Nice build and nice flying. It looks like it tracks really well and handles very smoothly. Thanks for the video
@muteFPV5 жыл бұрын
You're welcome! The frame may be smooth, the pilot wasn't :P :P :P
@MCsCreations5 жыл бұрын
Awesome build, dude!!! Really well done!!! 😃 Great flying!!!
@muteFPV5 жыл бұрын
Thanks mate :)
@nikotttin5 жыл бұрын
Great vid! I have practically the same setup but on a 90mm frame. It’s so small... I’m that close to transplant it to this GP110 frame. Thanks for the review!
@muteFPV5 жыл бұрын
Damn, 90mm sounds very cramped for a top-mount layout! Does it fit a micro camera or are you using an AiO? Which frame is it?
I found a seat on thingiverse... and use a foxeer predator micro. No AIO. I also had to buy taller standoffs... The 2040 come really close though. Battery is indeed top mounted.
@muteFPV5 жыл бұрын
Nice, thanks! Frame looks great for the size
@FPVMgunit135 жыл бұрын
That's awesome... nice ...I like that, but I dont have leader 120... but it's a nice setup...I like it better for sure
@muteFPV5 жыл бұрын
You don't need a Leader 120, you can transplant any 2" micro to this frame (or build from scratch) :D I used the Leader parts for convenience, to do a quick swap.
@hawkeye11315 жыл бұрын
Do you intend to make more diy quad builds?
@muteFPV5 жыл бұрын
Definitely, I am already preparing for many new builds and detailed build logs ;)
@hawkeye11315 жыл бұрын
Awsome your builds are the best
@muteFPV5 жыл бұрын
I have been meaning to do new ones for a long time and I finally have the time required to do so :D I can't wait!
@hawkeye11315 жыл бұрын
Nor can i
@muteFPV5 жыл бұрын
:) :) :)
@gavachkin5 жыл бұрын
The frame is good, but it does not accommodate a three-level flytower. Plus, you will not install propellers larger than 2.4inch, although the frame size allows, it was necessary to slightly change the angle of the rays for 2.5 propellers. By this, I drew attention to the ZH-125, here it is exactly enough space for all the electronics.
@muteFPV5 жыл бұрын
There is also a 120mm version of this frame, which will fit 2.5" props better. It can fit a 3-level stack but it depends on the height of the nylon standoffs and what the top board is (if it is a VTx with a screen, it adds a lot more height and will not fit). I wish the ZH-125 frame had shorter standoffs (but still fit micro cameras). The double 20x20 mounting positions is great but it leaves a ton of empty space inside, I would prefer having the battery mounted lower. Or maybe think of a way to mount the battery under the top plate?..... hm.... food for thought ;)
@VincentFischer5 жыл бұрын
This happens when you wash your ZMR250 at a too high temperature. You're a real fan of that VeeRace now I see. Got one on order too for my trashcan (No I'm not throwing it away).
@muteFPV5 жыл бұрын
hahahaha yeah I should have read the label with the washing instructions :D The VeeRace antennas crash very well ;) I had them for a while but didn't have the chance to use them until recently. Their lengths fit the Tinyhawk and the GP110 perfectly.
@VincentFischer5 жыл бұрын
@@muteFPV Hope my trashcan looks as unholy as your hawk. Btw did you convert the Leader120 out in the field or did you just changed your craftname midflight? ;)
@muteFPV5 жыл бұрын
I forgot to change the craft name the first time I flew it with the new frame:)
@VincentFischer5 жыл бұрын
@@muteFPV No full throttle test rippage against the living room ceiling then? Probably a smart choice
@muteFPV5 жыл бұрын
Sorry, didn't get that one :) What do you mean?
@ayubhananyanottama54244 жыл бұрын
Can u share the pid, rates, and filter tuning?
@muteFPV4 жыл бұрын
Stock betaflight tune. Rates are a personal thing you will need to find what suits you.
@rawpicsfpv35165 жыл бұрын
Is there a 2.5" Version as Well? Currently i have the HGLRC Hornet frame. How much of a diffrence is the top mounting in terms of flight characteristics? Thx!
@muteFPV5 жыл бұрын
The 120mm version should fit 2.5" props, I added it in the description. I think that for this small size, ideally, I would prefer the standoffs to be shorter, to bring the battery weight closer to the center. This probably means losing the carbon side plates, which I am sure add to the rigidity of the frame. Compared to how it flew stock, in the bottom battery mounted Leader120 frame, I think I like it more now. I added more weight when I replaced the AiO with a separate camera and VTx so I cannot compare the two directly.
@rawpicsfpv35165 жыл бұрын
@@muteFPV super, thanks! I think i'll give it a try;)
@muteFPV5 жыл бұрын
The 110mm version I bought has been great so far, I hope the 120mm is the same. Let me know your feedback if you get one!
@allentituspaz32414 жыл бұрын
Do you have gp120mm frame? And are you using 2s 450mah?
@muteFPV4 жыл бұрын
Hey! I haven't tried the 120 version. I prefer 550mAh for this setup on 2S and 450mAh for 3S.
@hawkeye11315 жыл бұрын
Nice quad!
@muteFPV5 жыл бұрын
Thanks!
@rolandburrows48595 жыл бұрын
Pids?
@muteFPV5 жыл бұрын
I think it is the stock Leader 120 tune, I don't remember changing anything (and I suck at tuning :P)
@kokoblokoFPV5 жыл бұрын
first? best ending ever! stay away from my table
@muteFPV5 жыл бұрын
nnnnnnno! I will land on it, on your Tx or on your backpack.
@DODG-Hudsan5 жыл бұрын
Здравствуйте :) У вас очень классные видео 👍 И очень супер работы . Вы можете прокачать , затюнинговать , поставить FPV на этот дрон helifar H803 www.gearbest.com/r-c-helicopters/pp_009569349205.html
@muteFPV5 жыл бұрын
I hope google translate did its job right :) Thank you very much! You can add FPV using a small AiO camera with built-in video transmitter. Search for LST-S2 or CM275T, they are good options.
@DODG-Hudsan5 жыл бұрын
muteFPV Thanks a lot for the advice :) I will try to do as you said.