My Camera Setup for YouTube, Podcasts, & Streaming

Here's a rundown of my main camera rig that I've been building and evolving over the past few years to streamline the workflow for KZbin, podcasting, and streaming. I use this on a near daily basis and it's really made things so much easier!
🎥 Camera Rig Gear:
•Impact LowBoy: bhpho.to/3PbJGg3 (B&H)
•Junior to Baby Pin Adapter: geni.us/LUUe2 (Amazon)
•Kupo Adapter: geni.us/kupo (Amazon)
•Manfrotto 504X Tripod Head: geni.us/FpPFAE (Amazon)
•iFootage Quick Release: geni.us/PWxjAH7 (Amazon)
•Sony FX3: bhpho.to/3EJuBde (B&H)
•Sony 24mm Lens: geni.us/sony24 (Amazon)
•Kondor Blue Handle Extension: bhpho.to/3PVrLK0 (B&H)
•Camera Cage: geni.us/CsNU07 (Amazon)
•Sennheiser EW-DP: bhpho.to/43JgqkL (B&H)
•Sennheiser MKH50: geni.us/mkh50 (Amazon)
•iFootage Support Rod: geni.us/3z163fu (Amazon)
•90 Degree XLR Adapters: geni.us/WUf8pz (Amazon)
•Rode XLR Cables: geni.us/bluexlr (B&H)
•Colorful Cable Whips: www.metcalfnoodles.com
•Elgato Prompter: geni.us/elgatoprompter (B&H)
•iFootage Articulating Monitor Arm: geni.us/IWHLOZo (Amazon)
•Reference Monitor: bhpho.to/49v2Cwr (B&H)
•Ugreen Power Adapter: geni.us/8vP5wb
•Long 20gbps Cable for Prompter: geni.us/jAd1nHQ (Amazon)
Cameras used to film this video:
•Sony a7SIII: bhpho.to/3f8mMlS (B&H)
•Tamron 20-40 lens: bhpho.to/3sTzIDy (B&H)
•Sony ZV1F: geni.us/xtphyW (Amazon)
🎬 I edited this video (and all my videos) with Final Cut Pro. If you want to learn how I edit, check out my online course: learnfinalcutpro.com
🎙️And if you're interested in podcasting, I've also got a DIY podcast production course: podcasterplaybook.com
⏱️Chapter Markers:
0:00 - Rig Rundown
2:26 - Rolling Stand
5:47 - Tripod Head
7:17 - Camera
8:52 - Wireless Audio
9:35 - Boom Mic
13:39 - Elgato Prompter
14:22 - External Monitor
15:57 - Power & Cables
18:51- Wrap Up
-----------------------
Affiliate links earn a commission from qualifying purchases which helps support my channel at no additional cost to you.
---------- SUPPORT THE CHANNEL ----------
Patreon: / tombuck
Become a Channel Member: geni.us/joinchannel
Buy Me a Coffee: buymeacoffee.com/tombuck
----------- CONNECT -----------
🎯 Subscribe! bit.ly/TEPsub
Instagram: @sodarntom
Main Site: himynameistom.com
Podcasts: himynameistom.com/podcasts
----------- MUSIC -----------
•Artlist.io (2 Extra Months Free): geni.us/ArtlistTom
•Epidemic Sound (30 Day Free Trial): share.epidemicsound.com/enthus...
-----------------------
🎥 Check out my full gear list here:himynameistom.com/gear
-----------------------
- Who Am I? -
Hi! My name is Tom Buck, a lifelong A/V nerd and former high school Digital Media teacher. I started this channel in 2017 as a project to share my enthusiasm for everything related to audio and video production.
It's my goal for each video to be interesting/helpful/atleastmildlyentertaining, but I'm an enthusiast and not an expert. You can take a look at my About page to know more about my background, both personally and professionally: himynameistom.com/about
•My channel is open and welcoming to people of all races, ages, genders, and orientations. I’m glad you’re here.
•Read my Ethics Statement about objective reviews, sponsorships, and brand partnerships: himynameistom.com/ethics
-----------------------
Episode 404: My Camera Setup for KZbin, Podcasts, & Streaming

[@photobob3]

Couldn’t you just use the Kupo to tripod plate adapter (minus the tightening knob) directly into the junior receiver? That would remove the need for the junior pin to baby pin adapter and create less potential wobble points. Just sayin’/asking.

[@tombuck]

Hot dang, you're totally right! I had no idea!

[@photobob3]

@@tombuck that’s OK, you needed more grip hardware to store and organize anyway😁

[@teolopez]

As I was watching I was like hey that tripod adapter… then reads first comment… 👍🏽

[@saskelee]

Hey Tom. Instead of plugging that baby pin right up in there 😂 you could replace it with the Kupo adaptor by remove the scare from the kupo and plugging it in that same hole . It will make your set yo more lower and centered. Let me know if you prefer it

[@tombuck]

@@saskelee I didn’t realize the Kupo was so adaptable!

[@THEAVERAGEGUY1983]

Dude, you always amaze me at how kind you are showing all of us your setup and your jokes because im here for those too. Not everyone is willing to share their knowledge on they shoot video for youtube and have a very nice look to it. You are awesome, Tom. 😎👊

[@tombuck]

This is really nice to hear! I’m glad the channel has been helpful! I think it’s super fun to share whatever it is I know and then someone else can take that and do something new/interesting with it. 😎

[@BadgesForTheCross]

Everything from the tripod head down will be perfect for my setup. Thank you for this video. I 100% agree with a high quality tripod head. I learned that years ago when I was heavy into photography. Great video.

[@tombuck]

Glad it was helpful! And yeah, things like tripod heads can seem "unexciting" to buy, but they can sometimes make all the difference in a setup.

[@AndreSjoberg]

Gotta admit that's a sweet, functional setup :) Now I just have to replicate this with some 1X2's, curtain rods, velcro and tape ...

[@TechTroublemaker]

I have both a OWC Thunderbolt Hub and a CalDigit Element Thunderbolt 4 hub and the Elgato Prompter works fine plugged directly into it. YMMV (USB power hubs, nope, but Thunderbolt yes)

[@tombuck]

Good to know!

[@weathermanfilms]

Not sure if most people got the joke about the official name for the jr pin to baby pin adapter but that was hilarious. "We'll just plug that right up in there." lol

[@tombuck]

I have no idea what you could be talking about. 😉

[@adamandkathlynmiller]

#iykyk

[@tnacrew]

I came straight to the comments for this 🤣

[@meonlylouder]

That iFootage quick release system is super slick! Is that what you use to mount your mics on the wall too? I’ve been using the similarly “pro” priced, but bulkier Triad Orbit quick release adapters, which don’t include the nifty locator pins. I also found a couple of the Manfrotto pistol grip rolling stands on Facebook marketplace for unbelievably cheap. I remove the top piece to get the same “low boy” height, and I can slide multiple pistol grips to hold various elements of my setups, including lights and a laptop tray when I want. I need to do a video of my latest setup…

[@TheWarmDown_MMA]

As someone starting out building my first KZbin setup. I’m so glad you posted this. I love your one person setup! So cool.

[@tombuck]

Hopefully there are some helpful tidbits to cherry pick!

[@JamesKerLindsay]

Thanks, Tom. I’ve learnt so much from you over these past few years. (I was immediately drawn to another creator who loves blue! 🙂) You are without a doubt the best source of advice on YT equipment and studio design.

[@ThePhotographerGuy]

This is 1000x better than my setup. Thanks for all the great info.

[@tombuck]

Glad you found it useful! I'm sure your setup is awesome.

[@quirkworks4076]

I come here for the dad jokes...and walk away with an encouraging education. Thanks, Tom!

[@Mohajerhub]

Hey Tom, thanks again for this video! I've watched it again, and convinced me to build something similar. Although it costed a lot, but I'm excited for the orders to arrive and finally put everything together. One thing that I'm not sure if you're considered, especially because you use Elgato teleprompter, is to have a support for the lens. My lens (Tamron 28-75mm f2.8) is longer and I got the SMALLRIG 15mm Long Lens Support Bracket. I've also got the Manfrotto 502 Fluid instead of the one you use mainly because of the price. But to be honest, 502 seems sturdy enough. Anyway, thanks again 🙏

[@tombuck]

So happy to hear this! Thanks for the lens support recommendation too. My 24mm is fine, but if I ever were to added a longer lens (like your 27-75) it'd probably be a smart thing to have!

[@mattwruff]

It's a good setup for you clearly. Two things if you ever notice and noise on the XLR it that cheap 90 you have best to get a cable with that build in. 2nd I see if I can find it but I seen a rosette to Arri pin adapter that would allow you to connect your Spider Crab into a Arri pin so it's completely stable! I love seeing people setup you always learn something new and useful! -- Oh and I starting a iFootage support group I'm up to 11 Sprider Crabs they are so good...

[@tombuck]

Yeah the iFootaeg stuff is amazing! I'll definitely need to look into the Arri adapter because that would be fantastic.

[@WYSIWYGTvlive]

Tom, you don’t need the baby to JR adapter. The head adapter is a Jr fitting when you take out the screw knob.

[@JendaDH]

Nice video and thanks for showing what is "behind the scenes". That is indeed very helpful. I must say you're really blue color person, I like that ;-)

[@tombuck]

I like a lot of colors, but blue definitely has a special place in my heart 😁

[@ntfknd6517]

Amazing! Thank you for your idea. That saved me and others a lot of time setting things up

[@stephansagmiller5460]

So much love went into this one, thanks Tom. Could you tell us a little bit about that desktop camera support on the desk behind you? Looks handy.

[@tombuck]

It is! It's a small iFootage Cobra 2 monopod/stand: amzn.to/3PYlUDy I have an iFootage tripod head on it, but it'll work with any tripod head (I like this one because it work with Manfrotto plates). So far it's been really nice- I'd love to figure out an articulating air of some sort, but this stand can support my camera and prompter no problem, and doesn't take up much space.

[@heem3991]

Great video Tom, I’m building a small studio in my apartment and your videos have helped me a lot. Just a suggestion you can can also use the prompter as a monitor as well.

[@tombuck]

Hope your studio is coming along nicely! The prompter works great as a monitor, sometimes I don't have it connected to my computer, or I prefer to use just the script without the monitor overlay. It just kinda varies from video to video.

[@MiaAnstine]

So cool! I too have a Frankenstein set up that has evolved over time, and it’s always cool to see how others are doing it.

[@tombuck]

Absolutely! I love seeing different solutions to creative problems and stuff.

[@abennett]

This is literally the video I wanted to see. Thank you Tom.

[@tombuck]

Really glad to hear that!

[@Josh_Sattin]

I love it Tom! Thanks for sharing all of these ideas!

[@tombuck]

Hope it was helpful! Or at least interesting! 😁

[@Josh_Sattin]

@@tombuck Both!

[@OliverBerger]

What I really like about your videos (aside from the fact they are both entertaining and useful) is that you radiate pure motivation and bliss because you actually really seem to like mikes and cams ;)

[@tombuck]

Hey thanks! Yes, for some reason I've never gotten tired of talking about this stuff. Thank god for KZbin, otherwise I'd just be a crazy person annoying everyone around me 😁

[@robert_may]

That's a cool rig! I'm a big fan of the extendable arms and super clamps from Manfrotto for this kinda use-case - I have a somewhat similar rig but everything's clamped to my light's C-stand. Great for decoupling the camera from the desk, though not as portable as your setup 😅 If I had a bit more space I'd definitely be looking at that rolling stand.

[@tombuck]

There Manfrotto clamps are so awesome.

[@tiemji]

Thanks for this video. Really gives some good ideas 👍🏿

[@GuilDormeus]

I love this video! Thanks for making this! You were outStanding

[@tombuck]

nice.

[@markexploringnewstuff]

Great info as always. Tom, you make KZbin video creation look so easy

[@tombuck]

This was a fun one! Glad you enjoyed it Mark.

[@kevinvanderlei3271]

Awesome setup!

[@RyanCrossOfficial]

it would be really interesting to see a similar setup but geared towards a phone-based recording setup (or just a level down in terms of budget). Glad you mentioned why the lights we not on single stand, but would be interesting ot hear a bit more about how your lighting system works in conjunction with this setup.

[@PatrickRambles]

Hey Tom, that lowboy is exactly what I've been looking for! I love the Neewer rolling stands but, as you said, they're too high. Can't seem to find the one you have here in Europe but found an identical one from Manfrotto. Thanks!!

[@tombuck]

It's the PERFECT height for sitting and stuff.

[@levelupwithmikenewman]

Ohhh my… I’m so jealous! Such a sweet set-up!

[@ronyedin]

I love this. I have 80% of the gear and accessories you used for this. I’m going to replicate this in my small studio. I’ll DM you some photos when I complete it.

[@tombuck]

Can't wait to see!

[@Chrisreedbeats]

Love your videos Tom, another great one here! Man I want to try out that FX3, maybe I'll go rent one

[@tombuck]

It’s such a great camera! I initially wanted a second a7SIII body because it’s easier when things are the same, but it was back in 2021 when everything was out of stock, so I found one new FX3 for sale in the entire U.S. and got it. I’m so glad I did because it’s really been a terrific camera. The screen leaves a bit to be desired, but beyond that, it’s the best.

[@AerialEmber]

Curious about the frame rates / shutter speed between project, main camera, and handheld camera. Other notes: 0:21 did you shake it all about? 3:23 And judging you? 4:33 *googles* no questions 16:29 is that regret I hear? 17:53 Freedom Units only, please

[@tombuck]

I love this. I tried to match settings between the a7SIII and ZV1F, but the big full frame camera vs. a small sensor being moved a lot doesn't always look identical. Time stamps noted 😅

[@fallinmor]

Hey! It’s going to be another good day. Tom put out another video.

[@CoffeeTalkandTechJohnRyan]

Love the wireless setup with the magnet. Sounds great too and the replaceable batteries 😅

[@tombuck]

Another fun part of it is that if you have two receivers, they magnetically attach on top of each other. Ridiculously satisfying! 😁

[@Mohajerhub]

I always look for upgrading my setup and this was really helpful (and expensive 😁)

[@tombuck]

There are definitely some cheaper alternatives! Especially for the mic, camera, and lens (Audio Technica AT897, Sony ZV-E10, Sigma 16mm 1.4 for example).

[@Mohajerhub]

@@tombuck Thanks Tom. I have a Sony A7siii and a rode NT-G shotgun mic. But the rest needs an update.

[@brunomamede2352]

Really nice setup!!!

[@tombuck]

Thanks!

[@ggutt_hub]

Nice to see behind the scenes!

[@pepelsbey]

I’d recommend exploring the Neutrik angle connectors instead of adapters. I used to think that you need to do soldering to replace connectors, but you don’t! It’s quite easy to do and the result is lighter and compact, compared to the adapter. Though it might not be cheaper 😅

[@tombuck]

I'll have to check them out!

[@sabatino-dev]

7:50 The Sony g master 24mm frustrations are so real 😭 mine is currently at the service shop for the second time in warranty for issues with the focus motor

[@tombuck]

I knew I wasn’t the only one! Thank you for making me feel slightly less crazy.

[@dymonmein]

You have a little redundancy there. You can remove the butt plug and stick the tripod mount straight into the junior receiver. Just take out the set screw. That’s actually how that’s piece is supposed to be used. Nice rig!

[@TheWarmDown_MMA]

Cool to see a Aquabats poster in the back!

[@tombuck]

So much merch 😁

[@patriciaort9172]

This is exactly what I need to know. Thanks!

[@tombuck]

Glad it was helpful!

[@mikelee23544]

would love to see a video on YoloBox's new Ultra! Maybe a test live stream with it first?

[@tombuck]

Definitely in the works! I’m a bit distracted by NAB at the moment, and there’s so much to cover with the YB I don’t want to rush it.

[@koenignero]

This was very valuable. I would be very interested in your post production workflow as well.

[@tombuck]

Crazy timing- I was just thinking about this yesterday. I have a workflow video from several years ago, but it’s probably worth updating, so that’s something I want to do soon!

[@koenignero]

@@tombuckI am exited! :) I am espacially curious how you do the Audio Post Production.

[@keiz_]

Loved seeing a breakdown of your setup! Thanks for the video! Out of curiosity, do you think you'll check out the Shure MV7+?

[@tombuck]

I’m not Shure 😁 I’d like to and it seems quite awesome for what I’ve heard.

[@randyrektor]

New layout is looking great! How are you finding the rolling around on carpet?

[@tombuck]

Not an issue at all- I've had this stand and a few of the others for quite a while. I like that the carpet actually helps keep things in place easily.

[@ericprice6526]

Great video, Tom! I am really digging the Lowboy. I currently use a short stand that sits on my desk, but that also really limits which lens I can use in my GH5 because of the relatively short distance. I am going to have to check that out. I am guessing from your comments in the video that the higher stand would be capable of being set up the same way if I was looking to use that for fixed secondary cameras on a shoot (and reducing the footprint from all of those tripod legs. Is that correct? Thanks for continuing to educate us!

[@tombuck]

It's been great! The mounting and everything is the same between the tall/short stands, so it's really just the height and the tall one I have doesn't have a built in baby pin.

[@ericprice6526]

@@tombuck Excellent! I think I will grab one of teach and try them out.

[@DarkCornerStudios]

KZbin setup goals...my setup is a bloody dogs breakfast in comparison...lol

[@tombuck]

Haha, that's not true at all! But I love the term "dog's breakfast."

[@DarkCornerStudios]

@tombuck heard it from a guy in his 60s...back in the 90s...so...I am sure it's still relevant and hip. As for my setup...yeah...it is a mess...but planning on some sorylt of cleanup in the future. I may get one of them rolling tripods

[@ItsBeerDrank]

Looks a LOT like my setup, however I have been wanting to figure out an overhead booming solution for a shotgun mic.. what type of arm is that holding the rode mic go ii? *edit* iFootage Support Rod.. cool. Awesome informative video as always!

[@AM2PMReviews]

00:14 So...Let's get Buck wild!

[@kylemckenna]

Thanks for sharing, Tom! Do you have any sound treatment in your room? Would love to see more about that.

[@tombuck]

I don't have much to be honest. Most of it is the carpet and objects in the room, but I've experimented with a lot of different things and what I've kind of landed on for the past few years has been: •Sound blanket covering window. It's behind the paper backdrop. I never use the window, so I covered it with a sound blanket to block out sound and light and then hung the backdrop in front of it. •I have a 2' x 4' sound panel from Acoustimac.com on the wall that I face (it's actually on a closet door so I can slide it around a bit). •I have another Acoustimac panel on the ceiling directly above me. I noticed sound was bouncing from the wall and reflecting off the ceiling, so these two panels helped a lot.

[@kylemckenna]

@@tombuck thanks so much for the feedback about how to reduce sound feedback....LOL

[@jamiehayes6714]

Love it! What lav mic are you using?

[@tombuck]

It's the Sennheiser "Essential Omni" with the EW-DP wireless system.

[@NadimALMallah]

Great setup as always… the one thing i was disappointed from is the elgato prompter that only function with computer.. at least if they gave an option for bluetooth connection or wire with ipad to make it more mobile

[@tombuck]

I think that's a tricky one. I definitely get it- but at least for now, having the whole thing run via one simple cable is fantastic. I don't think a tablet could power the prompter, so they would then need a separate power supply, which in my experience is always annoying. Although...now that I think about it, having a second USB C port just for optional power could be neat. It's there if you want it, but not required.

[@LawbossProductions]

Enjoyed the video. Missing, however, is how you are able to both use the external monitor (via hdmi port out of the FX3) and yet still 'stream' (for example using Ecamm Live -- as you've taken the only hdmi port out from the FX3 for the external monitor).

[@tombuck]

If I'm running to Ecamm then I don't use the monitor

[@LouisLuzuka]

That thumbnail 😮

[@tombuck]

I tried something a bit different, but happy with how it turned out!

[@LouisLuzuka]

@@tombuck me too it’s glorious 🥰🫶🏽

[@rocus80m]

Great Video - but how do you see on your computer what you film at the same time? Thanks

[@Bruce-Weinberg]

@TomBuck I want to duplicate this setup with one change: I need a longer boom arm for mic as I’ll be using this standing up at a greater distance from camera. However, I’m struggling to figure out what connectors I need for the boom. Any advice/guidance? (I’m happy to purchase all with your affiliate links if that would help…I’ll even buy you a cup of coffee…I just need help). 🙌🏻

[@H76Pro]

The only thing that would make me nervous is that 3/8 thread on the kupo adapter whether it can hold all that weight on top of it and not break.

[@tombuck]

It doesn’t seem any different than any normal tripod base, so I wouldn’t worry. Kupo is a pretty standard name when it comes to grip gear and have been making this stuff for a loooooong time.

[@princeg88]

Can you do a video with a iPhone 15 pro max setup? With an audio interface, shotgun mic and external monitor.

[@tombuck]

I don't have the iPhone 15 myself, but I can experiment and see what I find.

[@SteveSantoianni]

hey tom. can you tell me what brand metal drawers you have? like the red one in the background? I am looking to buy some.

[@tombuck]

They’re Crafstman from Lowe’s 👍

[@koto9x]

You would be good for Blues Clues

[@tombuck]

I'll take it!

[@thejoshthat]

Tom, what's up with RCP2 1.3.4 firmware update?

[@stephansagmiller]

Would you still recommend that Manfrotto head for smaller cameras I.e. FX 30? Does someone make a smaller version?

[@tombuck]

The FX30 is the same size as my FX3, so I would. The Manfrotto 501 is also a good option, it's a little smaller and cheaper but still has some additional mounting points. The 504 has just been absolutely phenomenal for me though, and I love never having to worry about it being able to support anything.

[@pretzelcoatl]

How have you gotten the Elgato Prompter's ring mount to work with your lens? According to the Elgato manual, the ring mount isn't compatible with motorized lenses. When I try it with my Canon EOS R (and Canon lenses), I immediately get a lens error as soon as the lens tries to move with the prompter hanging off of it. I've tried with several Canon lenses. It seems you're not having this problem, though. Any ideas?

[@tombuck]

It depends on the lens- if the ens has internal focusing it's no problem, but if the end of the lens rotates when it focuses, then it's an issue. Fortunately my Sony lens is all internal.

[@pretzelcoatl]

@@tombuck Thank you! I take it you don't have to turn off autofocus, then. Do you know if it's generally the case that Canon lenses rotate while focusing? I'm not sure how to identify which lenses do that without trying them in person (and I only have 4).

[@user-cn2re4jn6j]

Anyone have a suggestion to a reasonable alternative to the camera head that would offer the same versatile ability with the i footage arms and such? Great info, beefy setup that would last for sure

[@tombuck]

you can probably do something similar with the Manfrotto 502AH. It doesn't have the locking pin mount, but does have a 3/8" mount on each side.

[@user-cn2re4jn6j]

@@tombuck thank you. Kudos, one thing that stands out to me about you is your willingness to stay connected to the audience. Says a lot and sets you apart in my opinion. Keep being awesome!

[@Tech4YourNeeds]

Do you have a more affordable Fluid Video Head? I'm going to use my Sony ZV-1 with this rig.

[@tombuck]

The Manfrotto 501 is pretty great- but I wouldn’t go much lighter than that if you’re planning to attach anything besides a camera to it.

[@rocus80m]

But how do you connect the prompter on this moving rode to your mac? I purchased the prompter as well, my problem - I am to close on my desk to the prompter and everybody can see my eyes moving, which is bad :/ So I stopped using it for now :/

[@tombuck]

I use a long USB cable 👍

[@khoonchaii-businessonlines5467]

I watched your video about MKH 50. Now I got one finally. The problem is Rode Caster Pro (1) can not give it enough power to have the sound comes out even I had the volume up to the top. Can you give me some advices on this? I've been using it with Rode NTG5 and never have any issues like this.

[@tombuck]

Be sure you have phantom power turned on- the 50 is a condenser so it doesn’t require much gain (maybe 25-30dB).

[@khoonchaii-businessonlines5467]

@@tombuck Where do I turn the phantom power? Is it on the 50 or on the Rodecaster? Thank you!

[@khoonchaii-businessonlines5467]

@@tombuck I got it. It's in Rodecaster Pro Setting. It works now! Thank you so much Tom!!

[@khoonchaii-businessonlines5467]

@@tombuck One more thing if I could ask Tom. I also use FX3 for main camera. But I did not do KZbin I only use it for Zoom meeting. I been having a problem of how to get the picture and the sound synced. It is a delay with my mount and the sound when see in Zoom but it looks totally ok on Camera or on the switcher’s screen. But people watching from computers see the delay. I think it might be about the setting on camera like the frame rate or something. Yet I still can not fix it. Could you kindly give me some advices how to fix this! Thank you so much!

[@WhenWillILearn]

Doesn't the Kupo adapter fit straight into the jr pin hole or am I miss remembering?

[@tombuck]

No you're right! I didn't know that and someone else in the comments here pointed it out. You just need to take off the tightening screw. Brilliant!

[@WhenWillILearn]

@@tombuck I though it was, they're usually pretty good at making it like adult lego. Sorry I didn't want to be a know it all. Great setup, got some really useful takeaways too!

[@ItsRyukin]

Well, There's something I want to share about. I made a low cast camcorder rig that I ever made, It's really simple. I have a mini wireless mic set (Comica Boom X-D2 here in this case) and I have an idea that I'm going to put it on an elastic band on the battery. (An InfoLitihum V battery) How I did it? Well, It's simple. I put an elastic band on a camcorder battery and clipped a wireless receiver onto the elastic band and that's it, I can control an audio gain from there and I even got 2 audio monitor jacks. (From both my camcorder for more accurate playback and a wireless receiver's monitor audio jack for a real time audio playback. 😁) The mics are, Well. I could either choose one for a lav mic or a boom mic. (It depends on a setup, I can't really tell) There's a video on my KZbin Channel that I’ve covered about so you can go check that out if you want. =)

[@airtime23]

DId you work without a teleprompter before getting the Elgato?

[@tombuck]

Yep. I mainly use bullet points for my videos, so I just had the Notes app open on a monitor next to the camera, but the Prompter makes it much easier to keep my place, which speeds up the whole process. It's also absolutely incredible for video calls!

[@airtime23]

@@tombuck Thank you :)

[@stas.sultanov]

Just wonder regarding the stand is that the same as Kupo 370M ? We don't have Impact here, so looking for closest analogue. Or maybe someone knows original manufacturer in China...

[@tombuck]

Oh wow, it looks VERY similar. Impact is B&H's "house brand" so I wonder if they just relabeled a Kupo?

[@stas.sultanov]

@@tombuck Maybe, but Kupo costs more. My gut filling says that all of them are made by uncle Lao form China on the bare same plant. Just fyi, Manfrotto actually has nearby(exactly) the same stand Manfrotto Avenger A5012 maybe this is the original which has 'inspired' everyone else.

[@rocus80m]

17:02 BTW Sony's dummy batteries are crap - I use the small rig dummy battery for my ZV-E1and it works like a charm

[@alanflores7400]

Pllzzzz do this with a light attached I want help I only need camera, teleprompter, light. My mic is just a simple rode wireless go.

[@tombuck]

Kupo makes A TON of different adapters. You can find one that would support a tripod head and a light, which would be great.

[@alanflores7400]

@@tombuck thank youuuuu

[@thethirdrailchannel]

A great setup but your looooong XLR cable really bugs me. Shorten it to the correct length!

[@tombuck]

The correct length is the length I need- sometimes the mic needs to be positioned away from the camera rig.

[@CriticasDeCineEn2Minutos]

What a thumbnail ! Thank you for always adding fun and colors to this "cinematic mood" KZbin trend nonsense.

[@Vanderful_life]

When you said the brand you laughed and I’m not sure about what I hear Meth hat noodles ?

[@tombuck]

Sorry about that: metcalfnoodles.com

[@saskeleephotography9019]

But since you have a kupo adaptor you wont need a but plug.... lol i had to say it