Hey nice to see todays youth doing this stuff alone.its a oain but you saved yourself 700 dollars .cant beat that.
@Thatlowdsg3 жыл бұрын
Saved myself $700 and wanted to help others do the same by making this vid!
@ryanthurman92233 жыл бұрын
lol his go pro is picking up his heart beat. dope
@karenwilliams22324 жыл бұрын
I did notice that the nut that has the rubber in it, on your motor mount is installed backwards. Probably won't matter! I was thinking on doing this, but way to much work for me. Thanks Great video!!
@Thatlowdsg4 жыл бұрын
Thats a great catch, I did realize this later as I just had it sitting there to hold it in place! Thank you for the feedback!
@rebel98463 жыл бұрын
Always face the nylon out. If for no other reason, starting with the metal side will allow you to make sure the nut is threaded properly before the nylon bites.
@ThatblackEclipse11 күн бұрын
Comes in clutch years later fr seen both videos and man I already have the engine taken apart for an head gasket this is one of those things we’ll since I’m there might as well type of deal for me now cause I need the oil pan out and Yk how that goes 😭 also where did you get the engine mounts for the k member
@Thatlowdsg11 күн бұрын
At the time when I bought it on Aje's website it was included, but id double check if it still is. Glad the vids could be of use as well and with the k member dropped or removed you'll tackle the oil pan with ease.
@3xzsucof4 жыл бұрын
Subscribed for the great new edge content
@Thatlowdsg4 жыл бұрын
Thank you!! There’s much more to come for sure!
@LiftedWrangler3 жыл бұрын
Might look into this eventually. Just put a k frame in my honda prelude.
@Thatlowdsg3 жыл бұрын
Nice man those preludes getting more rare by the moment!
@geraldchapman22722 жыл бұрын
Bro I bought this K member in 2016 this was the first one they had built in a long time and they actually forgot that the motor was pushed to the passenger side to inches and it took me a year and three months to get everything situated on my car through the manufacturer that made the key member multiple motor mounts were made for me a lot of emails back-and-forth they did finally get me situated but not until they had a 2003 or four mustang cobra come into their shop in Illinois or Indiana that one of the identical set up that I was doing to my car so they got him situated and then sent me a whole new frame because they built the first K member frame center lined on the motor mounts which as I said before the passenger side is pushed over 2 inches. So all in all you are welcome because if it wasn’t for me and that other guy in 2016 you might not have correct parts in 2020
@Thatlowdsg2 жыл бұрын
Rounds on me then to you Gerald. You two set the foundation! I was concerned it may not sit right but I guess cause of you guys it does, so thanks!
@rush4s431Ай бұрын
Was there anything additional you had to order with the swap? And can you run any brand of coil over ?
@ThatlowdsgАй бұрын
I had BC coil over. I don't think it matters the brand you run but if you don't and use the factory front springs you'll have to order their spring perches. Other than that there's nothing additional
@NuisanceRacing3 жыл бұрын
Great video, thinking about ordering one soon for my Mustang.SUBBED!
@Thatlowdsg3 жыл бұрын
Thank you & welcome to the channel! Yeah the AJE one is great only custom thing I had to do was to smack the mounting spots where the control arms where a little forwards but I think its cause I’m running the stock control arms!
@NuisanceRacing3 жыл бұрын
@@Thatlowdsg are you running coilovers or still using stock springs in stock location? I know alot of the k members say you HAVE to use aftermarket control arms and coilovers.
@Thatlowdsg3 жыл бұрын
@@NuisanceRacing The K I bought you can reuse your control arms and all factory equipment, but they say with the coil over it'll be a better experience. Im running coil overs tho I have separate vids of me installing those and my aje tubular k member!
@shanepettit687211 ай бұрын
How’s the K member holding up? What kind was it? If you still got it. 3years ago probably in college by now or something😂 If you do I would like to know looks like maybe an Aje?
@Thatlowdsg11 ай бұрын
Its an AJE and Its the best thing I've done to the car. Feels quicker and it holds up well, AJE is a good brand Id recommend, and no college is where you go to get indoctrinated and owe 100k in debt lol.
@shanepettit687211 ай бұрын
@@Thatlowdsg Hell yeah! Aint that the truth. I just got an AJE as well and was wondering how well they held up. Thanks man!
@joshuahiggins5313Ай бұрын
Torque specs for tubular k-member to frame and motor mounts please?
@oga7850 Жыл бұрын
Is that k member only for the 4.6 or could it also work with the coyote 5.0
@Thatlowdsg Жыл бұрын
That one just works for the 4.6. I think AJE does make a 5.0 one as well
@Garrett897 ай бұрын
got a 97 cobra. with the AJE, can I use the OEM front control arms with this without any issues? Thanks
@Thatlowdsg7 ай бұрын
If you’re using springs you’ll need the spring perch add on by AJE for the front, if you have coil overs you’re good. I’ve had the stock control arms on my AJE tubular for years now and never had issues! Hope it helps
@Garrett897 ай бұрын
Thanks for the quick reply. Where did you order this K member from? Do you have the product # so I know I get the right one? Thanks in advance@@Thatlowdsg
@Thatlowdsg7 ай бұрын
@Garrett89 ajesuspension.com/product/79-04-mustang-universal-engine-mount-k-member/ > K member || spring perches ajesuspension.com/product/79-04-mustang-spring-perches/
@Garrett897 ай бұрын
Did you have any issue with the steering shaft going onto the steering rack with enough room? I heard these can lower the steering rack up to 3/4 of an inch. Thanks @@Thatlowdsg
@Thatlowdsg7 ай бұрын
@@Garrett89 My Stock one bolted up just fine, I also have a Maximum motor sports one I installed and it worked perfectly too.
@TheModAddict4 жыл бұрын
It looks like a lot..but im still looking forward to installing my k member. My support brace SHOULD be in tomorrow.
@Thatlowdsg4 жыл бұрын
It can be a lot but I believe you got this! A certified good luck to you! 👍🏼
@adamburgess216510 ай бұрын
How does the tubular k member feel on the car
@Thatlowdsg10 ай бұрын
Have had 0 issues past 3 years it’s on. Right away you feel the car being quicker in my opinion. Can’t say anything bad with it, AJE did a good job with their K member.
@jesusnunez65034 жыл бұрын
Quick dumb question man are the metal straps on the wiring harness grounds?
@Thatlowdsg4 жыл бұрын
No question is dumb! But if you’re referring to the ones that connect to the motor mounts yes those are grounds make sure those connections are tight!
@the__black__box3 жыл бұрын
What brand K-member do you recommend?
@Thatlowdsg2 жыл бұрын
Sorry on the late reply but I’d Recommend AJE, Maximum Motorsport. Haven’t really heard much about other brands honestly. Maybe UPR?
@lolz59563 жыл бұрын
Dope I'm about to do this soon!
@Thatlowdsg3 жыл бұрын
Hey welcome to the channel homie, hope you enjoy your stay and find the videos helpful! Goodluck!!
@TheOptionalKind Жыл бұрын
do you think this works on a v6 motor? specifically the 3.9l NewEdge?
@Thatlowdsg Жыл бұрын
The process is very similar. They have different oil pans & headers but as for the K member, rack n pinion, bolts should go it should be smooth sailing
@TheOptionalKind Жыл бұрын
@@Thatlowdsgidgf about the headers! IM GETTING S TUBE K MEMBER BOYS!
@pmd7771969Ай бұрын
Does the k member work with the stock struts
@ThatlowdsgАй бұрын
Yes. Although since you'd be running springs too then you would need their "Spring Perch Kit" it has the same model number as the K member.
@Mach1eric4 жыл бұрын
So I’m looking into a K member from team z & I’m doing it to drop some weight because I have 03 mach 1 with a teskid motor and going to run and the track just need a little input on your thoughts what my numbers would be 4.10’s FBO Slicks in the rear 26x10 Gutted trunk and rear seats E85 What do you think I’d run ?
@Thatlowdsg3 жыл бұрын
Sorry didnt see your comment, I think it would run atleast 10 or less seconds in the 1/4? Or atleast close to that. if thats what you were talking about.
@Mach1eric3 жыл бұрын
@@Thatlowdsg hopefully close to that but as I was cutting I decided to just gut the entire car
@ricklodestein11013 жыл бұрын
15.5's. Lol
@bernainmolina7481 Жыл бұрын
I'm curious, would this tubular crossmember help for clearance to put a steering angle kit for drifting?
@Thatlowdsg Жыл бұрын
Possibly, I mean the answer is yes because with the tubular K member you have a lot of access and if the angle kits control arms are chopped / tubular you’d have good clearance to work up front. But the answer is also no because you wouldn’t need this for a angle kit, if the angle kit is just a control arm, ball joint, chopped/‘modded knuckles, (sway bars optional) you can get all that out without taking the k member out.
@mosesandres33852 жыл бұрын
Where did you buy the engine support brace from?
@Thatlowdsg2 жыл бұрын
I bought it directly off AJE’s website. Select your year of mustang and match it up, can call / email for custom work I believe.
@mosesandres33852 жыл бұрын
@@Thatlowdsg thank you
@satoshinakamoto8638 Жыл бұрын
Paul McCartney's son
@ericking5712 жыл бұрын
Good Job Guys
@austinthompson71922 жыл бұрын
Hey! I am about to buy this QA1 Kmember for an '00 mustang I just bought. Do I need Coilovers to do this install?
@austinthompson71922 жыл бұрын
nevermind. I see that its an AJE and you answered this below. looks like I'll get the AJE. Great video.
@Thatlowdsg2 жыл бұрын
Sorry I didn’t see this! But either way no you can keep the stock arms and shocks!
@andrewcoleman62142 жыл бұрын
Would you have to square up stock k member if you took it of or would everything just bolt back up straight
@Thatlowdsg2 жыл бұрын
Stock one should bolt in as is. Wouldn't hurt to make measurements tho to make sure. I have a separate vid over Squaring the K member here -> kzbin.info/www/bejne/aaWQaXeKqK16jK8&ab_channel=Thatlowdsg
@سليمانالمجيني-و1ش8 ай бұрын
Good
@jr66023 жыл бұрын
What you do with your OEM K member? I need it! 😓🤑lmao
@Thatlowdsg3 жыл бұрын
Lol I still have it.. cleaned it up and just storing it. Pickup only 😂
@CoyoteDAworld3 жыл бұрын
Yo does this fit the v6 model ? The 2000
@CoyoteDAworld3 жыл бұрын
I'm taking my engine out and thought why not upgrade that
@Thatlowdsg3 жыл бұрын
It does not fit the v6 cause the motor mounts are different from the v8 but I’m pretty sure Aje carries k members for the v6 options tho!
@pmd7771969Ай бұрын
Lots of unanswered questions
@ThatlowdsgАй бұрын
Oops
@saiddanielalcaraz97774 жыл бұрын
Y la barra estabilizadora queda igual?
@Thatlowdsg4 жыл бұрын
Sí, Disculpa mi español no soy fluida.
@Thatlowdsg4 жыл бұрын
la barra estabilizadora permanecerá igual
@saiddanielalcaraz97774 жыл бұрын
U have a picture?
@saiddanielalcaraz97774 жыл бұрын
I looking k member. But, i dont know. Onli k member whit oem controls arms, and Springs oem.
@Thatlowdsg4 жыл бұрын
I have the factory control arms on right now. Didnt put the stabilizer bar back on cause I put coilovers on. But the factory or main aftermarket ones will fit! I have the video of me putting the control arms on in my coil over video
@MrSmiteTV4 жыл бұрын
When is the lightsaber duel dropping?
@Thatlowdsg4 жыл бұрын
NacityGaming pull up and we dueling
@__Michal3 жыл бұрын
Instead of WD40 use Petroleum jelly. Vaseline..
@skeezybreezy4freezy9724 жыл бұрын
should add year ranges to your titles to get more views also recomend adding newedge to your tags
@Thatlowdsg4 жыл бұрын
I’ll make sure to do this on my next video!! Thank you!
@dennispowell44244 жыл бұрын
Lock nut on backwards 🤣🤣🤣
@2vgod4603 жыл бұрын
Anyone one else notice he put the bolt in the wrong way?
@Thatlowdsg3 жыл бұрын
Yeah. Someone else commented this. I had later noticed and flipped it to the right way.
@Gear1993Head3 жыл бұрын
When are people gonna learn WD40 isnt a LUBEEEEEE lol
@Rubenac3 жыл бұрын
Kroil is king
@Ryan-yj6nb Жыл бұрын
Dude, I have a 04 gt in dark shadow Grey as well🤌
@Thatlowdsg Жыл бұрын
One of my favorite paint codes for this car.. Good luck with yours as well.