My First CS2 Map

[@ashishsb9075]

Counting on you to complete this one. We all have fond memories of the game making one. 🎉

[@AtomicSpeedFT]

Hard to decide if either it or the Odgrub one is my favorite series.

[@C0dingschmuser]

I miss that one

[@oliverhalenius]

Yes, absolutely!

[@itdobelikedattho8112]

He's gonna abandon it

[@ashishsb9075]

@@AtomicSpeedFT you would favor the game development one if you at some point dreamed/planned to make a game.

[@TNAZEP]

Just a little tip for the future. In Source 2 we no longer construct our maps using blocks everywhere, since everything is a mesh now we instead just use faces. Basically the old idea of putting nodraw textures on all unused faces is no longer a thing, instead we only actually create the faces that will be visible. To make a quick starting room you can just make a block in the same size you want it to be and then invert it, done, room created.

[@Die-Coughman]

This is one of the best things about source 2

[@Foxfac3]

that's beautiful

[@dom7594]

yeah, eagle one development team has some great videos on the s2 hammer editor

[@PatalJunior]

I agree, this should go to the top so he can notice it, and go watch a video on how to do that. The workflow is so much better, expanding meshes, to make walls, corridors, inset them, make them rounded and so much more.

[@dirtkiller23]

S1: create 4 brushes with 36 faces,nodraw invisible ones S2: create a block,then press F to invert (just 6 faces)

[@frederikvilhelm202]

Thank you, Phillip! Thanks for all you do for the community!

[@raqtty]

I would do anything just to get your hammer tutorials for s2 hammer, they were what got me into mapping, no time wasted, exactly what you needed, you could binge watch the entire series of videos in such a short time and you got so much knowledge, thanks for making those!

[@patrlim]

You forgot to mention, if you don't compile with lighting your map is still lit, it's just not pre baked yet and runs slower

[@enki-enlil]

That's sick

[@steinkoloss7320]

Sounds like that would allow a day and night cycle ingame? The way I understand it, that you couldn't do sun movement in CS1 or 2 right now because all light is baked, right?

[@patrlim]

@@steinkoloss7320 you could have a dynamic day/night cycle, but it would be stupidly laggy.

[@NickJerrison]

@@enki-enlil That's lit.

[@cnr_0778]

@@NickJerrison amazing even

[@mahdiyarnofouzi5248]

Since they announced CS2, i began waiting for your "new hammer editor" tutorials, since i learned mapping with your videos. I hope ti see you make more and better maps in the future. Also if you are willing to meet a fan in cologne or needed help, I'd love to meet you

[@kytkinpommiracing]

😢

[@Gbergz]

3kliks. The guy that makes a 9 minute video feel like 1. Love it.

[@kdee1428]

Thats exactly what i was saying to myself right now!!

[@noahk]

no way :D

[@milos3d]

Man I use the watch your videos as a kid long ago when I made CS:Source maps. After my time in the military I decided to go full on and become an Environment artist for games. I landed a position at EA as my first job in the industry. Seeing all these source 2 editor features fundamentally make so much more sense to me now then it did a decade ago. I am just sitting here laughing as I recall not understanding a damn thing in your videos back when I was a kid. Now that I have used Unreal Engine and Frostbite engine for years now professionally , I hope source 2 comes naturally. I am planning on booting source 2 up and creating some environments soon. Its really nice seeing you still on KZbin making videos about this. You really did inspire me to start making maps and ultimately becoming an environment artist professionally! Cheers man

[@jovialjam]

Yaaaayy! My favorite content from this channel is easily your map-making journey! Glad to see you will be continuing it!

[@charleston_]

Good video really reminds me of how I haven't watched it yet.

[@kipchickensout]

such an insight on your life

[@charleston_]

@@kipchickensout to watch is to watch in time there is time and time cures all video wounds

[@spiderjerusalem8505]

So true!

[@lululombard]

It's great to see that Valve is focusing on quality of life improvements for Source 2 mappers!

[@HeisenbergFam]

6:07 "im having fun with mapping, said nobody in CSGO ever" as a non mapper, can confirm Philip's statement is 110% scientifically accurate

[@Malxer]

You only have fun with meth, Heisenberg!

[@WalnutOW]

I remember when I was young I downloaded Hammer and tried to make a simple map and that removed about 36 hours from my life until I gave up

[@BenLubar]

I've been doing a lot of mapping for Alien Swarm and I only ever feel relieved that Hammer didn't crash, no fun allowed.

[@niks660097]

@@BenLubar the crashes have pushed me to literally "hammer" my monitor one time..

[@BenLubar]

@@niks660097 I mostly "hammer" ctrl+s

[@mauromerconchini]

A Source 2 map-making series from Phil? Yes please!!!

[@KaraokeNig]

YES.

[@bolledyte2]

What you said at 3:15 made me realize, those intro/victory videos could probably be different depending on who won? Would be cool if it showed the bombsite being blown up if T-side managed to or not.

[@SimonEkström-q2s]

Your map making series inspired me to start making maps. Now I have 2757 hours in hammer editor and made one of the de_fenestration maps (df_pipline). I hope you can spread the joy of making maps to new people in the future. Thank you!

[@Elevatorisbest]

Man I’d love to port over my 2 WIP maps to CS2 already and finally resume working on them, if only I had access to Hammer 2 💀

[@nifiga_prikolno]

you can sorta pirate it, no one will judge you and you won't be pursued for it unless you try to join the servers

[@Nick-ij5nt]

exactly what I said lol

[@thebeamhero]

i know how you fell and am also in the same boat

[@mateyv]

same

[@ironpainting1210]

get keys for s&box since they changed the invite system, got source 2 after like 5 minutes waiting on their server for a key

[@thePeterandByron]

Short vids going over hammer 2 like the old hammer guide vids would be a godsend for new mappers.

[@FreelanceDev4life]

This is your best video in a long time. I got to know you as the "Map tutorial guy" way back when. I can't wait to see what you uncover, you Source Engine Detective Genius!

[@Enivoke]

I’m so excited you took this path Philip, I can’t wait to see more videos like this!

[@N0THANKY0U]

this video was strangely comfy

[@robbasgaming7044]

I just gotta say.. I found your channel through mapping tutorials like 15 years ago. Wow, 15 years. What a journey we have been on ❤️

[@pddd8558]

About 10 Years ago your creative and experimental source maps have gotten me into mapping. Back then you made a hammer tutorial on func_rotating's and showed the entity off with spinning pyramid shapes. I then used these exact pyramids in my first map and began my own journey. It never was of high quality but brought me and my friends plenty of fun. Can't wait to see where this new part of the journey leads 3kliks!

[@WiiFitGOTY]

I first started watching you with your CSGO hammer tutorials. Not only were they informative and concise but also sprinkled with your lovable humor. Its been a joy, man.

[@Xeculus]

You got me into mapping, and I've released multiple competitive and workshop maps with the help of our community. Please, please, please make more videos talking about the new editor! I no longer have time to create maps, but maybe someone else will be inspired and have fun like I did years ago. Much love!

[@alpacar6934]

Thank you so much for your source mapping tutorials. Seeing the exploding tree gag really brightened my mood and made me nostalgic

[@b4kk3rYT]

Actually so glad to see you make a map. Cant wait for War Owls CS2 map too

[@blank6184]

Yesss more map making content! The updated source 2 tools look great, I was afraid they would be very complex and hard to get into for new mappers, but they look even simpler than source 1 for creating basic maps!

[@Schaddn]

Looking forward to the mapmaking series. I've recently taken a liking to mapping, so this will be perfect!

[@Yo3Pro]

I will never forget my first csgo map that I made thanks to you! your sdk tutorials gave me confidence to try, and after finishing a rough scratch of the map I played with my friends and had a lot of fun! I really appreciate your csgo videos and have been a watcher for over 10 years now! I hope you continue on delivering great content!

[@ItzFluffe]

First stumbling upon this channel when Phillip was still making Hammer tutorials back in the day and subbing, and seeing this video drop on my birthday all these years later is the best gift I could of ever hoped for, thank you Phillip.

[@hawkbird6294]

5:26 oh, i have something to add! very long time listener, first time caller hah! i love your work. from experience with building with unity, the "real time ray tracing" in the editor there is not something thats intended as a gameplay thing, not to say that it couldnt hypothetically be, but thats not gameplay ray/path tracing, thats a live preview of what the light baking/compiling function does! just with a lot less bounces, usually theres a max sample count which is why it looks less grainy over time, and it resets the samples every time you move the camera. blender has done the same thing for years using the cycles render mode, unity supports it too through an addon called "Bakery" with the realtime addon. its more similar to how the Portal RTX release functions, its doing all the lighting with path tracing live, but that has lots of smoothing so it doesnt look like the raw static the engine is actually seeing. the editor in source 2 however is far more intensive and "complete", its representative of what the map will look like after its baked, but thanks to modern graphics cards, waiting for things to be baked to see how lighting looks can be a thing of the past! well.. assuming you shell out for a 4090 like SOMEONE i know ehehe. anyways, never stop being who you are! i never get as excited about a video anymore on this platform as i do with yours! hell, i hardly even play csgo anymore, i just love game engine stuff.

[@slapdash1438]

I love how in the intro, Phillip used footage of the school map that was made by a student who got expelled and had to transfer because the school board found out their school was in a game about terrorists

[@Goji4ever]

Yes! Please do share your cs2 mapping journey, a few years back I learned the basics of csgo mapping off your guides and would love more mapping content!

[@Jxlp]

This is insane I am making popcorn for this.

[@Daburubareru]

Oh man this bring me back the memories, of your s1 tutorial videos! That's how, we all got into mapping! I am so fucking hyped, for the future of Source 2!

[@DenniTheDude]

I would looove to see mapping stuff from you :) I think I will try to learn it as well, and the way you make tutorials has always been my favorite so I'm excited if that ends up happening! I personally hope that at some point Valve makes left 4 dead 3, because I'd love to map for that as well

[@ploxl1441]

your decade old videos about hammer have helped me as late as 2022 making surf maps. i hope you will continue videos for hammer2 editor ♥

[@aeronautisch]

it gives me a lot of joy hearing you being enthusiastic about cs2 mapping. i hope this will become a serie

[@XanderNiles]

The maps Philip made for Counter-Strike have always been incredible. Definitely looking forward for what he would come up with.

[@metallitai]

been watching the issues we face as a community on loot boxs. Do keep up the good work on creating content about the game and helping everyone enjoy the game as a game. Thank you Philip!

[@bshap495]

7:42 I'd imagine it's because they would cover the same general area anyways. From what I've read, Source 1 would automatically generate ambient cubes, which function just like the 'light balls', where they sample lighting and apply it to dynamic entities. Like with cubemaps, these entities would be lit from the nearest cube. I'd imagine this could lead to unnatural results, like an NPC receiving light/reflections from an adjacent room, even if there's a wall in-between. Having a combined cubemap/light probe with a bounding box solves both issues with a single entity.

[@simonkvien7766]

I used to watch your very first mapping videos in CS:S, how to make an elevator etc. It's been a hell of a journey, thanks for the memories!

[@olaftw9135]

Greati video! i really feel strongly about sticking with cs mapmaking for newer mapmakers that just got around csgos hammer! ive heard numerous comments about stopping mapping for having to learn a new editor and tools is too much work! i really feel this is a learning opportunity for everyone since the technical side has jumped, what 20 years forward. again, great video!

[@Digit404]

Watching this video hit me with nostalgia as I remember when I first came to your channel so many years ago for your mapping tutorials.

[@KEROVSKI_]

This is what I was waiting for. New co op maps, this time made even better. I just know that people will make crazy missions and fun stuff. Great new content for me and other youtubers.

[@Mishamallow]

Thanks for teaching me how to map for the Source engine with your hammer tutorials. I can't wait for more Source 2 mapping videos

[@bluhryAF]

I came from a very entry level mapping experience in source 1 to a new engine and have been grinding to figure out how stuff works. I managed to make a playable defuse map even tho it's even below BadMap1 qualitywise. I must say it's not an easy thing to get into but finding out how stuff works is so rewarding. I made 4 iterations of the same portion of a CT spawn just because I would get stuck and realize that to fix what I had done wrong I had to delete the whole thing so basically, I'm compiling a log of ways in which I screwed up. Looking forward to a mapping journey from you so I can piggyback off of your knowledge (much like I did for cs:go) as you discover and improve aswell. Thank you for the good work.

[@ygaming]

I subscribed to you years ago for all the CS:GO SDK videos, nostalgia hit hard

[@h38-m9e]

Wow. Just Wow. I loved mapping in source 1 and made countless crappy prototypes that I loved. But, the main reason why I stopped was because it was just so damn time consuming and every time I did one little mistake it would cause the map to not compile, and so many headaches. I especially loved making surf maps, but my god were those triangles a pain in the ass. Seeing what source 2 is now capable of and the ease little prototypes like this can be made, I am inspired to jump back into mapping again. Thanks!

[@bjiru_]

You seem so passionate in this video, having a lot of fun despite what you say, looking forward to more :3

[@Ronin777z]

Thank you A.I Phillip, very cool!

[@VerboseToast]

Very, very much looking forward to CS2 mapmaking content. I'd especially love tutorials, but even just overview content like this is extremely interesting and entertaining.

[@friendofp.24]

Super excited to see a map making series for CS2. Doesn't have to be anything serious like Sparity. Just enough to discuss your thoughts on mapping, playtesting, working, and learning in Source 2.

[@Crossfirev]

Thanks for going to colonge. Can't wait to see what Valve will inevitably release while you're gone!

[@MoXiang_Sumika]

Looking forward to the return of the map-making series! It's one of my favourite series!

[@zusaij]

This video makes me appreciate Halo Infinites forge mode so much more than I already do.

[@sirclark4405]

Never really got huge in to Halo but the mapping tools seem otherworldly

[@BenLubar]

I just started writing a long-form tutorial for Source 1 mapping and the first three pages are "here's how to install Hammer", "here's how to look at Hammer button tooltips", and "here's how to make the world's shittiest box with a random texture and exactly one player spawn entity and compile it". The pages after that will explain how to make it not technically shitty and then how to make it not design-y shitty, but the point of the first three pages rushing the reader through as fast as possible is to stop people from being able to say "I can't make a map". Because you literally did just make a map.

[@psychocoffeee]

your videos make my day and i always look forward to your uploads!

[@ruzgar1372]

That bit about getting used to the new tools being scary is so real. Nowadays using Hammer is like the back of my hand, knowing all of the useful keybinds. Atleast I map for TF2 so I won't be changing map editors anytime soon.

[@artemkatelnytskyi]

Mate, you are very creative, persistent and patient. I admire all your work. I wish you to master new tools and have a lot of fun with Source 2.

[@cheesypoohalo]

'And since I'm heading off to Cologne' CS2 release confirmed, thanks Phil

[@notalostnumber8660]

I really want to watch a series where you deal with map making again I fell in love with your old videos, which is why I still watch your newer ones, even if I stopped playing CS:GO entirely

[@the-deagledude]

Great to see you fiddeling around in the new Hammer with such fresh enthusiasm :) While i have not managed to finish and deploy my map i'm working on since Source times (was ported to csgo, i know it seems crazy but i also have a life, hahahaha) ... I've got more than 1200 hours in Hammer and 75% of what i know or learned was from you back in the days!!! Always loved your videos/content

[@elliehugg]

would love to see another map making series!! :3

[@optimise.]

Very glad to see another map making series from you

[@syralixes]

i know this man from the sandcord

[@optimise.]

@@syralixes 👀

[@syralixes]

@@optimise. is it even still alive

[@optimise.]

@@syralixes Sorta, it’s more active than I would’ve thought it would be at this point lol

[@micholous]

Lol I remember asking like... 2 years ago if you would do the mapping series for this game. You did say you will but need to learn it yourself.. and I can see why. Guess I got my answer! Super excited !

[@untrust2033]

I really hope we get a nice playlist of short and concise mapping tutorials, just like the hammer ones but for source 2. Those tutorials are invaluable!

[@thatcipher]

Finally Source2 mapping content! Waited for this. Please continue this adventure and share it with us. I could listen to your videos for hours and since Source2 reignited my love for mapping again I'm content hungry. I'd love to see how you figure things out bit by bit. For example how you currently use boxes like a brush but surely will soon realize that this is not the way in Source2 (Especially now with Backface light blocking! VALVe please bring this to HL:A). But I'm still sooo sad that I wont be able to make any (usable) Maps since there is no option for CPU rendering. I dont have an RTX Card and cant afford one currently. I'm sad that VALVe took this route eventhough I felt like they always try to include a huge community... but apparently not this time. I hope the community will bring a custom build tool for lighting where you can choose what to use. I'd rather wait 4 full days until my map is fully rendered than not beeing able to render the map at all...

[@imvirpil]

There's just something absolutely special about mapmaking, regardless of what game it is. Watching this video really takes me back to the days where I'd spend endless hours watching tutorials about Hammer, trying to figure out how to do anything.

[@JuicyMixFilms]

Can't wait to see your source 2 map making series!

[@johnwarthunder1990]

0:05 this is literally the castle from a recurring nightmare I've had since I was a child. Are you spying on my dreams?

[@mentox6592]

I’m looking forward to this series. Also can I just say how I appreciate your talking speed, no need for 1.25x at all.

[@KryzysX]

Good luck, solider! You came a long way!

[@tmtmtg]

I can already tell this is gonna be one of the best series on the channel

[@mr.jogurt]

map making series

[@giannishutup]

Thank you for this, Phil. This is completely besides the point of the video, but I've been struggling to become a Producer for a couple of months now, and this vid has kind of shown me that it's alright to be in the process of not being as good or efficient at using a piece of software (in my case Ableton) when starting out and to not hold myself to high standards and to just do something, anything. I think my main takeaway form this video is that to be good at something, you need to be bad at it first.

[@Trovosity]

Mapping tutorials from philip in the cs2 days, good times we are in.

[@shane106]

It's exciting to relearn how to map, the effort will be worth it

[@okay-ec4vz]

Good video really remind me of how Charleston hasn't watched it yet

[@NthrUnnecessary]

"I'm heading off to cologne in a few hours" LMAO that was pretty funny. Have fun in cologne Phillip :)

[@mrunderscorecool]

Excellent video, Philip. VERY bursty!

[@phonee_]

0:58 Holy Shiiiit thats my highschool! I remember when that made the news

[@vodka_0000]

please do a source 2 map making series!! that would be incredible love the vids been looking forward to new mapping content

[@zertbrown4642]

the map building process and learning how to map build again is quite interesting

[@Cunaverse]

I love all your content but map making content always hit a special spot and learning more about it by you always exciting

[@retiredaccount0]

The "have fun" at the end was so nostalgic

[@helloitsgabe257]

got into your content through your mapping videos, would be fascinated to see you do another series.

[@DiegoClaudioSergio]

I felt exacly like you with my first animation and compile for CS:S 😊😅

[@jeka_stolenko]

That first map does not deserve to be called BadMap1. It perfectly worked as expected. It's done its work just finely - to demonstrate new no-seal approach. You should've commended it Good job, NotBadMap1

[@S1nkcat]

Thanks for going away again just for Valve to release more in cs2!!

[@CatsT.M]

WAIT WHAT! You can have a void that does not give people seizures! This is actually amazing! I really hope Source² does not kill Source mapping, like how Source did not kill GoldScr. Though, GoldScr and Source are so different that it could not. Hopefully the janky physics and G-Mod keep people using Source...also the fact that there are way more games for it which I did not consider. I tried a bit of Source mapping recently nad the two things I have to say are: even following your tutorial, why are doors so annoying to make? Like, you would think you could just plop a door model down instead of having to literally make a door...perhaps there is a way and since I just did it for a couple days I could not find it. Also, something to annoying professsionals, I made stairs by just copying and pasting a 16 (I think? Is that the Source Stair Height?) tall blocks ontop of one another to get working stairs... 7:36 That is probably what everyone said about Source when it first came out...minus the 2. Woah, in-editor physics! Well, since you are going to Cologne the game _Will_ be released. Thanks, Philip! It is so nice for Valve to release updates when you are going on vacation so we know when they will happen.

[@GoldSrc_]

Wow, this is indeed amazing for mappers. I remember using Hammer a few times and it was pain lol.

[@NoSleepCSGO]

Wow that lighting is massive. One of the reasons I gave up on mapping was because I just wanted to check my lighting but my map had become so complicated that itd take hours to render just to check out 1 room

[@BlazertronGames]

Great to see you're getting back into map making!

[@iliyalb]

Can't wait for the Source 2 map making series!

[@reversemyopia]

Beautiful video!! Reminds me of my mapping adventures 5 years ago

[@westnekon2106]

Now WarWol can finally continue making de_amigo

[@projectdvan4568]

I was waiting for this video. cant wait to play

[@Jalmaan]

Imagine making a CS:2 map in C:S2

[@RifterPortal]

For those starting Source 2, lemme give my advice (I've used hammer in HL:A and s&box) VIS will compile better if you have a map sealed otherwise you'll have it calculating way further extending compile times and it being a nightmare Don't use block building techniques in Source 2 hammer, use mesh techniques and good mesh practice to build your maps (similar to modelling software) For those wondering with "env_combined_light_probe_volume", its used in areas with reflective materials involved and to do lightmap samples for baking To put that quickly in my opinion: If an area is entirely reflective mats, use the combined light probe if an area has some reflective mats but rest aren't, you can separate it into cubemap boxes and light probe volumes otherwise, just use a light probe volume All in all, its best you look at tutorials with Source 2's hammer which I'll recommend watching Eagle One Development Team's playlist on (it covers HL:A and CS2)

[@randomcatdude]

players' weapons and models can have reflections too so you should nearly ALWAYS be using cubemaps/combined probe volume in the playable space