ENDURO SUSPENSION SETUP | Testing K-tech ORVS & Bladder Kits

[@dannyphillips8280]

Just come across this video and it’s the best suspension video iv watched. Finally understand what it does going each way! Thanks

[@Black_swan_incoming]

Just bought a second hand KTM with this suspension on. I’ll be ringing your shop on Monday for some advice👌🏼 Great vid

[@ktm300tpiontour8]

Spoke to your dad this morning about this set up and can’t wait to get it fitted 👌🏻 if your at cowm this Sunday I wouldn’t mind a feel of your bike 👍

[@52yamahar1]

Very well explained, I now have an idea how to adjust the clickers for different conditions, I’ll be seein yous soon for those K-tech upgrades 👍🏻

[@ogasi1798]

THANKS SO MUCH, JUST ABOUT TO GET THIS KIT AND THIS VIDEO IS VERY VERY HELPFUL

[@DarekNiemczyk]

Great video man well explained I just install the same setup, can’t wait to test this suspension.

[@markfreeman6873]

Great information cheers, gave a priceless insight into some base settings, saved hours of pissing about. Many thanks.. Top job...

[@NorthWestEnduro]

Great video. You guys have my suspension at the minute looking forward to giving it a go 👌

[@analog4css]

Thanks for sharing. Well done mate

[@jboive]

This is awesome! Just what I was looking for! Clear and understandable with what does what for when - just great info! 👍 Keep it coming!

[@mickey333100]

Great Vid. Will follow these settings for my standard Xplore then possibly think about the KTech kit. Nice 1

[@Sn0w1981]

Thanks! Great explanation to start properly experimenting with those settings! Maybe you could do a similar video experimenting with tyre pressure adjustments? Or maybe vs. different compounds mousse. Love the channel!

[@averageenduro2340]

Great video, I had an ORVS kit fitted and cant wait to try them out when we are allowed back out, will be trying some of your settings to see if I'm good enough to notice the differences!

[@nikswed]

Average Enduro Hi, what do you think?

[@averageenduro2340]

@@nikswed briliant kit, really happy with it!

[@jaymesdw]

I have the 2021 300 xcw with xplor forgot to mention:) Stock has been rideable but pinging around is a great description:)

[@billybob1773]

Excellent video!

[@vanontherun2843]

Great informative video, cheers!

[@andywilma2094]

My pal had his suspension done off ye dad. Loves it. Says it's great

[@tommyfourthreesix6264]

A really helpful and useful vid...... thank you!

[@justinawingo]

Great review! The best I’ve seen so far. Very interested in this kit. Did you revalve the shock, too?

[@ACEsuspension]

Yes and fit a bladder kit 👍

[@Hypertrick]

Recently found your channel. Normally its either top riders stuff or beginners, with your comments it makes for us intermediate to gain stuff. Love your old vids on the mx track when I need a buzz, the new enduro ones are equally good and directly useful as thats what Im riding. Keep it up!

[@elpot9381]

Cool video again interesting to see comparisons. You should deffo do a detailed how to set up suspension video! Good luck for the beach race 👍🏻

[@nickpal76]

Very good informative video. Just installed ohlins front and rear on a te250 any advice on some clicker settings as a baseline

[@ACEsuspension]

Nick Palmer start of around the middle of clickers and then have a play around with them.. for extreme enduro go softer and faster rebound, for mx style enduro go harder and slower with rebound 👍

[@terryberner]

Do you remember what front Tyres you were using Cheers top info

[@miro_s]

Very good. Am debating k-tech orvs against wp 6500 for by-no-means-fast trail riding. You sounded very convincing that 6500 would be too stiff and that k-tech is the way to go. Have you changed your mind since? Cheers.

[@derek3107]

To get something as close as possible to what your testing, which kit would you recommend for '22 WP AER forks? I was thinking The K-Tech ORVS Fork Piston Kit XCountry/Enduro Specs and the ORSS2 Air2Spring system.

[@SoilworkZA01]

What air gap do you spec for the forks? The K-Tech manual is a bit hazy in that regard

[@cyclefactoryuk]

Well played 👍

[@stevematuro8384]

I have the same suspension just wondering the amount of sag your usually running?

[@adamdoyley7017]

Hi pal I’ve got a gas gas 350ef it’s had same ktech revalve kit same as you have will I be able use same setting?

[@lisimahus]

hi Ryan, great review, this is exactly what I was looking for concerning enduro suspension setup for quite awhile. Too many reviews out there from other guys who don't have the knowledge or the skills to put the suspension to proper pace. Until now I've run the stock Xplor suspension on my 2017 300 EXC bike, and was pretty happy with it for technical riding. But for faster tracks and for fast rocky riverbeds Xplor is not helping too much. My buddies run Ohlins cartridges or the ultra expensive WP Cone Valves and sometimes I can barely keep up with them. From your feedback I reckon K-Tech ORVS is the way to go to give them a good run for their money :)

[@ACEsuspension]

lisimahus thanks mate.. would definitely recommend the k-techs internals you can always take out and put onto a new bike if you wish to upgrade in the future 👍 Give is a ring or message us at ACE Suspension if you want more advise, thanks

[@lisimahus]

@@ACEsuspension I will definitely message you guys in the coming days. I need the upgrade for competitive riding in expert class or even, if stars align lol, switching next year to pro in our hard enduro championship.

[@ACEsuspension]

lisimahus no worries.. good luck!

[@jaymesdw]

Thank you for the amazing video great job. There is a company near me in Colorado called Endurospec And they seem to like the K tech like you guys do. They also offer the mx tech lucky as an option for the fork and I am torn. Out back for the shock they recommend the mx tech TANK system. Wondering if you have tried the lucky cartridges and if they are worth the $500 more. What you rode in the video is my preferred terrain but we also get quite a bit of whooped out rocky sandy desert in between. So far thinking k tech front and mx texh rear (save the remaining money for an rk tek head). Great explanation on the compromise needed for varied terrain (not usually one setting thqt can do it all, so finding the beat overall compromise). Thanksgiving again for the very informative video and if I eas in yiur country I would definitely bring the bike to you guys!

[@samholmes2098]

Hi mate not suspension related but what bars do you run?

[@ACEsuspension]

@@samholmes2098 standard KTM MX bend. We run the racefx bars but if you like Renthal fatbars it’s the 821 bend. But it all depends on rider’s preference as we are short we like lower bars 👍 Cheers

[@jcdavie8725]

Very helpful-

[@medicatedflowers821]

You done much on the bike after lock down mate

[@Isaac.232]

How much are we looking for the suspension setup your running in this video with labour costs?

[@ACEsuspension]

Isaac 232 depends what Bike you have and how much you weigh ect.. give us a message on our Facebook page if you can 👍

[@Koi.Heaven]

Hi Ryan, who is the local supplier for k tech to supply and fit. I have a Ktm 150sx 2019 and would like to change both the internals on the front also upgrade the rear shock. Who could do this thanks 👍

[@ACEsuspension]

darrylcwilliams where abouts are you from? We can sort for you no problem.. a lot of people post to us as well 👍

[@Koi.Heaven]

Ryan Crowder will post you on Facebook 👍

[@ollie6512]

Where is your dad's business based?

[@adriantompson]

nice to see you crash, i crash a lot can i blame my suspension.

[@ACEsuspension]

adrian tompson even the best Suspension in the world can’t stop crashing.. but it can help you feel more confident and crash less ✊️🏆