My Customer's PC is BROKEN - NO POST - CAN I FIX IT???

[@nawazdizasterpiece]

Similar issue with my last build. The mobo was a h510 board so only two slots. Installed two DIMMS. No post. Installed only one dimm, It would post with only one particular slot. Thought the mobo had a faulty slot or something was faulty with my CPU memory channel as i bought it used and untested at a steal price. Removed the cpu to for a quick inspection and to check for bent pins in socket. Everything seemed fine so i reinstalled the cpu and reseated the cooler and VOILA! Problem solved. System posted with 2 DIMMS. Did an online reseach. Turned out reseating the cooler solved the issue. Uneven pressure when tightening the cooler can cause the cpu not to be seated properly and thus not making proper contact with socket pins and as a result simulate symptoms of a dead cpu memory channel. Always ensure to not overtighten the cpu cooler. Proceed in an X pattern and equal tightening torque on all screws. Give it a try if u facing similar problem.

[@samfillingham9250]

I was confused for a second because when I saw the thumbnail I thought it was a Greg Salazar video.

[@PCTechHustle]

He is the man! But hopefully you liked mine!

[@samfillingham9250]

@@PCTechHustle of course, good job.

[@Herlander25]

sometime whit the heat ,,, the gold metal contacts get loose.... and i dont see any front ventilation puting fresh air into the case .

[@nihren2406]

Just built a brand new PC and I ran into the same issue which led me here. It doesn't post at all. I have an MSI X670 board and I get the post code 00, a red light for the CPU, and a yellow light for the DRAM. There's also a burning smell that I cannot pinpoint the origin of, but the AIO pump does make a very faint clicking sound like it's not getting enough power so maybe its burning itself out.

[@PCTechHustle]

Even if an AIO is burning out it shouldn’t prevent a bootup. There should be some native heat transfer that in theory should allow it to run. If it’s shutting off quickly after bootup then I would say it indeed is the cooling solution but seems like something else is going on here. Feel free to join my discord and me and others can help work you through this!

[@larz4111]

@@PCTechHustlesound like the psu

[@PinkyTech]

Good troubleshooting. Probably would have run a memtest to verify no errors too, but probably overkill.

[@PCTechHustle]

Yeah in hindsight I should have done that for sure!

[@McGorm14]

And check the event viewer for memory issues once bootable again. Would have thrown a code for sure I would think

[@rogergeyer9851]

Glad to see I'm not just stupid for thinking that. I don't know much about fixing PC's, just swapping some parts now and then, but stress testing things that get flaky helps find intermittent problems.

[@saeedmir9231]

this man deserve so much more!

[@PCTechHustle]

Thanks so much!

[@jimgom3337]

Great content, you got a new subscriber !

[@PCTechHustle]

Thanks so much!

[@informedconsent8614]

Looks like the board is flexing quite a lot when inserting the ram, maybe it doesn't have all the standoffs fitted? But I agree I think the Ram slots were cleaned by re-seating.

[@fatjaysgarage]

what if the computer randomly posts and randomly doesn't? just rma'ed my ram kit and now it works but somtimes it has to restart several times before i get the post screen

[@nicholasriha2039]

awesome vid! I am here to follow up, is that pc still doin good? 😁

[@PCTechHustle]

Thanks! As far as I know it’s going just fine! I haven’t heard from the customer since I gave it back.

[@JMark4]

Where’d you get your foam hexagon panels from?

[@PCTechHustle]

Amazon. Elgato wave panels: amzn.to/3v2Cvf0

[@moonwalker1352]

im sorry to bother you but i really need this , i want to overclock my ryzen 5 3400g on gigabyte b450m ds3h i dont find cpu vcor to undervolt it , there is manual overclocking option there i need to put cpu voltage and frequnecy do you recommend me to use it ?

[@PCTechHustle]

You might find this video I have done on just that helpful: kzbin.info/www/bejne/qJq7q6qNgb2Sfs0

[@moonwalker1352]

@@PCTechHustle I really appreciate it

[@RazorQ10]

My motherboard RGB light is on aswell as my gpu has 2 white lights on but if i press my power switch nothing happens any help please I also put in a new 32gb kit of ram aswell as a new nvme and also a rog strix 360 aio Installed the new windows played a few cod games After switching pc of it wont start back up if i press the power switch It dis this prior to me replace the storage and ram I installed new thermal paste And also a new psu 750 w Specs is a ryzen 5 3600xt Rtx 2060 super strix edition 32gb 4133mhz ram 1tb nvme 750w psu Asus strix b450f gaming mobo

[@osnopuppy]

Should I buy one of those Chinese $60 motherboards. I'm buying a 4th gen intel cpu. (The mobo won't allow allow overclocking)

[@PCTechHustle]

Those can be a bit of a gamble. I’ve actually been wanting to check one out

[@userbosco]

There was a know BIOS issue w/ AMD boards when upgrading from 3K to 5K CPU's. Happened to me, had to flash the new BIOS, fixed it, easy peasy

[@PCTechHustle]

Yep that was early on when the 5000 series Ryzen chips were getting released. The issue with the PC was not that though. Seemed like some fault / dirt with RAM interfacing with the motherboard.

[@Tiger2100]

I would check the outlet that it was plugged into...It probably tripped.

[@graz2675]

I had the same issue before and I've seen this issue a lot from other people too. I tried swapping the slots and it would work. But then it failed so I had to use 1 RAM, then won't post again till I couldn't use my PC at all/ I bought a new motherboard thinking that would fix it because I thought I had bad dimm slots but it turned out that cleaning the RAM with an eraser would fix the thing.

[@PCTechHustle]

Thanks for the input! Yes I too have also had issues like this before where the dimm slots might have accumulated dirt, etc and causes a dimm to stop working. It makes perfect sense if you think about it

[@grantg98]

Bios update. I've seen a problem like this on Greg Salazar's channel. A bios update fixed it.

[@Dyllv]

my pc doesn’t post too, i have integrated graphics from my ryzen 5 5600G, i have a pre owned mobo. 16 go ram brand new, cpu brand new, power supply brand new. it turns on it just don’t post

[@Dyllv]

actually my power supply is from my friend’s neighborhood

[@PCTechHustle]

What ram speed are you using?

[@RC360]

What mobo is it and what is the bios version? Most out of the box AM4 mobos need a bios update to run the 5000 series APU and some need it for all 5000 series.

[@Dyllv]

@@PCTechHustle 3200mhz

[@Dyllv]

@@RC360 Asus b450M-A

[@DBR00]

Never understood why bloggers think it’s good to add background music to these videos, especially on troubleshooting or how-to. Everyone that is watching these videos most likely have an issue and adding distracting unnecessary background music makes it very difficult to follow along. Aside from the music, you have an otherwise good video.

[@PCTechHustle]

Sorry? I mean... the music is at -35db... Thanks for watching anyway :)

[@JeffWaynee]

Always happy to see new vids from you man! And I actually just built myself a brand new rig a week ago. i5 12400 with a Hyper 212 - 32GB Corsair Vengeance LPX DDR4 3200 - Asus B660-Plus D4 - Asus RTX 3060 Dual OC - 8.5TB storage (4.5 is SSD) - Fractal Define 7 case. About 1800 all in.

[@PCTechHustle]

Thanks! And dang sounds like a pretty solid build you got going!!!! :)

[@JeffWaynee]

@@PCTechHustle Yeah, it's a great rig, and the 12400 is a beast. My now secondary rig that it replaces has a Haswell-E Xeon 12C/24T, and the 6C/12T 12400 has 27% better multicore performasnce and a whopping 228% better single core performance. And the thing I love about the 12400 most is that if you keep it well cooled it will literally never go below 4.0GHz even though the base is 2.5GHz. The 12th gen is amazing.

[@PCTechHustle]

@@JeffWaynee Yeah 12th gen is very impressive indeed!

[@Tarkin55]

I got this build with a 3070 instead for 1300$ but it only has 1 TB

[@necrowolfgaming2494]

I used to have to completely remove my RAM and reseat the sticks every three months or so with my old AMD FX board because it would just quit working. I had to do that for about three years that I had it. Was I possibly cleaning the slots inadvertently when I did this? Who knows? I have not had that problem with my Ryzen 5 setup in the two years I've had this one, knock on wood.

[@PCTechHustle]

Yeah I’m hoping this issue doesn’t come back 😬😬😬

[@amourizeheystek9933]

A good tech would of Done a scan to verify memory is good even after a conclusion was drawn.

[@PCTechHustle]

You are right. I probably should have taken the extra step of doing a mem test. Luckily he lives close should there be any more issue.

[@amourizeheystek9933]

Wow new sub gets a comment and a hart on first vid.

[@PCTechHustle]

😉😉😉

[@lactobacillusprime]

Ryzen 1000 series is quite particular with the memory. Possibly reseating the memory probably cleared some tolerances that prevented the PC from booting. :)

[@PCTechHustle]

Possibly!

[@nunjafam]

Absolutely no chance dust in the dimms was the cause. What it actually is who knows, 100% wasn't dirty dimms.

[@PCTechHustle]

Hard to say

[@fortypersec]

DId you just switched off the PSU without shutting it down properly?

[@PCTechHustle]

Yes, it won’t hurt anything. Might not be good to do many times over though

[@fortypersec]

Okay. I get you, but come on. I always deal with customers with bad and corrupted HDD/SSD with this kind of practice.

[@nez1703]

I thought I'd imagined it so went looking for it in the comments. Come on man you're asking for trouble - that's someone else's data!

[@IbadGrammarX]

my pc right now

[@williamwaleys865]

He probably played roblox. The issue might occur randomly again.

[@KomradeMikhail]

MemTest86+.....

[@PCTechHustle]

You can only do that with an operating system. But a good point to run that check after.

[@richteritwan]

Dead memory channel?

[@dmanpc1379]

BIOS update

[@PCTechHustle]

Could be something I’ll have to come back to doing… but so far so good

[@stevo728822]

Lol...that was funny.

[@MoneyTalks65]

H A N K

[@PCTechHustle]

Huh?