My NEW DIY Truck Camping build tour! Lithium battery upgrade, 12v fans, fridge, and it's solar ready

[@terryhughes5298]

Awesome tutorial, just bought my 2023 Taco and added the"Leer" topper fully insulated, got as far as the Dometic cooler w additional lithium portable charger, accessory available. Will invest in the solar set up as well. Appreciate the additional instruction suggested for fully integrating it all. Thank you

[@Outside605]

Sounds like a good start! Thanks for watching.

[@russellb.6785]

It seems the F-150 Powerboost would be a great starting point for a truck camper build. Easy power to run portable AC.

[@timgoodsell4053]

Very slick build. The electronics are better than a lot of van builds. Well done.

[@Outside605]

Thanks for the kind words and for watching!

[@joesmithatridecorp9011]

I really enjoyed watching your work- I am just starting out(retiring) and recently got my 1st gen Tundra, then found a cheap topper (Leer) I paint so sprayed it to match and moving toward my build. I promise you saved me from making some Big time mistakes and lessons I would of had to learn- Thank You!!! Have a great day and keep dropping this content on us!!!

[@roypboston1]

This answered all my questions on how my electronics need to be. Great video and great set up! Now time to buy!🤣💯

[@Outside605]

Awesome! Thank you!

[@ddubs6969]

This is such a simple and well thought out build. I like how you redesigned it to fit your needs. The diesel heater buit into floor is perfect aswell as the computer fans. I would do a build very similar to this if i didnt have my little truck camper. My truck camper has a very similar setup to yours with being inside a small camper. I might even build in some small computer fans around the sleeping area to keep me cool in the summer.

[@Outside605]

Thank you very much!

[@johnunderwood9575]

Very informative and enlightening video. I love how well thought out and complete you're build is, as well as your video. Thanks for you're contribution! It has real value!

[@Outside605]

Thank you!

[@adithyachintalapati6851]

Your electrical set up is perfection redefined !! Awesome job !

[@Outside605]

Thank you!

[@nathanlowry4475]

I know its already been asked, but i also would love a very detailed "how to" video about your electrical setup. Great build!

[@Outside605]

Coming soon!

[@russellthompson6204]

Great video! Impressive build and you've inspired me to do the same. Would love to see a very detailed video on the electronic set up for those of us who don't have knowledge about putting something like that together.

[@Outside605]

Coming soon!

[@ricardovillalobos8052]

Looks great dude! Im in the process of building out a High top shell on my 03 ext cab tacoma. Every little idea helps for sure. you've done an amazing job mi amigo. keep it up!

[@Outside605]

Thank you and good luck with the build!

[@rbljackson]

Definitly some improvements made on this one over the previous model. Great ideas in here...thanks!

[@Outside605]

No problem!

[@aloysiusfontaine9364]

This is top notch! Great design on both builds. Definitely modeling mine along these lines. Now, just need to learn how to wire fuses….

[@Outside605]

You can do it!

[@aloysiusfontaine9364]

@@Outside605 I did! And it’s dope! Thanks for the detailed walkthrough. Gonna see how these Midwest temps treat me before I cut a hole in the bed of my truck for the diesel heater turret, since I use my truck as a truck more than a camper.

[@craftbuildchill]

Awesome camper build, very thought out and practical. Definitely will use many of your setup for my Tacoma build. Thanks for the great walkthrough and explanations. It would be awesome if you went into more detail around the electronics wiring etc. That's what I need to figure out and seems very daunting task wiring all that stuff up.

[@Outside605]

Thanks for the kind words and for watching. Would a video on basic 12v wiring be something people would be interested in? I’m open to doing it. I’m thinking along the lines of 12v battery, power disconnect, fuse block, wire splicing/termination, etc. Thoughts?

[@shitloveaduck]

Something to consider is putting the bed on the passenger side. Then you can go as high as you want on the cabinet side without obstructing your rearward vision. I have a set up I built for a Project M camper that has the large windows on the sides. The buddy wanted a second bed single width. We did it on the passenger side. On the drivers side we have a TV and gaming console for his boy to mess around with and they can use the bed like a sofa to watch movies. I also built drawers under the bed for 48” with shelving in the front of the bed accessed from the middle of the camper. They have still tweaked it to fit their needs as they learn, but they are really glad they can see outside of the passenger window in the city. To each their own of course. I like this 2x2 build and they are strong enough for sure. I went the cabinet way so it’s all plywood and glue & pocket screws reinforcing the joints. Many different ways to build them. I got lazy for my personal camper and have a Rayzr that has a simple bed/dining set up with a kitchen, hot water and added my own wall AC unit. I have a F150 with the 2.0 kw Pro Power Onboard and that runs everything. Saves having to set up an elaborate wiring set up. The 100ah Lithium based set up in this build really is nice!!

[@paulmarshall7328]

@@Outside605 yes please do a video as you suggest

[@UGATimberDawg]

@@Outside605 a video on the electrical/wiring setup would be awesome!! Love the build out!

[@jamestripp9145]

Planning on doing a build in my truck bed in the next few months and I am telling you now I am stealing like 90% of what you have done. The electronics setup is too clean and compact for me to not copy, I do plan on running 2 batteries though but even in your space it seems you could have easily fit a 2nd if needed. love the 2X2 build for the framing, I am a bigger guy but structurally I feel as if I can still get away with it. Awesome build thank you for sharing with everyone!

[@Outside605]

Thanks for watching. The 2x2 frame is plenty strong if built right. 2 batteries would be an excellent idea for extended run time or higher power needs. Sounds like you're on the right track. Good luck!!

[@WellsLarry]

Everything is fused except the main wire going into the switch. Yes your loads are fused, but your supply is not. A fusible link would be a good idea.

[@Outside605]

Thanks for watching. There is a breaker on the battery leading to the fuse panel. When I film, I'm pretty good about forgetting to mention things.

[@jayb4254]

You could add a $12 changeover switch to the battery input for your inverter, and run wire to your truck battery for the "B" connection of the changeover switch. That way, with no extra cost beyond the switch, wires and a fuse, you could turn on the truck, then flip the changeover switch, plug the 110V inverter output into your battery charger, and recharge your lithium battery off your truck's alternator at any time. Your electric power would be limited only by your gas tank at almost no additional build cost using the great set up you already have. That assumes your charger does not pull more than the 500W your inverter can handle, which is almost certainly the case. If you don't want to mess with the wire through the truck, you could do it externally with wire with jumper cable clips on one end.

[@Outside605]

Not a bad idea. Once the heat of the summer is over, I have a few modifications to make. Thanks for watching!

[@ch3vy327]

Or maybe a DC to DC charger little costly but another option. Great build btw.

[@donniehelmly4920]

DC 2 DC charger

[@victorventura1956]

Really nice build

[@Outside605]

Thanks!

[@SacredHeart0520]

Ever thought of running shore and solar connections to come out where your trailer light plug does . So u can be hooked up and have it closed

[@Outside605]

Working more than full time, I rarely have time to camp more than a couple days at a time. My 100ah lithium battery is more than enough power to get me through a weekend. If I ever get more time to travel, a solar setup would be ideal. Thanks for watching.

[@karengreen5287]

What a great and practical build. Do you have a parts list and wiring diagram for the new to electrical group:) Thanks for sharing this build!!!!

[@Outside605]

That's something I have planned for a new video. I've taken a bit of a KZbin hiatus to do some bucket list trips. I'll be filming again real soon. Thanks for watching.

[@Rock-bf2ee]

Nice modular build. You could sell those. I want the shore power and solar plugs on the back. Really clean build very nice job.

[@Outside605]

If I had more free time, it's something I've thought about for sure. I've had several people send me emails asking about building one for them. Thanks for watching.

[@daveholte7658]

Been looking for your videos for awhile I have same truck topper and a fisherman and travel a lot. I like how you have implemented “boating electrical” into the build I have done the same I like the bed storage frame and looks similar to what I did in my 6.5’ truck bed length The only dilemma I have is I installed years ago a 49 gallon aux fuel (diesel) and tool aluminum box in front that takes up a lot of space And also have to create my bed platform on top of the aux fuel tool box, After the mattress installed it seems to be a little claustrophobic from sleeping to top of ceiling.. But always thinking You done an excellent job I usually pull a Ranger boat of my little jin boat I won’t buy a rv trailer and a Leer topper truck combo worked great for a single guy Maybe there is way to tie or plumb in a line for a diesel heater. Thanks for all great videos!!!

[@Outside605]

It's always a challenge to make the best use of space in the bed. But where there is a will there is a way. Good luck fishing and safe travels!

[@richardspengler1794]

It sounds like Amazon loves you!

[@Outside605]

I'm sure they do ha!

[@ThePikeHunter1]

You gave me the perfect ideea to set up my truck for my fishing trips. Thank you very much.

[@Outside605]

Amen brother. That's exactly why I build my trucks like I do. So I have an easy, comfortable, and dry place to crash on fishing trips. I've been doing this a long time and my builds have evolved along the way. Started out with a cot and a sleeping bag way back... Thanks for watching and safe travels.

[@kfusmc]

Looking at getting into truck camping when I retire. Love the build guess I'll start with the basics and build my way up.

[@Outside605]

Thanks for watching! Safe travels and best of luck on the build!

[@Nonmotivated]

Do you have a video on how you went about building that diesel heater pump silencer box?? At the very least, it'd be nice to hear it running to get an idea on how well it quiets the pump down. They can be quite annoyingly loud and tons of people try to figure out a solution…

[@Outside605]

It's certainly not perfect but it makes a noticeable difference. If I find the time, I'll try and do a more detailed video on the box.

[@jlo7770]

It's a really "simple" good looking build. The electrical is very simple and clean, I really like that. Lots of good ideas, really like the different 12v quick connect plug ings.

[@Outside605]

Thanks 👍

[@jaimymac7]

Your first build was really good, but this one is great! I really like the additions! One question, is there a specific reason that you made your sleeping platform so tall? Most people have them just above the wheel well. Here’s a suggestion on powering your fridge, I wired mine to one of the switches so I don’t need to plug and unplug it, I just turn a switch on. You do have a couple spare switches front and back that you could hook up to. Thanks for the great video!

[@Observer61]

A high bed allows for more gear storage underneath but sacrifices ability to sit up in bed. I use a folding chair alongside the bed for sitting.

[@Outside605]

Thanks for the kind words. The height was to accommodate more storage to stay better organized on trips. Thanks for watching.

[@kimalmon]

Hey, very cool build! I plan on using several of your ideas (most of them really :)). Thanks for putting them out there my friend!

[@Outside605]

Thanks for watching!!

[@JohnLaFosse]

The SAE connectors are sound advice. Now I just wish my slices weren't always falling apart too.

[@Outside605]

They work well for that purpose. Thanks for watching 👌

[@nefarious_kaos6737]

Very nice build man. Do you have a list of the parts you used for your 12v setup?

[@Outside605]

I have a video planned with that in mind. Just need some free time to film it. Stay tuned.

[@jds7249]

Really nice building! Still searching for a camper shell for my 2011 tundra double cab!

[@Outside605]

Don't give up, keep searching. One will pop up eventually!

[@MikeBabsBC]

Absolutely love this build!! I just finished the shell of my camper and was looking at ways to build out the interior and I really like what you did here. Question on the batter level display, do you find that it's accurate and is it effected by having a load on?

[@Outside605]

Awesome! Thank you! It's not completely accurate but it gives me a rough idea. It was better with my old AGM battery. With the lithium (even though it has a lithium setting) it's not as accurate.

[@DadMoves]

Beautiful build. Your expertise and experience is clear and I appreciate you sharing. I subscribed so I can see more.

[@Outside605]

Thanks for the sub!

[@36PawsPNWC]

Best explanation I have listened to regarding setting up all your electrical needs!!! Excellent!!! Thank you!!! 👏👏👏

[@Outside605]

Glad it was helpful!

[@LifeAtTerminalVelocity]

Giving me lots of great ideas for my build out! Thanks man.

[@Outside605]

Glad to hear it!

[@wctyre49]

Very nice build ,I like your battery set up.

[@Outside605]

Thanks 👍

[@contentofcharacter]

Great video. Thanks for the inspiration🙏 I’m working on my build this weekend.

[@Outside605]

Good luck!

[@Flash1857]

Barn wood looks good. Like the build. Thanks

[@Outside605]

Thanks for watching!

[@dontheplumber9338]

Nicely done!

[@Outside605]

Thanks!

[@debrastover562]

Love all your power source set up!!! Wish I could do this ... i have NO knowledge of where to begin, starting to get my Van ready, .... hopefully by end of Sept. You have a very Nice set up 😊

[@Outside605]

You can do it! Basic 12v wiring is pretty simple and there are some good references online. It gets a little more complicated when it comes to solar and big inverters but it's all doable. Make sure your wire size is appropriate for what you are doing.

[@brettmartin764]

Nice video!! Can you share with us how you built your bed box? Fasteners, hinges, dimensions, 2x2 legs 2x4 frame, 5/8ths” plywood overhang, etc

[@Outside605]

I will try to do a follow up with thus information. Thanks again!

[@wayneg8990]

Nice upgrade I am working on a setup somewhat like yours Gave me a ton of thing to check out . My shell is 6" higher and I have a 8' Truck bed. ThNKS FOR THE INSITE.

[@Outside605]

Good luck! Safe travels

[@cic-jakevanddalgeemyers.2739]

This Texas kid does things big..... Like the saying goes: everything is big in Texas.........you really rep your city, man. Excellent job 👌👌....

[@pozouli]

Excellent work and design. Would you mind telling me the dimensions of your bed frame ? I would like to make mine like yours. Thank you, and congrats.

[@Outside605]

Roughly 28"w, 74"l and 17" tall.

[@samuellee-wt3ze]

Hi. Thanks for your information on the camper setup. I'm not sure how the diesel heater exhaust you vent to the outside. I see the whole unit is inside the cabinet. Are you have any concern of Carbon Monoxide build-up inside te cabin?

[@russhughes9273]

i wish i didnt have a short bed so i could enjoy that setup! i have to sleep diagonally

[@Outside605]

The short box does make things a little more interesting. I've seen some people make them work but it looks a little awkward if you're tall. I'm sure you can figure out a way to do it though. Thanks for watching!

[@eileendooley6344]

Very nice, starting my own soon, have solar in my travel trailer, putting second setup in the Tacoma soon.

[@Outside605]

Good luck on the Tacoma build and thanks for watching!

[@davidwright1728]

Best build I have seen....

[@Outside605]

Thank you.

[@rudybecerra9915]

Love your rig ! Did you have to put "helper" leaf springs for the added weight ? For security, I've added the old style gate slide pins on the shell door and tailgate for additional security from the inside.

[@Outside605]

Thank you. On this truck, I didn't have helper springs. it never really squatted it. On my new truck and build, I added sumosprings to help with the added weight in a smaller truck. Thanks for watching.

[@bearlycamping]

Love the set up and idea of these! Do you have a lot of dust come in from driving down the Forest Service Roads when it's dry?

[@Outside605]

I try my best to seal it up before building. Unfortunately, dust gets in there still. I keep a small rechargeable hand vacuum with me and it makes getting rid of the dust a pretty easy task. Thanks for watching.

[@robertkulpa7960]

Awesome job! Would love to see links for all of the products that you used as they were all awesome.

[@Outside605]

Great idea!!

[@MrBluoct]

Andy, A generous, interesting update and build- Another example of real time field use and how it influences the utility / functionality & usability of space … clean Well done!! Thanks!

[@Outside605]

Many thanks!

[@Aonexia]

Great Build!

[@Outside605]

Thank you.

[@rubberdiscoduck]

This was an incredible built very well thought out it's definitely going to help me when I build mine

[@Outside605]

Thank you!

[@milwman1958]

Thats sweet a lot of good Ideas. One thing do you wish the platform was lower?? Scott

[@Outside605]

No. I build it like that purposely so I can store a 5 gallon pain under it. Still plenty of room for sleeping comfortably. If I want to sit, I have a short chair back there that works very well. Thanks for watching!

[@NMHiker]

Hi, I really like your build. Thought out very well. Can you tell me what size hinges you used? I'm thinking they are 4 inch? Also, in your first build video where did you get your fleece windows coverings? That's a great idea.

[@Outside605]

I bought the material at a typical fabric store. It came in a large piece that I cut to size. I believe the hinges are 4" indeed. Thanks for watching.

[@paulmarshall7328]

I watched both the new and old set up tours. Thanks for many ideas. Great work! Where can I learn about the electrical aspects and how to wire it up. Specifically about the routing and fuse box etc? Any response is appreciated. Thanks!

[@Outside605]

I plan to do a video on 12v wiring basics. I'm no expert and wont claim to be, but I've played with it enough to be confident in my work. Free time has not been friendly to me lately so as soon as I get a chance... Thanks for watching.

[@countrymu]

Anyway you can add notes with links to electrical components. Thank you

[@Outside605]

I will try to get that up this weekend. Thanks for watching!

[@julianwilkerson7744]

Awesome set up. Very well thought out. I have a pop up camper and was wanting to build out a box on one side of my truck bed for storage, but also as an extra sleeping platform. This gave me some great ideas. I love the light and removable box, the 12v to SAE conversion and your wiring set up. Thanks for sharing and keep up the great work! 👍👍

[@Outside605]

Thanks for watching!

[@jameschilton20]

Awesome build! Very clean and creative.

[@Outside605]

Thank you! Cheers!

[@bradrichards2093]

Awesome build, how many days can you run the battery/frig/heater/electronics before needing to recharge the battery?

[@Outside605]

On the lithium, probably 3-4 days. In the middle of summer when it's extremely hot back there and the fridge is working constantly, a little less. I've had the fridge itself run for 5-6 days in cooler weather.

[@mdolanot]

Wow, this is awesome. How much would it cost for you to make one of these of someone else?

[@Outside605]

All in, this is probably in the $6-700 range including the lithium battery. Take the battery out and use a cheaper lead battery and it would be around $500 to build yourself. Thanks for watching.

[@benjustice492]

Awesome build! I'm in the process of building out my camper shell and will definitely incorporate many of your ideas. Few questions if you don't mind answering: (1) You said you wanted to make the bed frame so it's easily removable. How do you easily move it out with all the wiring connections? Do you have a way to easily disconnect? (2) The diesel heater looks neat but how is the smell of diesel? I know nothing about how these work and was curious about the odor. Is it possible to list all the parts you used. I don't need the actual links, just a brief description and I can easily look them up. Thanks again for the video!!

[@Outside605]

Thanks for watching. The wiring is all contained inside the box. There are no connections to the truck itself. The battery should be removed first due to weight but that's really it. Diesel heaters really have no smell unless you spill during a fill up (this has happened) but overall they are a great device. Links to most of the parts are in my first build video. I carried over many of the components from that one.

[@warrenscorner]

Great build! This will give me some inspiration for my build. How wide is your foam mattress? I was thinking of going 24” but I’m not sure if that will be wide enough.

[@Outside605]

I think mine is about 24" I will have to double check. Thanks for watching!

[@JIgginCrappie]

Watched both of your videos on this. Really nice setup

[@Outside605]

Awesome, thank you!

[@susanlin7778]

This is exactly the video I needed 🙌🏼

[@Outside605]

Thanks for watching!

[@jmuller174]

Greta video, do you have a schematic for the wiring and also, do you have links to any of the products.

[@Outside605]

I plan to do a video for both really soon. Thanks for watching!

[@Gman-qm6bv]

Very impressive, wow!

[@Outside605]

Thank you.

[@ironboyz4872]

Hey Bud. Great build. Question: Would you ever or do you feel like you've ever wanted to convert your box to having a pull out drawer so you dont have to climb in and lift up your bed each time you want to get in for supplies ? Curious to know because I am about to build a bod for my truck and cant decide on design.

[@viki6Gaming]

You could set that entire setup on a "Decked" slide drawer

[@Outside605]

I've never needed a drawer but i know some people prefer that. Mine has individual hinged lids to get at my gear. Works great for my needs. Thanks for watching.

[@tempusfugit3635]

Very neat 12v setup, i like how everything is framed. The noco battery chargers are great

[@Outside605]

Thank you! The charger has been great so far. Thanks for watching!

[@roaddog4334]

Great build. Slainte

[@Outside605]

Thank you!

[@JimJNebraska]

I thought those diesel heaters needed to be exhausted. I didn't see an exhaust on yours?

[@Outside605]

It's exhausted through the bottom of the truck. If you look at my other videos, I have one that shows the installation. Thanks or watching.

[@PabloHernandez-qj1gd]

Could add links to all your items and where you purchased them.

[@Outside605]

If you look at my newest build video - it has links to everything listed here and more. Thanks for watching.

[@julijopeterson7096]

Nice rebuild.👍🇺🇸

[@Outside605]

Thanks 👍

[@johnathanstheater]

Great job. Fine tuned version one for version 2 !

[@Outside605]

Thanks!

[@russhughes9273]

can you please put a link for everything you got off of Amazon? That setup is awesome!!!

[@Outside605]

I'll try to get something like that up. Thanks again.

[@DavidChappell-gy5up]

Great detailed description of the electrical setup. I'm looking for ideas for a cross country road trip and I think you've pointed me in a great direction. Two questions, is it possible to tie you're battery into the truck to recharge it while driving and how do you vent the exhaust from the diesel heater?

[@Outside605]

Thanks for stopping by. You absolutely can charge the battery from the truck's alternator. The issue for me is I'm using a lithium battery. Typically lithium takes a different charger than lead or AGM batteries. I don't think it would play nice with the truck. If you used a lead battery, you would be fine. Lead batteries just don't last as long as lithium and they're much heavier. My 100ah lithium weighs about 20 lbs. A 100ah lead battery is 60+ lbs. The diesel heater exhaust is vented through the floor and out the back of the truck.

[@kenuber4766]

Bout time you came up with something!! HaHaHa, It turned out great. Although I thought the last build was good as well. Now lets get out there and do some camping and fishing!!

[@Outside605]

Once our weather finally straightens out. We've had terrible rain, wind, and snow almost every weekend all spring. Soon it will be game on!

[@larrydog171]

Very nice and super clean setup 👌 great job

[@Outside605]

Thanks! 👍

[@larrydog171]

@@Outside605 Your Welcome!

[@jamesgaul3544]

AMAZING!!! Well done.

[@Outside605]

Thanks for watching!

[@JohnDoe-1000xt]

nice setup..gave me some ideas on my build THANKX ;0)

[@Outside605]

No problem 👍. Thanks for watching.

[@matthewpritt3242]

Great build but what did you do about the exhaust from your diesel heater

[@Outside605]

It's vented through the floor and out the back.

[@michaeleveleth7979]

Thank you Love the detail in your work efficiency organization well thought thru. Looking forward to see it up close and personal so if your coming to TF let me know so I could come and check it and just visit again.

[@Outside605]

Thanks Michael. Maybe sometime we'll cross paths around Salmon Falls.

[@pv4669]

Nice improvements over the original build. Do you have any build video that you can share? I am curious about some of the placement of the 2x2's and the plywood overhang. Cheers!

[@Outside605]

I started to film the build but the weather never cooperated with my schedule. A lot of start and stop because of rain, wind, and snow. If there is something specific you're looking for, I can try my best to show or answer it. Thanks for watching!

[@TheSquirrelman91]

Can we get a build sheet for your platform?!?!?

[@Outside605]

This truck and build is gone now so I don't have a way to get specifics. I built a brand new one for my current truck which if I ever get free time, I'll get a detailed video completed. Thanks for watching.

[@Routecloud9]

This is awesome! We need some links to all the products!

[@Outside605]

I’ll work on that. Thanks for watching!!

[@lylestavast7652]

nice job guy :)

[@donandersonanderson1595]

Sweet setup Andy. Enjoy watching the video's!!

[@Outside605]

Thanks 👍

[@yaoshengxie1611]

Wow! The Jbl Bluetooth speaker you use is actually the same as mine, but why do you put it at the end of the bed?

[@Outside605]

I have it there because I'm typically listening outside the truck at the campsite. Thanks for watching!

[@CamperGirl03]

Well thought out!! Thank you!!

[@Outside605]

Glad it was helpful!

[@joemarchinski914]

fresh air intake and exhaust fumes from deisel heater location....just curious because I never used one but am planning a similar build in my 2001 f150 8' bed ...already have lear cap on it with factory carpet, looking to be as self susstained as possible.... veey nice set up you have

[@Outside605]

Exhaust is vented through the floor and out the back. The fresh air inlet (for combustion) is opposite from the exhaust but also under the truck. I always keep a carbon monoxide detector near me and it's never gone off while running the heater. For an additional level of safety, I crack a window a slight bit. Thanks for watching.

[@StonnieDennis]

Very nice! Thank you.

[@Outside605]

Thanks for watching!

[@countrymagic61]

You have a nice build and you built it for you to use. Awesome. 👍 As far as running lights, charging devices, inverter and running a fridge...You can run on an AGM battery. I ran all those items except I ran two fridges. I also had a microwave available for use on a 1500 watt inverter. But did not use it on this trip. I did a quick build in the back of my truck so I can attend the Overland Expo West 2022. I arrived Monday 05/16/2022 and left the following Monday morning 05/23/2022. Awesome time. good people, and an awesome event. All I have so far is a Redarc smart battery isolator (SBI) to charge the auxiliary battery from the alternator when the truck was running. While parked, I have a 160 watt, 18 volt solar panels w/charge controller. 12 volt, 100 Ah AGM battery. I did have a couple of mishaps, but they were operator error. Once fixed, I had no other issues. everything ran fine. However, while at the expo, I did purchase a Redarc dc to dc charger. Just got it today (5/27/2022). Will have it installed before my next trip out (before fathers day). With the Readarc charger (MPPT Charging), I can eliminate the solar charger (PWM charging). Wish I could show you my quick build out and set up. 😎 If you are going to run a large inverter, and your auxiliary battery can be charged from your alternator, I would recommend starting your vehicle while using the inverter. Also I would upgrade the Renogy Wanderer charge controller (PWM) to a MPPT charger. The PWM is an older technology, while the MPPT is newer and maybe better for your lipo battery. I'm not an expert, but I least look in to it.

[@frankimperiale4470]

Where can I find a mattress cover like yours what options and sizes

[@Outside605]

Amazon. I'll have a video on this soon.

[@Jason-fs9pz]

What would you say is the cash outlay for this job set up.

[@Outside605]

Using Amazon for the electrical components, the cost would be roughly $300-$400 without the battery. The 100ah lithium battery was about $400 on it's own. Well worth it though. Light weight and will power my electrical items/lights/fridge for a long weekend of camping. Thanks for watching.

[@bmoore3199]

What Brand and size diesel heater do you have ? Nice build !

[@Outside605]

It's a Vevor 2kw model. Perfect for this application. I believe anything more would be too much for most winter camping. This one is on year 2 and it's been flawless for me. Here's a link: s.vevor.com/bfP5hx Thanks for watching!

[@bmoore3199]

Thanks so much for the reply and link.I will be ordering one today.

[@MDCUSA-m5g]

do you have a link for the fans

[@davidschlarp1606]

Did you cut a hole in the bed of the truck for the intake and exhaust of the diesel heater?

[@Outside605]

Yes, I cut a single 4" hole to mount the turret plate for the diesel heater. Not ideal, but it works. Thanks for watching.

[@isidorodelapaz8207]

Beautiful setup

[@Outside605]

Thanks!