My built 450HP 6.0L LQ9 in my OBS!!

Hey everyone! Welcome to All Time Performance! This is where we build cars and trucks and test what they can do!
Some of the cars and trucks you see on this channel aren’t forever cars and trucks, we buy and sell them as well! Some of them aren’t around for long, so like, subscribe and comment so you can follow along on our journey!
In this video I do an engine breakdown for my 1996 GMC 1500 OBS. I go into detail about all the goodies I did to my 6.0L LQ9 V8! Enjoy!

[@NickDoddTV]

I recently built an LY6 with about the same parts, but used GM corvette injectors, factory coil packs, fast fuel rails, mishimoto 2" rad, 9/7 blade fans, comp cams high lift truck cam, billet banked over cylinder heads, performance rockers and lifters, short tube headers, AFM+VVT delete, stock 6L80 trans. I'm not done tuning yet and am seeing 430HP in my 2012 Sierra Crew Cab

[@deanm4138]

Very clean and sound awesome

[@Kenny_Blanco]

Great job with your OBS!! And great videos on the trucks that you all have shown. I do have a question on the drop of the truck & what is your wheel/tire setup. Thx in advance 👍🏾👌🏾

[@mattbibb9703]

Such a clean OBS, love what you've done to it.

[@AllTimePerformance]

Hey, thanks!

[@Langlois3008]

@@AllTimePerformanceHello I own a Chevrolet express 6.0 LQ4 with 90,000 miles, I live in France in a region where the climate is temperate, I do 6000 miles per year, I drive mainly in the summer, and I tow a 6000 lbs trailer, should I stick to the oil recommended by the manufacturer 5W30 or can I use a 5W40 for example???

[@marcosnavarro6975]

Great truck man great work , she’s a bad mama jama

[@obsrango]

Just bought a 6.0 for my obs…and man I tell you these prices add up QUICK!! Good video though man

[@reyreyna3555]

Great job looks killer too. May i ask what heads your running?

[@YagersAutoBarn]

All of that pretty stuff and then.....brake booster.

[@uniqueballard7996]

😂😂

[@User-esto]

For the 3rd time.

[@edtorre771]

I’m the same.. I work 6 days a week I don’t get to drive my 6.0 swapped obs as much I would want to.

[@luisbarajas7659]

I’m currently getting ready to build one as well same engine what would problems did you run in to when you first started?

[@thomaslee420]

That’s exactly what I want to do with mine

[@bri-manhunter2654]

Would love to run to a show with you, clean truck sir💪🏻

[@TheWolfMatt]

Great looking and running truck. All the details have been touched......hey.....where'd you get an old, rusted brake booster like that? lmao

[@AllTimePerformance]

I made it

[@OBSKEV]

Link to the fuel rails? How do they fit/are you liking them?

[@willyking100]

What did you use for a fuel pump and regulator?

[@whatta7793]

Do you all do LS swaps for these trucks?

[@CaptainOgg222]

What welds and backspacing?

[@obsrango]

Also what are the specs on the cam?

[@cmovezz3192]

6.0 30 over forged summit pro pistons 243 heads gonna be going in a 95 Chevy single cab.. what cam should I run? Im looking to be around 850-900hp

[@luiscervantes2062]

Where did you get your Tail lights ??

[@christophermcclellanmcclel3178]

What heads and cam are you running?

[@urnew]

6:20😎

[@nathaniellevario3294]

Where did you get the radiator bracket?

[@AllTimePerformance]

im not sure but i think the shop made them

[@michaelziegler9337]

Will the lq9 fit right into my 04 Silverado? I’m looking to do a 6.0 swap but I hear the lq9 is better than the lq4

[@jumper1294]

Same motor lq9 just has higher compression

[@bentleynorton6843]

It'll fit gotta run 93 octane though

[@Thekidsinafrica14]

Lq4 has dished pistons while the lq9 has flattop pistons for higher compression. The lq9 is what’s in the Chevy Silverado ss and the escapades while the lq4 is the 2500 line engine.

[@carlosdelao9874]

@@bentleynorton6843 why u gotta run 93? Lets say i wanna boost my 6.0 LQ9 whats the best fuel for me?

[@MrGto05]

@@carlosdelao9874either 93 or E85 if you’re gonna boost, that E85 will make quite the difference. But be aware it’s not plentiful in some areas and fuel mileage goes way down but way worth it!

[@wadeepps3443]

Sik truck bro! What size are the wheels and tires? I have a 93 GMC OBS here in New Zealand.

[@cryptical6403]

How much nzd you want for it?

[@wadeepps3443]

@@cryptical6403 no for sale sorry bro

[@CaptainOgg222]

I never saw reply on rim size or backspace,Ialso would like to know this thank you.

[@JN-53]

Would you be able to give an estimate on how much it costed you to do that engine swap? If possible could you do an estimate with just the engine and parts and then what you think it would cost for labor if a shop were to do the swap for me. If not no worries! Thankyou

[@bighurkgkb4l745]

I jus Ls swapped my obs chevy truck I bought a donor vehicle for the motor an transmission I called around about the Ls swap from a few shops an guesstimated me 14k then I found a official shop for the motor an transmission swap new exhaust all new sensors an tuning they charged me 9500 job came out immaculate truck runs like it was built that way

[@parkerlomax9304]

9500 well dam it’s high where you at

[@bighurkgkb4l745]

@@parkerlomax9304 fasho😂😂🤦🏾

[@bighurkgkb4l745]

@@parkerlomax9304 nc 🤦🏾🤦🏾

[@jrich8036]

@@bighurkgkb4l745Can u give me the shops name and location? What OBS do u own? Which donor vehicle did u get, what engine did it have

[@michaelteague7487]

What heads did you order for this setup?

[@AllTimePerformance]

prc

[@skinneyjay5451]

What are the heads youre running?

[@AllTimePerformance]

Texas speed PRC 220

[@metaworlddomination4923]

He just leaves the exhaust in your ear till it goes off😤

[@clashpro2259]

what exhaust set up do you have?

[@AllTimePerformance]

Custom 3in stainless with magna flow x-pipe and mufflers

[@davidarmstrong1427]

Who do you get to tune your ls swapped vehicles?

[@AllTimePerformance]

I have a guy here in GA that does it at his house. He is a good!

[@cer0413]

Is it cammed?

[@AllTimePerformance]

Yes stage 3 BTR

[@KhepraPuHeru]

wheel sizes?

[@AllTimePerformance]

20's

[@terrybigchopzguest]

part number for the radiator please

[@KhepraPuHeru]

please.. Radiator and fans?

[@AllTimePerformance]

I tried to find it but cant locate it. I know I purchased from summit

[@drewskiient5071]

Is this a 6.0 truck motor or car motor?

[@gabematson5490]

truck, in another video I believe he said it was from a denali

[@josedejesusgarciagutierrez1579]

That 6.0 is a lq9 it came in the Cadillac Escalade 2002-2006, GMC Denali( Sierra and Yukon, Yukon XL) and the Chevy Silverado 1500 SS

[@dereksimenac8844]

The R and Rt intakes have identical power and torque curves on tests, they do not make more low end power. kzbin.info/www/bejne/bHbNk6qvZdilo7s

[@robertthibodeaux4435]

What rear axle and ratio?

[@AllTimePerformance]

It’s the stock 8.5in 10 bolt with 3.73 gear

[@zacharyshaw570]

What exhaust setup

[@AllTimePerformance]

custom 3in stainless with a magnaflow x-pipe and magnaflow mufflers

[@wesfinn9319]

450 whp right?

[@AllTimePerformance]

give or take ever dyno tells a different reading

[@mrray7792]

450hp only?? 6.0 with just a cam and headers should be over 500

[@jaydoe9412]

It is because the intake he's running

[@AllTimePerformance]

show me a 6.0 with cam and headers making 500whp.My motor made 450 at the wheel thats about 550hp at the crank. Plus my 6.0 has -10cc pistons for boost and it still made 450whp.

[@Juanito6.0]

@@AllTimePerformancewhat heads did you run like what cc ported or polished at all

[@codyneufeld645]

Richard Holdener posts videos of 6.0l builds. It doesn't take much to get a 6.0l to 450hp. My 5.3l build had less done and made 400whp. I know it's set up for boost, but still seems very low

[@bettylouchessor2653]

How is it a built transmission if you haven't had it out?

[@AllTimePerformance]

Transmission was in the truck When I bought it. Its a stage 2 from RPM Trans