and yes i did already read the pinned comment and none of them have any problems, my clock is turning on and off, the back rows is turning on and off, i js dont know why its not working?? Im on bedrock btw

[@OmLedu]

@@-kaitlyn.hshs- hmmmm let's see!! So the dropper next to that very 1st dropper has dust pointing into it correct? & that dust is definitely turning on & off? If there is dust pointing at the dropper riiiight next to the 1st dropper, it would have to be that dust is never turning on. Like it is too far away for the signal to reach. Or it could also be that the input is 1 higher or lower than shown so there is no dust powering the dropper directly adjacent to that 1st dropper. If that is the case, either raise or lower the input by 1. Or could prolly add another dust line to power that 1st dropper. If none of that helps lmk, or hop over to my discord and post some picturez

[@-kaitlyn.hshs-]

@ Alrrr!! Ill check tmrw cuz its abt to be 12am but tysm!!

[@-kaitlyn.hshs-]

@@OmLedu Okayyy soo idrk how to explain it well but its the dropper that the comparator is facing, at the beginning of the low chest part of the vid, the first dropper that is placed. Idk if u got it but if u didnt its the one near the chest where u put all your junk to get it sorted out, and the hopper below it is connected to that dropper. I didnt really look at your comment thoroughly bc im rlly tired but i js forgot to say what dropper it is, A more detail explanation of whats happening: The one near the chest where u put all your junk to get it sorted out, and the hopper below it is connected to that dropper. That dropper is the one im having problems with because the items is just getting stuck there (btw i did try this on a test world and i was too lazy to fill up all the chests in with items but I did fill up one chest with the item i tested it, idk if this is useful but js extra info) I suck at redstone but i do try my best to understand lol i also suck at explaning but hopefully this makes sense, if not i can js send pics in discord so yeaa Edit: I also tried doing the fancy input thingy thing

[@OmLedu]

@@-kaitlyn.hshs- Oh it's one of the droppers in the vertical rows, not the very 1st dropper off to the side? If it's a vertical row's dropper then it has to be; The redstone isn't strong enough to power that section. Or the back rows are misaligned. There should be dust pointed into the dropper above the bottom most dropper. Look at that dust while the clock is on & see if it is always off.

[@-kaitlyn.hshs-]

@ Wait im getting lost ill js check today on which one and see if it works, its the one with the comparator fscing the dropper and that dropper is facing the vertical row of dropper (idk if it makes sense but yea) but tysm again ill try it!

[@felixdossing6501]

Mine doesn’t allow me to place redstone on the piston + it immediately gets activated

[@OmLedu]

@@felixdossing6501 You're on java. Here is the java version kzbin.info/www/bejne/q5_EZ3yarad7eJYsi=WluTm96PTdWD8nno Basically the same just no fancy timer and more repeaters.

[@felixdossing6501]

@@OmLedu ohhhh okay thx a lot

[@OmLedu]

@@felixdossing6501 Yeryer! So sorry! But at least it is basically the sameee

[@rusebee7652]

Hi! I’m trying to connect another corner but since we swapped the hoppers to the left the solid blocks connected to red stone are right next to a row of droppers on the RIGHT (from the back)(so there are no hoppers on those chests at all) of the chest, also do I swap back to the right for the hoppers on the third wall?

[@OmLedu]

It really doesn't matter, but no dont flip it anymore. Just do exactly what you did on the 1st corner for the 2nd 3rd 4th 5th etc. The only reason the very 1st section is "flipped" is to make it easier to customize where you want your input. It doesn't matter where the dropper elevators are. All that does matter is: Hopper lines pointing into each verical row of chests. Droppers connected to hoppers via upper chest. Redstone powering all droppers & hoppers that are behind chests. (the connecting corner hoppers don't actually need redstone) The connecting corner hoppers need to be run at the bottom so that they go through a dropper elevator before entering the upper connecting chest.

[@rusebee7652]

@ Thank you So much! Amazing build btw ❤️❤️

[@rusebee7652]

It worked! But now items are getting stuck on the left top chest (and yeah, the red stone is clocking) any tips?

[@OmLedu]

@@rusebee7652 Let's see, the top left chest as in the top left sorting chest? Every slot of all the sorting chests have to have at least 1 item in them. The way slot sorters work is; it tried to push a single item into each chest one at a time. If it can't, the item goes to the next chest/hopper & repeats. So if there is an empty slot in the chest then any item can get pushed inside.

[@rusebee7652]

@ oh!!! Ok! Thank you l! I’ll fill them up then! ❤️❤️ ur so nice replying to all of ur subs questions tysm

[@Balonsercole]

Im a little confused for when you want to make it wrap around a third time. Should i place the hoppers and droppers the same way as the second turn?

[@OmLedu]

Doesn't matter. Just do it exactly the same as the 1st corner/ 2nd section. Only reason the 1st section is "flipped" was too make it easier to run the input chest high/low

[@georgestrachan6869]

I built this system 5 chests tall, for some reason the items aren’t stacking in the 4th chest from the top, can’t figure out why. Everything is the same as in the video.

[@OmLedu]

uh oh, let's figure out what the problem iz. So the chest next to bottom isn't working, but all the others are? Is that for every row or just a single chest? I would start by double checking that there is a torch & dust behind that general area. (on the redstone rows in the back) dust on the glass & torches on the side. If it's just a single chest i would guess a dust or torch got broken or is missing. If it's an entire horizontal row, then that redstone line in the back is most likely off timing, meaning that either some of the repeaters have extra delay, or that there are extra repeaters. Check the repeaters on the glass tower that are powering the rows. make sure none of them have any delay

[@nathanw9]

My items won’t leave the first dropper, any idea? I built it 7 high, high input

[@OmLedu]

14:17 Most likely, you have dust and a repeater connected to the back rows. Needs to be either or but not both. Pinch or the dust that is connect.

[@meatball6371]

I am currently having trouble with the complex version, when I turn on the back portion turn on and off and when I turn off it the back portion stay on for a little bit but it’s seem like the items are getting stuck in the first drop in the input chest. I also test just putting in the system without the input chest everything seem to get stuck in the first column of it. If you could explain where i could’ve have went wrong that would be great :) I can join the discord if you need a video.

[@OmLedu]

So, items are not going past the 1st dropper? Or the clock isn't activating? Items don't go past the 1st dropper- Look at the clock and back rows; If the clock isn't turning on & off then the clock is wrong. If the clock is turning on & off but the back rows are off. Then the clock's torch isn't connected to the rows. If the clock is turning on & off, but part of or all of the back rows are just 'on' & never turning off: The back rows can NOT be connected by repeaters & dust. Either or, but not both. 14:18 dust IF the rows are short enough to be powered 14:28 repeaters & NO dust IF the rows are too long to be powered from the torch. If that doesn't help, can always pop over to the discorddd

[@meatball6371]

@ sort kinda, I post my question in the discord

[@thegreedyrock368]

My items only go into the 2nd chest of my storage system, it seems to be working fine until i get to that chest and then all items just flow into it

[@OmLedu]

@@thegreedyrock368 every slot of every chest must have at least 1 item in it. Except for the chests at the end that contain your overflow

[@chelvin8349]

Hello! I built it exactly as instructed - my items move from the input chest through to the first chest on the top left, then they do not move any further. What do I do?

[@OmLedu]

@@chelvin8349 The items stay in the top most chest that connect the droppers and hoppers together? Or the top most sorting chest in the front? The front facing chests all must have at least 1 item in every slot. No empty slots at all. Except the chests on the right side can remain empty to act as overflow. If the items stay in the back top most connecting chest. Then that hopper is never unlocking. Which means something is wrong with the top row of redstone.

[@chelvin8349]

@@OmLedu I was just being stupid. I didn’t realize that I would have to fill every item slot in order for it to reach the last chest. My only problem now is that the top two chests on the very right side are being skipped.

[@OmLedu]

@@chelvin8349 Oh, easy fix goood good. But also oh no! Hmmm just the top 2 on the final row?... that's odd.... is there torches and dust behind those? Torches behind hoppers dust behind droppers

[@mrjacob3519]

I’m trying to do a room of chest on all sides but the third corner isn’t lining up to just duplicate it

[@OmLedu]

@@mrjacob3519 Isn't lining up? Not sure what you mean exactly. Use hoppers on the bottom to send the items from 1 side to the next, into the tower of droppers behind the 1st sorting chests of each row. Think of it like; droppers go up, top chests connect the droppers & hoppers, & the hoppers go down and load items into the chests. So as long as the item stream is unbroken & there is 1 row of hoppers per row of chests it will all be fine. As for the redstone, the corner bottom hopper line doesn't technically need redstone. So just be sure to split each all into it's own section. & make sure the top most torches are aligned with the 2nd sorting chests from the top not the 1st.