My 3D Printed BOOSTED BOARD KILLER

You can almost 3D Print anything, so I decided to print my electric skateboard. Or at least as much as possible of it.
This project took way longer than expected and was shot already in summer 18, so sry for the huge delay but I've been working on so many things and been studying for University so time is rare.
Project page: www.electric-skateboard.build...
(due to strong censorship now also here) forum.esk8.news/t/3d-printed-...
Music:
Hard Dope Trap Beat 2019 II "Lamborghini" II Prod. Octilary
• Video
Cassette - Smooth Boom Bap Beat
• Cassette - Smooth Boom...
Travis Scott "No Warnings"| Hard Trap Beat Instrumental | 2018|
• Video
Lakey Inspired
/ lakeyinspired

[@geovannicampos6158]

Man if you can make this board commercially. I would buy it! 🙏

[@xyperox]

me too... greetings from Serbia

[@cityslick7]

Dreaming is doing. We will be seeing this in 2020 😉

[@grantoldblueeagle]

And me that’s awesome

[@petervo9236]

Oof give me one.

[@tituslazare2064]

Just start your own company with this already

[@MarkusRene]

millionaire overnight

[@vuswa]

I have a name for it: "NOT A BOOSTED BOARD!" ...or... "B.B. (Better than Boosted!)"

[@p00pie]

@@vuswa thats really dumb

[@jamoin3829]

@@vuswa Good idea, and you can make a fast food chain called "Better than McDonalds" and hope you don't get sued.

[@parkerd2154]

Not many people are going to pay for a 3D printed board. Get ready to pay 50k for each injection mold. The market is flooded with competition and these electric longboards are fairly easy to make. There is not much to differentiate the product besides it's wattage and the 18650 batteries he's using are available everywhere. Then you need to look at profit margins after raw materials, shipping, and assembly to determine if there's actually a potential business there.

[@kensh7011]

Respekt wirklich !💪 Dass du so viel deiner Endergebnisse deines Lernprozess hier bereit stellst der Hammer Extrem hilfreich und zeitsparend für alle die solche projekte angehen

[@andriik6788]

You read technical specs like Eminem in rap-battle :)

[@Pryside]

If you carry this 9.5 Kilo board you knees will weaken and your arm get heavy, then there will be vomit on your sweater already, moms spagetti

[@Laxxtzor]

Thank you for designing this thing, i have an beaten Loaded board and been wondering for this for a while now. I've thought of installing hub motors because of all the dirt (live on the countryside). Keep on designing and posting these amazing projects, cheers! :)

[@seraphindechent7061]

einfach nur unglaublich, wie du es hinbekommst, dass deine Boards sich immer übertreffen, während ich noch an meinem Ersten am bauen bin und durch dauerhafte Komplikationen nach ca einem halben jahr erst 30 km gefahren bin Fazit: Hut ab ich bin begeistert. Mach weiter so

[@zachmoir]

Freaking awesome dude. Thank you so much for all the work and safety priorities in place on the build! I plan to start my first print today. My goal is to have this project completed by August. 😁 So stoked

[@xy.z]

Richtig geiles Projekt 👍👌 freue mich schon auf das nächste Video

[@esk8tapas22]

Hands down !! The best Pryside Video !! 🔥🔥 Watched it nearly 50 times !!

[@MrGuyCali]

LOADED VANGUARD! Been my favorite board for the past 6 years. Amazing board

[@Pryside]

Quite expensive but really worth it, so smooth to ride :)

[@johnny4498]

Very nice new Video! Man, I just love that stuff!

[@Porkobosso]

Great scott! This is just awesome!

[@stupididiot2199]

Such an awesome build!

[@laitchdasi]

I think this guy is a German.

[@Pryside]

Get to se chappa

[@laitchdasi]

@@Pryside xD are you trying to say (get tu da chappa ) ? Like Arnold did? Austrian accent haha .. Btw I really loved your skateboard .. and the technical details .. well done..

[@WhitedevilEE]

Yes, he is, he's from Tübingen,Baden-Württemberg You can see in his Video, where he showcases the driving, talking about the reliability, that he drives by cars and if you pause, you can see their Plates ;-)

[@laitchdasi]

@@WhitedevilEE if you watch the video and notice the engineering level.. you also reach the conclusion that he's German ;D He's Lucky to be live in Deutschland

[@WhitedevilEE]

@@laitchdasi He's not lucky, because these boards are not allowed to drive on public streets here. (I'm German too) So his board is highly illegal and could be taken by to police if they stop him. (Most cops however are cool about it, as long as you drive responsible and don't hurt/endager anyone)

[@Seljunk]

Beautifull design, Keep up the good work. Will def try out your build !! TY for sharing the build and info

[@LeeWright]

Great video of a great build dude! DIY forever ❤️

[@junuhunuproductions]

Learned a lot too. Adding that diode at the input of VESC for over voltage protection, using UART to control the VESC. And water proofing the electronics, cheap and better bearings, etc. Thanks a lot.

[@turbotrana]

Yes, more insane stuff like this.

[@blakey271able]

Very informative lots to think about some really good ideas by far the best video I have watched recently I hope you do well thanks for sharing

[@fpvclub7256]

Wow, amazing work!.

[@yonelaposwa4932]

Man, thank you so much for this video. I really don't understand why people are disliking it. I'll be building two boards for my university project this year and your video helped widen my scope on things I need to analyse. Thanks for the video. You got yourself a new subscriber

[@Pryside]

thanks really nice to hear. Yeah I made english videos since a year ago, some ppl are still pissed I switched to english... But its okay :D

[@nathanjmansfield9969]

your amazing and inspiring. your bb killer is fab. i've subbed. keep skating

[@xAirVsPaintx]

This was amazing

[@junuhunuproductions]

Enjoyed it a lot. Smart BMS and good choice on high power battery could be the next improvement for my esk8board. 🤗

[@Creepiify]

Big respect

[@CodingJedi]

Thank you for this video! Really helpful!

[@Directory1]

Your awesome man. Thank you.

[@JS-es8pk]

You are brilliant!

[@les9330]

Freue mich schon drauf 💥💥💥

[@kennyraceboy]

This is a great video, you’ve certainly earned my subscription! I’d love to see a video about your anti spark switch and how you made it. Keep up the great work!

[@Pryside]

Thanks, yeah that propably will be the next video when I find the time.

[@vuswa]

That is just awesome dude! Amazing stuff. I'd like to have a try making this as I have a 3D printer and old longboard gathering dust in my shed. Thanks in advance! :D

[@Zero-wt7xf]

This dude is a blood genius.

[@PracticalProjects]

Great video and build!

[@simonj9264]

awesome

[@cntrix2047]

nice mal wieder was von dir zu sehen.

[@jo.nathan2]

Endlich ein neues Video!!!

[@wavegreen]

You got my sub and like with one amazing high quality video, congratulations :)

[@Pryside]

glad you liked it :D

[@qasimasif1152]

Love you bro

[@buttersstotch9884]

Nice!

[@rayboard514]

Nice

[@__dummy__7523]

Zealous bearings with metal balls are relatively "cheap" and very smooth after a break-in period.

[@Electronic4081]

Nicely done! I’m a sophomore in high school right now but I’m probably going to be an electrical engineer when I grow up. It’s incredible that a relatively small device like that can pull 5kw!

[@Pryside]

Nice, very cool to hear. I'm currently studying as an EE, it's very useful because you have more options where you want to work at and it's easier to get into higher positions at big companies like Tesla or so. But for a person like you who experiments with flyback transformers in his freetime, this will probably be a huge boring ton of theory. My first sem was almost completely on how electric fields in a capacitor work and you have to calculate a ton of stuff that doesn't really get used unless you want to work at nichicon. I usually only enjoy like 10% of the stuff I learn there everything else is just nice to hear but not practical.

[@Electronic4081]

Oh okay, it sounds like pretty much what I do in my physics class just more In depth. I wish I could learn more practical things in class and not theories, but I guess that’s what brought me to this video! I learn pretty much everything I know from KZbin.

[@nitishgupta5959]

Alter, wie machst du das alles, der absolute Wahnsinn. Mann muss so intelligent sein um so etwas zu bauen

[@tim6656]

Endlich mal ein neues Video

[@christians6350]

Echt tolles Projekt und klasse Video! Ich glaube der Algorithmus würde sich freuen wenn mehr Videos, die dafür aber ein wenig kürzer sind, kommen würden. Ich hoffe das Video wird trotzdem weit verbreitet werden.

[@isaaclyonsf1]

For anyone looking to get an easy to use and cheap 3d printer, the ender 3 and ender 3 Pro by creality are good options.

[@amanuelamanuel]

LOVE the gritty details! You should start selling boards!

[@LuisLifestyle]

Endlich 👌🏻

[@LlamaDuck]

would have loved to see more details about how the electronics where put together since im a complete nub when it comes to that

[@WatchDutchMD]

Nice video !!

[@Wertibus]

dein macher und optimierer geist hat mich überzeugt, abo :D

[@__dummy__7523]

I use quality capacitor on my drones circuit board for noise filtering on the battery. Thx for the tip for esk8 electronic I did not know the TVS diode.

[@Pryside]

I also added a tvs to my drone, just keeps it safe and avoids broken escs

[@__dummy__7523]

@@Pryside I burnt a lot of esc... I will a TVs also. Super thank you.

[@jo.nathan2]

Omfg wie nice :D

[@christians6350]

Juhu endlich wieder ein neues Video!!

[@Pryside]

haha, ja hat einfach mega lang teils gebraucht

[@christians6350]

Die Arbeit hat sich aber wie man sieht total gelohnt!

[@alexvinnikov2967]

nice review, and like it much ! might also do some exploration after finish my first build of el-board 1x beld drive based on VESK 4.2 with 5045 motor and 7s2P battery 6A. then may go with this even deeper :) anyway cool guide Leo !

[@notpewdiepie6458]

i dont even ride but would buy simply cause of all the ingenuity and build quality...sub'd

[@ShiiWaddyWaddy]

Another useful and super cheap addition is a small pack of silica gel inside the casing. It will keep out condensation vapour and maintain as dry an area as possible. You will get them free in PLA filament packs so just keep and use.

[@raydurlok6824]

Super Video! hoffe ich komme im Sommer dazu es nachzubauen

[@XXTraumfabrikXX]

Vielen Dank für das teilen :)

[@worachart111]

Richtig gut

[@dasfaultier9081]

Schick Designed!

[@Yahgiggle]

all i can think about when watching this is (i'll be back)

[@Nici619]

Danke für das neue video

[@alexrhc]

When you will get into detail with that anti spark switch .... A video i mean ... Great work by the way!

[@Pryside]

takes a few weeks, I want to make this a pcb that people can purchase or build themself easily.

[@wasserbesser]

richtig nice Bro ;)

[@nigi6009]

I also have an anet a8. I bought it 2 years ago for 170 € and it's still working really good. For remote I used a rc remote control but build an arduino nano in it for all this controling stuff.

[@Pryside]

Saw some Ender 3 Prints and for the price this is propably the best print quality. But with a Boden Style you can't print TPU, so Anet A8 stays my favorite cheap printer for now :)

[@Pyromancers]

I would strongly recommend TIG welding those motor brackets to those trucks. I had the same setup with a single motor. After about 200 km the motor mount to truck interface was so loose that the belt started to slip. I had even drilled and tapped the trucks properly with 3 set screws to hold the motor bracket. No problem since I paid someone to weld them for me. Love the build tho!

[@Pryside]

Nah, no need to. I have ridden these mounts almost 2000km in total and never had any issues. I used loctite 648 for where the mount is touching the axle and loctite 243 for all screws. Holds perfectly.

[@steffenHoumann]

Arnold.. is that you? you can't fool me !

[@David-qg8zz]

Ehrenmann

[@Hiasibua]

Hey, das Video ist gut gemacht! Ich gehe mal davon aus, dass du eigentlich deutsch sprichst, dem Akzent nach. ;-) Inspiriert zum nachmachen, weil du vor allem deine negativen Erfahrungen aus einem früheren Projekt darstellst und anwendest.

[@stevegek]

Ultimaker 3 OH YEAH

[@Pryside]

the extended version even :D but thats not mine, just the printer of the company I work at

[@les9330]

Bockt sich mega das Video zu schauen trotz englisch vorallem weil man merkt wie viel Motivation drinn steckt

[@Pryside]

Ganz ehrlich, dafür dass es jetzt so viele neue leute genießen können ists den abstrich schon wert.

[@chingg7639]

Awesome Video! And the board looks incredible! Will you make any videos on riding it with a pov camera? I would like to see more of what it can do.

[@Pryside]

actually tried that a few times before but it just looks a little wierd. I can point the camera downwards that you see the board, but then you cant see anything of the environment and everything interesting disappears. I can point it forwards and you will see the environment I'm riding towards but you dont see anything of the board. With a bike this is easy since a chestmounted gopro gives you a good sense of what the rider is riding and where, but on an electric skateboard all this sense of what I am riding disappears.

[@Prez613]

I'd be willing to pay a premium price for your hard work.

[@sparksfly77]

Me too.

[@epower5105]

That esk8 is the most complete esk8 I've ever seen congrats

[@Pryside]

thanks :D

[@diarykeeper]

Dat geman accent. Yuneec for me. Doesn't break the bank. As always... good luck eskating in ol germany.

[@chrisdianpatty2263]

this channel deserve bove milion subs and above 10 mil of views

[@Pryside]

Haha thanks :) Some day maybe, if i manage to make more often videos :D

[@xsaschaguitarx8168]

Top Meister :)

[@cityslick7]

I love my Beamer. Just bought a Boosted Stealth. This man is why I go German engineering.

[@regenbogenpupsendes1horn130]

Ah da ist er wieder mit einem super geilem Projekt!!! Mach weiter so (und bau mir auch eins 😉)

[@Pryside]

nice, mach gern n video oder esk8 builders beitrag dazu und schicks mir :)

[@regenbogenpupsendes1horn130]

@@Pryside Nee, DU möchtest/sollst mir eins bauen 😘😘😘

[@gto1874]

Make the front wheels charge the batts! Nicejob!!!

[@InfiniteSlasher]

This makes me wanna buy one and ride it, even though I don't even know how to ride a regular skateboard to start with. Wot.

[@nathanjmansfield9969]

go for it. be careful but love it. so much fun. skateboarding is a massive joy and love in my life for 30 yrs. enjoy mate

[@Rico-Suave_]

Watched all of it

[@TheJohncoffee1234]

Hey leo, Really enjoying your content! About to build this board as well! Can I ask you to do a video about the Anti Spark? I've seen your schematics, but I'm not super sure about everything...I would really appreciate a video about that :) Greets from Berlin

[@nicolaevic]

I have a 500W board but its not enough because of my weight Where do you think i can boost it? I dont know anything about it

[@drakesmith175]

Add a flashlight in the controller and possibly a small toolkit somehwere onboard for on the go use

[@klickcubuk4364]

Was geht ab jung schaut gut aus

[@Dredwam]

"you may notice it on a fidget spinner" xD... lässt sich inzwischen viel besser zuhören, englisch skills definitiv improved!

[@fazer12779]

The Evolve Bamboo gtx is easily the best electric skateboard. Atv wheel & gear options plus 30 miles of range with digital remote.

[@Pryside]

30 miles range is very wrong. they have 360Wh, thats 33Km or 20 miles of range. Maybe if you ride with 10Km/h but real world conditions are 11Wh/Km. And their old remote was very dangorous and had connection issues all the time, definitly not a safe and reliable board. I dont know how much you can trust a company that obviously does 0 testing.

[@tonileetui270]

Awesome video. i'll be back

[@maxstemberger7667]

Woher hast du die Motor Halterungen und wie hast du die Riemen Aufnahme an die Reifen gemacht

[@durschfalltv7505]

hey kannst du mir sagen wie du die battery gemacht hast? Ich versuche die in dein designtes gehäuse reinzupacken , weiss aber nicht wie ich die erbinden soll ohne das ich den ganzen strom durch nur 1streifen leite. Ich hab angst das der nickel streifen zu heisst wird!

[@anonymousvlogsprivate7090]

cooles vid

[@jeremymarks8587]

I just bought a electric longboard kit that has a 10s2p battery and 2 500w hub motors. Would I use the same TVS Diode for my board or do I need a different one since I had less power going through mine?

[@Pryside]

No you can use the same tvs diode if you want. 10S is a bit less likely to break. but if you got the normal cheap vescs I would still recommend you solder a TVS on the PCB

[@loganspartyvidoes]

Your KZbin is everything I am looking for in life!! but! Qidi tech rules!!? 😆😁

[@Pryside]

haha glad you like it :)

[@Grey_Fox_Six]

I would love to learn how to do something like this. An “electric powdered Hang glider”

[@andrewott3637]

You should sell premade sets too! I think its awesome your giving away the design for free but for people who don't want to do the extra work and are willing to pay for it you could profit off your time. Even find a 3rd party to handle all the business stuff for you, if you want of course. Will be trying my own build though! Thank you for you work!

[@philatus1]

Hi Leo, thanks for your video. It is very impressive. I have some questions: 1. in your previous video you were soldering the battery pack. Did you find any huge disadvantages compared to welding? 2. how did you integrate the smart bms? most can only handle up to 70A, but your setup must have at least the double. Thanks.

[@Pryside]

Yes, in my first eBoard and also my very old eBike I used to solder the cells, I think its still an okay option if you have a somewhat powerful soldering iron. The main reason I switched to welding is because its way cleaner and theoretically doesnt stress the cells so much. Spotwelding saves quite some space and looks overall way nicer than soldering. Even I use a 60A BMS. But these 60A are the rated constant current. Meaning 2500W constant power. Thats more than enough. The BMS can handle 250A peak easily.

[@MrKrueger88]

Wow !!!!! What an awesome job you've done 👍😊😅 How on Earth do you know how to do all of this ?

[@klorskarjar132]

Google and learn how to do it

[@MrKrueger88]

@@klorskarjar132 yes I could , but after 5 qualifications and 12 additional years of schooling I'm happy to just admire his talent. Thanks anyway