Multifunction Switch Replacement

[@kirkbenefiel8920]

Ive been watching your stuff since i traded a roof job for a 96 saturn. Ive just subscribed thank you so much!

[@RichpinTv]

Thank you for subscribing to my channel.

[@mikebidus7166]

Plain and simple. You rock! You take the mystery out the how to. How to avoid the pitfalls like you did with the airbag coil. Thank you so much!

[@TimVanBergen]

Man, you are good at these video tutorials. Your clear matter of fact direction and excellent video lighting and perspective makes each one of these projects a no brainer. Only had to make two trips to the auto parts store this time: one for the wheel puller, and one to buy a spare 5.5mm that I could grind down. Everything else went perfectly. THANK YOU. This video easily saved me $250 in mechanic shop parts and labor.

[@RichpinTv]

Tim VanBergen I am glad you could grind a 5.5mm socket down.I have one in my toolbox just like that.

[@TimVanBergen]

richpin06a Its almost as if the engineers at Saturn either overlooked the necessity of future repairs and molded in a super small deep hole, or they did that as the key to keep people from mucking around with the steering column and controls. Boy, I'll tell you what. I sure did handle that air bag gently. I could just imagine that thing blowing up in my face.

[@LSJUAN]

I see. Well thanks for the great videos. I used to own a gen 1 s- series and i regret selling it. It was the easiest car to work on. It had over 247k miles and it ran like a champ.

[@oneluckydude]

This is about the 4th time one of your videos has helped me. Thank you so much for sharing!

[@TheHolyGhost777]

Yup, me, too!

[@RichpinTv]

@dleeret no bigy it just has to be recentered.Rotate the center hub clockwise all the way til it stops then rotate it counterclockwise all the way till it stops counting the turns as you go.Now turn it back clockwise half the turns you counted and now your coil is centered.

[@RichpinTv]

I am glad you found it helpful. Important Update: Jan 2013 there will be a new richpin channel for all future videos.Richpin06a channel will be mainly for all the Saturn lovers out there.Should be a lot of fun so stay tuned.

[@RichpinTv]

@nobodyisname Clubbin thats a good one...lol The stamp is from the wrecking yard.I think my next video will be how to check a 98-02 Saturn range switch.

[@sportpilot]

Hi Rich. I can't thank you enough for making this video. It/you helped me change the turn signal/wiper unit on my '98 Saturn SL2. And saved me a LOT of time. Thank you again. John D.

[@hawke232]

Thanks for the detailed vid's. You do a great service to the remaining saturn owners. Do you just go to the junkyard to do videos or are you actually fixing these parts? I go every now and then to explore other saturns just to see what they look like inside or get an idea of how difficult something is on my actual car.

[@patrickgietzen8726]

I just used your video ti change out my switch! Great video. I would suggest using a nut driver to remove the deep set cover screws and the screws for the switch. Much easier. Your video was spot on! Great Job. Piece of cake after watching you!

[@olenaerhardt7725]

Why do we need to disconnect the fuse as we disconnected the battery already? And @ 2:45 you mention special grounded out 5.5mm socket. Did someone grounded out that socket or you can by that type of socket? Can you substitute it with just deep socket? Thank you for the film.

[@RichpinTv]

@gst69man Yes the red socks did add a little touch didn't it.

[@RichpinTv]

@jardner2 I would think it is basically the same for most vehicles.I have not worked on a vue so can not give you any info on that one.

[@malibu3764]

Just used your video to help me replace the multifunction switch on my SW2, couldn't have done it w/o you, thanks!

[@gst69man]

good vid and Merry Christmas.. How does one insure that the air bag does not go off while working on it. In the past I have disconnected the battery and the yellow connector, but wonder if thats safe. Thanks

[@spelunkerd]

Ha ha Rich, love those Christmas style red socks! Another great video to cap off the year. I always wondered how this comes apart, thanks for posting.

[@SuperDragonWagon]

Hi again Rich ,The stalk is broken at the inside . thought you might need that info.wiper works, however i should replace the stalk . thanks again Steve

[@RichpinTv]

I will put it on my video to do list for a Saturn L.

[@mtlh05]

Im kinda glad to see another Saturn video... especially after that horrid Ford Escort!

[@RichpinTv]

@hooptyme1967 You have to remove the instrument cluster to replace the dash bulbs i have videos for this.

[@m6onz5a]

Yep a thin wall 5.5 socket is a must. Great info. Thanks for the video.

[@sm870621345]

If you guys have a hard time finding a 5.5mm nut driver, try looking at a RC hobby shop, they usually have those smaller sizes. Also, 7/32 is the standard equivalent.

[@stuntz0rZ]

How would you go about fixing windshield wipers that stay "up" when turning the switch off? I noticed the wiper switch in my 2000 saturn ls1 was loose and out of place and had to push it into place. but that didn't seem to do it ?

[@marykinz8381]

Hey rich love the video. Ok so here's my problem I've got steering wheel and the air bag coil off. But, I can't find a socket anywhere that will fit in the hole to get the three screws for the multifunction switch off. Any suggestions?

[@TylerMaiura]

Rich,this really necessary to replace the multifunction switch? can't i just take off the housing and replace the switch without remocing the steering wheel? Is all

[@RichpinTv]

@crystalscan2002 It did not look like it was in an accident so it must have been a mechanical issue.

[@jderry1993]

How does one go about tightening the aluminum bracket that the multifunction switch is mounted to?

[@RichpinTv]

@gst69man Disconnect the battery then the air bag fuse and wait at least half hour and you can remove the bag.

[@dale3858]

If I was to take it to a mechanic, how long should I expect the whole job to take? Thanks...

[@dleeret]

Rich - what happens if the coil turns? I removed mine before watching this video and did not tape mine (had to replace the ing switch). Do I need to replace it or ??

[@omarG19100]

@richpin06a very nice. there something loose around tht area tht rattles a bit so mabe i can get in there to check it out.

[@RichpinTv]

@munoz4415 I tried to remove the steering wheel on two cars without success because i did not have my puller with me.The next day i returned with the puller and did the job.

[@crystalscan2002]

@richpin06a whats wrong with that saturn that in the junkyard? how many miles where on it

[@shane1112h]

Hey Rich, I have a 1999 Toyota Camry LE and I'm having trouble with changing which direction the air flow through the vents, any suggestions or video to fixing the problem?

[@mikebigham1718]

if its just a loose wire do you have to remove everything?

[@RichpinTv]

Depends were the loose wire is.

[@jsande7828]

@richpin06a At 6:43 of video, what is that tool you're holding, and where did you get it? This is where I'm stuck. I cannot find a socket to fit in those holes

[@RichpinTv]

+jsande7828 That is my special ground down 5.5mm socket.Try searching for a 5.5mm nut driver

[@Win5ston]

7/32 works just as good and easier to find

[@dlkramer88]

Harbor Freight has a flush 1./4 drive 5.5 mm in the magnetic nut setter kit - $6 - that worked fine. I couldn't find a deep socket either.

[@m6onz5a]

I replaced mine last year thanks to this video. Everything went smooth except for one thing. After the repair my windshield washer now sprays constantly. Did I get a bad switch? I had to disconnect the plug at the washer bottle. The reason I replaced the switch is my wipers would intermittently turn on.

[@pobedaGAZm20]

@Richpin06a One thing I would add is that anyone trying to pull off a steering wheel like you did should have the nut on a few threads first ! I lost a front tooth doing something similar with a gearbox casing.

[@brnchk44]

By any chance would you have a fuse layout from the lower side panel? I have a 1998 Saturn wagon that's missing the side panel that covered the fuses. Thank you.

[@RichpinTv]

I did a quick search and found this one thosbryant.wordpress.com/2014/01/04/saturn-fuse-box-1998-1999/

[@nobodyisname]

This looks about as friendly as changing a coolant temp sensor on a vw passat. What's up with the hand stamp at 5:37, Rich be clubbin? I think Rich has now shown us everything on a saturn s-series but the inside of the gas tank.... hmmm, I think I know what the next video might be.

[@frankmorgan8244]

Thanks for the tutorial on multi switch removal, now I know my switch is bad since the wipers are always on when I start the car...a 1997 Saturn Sl1. What is the red switch on the right side of drivers kick panel?

[@StanDrumz]

That used to happen to my 1997 SW2. Turned out to be an issue with the control board on the wiper motor itself; replacing the motor solved the problem. Not trying to steal his thunder, but richpin has an excellent video on diagnosing the windshield washer system (which of course activates the wiper system), that maybe might also prove useful. It certainly helped me out. kzbin.info/www/bejne/nYPWgJich6mUp9U&list=LLzUCI-TYmXbMW3xuuC63izQ&index=12

[@macheadg5er]

what is the best way to determine if problem is wiper motor or multi switch? First, my washer pump stopped working so i thought it was the pump but before i could make sure i started to get ghost wipers. i.e. the wiper would come on and off a few times on their own. Then today the pump started working and the wipers went CRAZY on their own. i couldn't get the wipers or pump to stop. I had to pull the 25amp wiper fuse. Now because the pump is running full bore no matter what position the multi switch is in im thinking it has to be the multi switch? The wipers work but only on the fastest speed. massive multi switch fail???? Note its a 2000 Saturn SL2

[@bigbubbabuford]

My dash lights dont work would this be the problem?

[@RichpinTv]

You should remove the negative battery cable and the air bag fuse and wait at least 30 minutes before starting your work.

[@Win5ston]

I had to do this same procedure now the airbag light stays on. Any suggestions?

[@RichpinTv]

If the wipers are working good otherwise then it could be a park function problem of the motor.

[@RoadDemon9]

Thank you! Just replaced mine today

[@marykinz8381]

Thanks. It's a 5.5 m&m right?

[@SuperDragonWagon]

hi Rich , any points on changing out a windshield wiper stalk? or work with this video ?thanks Steve 2003 Saturn L200

[@stuntz0rZ]

a new wiper motor.. great! i'll just add that to the list of repairs waiting to be done

[@dennisray9385]

Why did u go from a 5speed to a auto one

[@LSJUAN]

Why did u film in two different cars?

[@Ragewolf2008]

You really need to include a diagnosis process in this video so people can tell if it IS the switches are bad or if it's REALLY something else causing the lights to not work right, I thought it was the switch so I bought a new one at $103 and spent the next 2 hours taking stuff apart to find out that it WASN"T the switch AFTER ALL, but a part located under the center column connected to my shifter that had gone bad. Not sure what the part is or what it does but I replaced it and ALL my lights WORKS LIKE NEW, W/ the old switches still in it. The part looks like a shock or strut with a wired connected to it, just under the shifter on the right hand side. I hope this help the next person. Thanks.

[@RichpinTv]

Most vehicles of the same period are very similar.

[@johndodge1943]

Rich, great video! One of the better sets of walk through videos I've seen online. I don't have a puller - how tough is it to remove without one? Would be it a terrible idea to just manhandle it off if it seems stuck? Thanks

[@RichpinTv]

They can be on there pretty good so if your working on your own car i might suggest using a puller.

[@sharonKid69]

What about my coil? Could that be a issue

[@RichpinTv]

You have a keen eye.

[@scrapmetal100]

Try a 5.5mm nut driver instead of a socket. Also realize that the connector on the clock spring does not remove and that is why you are disconnecting further upstream.

[@jaynealgofast]

I replaced the multifunction switch on my 98 saturn sc2 now a buzzer sounds constantly when key is on. It sounds like it's coming from behind the radio. It never shuts off if key is on. any help would be great.

[@diversity78]

Did yu figure it out

[@RichpinTv]

You need a "nut driver".Places to buy would be a Hobby Shop or Amazon.

[@TheHolyGhost777]

Your videos have been helping me since 2012. God bless you, friend... Thanks so much for your videos!

[@sharonKid69]

I replaced my switch and my air bag light is on. How could I fix this?

[@RichpinTv]

It sounds like a wire is possible not were should be.

[@RichpinTv]

@dale3858 2-3 hrs i would think.

[@dat2601]

Hi Richpin, I love your videos. I have a 99 saturn sc. My wipers wont stop when I put them on. Would changing my multifunction switch solve my wiper problem. regards,

[@RichpinTv]

There is a better chance that the motor is faulty.Have you seen my video here:kzbin.info/www/bejne/ZnyrhqufjdNmZ9U

[@dat2601]

richpin06a Thank you for the reply. I have seen your video.

[@Laevatein9521]

richpin06a Hello, I have a 98 Saturn SC1 and the wipers randomly come on and stop in the middle of the windshield do you think that is the multifunction switch?

[@RichpinTv]

VanSaucy I would check the motor first.

[@popughomer64]

Hey rich, do I need to wait a half hour after removing the fuse and disconnecting the battery before I start to take it apart? thanks.

[@RichpinTv]

I could only find one repair manual that stated a time.It stated a minimal of 10 minutes after disconnecting the battery before working on system.

[@popughomer64]

Thanks rich i waited the half hour, your video was very helpful as always.

[@StanDrumz]

This is a guess, but if there is a capacitor anywhere in the system, or a risk of static electricity, the waiting period might be to allow any residual electricity to dissipate. Again, that is just a guess.

[@RichpinTv]

That is good news glad you go it done.

[@RichpinTv]

@capnfrog How the heck did that happen ....lol ...you are sharp

[@rfn944]

If you disconnect the battery, why do you need to pull the airbag fuse?

[@richpin3041]

Offend wondered why the manual would say that.

[@rfn944]

Not ever have explored how the activating circuit for a steering wheel airbag works, maybe there is a capacitor some place in the circuit that can hold a charge and set off the bag. Who knows?

[@whosahwutchin9497]

I noticed you began on a standard transmission. Next you were in an automatic transmission.

[@lunalink]

the car went from stickshit to automatic NICE =P nice camera!

[@RichpinTv]

I believe those are 5.5 mm

[@RichpinTv]

@lunalink You noticed that.

[@igal23yr]

as always rich great walkthrough video !!!

[@kayburkheaz3141]

I need to change. Turn signal arm 2006 Kia sportage

[@kayburkheaz3141]

Does any one know

[@eb121209]

Why did you use two different cars for this video? The first car didn't have a stereo installed, then when you were about to pull the steering wheel off, it went to another car that was identical that had a stereo installed.

[@richpin3041]

I did not have a puller with me on the first car then i came back with a puller later and used it on a another vehicle because ?

[@BicycleCrossroads]

@lunalink I just figured Rich got frustrated with that rusted or stripped steering wheel and switched to another car in the junkyard. ^_^

[@alifazal9863]

Thank for the Video. Could you please show me how to replace Headlight Switch on 2007 Hyundai Sonata or if any one know. Thanks

[@RichpinTv]

I just put it on my to do list,the bad news it is at the end of a long list.

[@1keykneedeep]

That job was soo tuff - u needed fresh socks.

[@RichpinTv]

Good eye....i forgot my puller on the first one.

[@RichpinTv]

MacHead G5r, Check out my troubleshooting video here: kzbin.info/www/bejne/ZnyrhqufjdNmZ9U

[@sslicker1]

great detailed vid,,,,,,,,,thumbs up

[@RichpinTv]

@hawke232 I do what you do plus people email me with requests for a video how to and i do it for them. rich

[@averydomingue4638]

its not a coil, its a clock spring

[@martinchris117]

thanks for the help

[@BigDowell95]

Lol I see you must have needed to swap cars cause the first was a five speed lol

[@crystalscan2002]

@richpin06a u should buy those cars :D take them turn into saturn rice rockets :D

[@imjus1guy]

LMAO i see u swapped cars for some reason.. one was crank window n other is electric

[@choppa91222]

1:33 LOL oops

[@marykinz8381]

MM*

[@bigbubbabuford]

My dash lights dont work would this be the problem?

[@RichpinTv]

It would probably not be a switch problem if all the lights are out.