My First Mini ITX PC Build (NZXT H210, Rog Strix, Ryzen & Water Cooled)

[@vadimfr]

That was definitely your best video YET! Very impressed and happy to see your edits getting better and better. This was my favorite Mini itx NZXT build ive ever seen tbh! Keep up the great work!

[@BuildsWithV]

LL Cool Hwip thank you so much! Really appreciate that

[@wanessasilva4541]

I just can't decide what I like the most, the build or the ASMR! LOL Nice build, btw. ;)

[@BuildsWithV]

Thank you so much 😊

[@MessiahKnight]

Just got this case in the mail I’m so hyped!!

[@BuildsWithV]

Awesome! 👏 It’s a stunning case! I loved the look of it when I finished this build. Thanks for watching 🙏

[@snooplong747]

that "YESS!" when he turned on his pc

[@oKokimaru]

Damnnnnnnn.......this thing looks so nice.....I am personally planning to build my first PC in this with a budget of $600 (GTX 1660 Super, i3 10110f), and this video gets me even more excited to finally be able to build my PC!!!!!

[@BuildsWithV]

Thank you 🙏 that’s going to be an awesome first build for a solid price. Good luck to you and thanks for watching 🙌

[@oKokimaru]

@@BuildsWithV Thanks, I might update you if I feel like it once the PC is built.

[@SaadKhanAhmed]

Amazing! I have NO idea how to assemble a pc but I am really looking forward to build one on my own. I will definitely follow your video because I loved the case, water AIO, and everything. Thanks again!

[@SourceHD]

Yeah looks really good. Really damn good. However though fam. I would've rotated the CPU Pump 180 Degrees, so that the tubes are coming out on the right side of the moderboard towards the Radiator. So that the tubing doesnt have to look soo "Stretched". Otherwise really nice work :D

[@raphaelb5172]

I like that we are hearing every single note XD. Even if we were doing the build, we couldn't feel that close :D Nice one, I did enjoy it even with the sarcasm 😉

[@BrrtWarthog]

Great build, I love ITX builds! I agree with what others have said, the video production value you have going on is very good for someone with your sub numbers, well above what you usually see. Your editing is on point. One thing I will say, to help you get it even better, is don't have your lighting source directly behind the camera POV. Move it off to one side a couple feet and angle it to your point of interest. See examples at 2:30 where the light is glaring off the CPU, you can only see the text on the CPU for a split second; same thing with the RAM packaging at 3:30. And then at 7:30, you're getting a giant circle of glare on your work surface. All of these are due to your light source being more or less behind the camera POV, which makes any light reflecting off of surfaces go directly straight back into your camera. Offsetting the light source at a bit of an angle to your subject matter will help reduce that (or even eliminate it entirely in the best case scenario). I would also look into some sort of diffusor so the light isn't so harsh/high contrast. Hope this helps, keep up the good work! :)

[@BuildsWithV]

CompleteFailure Thank you so much for the compliments and the great advice! 🙏

[@paulogarcia1119]

Yeah, the lack of background music is much better. Also great build!

[@marianistefanoj]

h210 is always so nice too watch a build, congrats, looking awesome, planning have on with cm ml 240 too, thanks for the video :D, greetings from Brazil

[@juanjognz]

Amazing videos! I'm impressed, because the quality of your videos is comparable with great hardware channels with more subscribers.

[@BuildsWithV]

Thank you so much! I really appreciate that so much 🙏

[@migchielfaber49]

Got this case coming in monday i hope it wil be my “greatest”build sofare

[@yobiker6871]

bad airflow for this case

[@poggyboy2042]

oh my... this is the best pc ive ever seen

[@BuildsWithV]

It was definitely pretty cool. I enjoyed building it 🔥 Thanks for watching

[@poggyboy2042]

@@BuildsWithV by the way where did you get those black and white cables?

[@BuildsWithV]

@@poggyboy2042 I got them from MicroCenter. I’m sure they sell some on amazon too tho

[@arunmariappankarunanithi]

Nice build. Almost same configuration and size factor I am looking for. Thank you 🙏

[@BuildsWithV]

Arun Mariappan Karunanithi no problem at all 🙏 Thanks for watching

[@Oat_meal_YT]

Ok this is satisfying

[@jacobm445]

Love this case

[@BuildsWithV]

Yeah this case was awesome. Thanks for watching

[@UltraGameWorld]

Great video really enjoyed the video and good production levels too

[@BuildsWithV]

Thank you so munch 🙏

[@samiheinelo1703]

Just finished my H210 build with R5 5600x and 6800XT. Unfortunately i had to take off the psu shroud because thick gpu. It fits allright but there is so small gap between shroud and gpu that i was getting gpu temps as high as 90c. Sfx psu would maybe be better choice than my atx psu but now undervolted and shroud removed it barely reaches 70c so it was really worth it. And still looking nice.

[@painkiller895]

Nice build !

[@BuildsWithV]

Thank you 🙏

[@GoukiTehPwner]

nice loving the content

[@sanitoeter4743]

nice build, man! keep it up

[@BuildsWithV]

Thank you so much 🙏

[@XXNIGHTMAREXX-ho1cr]

hay yo thats a nice ADIDAS pc theme you got there man

[@laughy5323]

Where are the cable extensions from? Can you put the link in description?

[@BuildsWithV]

These are from micro center. I couldn’t find any on amazon that are as nice for the price. Asiahorse cables are similar but quite a bit more expensive. These were $20-$25 at micro center.

[@wonjune12]

@@BuildsWithV i think its inland PSU sleeves cable. They're now $29.99 www.microcenter.com/product/610071/inland-psu-sleeved-cable-extension-kit---black--white

[@Αβζ-υ7χ]

7:15 ngl i thought that stuff on the left was something on my screen lmao

[@Farmhand2k]

Nice build, like the different approach.

[@BuildsWithV]

Farmhand2k I appreciate that, thank you for watching 🙏

[@terrificstrand83]

New to pc builds. How's the Cooler Master ml240L working out so far? Looking to get one for a similar build.

[@BuildsWithV]

It’s a very solid AIO. I absolutely love it and have used it in many builds so far with no issues at all.

[@nicolasherrera5058]

Nice build

[@danielmiguelez4283]

you did not remove the PCIE NVME SSD's sticker so the chips can make contact with the thermal pad?

[@Driftuner]

How are the thermals of the gpu? It looks like its chocking in there. The only air coming into the case is already hot because of the radiator, and the two fans at the back and top are just exhausting hot air. So the gpu isnt getting any fresh air from anywhere. Because the psu is at the bottom im guessing the air coming from there isnt particularly cool either...

[@n0tcrispy667]

Nice Video, but you should've added music during your pc build and maybe some voice over which would make your video more interesting. 👍

[@BuildsWithV]

Thanks for the tip! 💯

[@innogz6200]

I have the same Case (white/black) non-i variant and deciding to put LED strips on if LED Fans aren't enough for lightings.

[@BuildsWithV]

I think the fans are plenty light, but it never hurts to have more RGBs 👀

[@fabis-welt8864]

Nice one ! I did the Same setup but completely without RGB :) just the mainboard light

[@BuildsWithV]

Nice! It’s a solid setup. Looks amazing too 🔥 Thanks for watching

[@akremakrem6692]

good bro for pc

[@solefreak2]

How’s this case for temps? Looking for a mini itx case for my new 3060 ti fe card

[@leomedel5787]

Nice build men, i have a doubt the water pump tubes did not fit from the other side?

[@ashkansaberi2010]

how was the thermal mate. since im traveling im considering the case and wanna switch from a mid tower but getting small ITX would be costly to change power supply, motherboard and mostly not really good with positioning 240 aio. i got an MSI Ventus 3x RTX 3070ti which is a big card my concern is the thermal and gpu clearance. btw your build look awesome. congrats on your new beautiful pc man.

[@100radsbar]

Very nice build. How is the heat in regards to the graphic card, are you able to get enough airflow to cool the GPU?

[@cheesian123]

May i knw the black white cable brand? look cool and tidy

[@BuildsWithV]

I don’t remember the brand unfortunately, i just know I got them from micro center

[@Camacho182]

Does it come with those rgb fans?

[@mjojrjr6231]

How was the GPU and CPU temp at maximum load? Can it cope without thermal throttling?

[@nino3151]

Hey man, what are the white psu cables you got? Cant find for itx

[@keatonlam9238]

Could you have flipped the aio so that the tubes could be less tight???

[@ivanwill]

That is actually a nice looking build! Nicely done. Curious, with an AIO, on average, how long is the 'liquid' good for?

[@BuildsWithV]

Thank you so much 🙏 The liquid will be good for the life of the cooler itself. It won’t go bad or anything like that. The pump will eventually go out or something might break etc. Realistically speaking I’d say 5 years for an aio cooler give or take. I’ve seen some last much longer tho. 8+ years.

[@kolosersoh9153]

Ivan Williams, I heard for the average it could be 5-8 years.

[@unknownuser4691]

Yo, you prollt won't see this but is the notes 0 case fan rgb good or is there a lot of dim spots, im thinking of getting it for a o11 dynamic, do u think it will be bright?

[@BuildsWithV]

They’re solid, I replied to your other comment as well answering more.

[@OliverTrinidad]

Looking at building a very similar build in the next couple weeks and this video helped immensely as this will be my first build! One question, what are the noise levels like? I love the RGB fan/liquid cooler look but is it too loud?

[@OliverTrinidad]

Also where did you get those nice braided cables?

[@BuildsWithV]

Awesome! I’m glad i was able to help 🙌 So the noise levels were actually really good. Not very loud unless the GPU ramped up high. But even then it wasn’t too bad. Can probably make it even quieter with some fan curve tweaking if needed. I got the braided cables from micro center. Thank you for watching 🙏

[@tssyasha]

I really wanted to change my atx case to itx, but in your opinion, how is the air flow? Esp during heavy duty like 3D rendering or gaming?

[@steinernder1684]

How about the thermals while gaming? Is there airflow enough for the graphics?

[@BuildsWithV]

It does get pretty warm, not nearly as much airflow as a bigger case. I didn't do any real testing but I do know it got very warm. No issues tho which is great

[@Bobbydoesarchery]

I noticed that you didn't put the front air filter back on. Is it recommended not to? Or is it ok to add it back on?

[@BuildsWithV]

I recommend having it installed if you can. Unfortunately I couldn’t put it back on. I think it was due to the radiator but I’m not too sure why. Either that or I just forgot 😅

[@DDRB32]

How much clearance do you have for a GPU after installing a radiator with fans in the front? Will a 3080 fit in there?

[@BuildsWithV]

There was about an inch of clearance between the radiator/fans and the GPU. Length wise it might fit but thickness wise it wont unless its exactly 2 slots thick.

[@RajeevNandiMusic]

I have a question ...why did you go for a higher wattage psu ?? Will 550 watts not be enough ? I am trying to build a ryzen 5 5600 and can't decide what psu would be best suited for it

[@BuildsWithV]

550 might be enough but this GPU requires plenty of wattage and anything under 650 I wouldn’t trust.

[@Netizen56]

WOW! Great video! Thank you so much. I'm looking to do a similar build. By the way, what is that part on 9:36 ?

[@BuildsWithV]

Its a 10-fan fan hub. Thank you so much 🙏

[@Netizen56]

@@BuildsWithV thank you . I am a beginner and have no idea what this does but I will look into it!

[@BuildsWithV]

@@Netizen56 it allows you to plug in up to 10 fans into a single port.

[@billlagudas]

Nice build man can’t wait to get mine together next week. One question that little board at 9:40, is that where you’re connecting all the rgb to? Where can I get that?

[@BuildsWithV]

That is the fan hub. They also have a RGB hub as well if you need one. Bitspower ARGB hub or Bitspower 10-fan fan hub. Both can be found on amazon. They’re pretty good. Thanks for watching 🙏

[@billlagudas]

@@BuildsWithV So I basically have the same setup as you. (case, aio, gpu and motherboard) and I noticed you didn't plug in anything on the "cpu fan" 4 pin on the motherboard. Do you get a message to pop up when you boot your pc? because whenever I boot up my pc it takes me directly to the American Megatrends screen where I set the bios. It detects that my cpu fan speed error detected. "Ensure that the cpu fan is properly installed on the cpu_fan header or adjust/disable the fan speed low limit option in the uefi bios". You connected 2 of the cables in the aio pump into the "aio pump" header and the other to the rgb header right? leaving out CPU_header empty?

[@BuildsWithV]

@@billlagudas i actually plugged the AIO pump into the cpu header. I do that and then set the speed for cpu header in bios to 100%. I do it this way to avoid any issues.

[@ranveerpatel317]

pcpartpicker says the sapphire pulse 5600 xt and nzxt h210 are not compatible. This doesn't seem true from your video, were you able to easily fit the two together?

[@BuildsWithV]

It fit just fine but it’s quite tight especially around that white bar thing (idk what it’s called).

[@MavZc]

Hope to get some help, would a 120mm aio fit on the back as exhaust? I really want to upgrade from a stock ryzen cooler and I don't want to use a 240mm aio

[@BuildsWithV]

Yes it should fit either in the rear or the top.

[@djsotosmc]

Do you utilize the from usb-c port of the case? If yes, can you please explain how? Thank you.

[@BuildsWithV]

Unfortunately I did not and to be quite honest I’ve never messed with plugging USB C in. I’ve never had a motherboard that had the proper ports to connect it which is odd since many cases now come with USB-c

[@Hayden-oj7lv]

@@BuildsWithV But this mobo has a Gen2 USB-C header. Did you just choose not to use it?

[@BuildsWithV]

@@Hayden-oj7lv it’s not the same as the one used by the case. Unless I’m not seeing it properly 😅

[@samjbmason]

Just bought this case with a really similar setup of components. Would you say the extension cables are a neccessity?

[@BuildsWithV]

They’re not necessary but because this case is so small it’s really easy to spot the stock cables and kinda ruined the look. Thanks for watching 🙏

[@Gearsandco]

The aio is installed the wrong way I wasn’t able to cool my cpu well until i did this. The fans should be facing out and the radiator should be inside and the cooling should be intake not exhaust.

[@faith4426]

9:37 from which box is that part from?

[@BuildsWithV]

That came with my Bitspower touchaqua notos o fans from micro center. You can get just the hub itself on eBay or Amazon. There’s also better ones than this. I just used it since I already have it.

[@faith4426]

if u bought other fan brands is this part also going to be included or is it specifically only included in the type u mention?

[@BuildsWithV]

@@faith4426 some fan brands include them and some don’t. They usually will specify what’s included in the box. If it says fan hub then you probably do get one. These usually only come with fans that have like a 5 pack or so.

[@faith4426]

tx a lot!

[@stealthisname]

Beautiful build and you made it look easy!!! Curious, what temp does your GPU reach when under load? I ask because I have the same case, just bought an RTX 3070, and it gets very hot when gaming (86 C). I assume this is because of the lack of clearance/airflow between the GPU and the "PSU cover". I'm really hoping I won't need to get another case because they are eye candy!

[@BuildsWithV]

Yeah it’s definitely because of the little amount of clearance. Unfortunately not too much you can do besides maybe under volting and maybe up the fan curve. These cases are definitely stunning! I love it but that small form factor definitely comes at some costs.

[@stealthisname]

@@BuildsWithV And that's exactly the route I took--undervolting! I would definitely give it a go if you feel the card is reaching dangerous temperatures! Not only was I able to lower the temps significantly (65-70 C under load), it also runs faster/performs better than stock!

[@BuildsWithV]

@@stealthisname that’s awesome news! Glad to hear it worked great 👍 and thank you for watching 🙏

[@rottentrails]

how are the thermals on the ML240L V2? ive seen you use them in a few builds now.

[@BuildsWithV]

Rotten Trails very good so far. On the 3600 and 3600x (haven’t tested 3700x) its usually in the 60°-65°C range at 100% load. That’s with the fans set to silent. During games and stuff it stays pretty low in the 40s and 50s just depends. Really love this cooler. Nothing but great experiences with it.

[@rottentrails]

@@BuildsWithV i ordered one for my 3600X getting around 45-50 at idle and 75-80 at 100% load with the stock wraith cooler, so this will be a nice upgrade, thanks.

[@BuildsWithV]

No problem at all, definitely will help a bunch! Plus will be much more quiet than the stock cooler. Thank you for watching 🙏 Those idle temps kill me. I spent hours searching how to lower the temps and came across a reddit post about exactly my issue. I actually have a video that I made using the reddit thread showing how to lower the idle temps on ryzen 3000 cpus. Worked like a charm on my 3700x build. Seen a bit decrease on the 3600. Should help yours a bit as well if you wanna try it. kzbin.info/www/bejne/h3KbZZutprGIjdU

[@rottentrails]

@@BuildsWithV ill check it out thanks!

[@muhammadhaziq1264]

do all the case ports work and how do you pump water into this water cooler

[@BuildsWithV]

The USB C port did not work because the motherboard didn't have a USB C header unfortunately. The water cooler is a pre-filled system which is also a sealed system so you'd never have to replace to water or anything like that. Thank you for watching 🙏

[@DiazTech]

@@BuildsWithV Do you know a motherboard that can be used instead that allows the USB C to work on the front case? Good video, so did it POST on the first try? No BIOS update needed?

[@BuildsWithV]

@@DiazTech yeah I believe the x570 motherboard has a usb c header on the motherboard. It did post right away, no bios update needed.

[@racer736]

These are almost the exact same components I have in my cart online right now haha. It looks amazing. I selected the i5 for my processor. Do you have any reason for your preference besides perhaps the cost?

[@BuildsWithV]

Nice! It’s a solid setup and enjoyed it while I had it. I just go with Ryzen because of the price. If Intel was lower overall with motherboard included I’d probably go Intel. Performance wise they’re both really good and can’t go wrong either way. However, Intel in a small case like this is definitely a better choice since they run much cooler usually. Temps in this case were kinda high for the GPU, cpu was decent since I had the aio but still. It wasn’t anything to worry about but still higher than I’m used to in my normal sized cases 😅 Thanks for watching 🙏

[@racer736]

@@BuildsWithV okay thank you for the response! 👍🏼

[@Prototypezxz]

Are you not using the font panel audio?

[@BuildsWithV]

Williandy L unfortunately I had to unplug it because my original idea was to have it run behind the GPU but that didn’t work out 😞 but that’s okay, once I tape or do something about those ugly wires I’ll be running it somehow from the top down or someway better if I can. Weird location for that header imo. Guess had to be done since this MB is so tiny.

[@croneous]

What the final build end up costing you?

[@dextergabrielbibat]

Would a psu from mid atx fit in the mini itx case?

[@BuildsWithV]

Yes it will

[@MannyRiberaOriginal]

Ive had this case for 2 years and used it with my ryzen 2600 + stock cooler. Its got to the point where I’m feeling to get a new cpu cooler. Any recommendatiıons? 95c cpu temperature is starting to piss me off.

[@BuildsWithV]

I’d recommend going with the AIO I used. It’s the cooler master ML240L V2. Solid cooler and great price. Or you can go with the Lian Li Galahad 240. Also a great cooler. Both will take your temps much lower and they’re both very reliable. Thanks for watching

[@MannyRiberaOriginal]

@@BuildsWithV ımsaw the kraken x63. Meme machine.

[@BuildsWithV]

@@MannyRiberaOriginal the nzxt AIO is solid as well. Very good option. Will look amazing in this case.

[@MannyRiberaOriginal]

@@BuildsWithV what happened to the dust filter?

[@BuildsWithV]

@@MannyRiberaOriginal I forgot to put it on but if I remember correctly I couldn’t fit it back on. But I don’t remember exactly if I got it back in or not.

[@KarlGumbo]

I've just build my first pc with a ryzen 3600 and rtx 2060 in the same nzxt h210 case, but whenever I start a game, the temps get extremely high and the fans as well. What can I do to lower this? I even replaced the stock cpu cooler with be quiet dark rock pro 4, and nzxt h210 fans with silent wings 2.

[@BuildsWithV]

You can try undervolting to get temps lower. This case is small and doesn’t have the greatest airflow.

[@KarlGumbo]

Would it help if I switched the case with a phanteks p400a ?

[@lu.kbrunet4740]

Hey, i'm planning to build a similar pc, il love this case so much, il like small form factor but do you have issues with the temperatures of your GPU ?

[@BuildsWithV]

I didn't have any issues with the temps. As long as you have plenty of intake and exhaust fans you should be perfectly fine.

[@kenh86]

I would get the NZXT x53 for the AIO, it looks way cooler. Nice build though

[@BuildsWithV]

SPCE420 Thank you, I appreciate that. It does looks really nice and would look great with this case! It is 2x the cost of this one but regardless it could be worth it if you’re going for a theme. Thank you for watching 🙏

[@MrWalkwaySc2]

Why not wait a bit for the 3060 ti to drop? It should be around the same price point.

[@BuildsWithV]

MrWalkwaySc2 This PC isn’t for me personally. I built this for a customer and that’s what they wanted. However I had to return this GPU and got a different one for this build due to some issues. But yeah it could be worth waiting for the performance improvement unless that launch will also be crap 😅 hopefully Nvidia learned from these first two.

[@MrWalkwaySc2]

@@BuildsWithV Oh, I see. I'm glad i'm just now considering upgrades for my PC but i'll definitely wait to see what the new AMD cards can do as well. If Nvidia has a great launch then maybe that'll be the right choice for me.

[@ghaithist]

Can you fit 280 mm rad and 300 mm gpu in this case

[@BuildsWithV]

I don’t believe a 280 would fit but I could be wrong. Also I’m not too sure what the clearance for gpu with a radiator is honestly

[@bbawalan]

we have the same motherboard, case, ram and cpu

[@abdulelahx5482]

Epic

[@dreadfools4454]

Hi there, would you know if the ASUS RTX2070 8GB DUAL EVO Gaming PCIe Video Card DUAL-RTX2070-O8G-EVO-V2 would fit in this case?

[@BuildsWithV]

I don’t believe it’ll fit. It’s too thick and won’t have space to even breath if it would fit. But I don’t even think it’d fit.

[@Meln1K_]

Looks nice. If not a secret what brand of cables you used?

[@BuildsWithV]

Thank you! These cables are the inland cables from Micro Center. I like them cause they're nice and thick.

[@Meln1K_]

@@BuildsWithV Thx

[@edmarsouza4811]

Hi! How is the GPU temperatures on this case? My 2060s is running around 80c° and I'm kinda worried

[@BuildsWithV]

I didn’t get enough testing with it unfortunately so I’m not too sure what the temps would settle in, but with as small space there is between the chassis and the GPU I wouldn’t doubt it gets pretty hot. My only suggestion would be to maybe set your intake and exhaust fans a bit higher speed to try and get rid of all the heat quicker.

[@edmarsouza4811]

@@BuildsWithV I will try it, thanks for the reply!

[@EL-gu1oy]

@@edmarsouza4811 you can lower the temps by using a sfx psu but they are a little pricey

[@edmarsouza4811]

@@EL-gu1oy I imagine that it would be like 78c° or 77c° also, so too much money for too little difference :c

[@niklasw3196]

What you do with die USB-C hub at the front?

[@BuildsWithV]

If your motherboard has a thunder bolt usb-c header then you can plug it in there. If your motherboard doesn’t have that (mine didn’t) then you just leave it unplugged which is what I did.

[@carlosierra.]

What are some recommended motherboards with USB-C compatibility and wifi

[@vadimfr]

2:55 That peel was 🤤🤤😅

[@BuildsWithV]

LL Cool Hwip 😊 thanks

[@MavZc]

I'm guessing with that kind of cooler, a 3.5inch HDD is impossible to fit right?

[@BuildsWithV]

Correct, you may be able to squeeze it in somewhere but from what I remember it was quite full in there. Thanks for watching 🙏

[@imKanda]

OP should have used a SFF PSU for this build, it gives a lot more room at the bottom to give more airflow for the GPU. you can easily fit a 3.5in HDD at the bottom with a SFF PSU, with a full size it would fill up the rest of the room restricting almost all air flow from the bottom. bottom line: use a SFF power supply with this case ALWAYS

[@BuildsWithV]

@@imKanda very great point! Thank you 🙏 At the time I built this I couldn’t find one unfortunately.

[@imKanda]

@@BuildsWithV no problem friend, full size PSU still works which is what matters most. I used a full ATX when I first got my H210i but I did see an improvement in temps for my GPU when I swapped it out with a SFF. you can always make a follow up video if you get the chance to swap it and see if you see a difference, might be different depending on GPUs and their cooling designs. good video either way

[@hecheng5938]

You seems forget the dust filter in front?

[@BuildsWithV]

Yeah I may have forgot to do it in video 😅 Thanks for watching 🙏

[@OD.Nights]

So we’re not gonna talk about the aio? Like the cpu isn’t getting cooled down really since you placed the fans wrong.

[@aimarmartinrubio5774]

hi! Aproximate price for this PC? Thanks!

[@BuildsWithV]

I don’t remember for sure but I believe I got around the $1000 mark for this PC. Thanks for watching 🙏

[@Chris-gh5kx]

does the case support 2.75 slots gpu and 320mm length + 240mm AIO at the front?

[@BuildsWithV]

Chris the 240mm aio will fit in the front, the gpu can be up to 325mm length and as far as the 2.75 slot, I’m not too sure. I believe it only has 2 slots in the rear. (I don’t remember exactly) thanks for watching 🙏

[@BuildsWithV]

Chris Sorry forgot your mentioned the gpu and aio together. I don’t believe the 320mm card will fit with the aio in the front. If I’m not mistaken the 5600xt I used in this build was 254mm and it did have some space to spare, not exactly sure how much space but 320mm seems a bit too big with aio.

[@Chris-gh5kx]

@@BuildsWithV Hi mate, thanks for your response. do you think the EVGA RTX 3080 FTW3 will fit in the case?

[@BuildsWithV]

Chris I do not believe that card will fit this case. It’s a 2.75 slot card and this case only has 2 slots in the rear. Also even with the 5600xt card I had, it hardly had any room under it for the fans so airflow May be a bit bad since the EVGA card is even thicker. I wouldn’t recommend doing that card in this case unless you plan to water cool the card. It would look awesome in this case tho! But I suspect it’d have higher than ideal temps.

[@Chris-gh5kx]

@@BuildsWithV how about 2.2 slots card like eVGA 3080 XC3, sorry for a lot of questions, I am looking for a new GPU for my build. Also do you think it fit with the AIO at the front? this is the dimensions 285.37x111.15x2 .2slots

[@tggfg9547]

Is the thickness of this gpu more 2.0slot?

[@BuildsWithV]

Tg Gfg this gpu is exactly 2 slots If I remember correctly

[@tggfg9547]

@@BuildsWithV thanks!

[@kolosersoh9153]

Just friendly advice I heard putting the Radiator that way can mess it up. Just in case that happens turn your radiator around. But nice build !!!

[@BuildsWithV]

Ko Losers OH thank you, yes the best way to install it is with the hoses down. Unfortunately the hoses weren’t long enough and couldn’t be done. I usually prefer my radiator goes on top of the case which also can’t be done in these nzxt cases 😔

[@kolosersoh9153]

Builds With V, Oh well all that matters is that you did your best with what you had, and that your build is Beautiful. I’m definitely looking into having a H210 build after this video.

[@BuildsWithV]

Ko Losers OH I appreciate that so much. Thank you 🙏 I absolutely loved this build. Definitely won’t be my last ITX build for sure.

[@jrs1986]

@@BuildsWithV I don't have the same AIO but i have the same case. Did you try rotating the CPU block counter clockwise 90 degrees? I was able to get my AIO hoses down that way.

[@BuildsWithV]

jordan shaw yeah I tried various ways cause I did want it down but this aio just wouldn’t work that way. My gpu was getting in the way as well.

[@charlescuartero7521]

How much is this???

[@janishertmanis7246]

Would it fit a 300mm GPU with a water cooler? :) p.s.- cool video :D

[@BuildsWithV]

I do not believe it would fit. Space is fairly limited and I believe max GPU length is 325mm without water cooler

[@santanusarkar1320]

You Definitely Should gone with a Nzxt Liquid Cooler

[@BuildsWithV]

Yeah probably would’ve looked even better. But I didn’t feel like the extra money was worth it. I already went over budget on this build (as I usually do with all builds 😂). Thanks for watching 🙏💯

[@HowToRacist]

Cooler master is like half the price of the nzxt cooler

[@keichansuzuki372]

was the placement of radiator ideal? questioning for a reference

[@BuildsWithV]

I personally prefer my radiator up top in most cases, but in the front is a great location as well. With this case I had no other choice since there’s no room elsewhere. Thank you

[@nikossaliba7601]

NZXT h210 GPU Max Thickness (clearance) = 44mm and the dimension of the saphire GPU that u used is 254 x 135 x 46.5!!! How it fits ? and did u have any thermal problem later??!

[@BuildsWithV]

It fit just fine but definitely tight. I didn’t try gaming on it but I’m sure the gpu would get hotter than normal. I ended up changing the gpu to something more normal before getting rid of it. I think I put a 1660 super in it or something smaller.

[@mervin3x]

How much

[@EL-gu1oy]

I really dont like how the aio has to be mounted with the hoses on top in order to clear the gpu

[@BuildsWithV]

I agree, not a fan of it like this. Works fine and all but I prefer having my radiator on top of the case which this case doesn’t support. Customer was okay with this even after explaining it could fail sooner. I think a smaller AIO is a better choice in this case so you can mount it properly.

[@Netizen56]

@@BuildsWithV are you suggesting 120mm over 240mm ??

[@BuildsWithV]

@@Netizen56 for this case it’s a solid option, however I still prefer and recommend 240mm.

[@haruocool]

How did I miss this one 😠

[@BuildsWithV]

Dr3gono _ IDK 😅 usually you’re like 1st comment . Thank you 🙏

[@Chzeco]

why didnt you comb those custom cables bruh it looks like garbo

[@Tired_m0nkey]

if asmr was a person

[@ChocolateTony]

Total Price?

[@BuildsWithV]

Honestly don't remember but I think around $1100 or more when stock was good. In the current stock issues state... I'd say as much as a house 💯😂 Jokes aside, around $1100-$1200 I believe

[@ChocolateTony]

@@BuildsWithV Looks great well done!

[@serngamer1569]

Price in total?:3

[@BuildsWithV]

I believe I spent around $1000

[@alacrazte315]

How much was it

[@BuildsWithV]

I don’t remember exactly but I think I spent around $1000 give or take. Thanks for watching 🙏

[@danielchangvargas79]

¿Does anyone can confirm of this motherboard can be used for the ryzen 5 3600X?

[@BuildsWithV]

Yea it can be used with the Ryzen 3600X.