My 2ND GEN DODGE RAM Monster Truck EXPLODED On Day 2... *Then COPS Showed Up*

[@Truckinlife]

I think it needs a cheap front driveshaft and a trip to the off-road park! 🤣

[@cr500mike]

Bring plenty of tools and parts, and some beer

[@fogetit1204]

@@cr500mike and some nutballs

[@13christbane]

it needs to go to the junk yard

[@dontcallmecray7952]

Absolutely

[@beast-je6wr]

The 54s are a little overkill 44s would look better on it.

[@AutoVlogOfficial]

hahah, Bobby's face during the jump 😂😂 He's truly terrified 😂

[@RFRacing717]

Should be use to this shit by now 😑

[@mitchellgreenwalt695]

Let’s see the monster dodge crush the danger ranger lol

[@garett9510]

Almost as bad as the look on Mikes face when he shifted into reverse

[@stanggang754]

Bro come on jump the F150 before u sell it dude

[@Plantation1984]

More Buck content!!! Build this thing up, please! Absolutely love it.

[@quicklt1]

Mike, “aww it’s filled with dirt though!” Ladesh ,”get your tongue ready..” 🤣

[@sputnikalgrim]

I love that the officer was like just basically don’t be unsafe. Ballsack!

[@fastmaros]

You should put a roll cage in it and a driveshaft loop for safety Mike.

[@RFRacing717]

You promised you wouldn’t show my jump face 🤬

[@striiker4950]

🤣

[@donovan6982]

Rip

[@slapdoctor707]

Brace for impact

[@yirrrboii5318]

I mean.. an appropriate face though.😳

[@samuelmyers9146]

Worst trade deal

[@marcohuertas692]

Should make the trx that big!! Would be epic! Put some limiting straps or a chain for the rear end.

[@chrismueller1734]

get yourself a limiting strap s for the back end Def and put them on where the shocks are and put them on so they don't let the shock come all the way down and that will stop the drive shaft from coming out of the transmission it's pretty simple you can use anything you can use chain you can just go store and buy limiting straps you'll tell you how to put them on or you can use anything you want to you can use rope you can use whatever you want to just as long as it limits it from coming down too far to pull the drive shaft out of the transmission

[@harryschneider1760]

Is that why some trucks have chains welded on the axel...was wondering if it was for show...but makes sense know...ty

[@shadow105720]

Or get a slip yoke eliminator and a 2 piece driveshaft with plenty of expansion. Especially if he already has to order a front shaft anyway.

[@danielblazier2630]

Or do it right and get a slip yoke eliminator and a longer driveshaft

[@arz42]

BALLSACK!!!LOL Awesome vid hopefully Buck stays around for awhile.

[@lilredexptsc]

Sometimes the dumb stuff like this is what I enjoy the most. Please build this truck up a bit. I know a lot of people are wanting a Cummins swap but I’d like to see you build up the 360 or 318 that’s in it. I couldn’t remember which one it is. Either way, it’s a fun project!

[@moparjr89]

2nd gen 2500s never had a 318

[@lilredexptsc]

@@moparjr89 Oh ok I guess I didn’t pay that much attention on it being a 2500. My bad.

[@scottwexlin6456]

@@lilredexptsc actually, there were some “light duty“ 2500s early on that were available with the 318… 7700 pound GVW. But they went away after 97 I think. Other than that correct, 2500s were available with the cummins, or the V 10 or the 360. I had a 97 V10.

[@joshuarich1990]

Instead of building a 360 up I'd say he gets a 440 from an older Dodge and fully builds it so he gets more torque and more horsepower.

[@turbodiesel4709]

@@scottwexlin6456 : Hmmm... I'm not so sure on your 318 comment. I do agree with the rest. Wish someone had some actual documented proof. To my knowledge, the smaller displacement engines, the 4.2L (256cid) V6 gas and 5.2L (318cid) V8 gas, were only available in the 1500 series trucks. They were never available in any of the 2500's, light nor heavy duty. (Side note: Yes, I know the bigger 5.9L (360) V8 gas engine was an available option in the 1500 as well.) Anyhow, amongst several others, I own an unmolested 1995 Dodge Ram 2500LD. From the factory, my 2500LD has the larger (360cid) 5.9L Magnum V8 gas engine. It's backed by a 5-spd manual trans, and it's a 4x4. It also has a Dana 44 hybrid (8-lug) Front axle & Dana 60 full-floater Rear axle. They are NOT corporate axles. There are a ton of "hidden" differences between it (the 2500LD), and 1500 or 2500HD series trucks. She's a true factory "bastard" truck, IMO. Other than an added aftermarket lift kit, she's original & mechanically unmolested. In regards to the HD's... I know for an absolute fact that the 2500HD was only available with a 5.9L V8 gas, a 8.0L V10 gas, or a 5.9L I6 diesel. I've personally owned all 3 of those variants, and still currently own a few of them.

[@T-Tronic]

Not many folks have the balls to jump a vehicle, much less a monster like that! That would definitely be an ass puckering moment. Very entertaining as usual!

[@problytrippin8153]

Drop the truck off to get the 4x4 fixed and get the truck straight piped from headers back lol. Make that thing super loud mike! Tune it up a little bit. Cold air intake. Tuner. And let her eat in the fields lol

[@mograin_]

Woman here who proudly watches this channel! I’m from the cornfields of Indiana so I would not be shocked to see that truck 😂

[@TreModz]

Love the content can't wait to see the ZR1 back again *insert the chomp of a heads and cam package*🔥

[@natemayhew99]

Glad to see you getting back to the crazy content again!

[@the_dyna_don3860]

Got to love the safelite commercial that popped up .03 seconds before you and Bobby jumped the truck 😂

[@larrynettles5594]

The one and a half ladies comment was hilarious. With the stuff that happens today, that's probably more true than you think. 🤣🤣

[@bbbbbbbbb9401]

Thanks for the comment,do you love cars ? What kind and type,let me know on my tele above 🎁 username name🔝!!!!

[@slapdoctor707]

12v Cummins swap please. The duramax is almost back need another diesel project

[@jakeschannel207]

Yes Cummins swap it

[@jburford89]

I’ve been commenting off and on for years saying he needs to do a Cummins build. And go wild with it. Even a Cummins street race truck and I know he would fall in love. Then give it away, I would buy so much merch

[@slapdoctor707]

@@jburford89 I thought he would have build one too by now. Yah he had the mega cab but that's a 5th Gen never got a delete or anything performance wise

[@bobbystout4123]

A hellcat or Cummins swap would be sick in a big truck that was built for off-roading

[@spencerhutchens]

You and Bobby jumping and me laughing so hard because of that face. Love the big truck.

[@eichler721]

That bounce after the jump wad crazy. Loved it

[@briansside9668]

I’ve been waiting for a big 2g like this to be on KZbin, thank you so much please keep these videos coming

[@GRIMRPR6942]

I really like seeing this truck from outside the vehicle while somebody else is driving it down the road. Now i know what it looks like when people see me driving my 2nd gen down the road (on 42" tires). Theres just something about the 2nd gen Dodge trucks that gets me excited, i cant explain it but i feel like a kid at xmas.

[@philvictor5537]

Buck needs a good drop box for both drive shafts.

[@alanblasczyk1779]

The Grandpa Ram is a legend. Rock on Mike !

[@BadInfluence_JKU]

Would definitely love to see more 2nd gen content and maybe a good build on it.

[@robmatthews4259]

Sounds like a 5.9l 360 Magnum, sweet second gen minus the bluetooth driveshafts lol

[@jacobmullinsjm]

I've got that in my Dakota rt. Turns gas into sweet noises

[@robmatthews4259]

Nice, I had an 03 ram 1500 with the last of the 360s had the ol girl for about 10 years. Sure miss the ol beast 👌

[@eternalbeing3339]

Get like 8 mpg with that motor.

[@robmatthews4259]

Got about 7 on mine lol

[@jiggaman_81]

Let’s Go Brandon!

[@eternalbeing3339]

Joe Brandon has nothing to do with this.

[@alanbrooks80]

6:54 Ladesh Quote of the year.. "GET YOUR TONGUE READY" HAHAHAHA

[@lsucody3687]

Turbo Diesel Swap with real coil overs!

[@jonhand3373]

Awesome jump! Bobby's face was priceless! *Ballsack*

[@donaldpatterson9151]

You should get some new drive shifts and take it 4 wheeling with send it steve.

[@ChaoticDave69]

No

[@DarkDecimus]

2:55....with the camera being way up high, looking down on that truck, makes it look like one of those 12v kids cars or a R/C truck and Mike is a lil guy about 1ft tall. LMAO!!! Funniest perspective I've seen in forever. I'm dead hahaha.

[@johnharasymko9170]

For the price of a front drive shaft, get one... it'll be worth it

[@TS-qn6tj]

Are you taking it to Blooms burg truck show July 9 weekend hope to see you and Steve there this year

[@Colin__flanery]

I used to be a fan of this channel but now I’m a whole air conditioner

[@Husky_429]

God dammit 😂

[@jasonharris3873]

Can’t believe it is still running. Vette looks great with the field backdrop.

[@JJthejetplane-in7ii]

Would be legendary if it had a 12 valve in er

[@edwinschmidt4023]

Your channel was one of the first channels I started to watch just getting better with time keep it up

[@treymiller1661]

I absolutely hate HOA. They tell you what you can and cannot do to a property that you spent your hard working money on.

[@Husky_429]

Local Karen’s Association

[@cassiespencer6134]

That's why I suggest one never buy a home that's subject to an HOA. And to those that do and subsequently complain I suggest they look in a mirror and yell profanities at themselves. One can't blame others for a choice they themselves made

[@blang38]

That is until a neighbor does something that absolutely trashes your home value and/or ability to even sell the home you spent your hard working money on. As with many things in life...there are pros and cons to anything.

[@treymiller1661]

@@cassiespencer6134 absolutely agree. That’s why I live a few miles out of town where there is just open land. I am surrounded be farms and nothing but quiet

[@cassiespencer6134]

@@treymiller1661 I can relate to that since I live on a ranch. All I can see is sky and the horizon/mountains, although I know every square inch of it, or so it seems. Not a fan of big cities and although I'm not claustrophobic it feels like the walls are closing in. I was in downtown Manhattan in NYC once and couldn't wait to get out of there after being stuck in a traffic jam. Finally found a tunnel and boom I was in PA farm country. I wanted to get out and kiss the ground.

[@tjk3385]

Loving it! Forget electric vehicles when you have these gems

[@rahul_2321]

I think this needs a cheap front driveshaft and a trip to an off road trail

[@Duke_Nuke]

Are those wheels big enough where you can put them on the c4 and drive UPSIDEDOWN.

[@trelee9865]

I'm really interested in seeing a truck with welded diffs all the way around and idk if it would work, but maybe even a welded transfer case

[@rockdem0n]

There's no point in welding a t-case, it's already locks both driveshafts together. At least on the older ones any "part time" transfer case is almost always "locked", they did start doing some hybrid part time/full time things in the NEW newer trucks like the TRX but even those should be locked together in "part time" mode.

[@turbodiesel4709]

@Tre' Lee : You can't steer for shit, if you lock the front diff. Unless it's going to be strictly an off-road, straight-line, mud bogger, you don't ever wanna lock (or weld) the front differential. Furthermore, fully locked diffs will tear the vehicle apart in relatively short-order, from all the binding stresses & strains. The best answer for differential lockers are air lockers, with in-cab controls. They enable your truck to be good for both on & mild to wild off-road use.

[@niklase3666]

"Enter ballsack" ...Mike you are a f*cking legend! 😂😂👍

[@calitri-boost]

It’s amazing how concerned Karen neighbors are about a vehicle parked on your own grass. Is your life that pathetic that you have to worry about that…

[@devincasanova5058]

Mike this video had me laughing ur hilarious LOVE your videos!! 😂😂

[@eddias5641]

Can’t wait to see more Buck. That’s just crazy 😂.

[@jonathanvillaraus4310]

Bro you should spice this truck up. Also loved watching you work on it

[@vinniecorleone62]

I love your 2nd gen Ram! I'm on my 3rd new Ram now with my Limited Night Edition with Hemi E-Torque!

[@superhawk20002]

I wouldn't swap a Cummins. I did it years ago and built up a massive 2nd gen dodge and wheeled the hell out of it all over the US. The right axles and gearing with the 360 gas is a better combo (other than the cool factor of a cummins diesel in a massive truck, it really draws a crowd sometimes). At minimum, get a degree ring and rotate the transfer case a few degrees. I'd also look into an offset ujoint for the front driveshaft and you can prob pull off a stocker, but you'd need lockouts to run it if you lock the front... and its only for low speed stuff. Thats all if you don't want to run a drop for the transfer case and all the necessary support.

[@calebwilkerson5610]

Is that a 5.9 360 motor and what is the gear ratio for the diffs. Would really like to know I got a 5.9 1500 sport thinking about doing 12inch lift on 40s

[@jcstuntz3285]

literally next video after calling it, you have a cop interaction 😂 lmaooo im lovin this content, the jumps were nutssss

[@HellcatDreaminJosh]

Street Speed 717 Awesome Video I think it's awesome that you Drove Buck on the road and that you fixed her Drive Shaft and I can't wait to see more Buck content

[@bray7607]

Glad to see Bobby is safe and well. I would like to see more of what that truck can/could do, although I would put another drive shaft in and have it 4x4 again : )

[@Jammerwhy]

This is the quality content that we, the subscribers, are here to see!

[@timbrown9704]

Awesome truck bro .. Keep up all the good content mike.... Love the truck man

[@treybrown7815]

What lift kit ya got ..can i get one?

[@mitchellgreenwalt695]

BALL SACK !!!!!!!!!!!! Mike I love the channel keep killing it !!!!!!!!

[@molives7]

Mike!!!! Cut the cats off it will give the sound your looking for and you could flip the headers upside down they the hood 🤘🏻😎 love the videos

[@codaily]

Congrats on fixing it Mike !

[@damienprosser6327]

ive bought a bunch of stuff off the website, hands down the shirts are my favorite. they fit super well and really comfortable. well worth the buy.

[@AsmallTownTeam]

That truck was a beast in person!! Great video bro!

[@call_out_kingz]

Buck and the OG duramax content.

[@bbbbbbbbb9401]

Thanks for the comment,do you love cars ? What kind and type,let me know on my tele above 🎁 username name🔝!!!

[@DomIsSpooky]

Amazing Video man. Can’t wait to see more of Buck the truck

[@TattedTommysTv]

you get that truck out of Texas? think I've owned it before looks very familiar

[@dylanwyrick2587]

Ballsack😂😂😂😂💀 love the content man

[@bryanstuckenschmidt1099]

Fix buck up! Make him a show truck!!! Time for a lot of love!!

[@timzeez525]

Hey dude serious question though, would you ever build up a performance diesel truck??

[@dylanfromdao]

1:48 the engine noise from mikes mouth added in😂😂😂

[@kyleyoung6103]

Died laughing at “don’t ya hate when it slips out?” 😂

[@haulinzx6rr]

Let’s go Avalanche!

[@davekeyz8016]

All that truck is missing is Lambo doors!! 🤣🤣

[@bbbbbbbbb9401]

Thanks for the comment,do you love cars ? What kind and type,let me know on my tele above 🎁 username name🔝!!!!

[@marrag1]

That literally is the same color as my old 2nd gen with the maroon paint and black undercoating it literally brought back memories of when I first bought and brought it to my apartment and started putting a lift on it.

[@mikeandshelliesoverlanding]

Love the truck 😂 and loved seeing the face in the jump

[@Garciadude]

its just needs a hellcat swap and fix the 4wd 🙌🏼

[@ken-ul7kf]

How big of a lift you have on it and the tires

[@StreetSpeed717]

54” military tires🔥 Lift is custom so I’m not really sure we never measured

[@joshhodges5688]

Did you put gas in the diesel tank?

[@daveboling8411]

I'm thinking that the Driveshaft is factory length and with that much lift, it was destined to come out. Because of the extreme angle of the drivelines, you should at least have driveshaft safety loops, (on the rear at least), so you don't end up going end over end because the driveshaft came out and then dug into the asphalt. Also because of the angles caused by the lift, adding a Constant Velocity Joint, (at least on the rear driveshaft anyway), would stop vibrations caused by extreme and/or mismatched angles of your drivelines. My recommendation would be to add it just behind the transfer case, rather than at the rear axle. With any luck, it also might just add the exact extra length needs, (because of the lift), so that you do not have to go out and have a custom driveshaft built for it as well...!!! I own a lifted 84 Toyota SR5 4x4 pickup, running 10 inches of lift and 38 TSL's and I have had to deal with these same issues on my truck. Now it drives like a dream, even at 100 + MPH, and more importantly, I feel safe driving it at those speeds.

[@ganoungman7869]

This thing is nearly. Love it. Keep the good content up buddy.

[@Clay_kn4nil]

I peed a little when you said "You would think it would still drive"! 🤣🤣

[@larrytheableguy3441]

Hey ballsack, stop grabbing your T-shirts out of the children's bins. 😄 That truck was built for show not go. A good lawn ornament.

[@jerrylambo9467]

That HUGE pick-up need's some Texas longhorn horns on that front grill / Hood. 🐂

[@Truckin_life]

🤣🤣🤣 thats when you know you never work on your stuff "I fixed it! I fixed my truck!"

[@bbbbbbbbb9401]

Thanks for the comment,do you love cars ? What kind and type,let me know on my tele above 🎁 username name🔝!!!!!

[@daol4558]

Laughed so fkn hard at Bobby's face 🤣

[@todtalk3912]

Just be happy u can easily change out the drive shaft components. I own a subaru and the drive legit, needs to be replaced entirely if something happens to it, at least on the model and year I have so, it could be much worse.

[@Plate_Ho_73]

You gonna get the front drive shaft fixed?

[@ckrose4163]

Ballsack Peacock!!! I need to enter again, I Love the Vette, but I really Love the Camaro! I Like the sales ad always! Love seeing the new product!

[@bradrick2513]

Dude love that the cop says take back roads home lol

[@mikesmotorsportsgamingrevi4814]

Finally a local youtube channel

[@Chefchev21]

I love the switch up on the vids keep ‘em coming with the truck!

[@steven402]

Buck could turn into a sweet swamp truck🙌🏻😂

[@sergoffthegrid]

😂😂 “ballsack I don’t care what you do..” Lmao

[@MrHemikid426]

That truck is awesome. Probably go in the snow real good. Hopefully you have it for next winter.

[@bbbbbbbbb9401]

Thanks for the comment,do you love cars ? What kind and type,let me know on my tele above 🎁 username name🔝!!!!

[@mikescarhole]

Its nice to see ya hammer on that truck. And you did some work on it. Great video bro!

[@kayossmayhem]

Keep it up mike you bring the smiles. I am subd to WD, Strad, and many others but your have always been the vids I look forward to the most.

[@majinbluu_956]

Ballsack! Haha oh man that C7 GS is beautiful 🙌🏽

[@gttv406]

This upload had me smiling a lot

[@heartlessmedia]

Do i need to get more entries? I entered when the supra and the zl1 were in the give away will those count towards the zl1 still

[@bbbbbbbbb9401]

Thanks for the comment,do you love cars ? What kind and type,let me know on my tele above 🎁 username name🔝!!!