My F100 Is Getting a NEW LOOK!

We're going all in for the next Goodguys nationals at Del Mar and this gave me the perfect opportunity to get all the things done that I have been neglecting. Can't wait to show you all the finished product!
-
CHECK OUT MY COUSIN MICHAEL'S KILLER '69 MUSTANG FASTBACK PROJECT!!!
/ @abouthorsepower
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
iNSTAGRAM
@thecraig909
@carrnagge
-
music by : soundcloud.com/jeff-kaale
music by: / joakimkarud

[@armelind]

When my Father passed late last year, I got his pickup. Its 1967 Ford F100 with a 1972 Mustang Mach 1 351 Cleveland motor. Its still at my fathers home 4 hrs away. Needs some TLC before I can drive it reliably. I cant wait to get it home!! Eventhough I am a Chevy guy, my family's Ford truck is like my pride and joy because it has been with the family since new.

[@merritts3515]

Dad being a dad at 0:41😂

[@nomad74777]

Awesome video. I'm also restoring a 1971 F250. I appreciate your vids.

[@johnpassmore8176]

I'm a new subscriber and glad I did. I've got to tell you this. I built a 91 prostreet Mazda b2600. I was cruising to my sons and happened to see a bunch of old cars and trucks. There was 2 that really caught my eye. So get ready for this!!! It was a white 71 f100 short box with a 351 M in it. And the other was a 64 Galaxy with a 390 in it. Is that a coincidence or what!!! I traded my prostreet for the 71 f100. This truck only has spot surface rust. Not original motor but that's ok. Sat in a barn for 22 yrs. Yep love the f100's. So be watching your videos

[@davekimbler2308]

Who cares what other people like as far as your truck ! The KEY word is YOURS ! Maybe as long as you had your door off ya could have worked that dent from inside also ? Did ya find those galaxy parts you were looking for?

[@tylerswan7410]

I like the patina on the outside and I'm glad you're keeping it that way. It adds character to the truck. Nobody cares about a factory fresh farm truck.

[@sivart481]

Hey there Craig, great work on the Bump. Dupli color is expensive but not bad paint. I have been doing alot of research on Touchupdirect paint and they match factory for greater savings without cheap materials. Keep up the great work. I transfer back home to San Diego this summer and look forward to tinkering on my 1970 F250. R, Travis

[@stoveboltlvr3798]

That's a door sill plate. truck looks and sounds good!

[@jamieround2072]

@ 4 04........ WE SEE U ALL GOING NUTZ W/ THE AIR & ELECTRIC SANDER'S........ WONDERING WHY U ALL NOT GO THE EASYER & A BIT FASTER WAY OF PAINTING ON PAINT STRIPPER W/ A BRUSH.... ALL THAT STUFF WOULD COME OFF W/ IN MIN'S IF NOT IN SECONDS.............LOL

[@cumberlandshore]

Love patina on trucks. It’s your truck dont let people get you down on what you want to do with your build.

[@japple6779]

and please dont paint the roof black I saw in an old video you said you want to paint it black but I think if you do white and patina too match it would look great!

[@TheWolverine-rm2kr]

Or just paint it with red primer then mist some white paint on top

[@futuregohan9662]

Its his truck

[@pinkamenadianepie8609]

id clear coat the out side rust on the hood, roof and fenders for that rustic look but fix the holes

[@fortitudegarage8956]

Loving these f100 vids Craig! I love the rust/patina look & how you re-did that look on the box! Among many other '60s-'70s F series pickups, my dad has one basically identical to this besides being a long box. Its an all original Arizona truck. Definetly in great shape compared to what we typically see here in Nebraska! Keep up the Great work buddy!

[@japple6779]

im about to 4 barrel swap and redo the engine bay on my 71 f100 thanks to your videos I think I can pull it off keep the tips coming!!

[@jamesbascombe8274]

There is another piece of weather stripping that goes on the door as well.

[@griffparker1466]

Hey Craig, I’ve got a 1962 Galaxie 500 4-door I’m parting out at the moment. Good, complete car and has a bunch of good parts. If you like, let me know some things you need for your 64 project and I’ll see if I can help. I noticed you said you needed a heater box. Big fan of the channel, cheers!

[@450rking6]

I love the videos keep up the good work

[@fbs1926]

Great video been waiting for an update on the truck. Can’t wait to see all the other goodies planed for the truck in the future.

[@dustyvape.9238]

I'm buying a 1970 Ford F100 sport custom with a three on the tree. I'm really excited for this purchase.

[@angelg422]

Damn man!!! To see how far you’ve come since you first started on your truck is amazing!!! Honestly just keep up the great work look forward to the next videos!!!

[@joeschlotthauer840]

Use an adjustable wrench to straighten your door edge...

[@Revrbz]

Ayee peep the Craig Morgan at 19:35

[@punkinsgarageandpaint8299]

Heat a Phillips head screw driver real hot then poke it into the carpet holes and the screws won't trap the carpet anymore

[@dreamingcode]

So glad we have the same truck. Any way to add a lock to the hood? I live in the city. Scared someone will randomly open it

[@alexriel6013]

Your videos are very in-depth and detailed

[@dnovello]

truck looks great!

[@vintagespeedandperformance6615]

Looking good and getting jealous. I am in desperate search of a bumpside short bed for my next project . Quick suggestion if youre gonna keep the black steelies...(they are perfect for this truck BTW) . Get some chrome lugnuts with the closed back. I have ran a lot of black steelies on cars over the years. The pop of chrome from lugnits is 🤘🤘

[@2koolchris291]

I agree with you. I don't like bondo but it was the thing that made my brother's truck look like new. So I tolerate it.

[@LKRS111]

Looking forward to the lowering of the truck.👍

[@independentcontractor1633]

Awesome!

[@donaldk.macbaird4950]

That is called a sill and what it is mounted on is the rocker panel

[@jonathanswindle7023]

You got to wear a respirator to avoid breathing in the sanding dust. Body filler will mess you up. Protect your lungs.

[@bannablitz247]

Hey craig, I know you use a lot of wimbledon white, you can get an 8 pack on amazon for about $6.30 a can. might be worth it to have a stock.

[@gfrank8058]

Nice job, nice and fresh. GF1 👍👍👍👍👍👍👍👍👍👍👍😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😎

[@ThePriestlyMan]

Looks great

[@richardstone3980]

Have you put a roof skin on the truck yet?

[@blueovalkid86]

Awesome man. Looks good, cant wait to see it lowered!

[@619films5]

Pro tip from a not so pro, you don’t need primer to spray color over color and to avoid hard lines fold the tape in half and buffer the edge. Other then that looks good and see you Saturday 🤘🏻🤘🏻

[@itsmcrae]

9:00 tape asmr

[@Michael-sb7ye]

Awesome now you just need to do the whole rest of the truck😎find a new roof skin ASAP it will spread like no tomorrow

[@MitchJohnson-uu5uf]

I like the rough outside and the nice inside theme your going with, probably what I would do.

[@Ford-en3lj]

The craig909 would doors from a 1967 F100 be a direct bolt onto my 1970 f100? I'd appreciate the help

[@brucedrake904]

Great job looks awesome

[@sethlincicum1342]

Heyyyy you got your bike back!😂 Another great video. I CANT WAIT FOR IT SLAMMED!

[@ashtynhawley479]

Galaxie paint clean up n clean motor video next...

[@quasidragon07]

what grit sand paper did you use?

[@Viktorrhansen]

Came out great bro really gonna be a "Show stopper" now haha

[@eanhartman9574]

Damn dude the truck is lookin sick!

[@properteaproperty]

About time you guys bought a compressor and a Harbor Frieght spray gun

[@yoboi01]

Hope the galaxy is coming

[@efrenalanis3400]

Yesssss!!!!! New vid I love them man keep it up and I love what you did with the tuck

[@jnastali]

Were you looking for Sill Plates?

[@red58fury]

dang I had no idea your cab was that bad rust and bondo wise.

[@vargaspueblo]

Great job! Looks Frickin Sweet!

[@ashtynhawley479]

Drop the oil pan open the heads n spra sea foam in it let dry then oil it bran new motor

[@NCPorkBBQ]

Really enjoy these videos, becoming addicted

[@kevinanderson705]

Why stop at the door jams~~?? Rattle can the whole rest of that truck!!!!

[@SouthernRaiIs1186]

Neat!

[@codyvanness7756]

What year is your truck

[@youngbuckrestoration3912]

Freaking holes, man. I got a bullet hole in the back corner of my GMC's cab and I want to fix it because I want to do a nice paint job, but at the same time I kinda want to leave it because it tells its own story

[@yeboscrebo4451]

Where you gonna find a roof skin for that year?

[@JMc.D]

Nice

[@ashtynhawley479]

Just make sure she dont rust out n youll be fine

[@carlosmunyo1344]

Subtitula los videos porfavor.. Saludos desde argentina !

[@SNDTEK1]

those are called door sill trim panels

[@fortitudegarage8956]

Forgot to say, I came across a company for you, That rebuilds original car & truck radios, So if you want to look into them for the Galaxie I will get you the info..

[@jamesbascombe8274]

Sill plates. 😀

[@Alkysix]

Did you give up on the '64?

[@lenkowalyshen9571]

That would be called a Step plate or door sill plate

[@bsmithshoes9120]

No other allergy medicine works for me but I recently started using nasacort and I can actually breathe for first time in 20 years maybe you should try

[@JorgeOrtiz-1980]

Love this video take care my friend

[@treylewis7036]

I hope you'll be doing a video on the Galaxie soon

[@piggyburrito8]

Love the video man keep up the hard work

[@the_luke_7272]

Love the video Craig keep up the great work

[@jamesbascombe8274]

Have to look and see if I still have a pair of vent window locks for u. The ones I took off my 68 are in better shape than yours are.

[@braydenreidsmx4756]

“Full Jeep”😂😂

[@mcdlt8414]

Hi Craig, lookin good bud, love the vids

[@corygentry2850]

What is going on with the power wagon

[@riogrande163]

Keep up the good content! 👌

[@TheWolverine-rm2kr]

What happened to the American flag headliner?

[@dirtmonkey5613]

0:14 “it’s really Gross now but it was kinda nice” ??

[@steventegeler7084]

Thecraig909. Sure like your videos. But wish did my videos on your galaxy. Sure would like to see more of that.

[@curtismcquiston3192]

Why did you not take the door panel off now it has over spray all over it

[@joeschlotthauer840]

*DOOR SILL PLATES* At 1:00...

[@user-qv4rj3fo9b]

What happened to the Galaxie project?

[@josephwatson8448]

20:20 like 8" ? like?

[@adamgrosskreutz7546]

don't use bondo, use a good quality body filler. bondo products absorb water, and pop and peel over time, it also shrinks as it dries

[@vintagespeedandperformance6615]

Epoxy primer helps seal body filler and prevent moisture absorption. At least it delays it

[@adamgrosskreutz7546]

@@vintagespeedandperformance6615 still bondo is a pain, and if your surface isnt prepped right it will bubble and peel

[@geraldlossing4947]

I need a roof skin also for my 72 f100, where do you get one?

[@the_fomoco_man5160]

Far as I know not reproduced yet, you'll have to find a decent one at a yard and cut it off.

[@richardculbertson8027]

Did I hear right that you cut your springs

[@s10patriot96]

This message is to your dad! Get him and his friends some safety equipment from Harbor Freight or some other place......the poisons will get in through skin, lungs, or eyes. Don't ever take short cuts.

[@alexriel6013]

Idk how you dont have over 250k subs

[@andrewcampbell1587]

why don't you get another f100 truck and put the other chasis under it

[@raneman7415]

Aw youre gonna lower it? I think it looks MEAN with the stance it currently has

[@thatguyinthe5.036]

I'm looking for a f100 do u know anyone selling one my dad has always wanted a f100 agian after he got rid of his a long time ago and I thought for his birthday I'd buy him one 👍🏻

[@joe_kaiser2136]

Do you know how much cheaper it would be to just buy a gallon of Wimbledon white for a spraygun? Facepalm

[@guillermonieri4203]

Keep it up. Your videos are of great help. Thank you.

[@zachfuquay4555]

A white windshield banner would look sick😻

[@odogg81malibu]

Sill plate, not rocker panel...

[@bradfordcustoms7588]

What is the music at 1:20

[@bradfordcustoms7588]

Nvm I found it. Dreams by joakim

[@lancebowers6591]

PATINA