My Complete Wedding Ceremony Gear Walk-Through

[@drik165]

I have a similar setup as that, but check out the shure blx1288/w85. It can be powered from the speaker and has a lavalier for the officient and a handheld for the bride and groom! Work on 500 to 600 hz frequency... never had a drop out even at 60 80 feet in a ceremony.

[@Justin_TheDJ]

ill have to check it out!

[@izzyduzzit00]

Question if you have 2 mics. One for groom and one for officiant. What do you do for bride ?

[@harmrosebrock9477]

I need an answer for that two :D

[@Justin_TheDJ]

You never put a mic on the bride! When the Bride & Groom do their vows, they face each other. You use the Groom's Mic

[@izzyduzzit00]

@@Justin_TheDJ so it picks up from the mic the groom has on or does he take it off for that moment?

[@djgreigza]

@@izzyduzzit00 Yeah it will pick up the bride. The mic is omnidirectional so it will easily pick up the bride and groom as they face each other.

[@izzyduzzit00]

@@djgreigza thx for answering my question as I normally use a handheld but thinking of going this route in the future

[@mattsavagedj]

The rode handle is pretty clutch actually haha.

[@Justin_TheDJ]

yeah man especially when you get like a last second Reading from a family member, just clip on the mic and youre good!

[@djgreigza]

@@Justin_TheDJ I've recently picked up the Comica Vimo C (the 2 mic to 1 receiver unit). Similar to DJI. These 2.4GHZ mini mics work so well, I must admit I was sceptical.... It's great not needing to wire a lapel and belt pack, just attach the mic to the groom in 10 seconds and good to go !

[@djcalvin681]

Thx for sharing Justin , I be use Yamaha mg06x mixer, laptop for audio and Sennheiser mic 🎤, use either EV 50 or Yamaha Xdr10 for speaker

[@Justin_TheDJ]

nice man!

[@KarleaLove]

how does that dji mic work compared to the rode wireless go, I wanted to use the wireless go and the handheld as a backup mic whilst djing but found the feedback unusable

[@JoeS795]

How'd you get to that screen on the Everse app with the volume sliders? I haven't been able to find a screen like that.

[@Justin_TheDJ]

I think its cause im using an older version of the EV app lol

[@Integrityce]

How did you control the DJI mics by muting them via another app?! That's crazy. I'm assuming it was the two XLR's? May need to forgo my ceremony rack and just do something even smaller since I already own the DJI mics.

[@LEVIJmusic]

Love it!

[@Justin_TheDJ]

thanks man!

[@yurytitarciuc4540]

Can I get your music library please

[@NOTAX227]

👍 Nice, discrete and small, no ugly camping-table and rack setups next to the guests. The Everse8 looks so clean compared to fx the Wave8 recently promoted at a similar video at the "AlphaTheta promotion YT-channel" (aka N Spinelli 🤣). Impressive with just that little DJI receiver, line of sight from top of the speaker probably also helps a strong signal..

[@Justin_TheDJ]

Thanks man! Nick is cool dont hate on my boy lmao

[@NOTAX227]

@@Justin_TheDJ No hate at all 😉 Just saying seeing you with only a tablet in the hand (at 5:35 in the video) make you disapear compared to a "soundtech dude with rack, campingtable and chair setup". With a black jacket on almost blend in 100%, only the ipad would have revealed you as the sound-guy ....... discrete/stylish👍

[@djbeat1]

🔥

[@Justin_TheDJ]

thanks bro!

[@NathonJones]

2:55 What do you mean by daisy chaining another speaker? I didn't think mics would work connecting to another Everse?

[@bboymac84]

Maybe connect them with a SKAA transmitter via a mixer? Not sure if the EV Everse 8 can send mic audio from one speaker to the next. Hmmmm 🤔

[@NathonJones]

@bboymac84 pretty sure it cannot. Only music via Bluetooth. Just wanted to see what JtDJ did.

[@bboymac84]

@@NathonJones yea I’m curious too. I’d use SKAA transmitter but I’m sure he didn’t use a long wire

[@izzyduzzit00]

He meant xlr out of the everse to another everse xlr in. Probably using a wireless transmitter like xvive or shure

[@bboymac84]

@ that’s what I said basically

[@pauloliphant7725]

Love it! Thank you! When I split screen with the EV app and Spotify, the all channel view (like you show in the video) disappears and I can only toggle between each individual channel for volume control/muting. Can't seem to figure it out. Am I missing something?

[@Justin_TheDJ]

Ive had a few people mention this to me, what I found is I actually am running an older version of the EV app that lets me do this! Im never updating!!!

[@LEVIJmusic]

Did you hit the Edit Mixer button in the EV app after split screening?

[@leonzalirchirl2828]

Hello Justin the DJ I’m a DJ thinking about creating my own website for DJ bookings and to promote my KZbin channel and I was looking at your website and was wondering if someone books you for a day you’re already booked will the website tell them that

[@jordanbluse1600]

With the EV app, are you able to control fx like eq and compression??

[@JoeS795]

Yes

[@Justin_TheDJ]

yes!!!

[@tovyaweissberg47]

On the iPad are you using algoriddim djay, iTunes, or are you using a 5G tablet plan to just use something like Spotify or Tidal ? Have my first wedding gig next month and will be providing music for an outdoor ceremony no microphones needed, I will be using a new iPad M2 air with a JBL partybox 110 on a tripod stand... don't come at me for the party box I've invested money in the main setup and don't have anything left for outdoor ceremony speakers at this time.... I have a 1-acre property and recently had a party with almost 70 people the party box 110 got plenty loud it can easily get loud enough to where people start having to talk louder so they can hear each other over the music. There will be 70 people at the ceremony sitting quietly in their chairs no doubt they will hear the music loud and clear

[@izzyduzzit00]

If you don’t have a hotspot, to be safe download the music you will be using for ceremony to your iPad then use the djay app if you have it.

[@bboymac84]

Def need that stand💪🏽

[@Justin_TheDJ]

its so nice!

[@bboymac84]

@ I feel that’s the new standard for speaker stands now

[@newtonghse]

Almost identical to my wedding rig Just shure mics instead of

[@Justin_TheDJ]

nice man! Solid!

[@djdere-lnk]

The bluetooth range on the everse 8 is trash

[@DJDjayVarela]

Justin very informed video… This is not a criticism Just a feeling I got after watching your video and also Nick’s: This is why people don’t want to pay DJs…!!! Thanks for your videos

[@Justin_TheDJ]

I get what youre saying. People see the video and say "i can do that" Until they have to actually do it, then they understand why we charge what we charge

[@djdevere]

Yes, this is all you need for a ceremony setup. A lot of DJs have racks and all this bs, which isn't needed with today's technology.

[@Justin_TheDJ]

hey man if it works, it works!

[@DjBrianProductions]

Wow how creative? Nick Spinelli just made this video lol 😂

[@pauloliphant7725]

So only 1 person is allowed to show their ceremony set up? If you watched both, they are very different set ups. My set up is a little closer to Justin's than Nick's but both vids where helpful.

[@DjBrianProductions]

@@pauloliphant7725Justin has great thumbnails

[@Justin_TheDJ]

lmao just how it worked out I guess. I filmed this on 9/21, you can see it in the top corner of the ipad around 5:00

[@DjBrianProductions]

@@Justin_TheDJdamn my guy got receipts haha 😆 cooked

[@DidierWolfs]

Sorry, but using bluetooth mics for a moment that important, when you want to make 150% sure there will be no issues with the drop outs is a NO WAY. There is a middle between high end mic system and a DJI… Sorry Justin, but as much as I really enjoy your contents and personality, I have to disagree on this one. On top of that, it’s showing to your customers how simple: hey look at how simple my setup is and I install it in 3 minutes (even, we know it takes longer + the biggest part is prep), but that gives « negative » feedback to your customers. And at the end, hey are the ones that brings $$ and not us watching the video ;-) That said, I give you a 👍 because it’s still quality content ❤

[@Justin_TheDJ]

Hey man thanks for the feedback. I totally get what your saying from the customer's point of view. That being said, a good chunk of the weddings I do I throw in ceremony sound for free. When it comes to the actual ceremony: I've been using this setup for years. Like I said in the video, I know the range can be an issue and I always keep that in mind when doing a ceremony. Other than the range, the setup works great and ive never had an issue with it. Along with multiple compliments from clients, i think the setup that I have is sufficient to get the job done. Again thank you for the feedback I really appreciate it!

[@DidierWolfs]

@ Hi Justin, Thanks for taking the time to post a detailed answer :)