My new Gaming/Editing PC - Asus Pro Art PA602 | Ryzen 9 7950X | RTX 4090

[@eraz3rraz3r78]

Looks so good thanks for this my Case comes tomorrow cant wait to build

[@neshd]

This is the best review of the PC/Case from the KZbin! Thank you so much I was afraid that my EK 360mm nucleus Aio will not fit, but you explain it very well and I'm very happy that I can put my Aio there too and I don't need to buy another one. 😍

[@i_ALX]

Wow, that is a chonker of a case. At least it makes it easy to build and allows a good amount of air 🙂 Super nice the mod for the Arctic Liquid Freezer III is not hard to do, but would be better if Asus was more accomodating with their design.

[@LevelUPGamingTech]

Chonker for sure 😄 Asus did intend this case to be used with their 420 AIO, but we all know that LF3 is a better choice although it's "chonker" but luckily you can "persuade" it to fit 😄😂

[@Xettabytes]

Since finding the PA602 I knew I wanted to build my next pc in it. I am looking for the best 420mm AIO. I wonder why choose Artic 420 over ProArt LC 420? Any idea which pump is less noise?

[@vladsta3833]

You said the Be Quiet case is big as if this one isn't. Pretty sure the Lancool III could fit the old arctic 420 aio, dont know about the new one. Excellent build in the end.

[@Viqsyy]

I bought this case too. Had the arctic liquid freezer 420mm on the order but had to cancel it since I came upon a reddit post saying the aio wasn’t compatible with po602, went with LianLi hydroshift instead

[@ramadorpl]

Hi. I'm currently assembling a computer, I ordered a Phanteks vn5 case and I'll also order an Asus Pro PA602 because it looks great and I'll have to keep one of them. The PA602 is a bit big but I'll see it live when it arrives. Best regards

[@LevelUPGamingTech]

Oh yeah, PA602 is a bit bigger than NV5, you will see 😉 Both cases are awesome PA602 is more focused on minimal design and awesome airflow, while NV5 is more of a "showcase" but too has great cooling as well if you mount an AIO on the side

[@ramadorpl]

@@LevelUPGamingTech Thank you for your quick response :) I bought my son a white NV5 with AIO from Lian Li and fans all SL-INF and it looks great, I wanted to do the same for myself but as you wrote that NV5 is a showpiece. You wrote that NV5 will have good cooling if I mount AIO on the side, didn't you mean on top? I'll see when PA602 arrives. Thank you and best regards

[@LevelUPGamingTech]

I meant exactly that, it has better temps if AIO is on the side as an intake and you have just 3 fans on top as an exhaust, also one at the rear and one intake at the bottom in the front, best temp combo 👍

[@ramadorpl]

@@LevelUPGamingTech Please tell me if this Arctic Liquid Freezer III 360 cooler is good? or is it better to buy EK Water Blocks EK Water Blocks EK-Nucleus AIO CR360. Thank you and best regards

[@LevelUPGamingTech]

@ramadorpl LF3 all the way, and in PA602 you can fit LF3 420 🤘

[@SupraManG]

Nice build, bro. Here's a question: Since you have 4 of the same drives, how did you know which to install Windows on?

[@LevelUPGamingTech]

Thanks bro 👊 It says Drive0 during installation 😉

[@SupraManG]

@@LevelUPGamingTech Interesting.

[@WondersChannel]

Call me Mr Cynical here but I'm not 100% convinced by the ASUS claim that you can train air to run nicely up a slope just cos they want it to. That's not quite how science works. There is clearly a gap either side of the slope so a good deal of that air intake will just blow around the slope and miss the graphics card. But that said I'm pretty much decided I do want this case. Lost all my faith in Kingston RAM. My previous Windows 10 build was constantly restarting randomly, and blue screening. For months I was at a loss. Then swapped the RAM to G.Skill instead - never had 1 single problem after that - which rather obviously pinpoints the RAM - as nothing else was changed. Finally what is this invisible graphics card support you mentioned? I looked for something when you put the graphics card in but didn't see anything. Or do you demonstrate it in another video? I'll be quite happy to actually have a built in graphics card support! My current Fractal case doesn't have anything. And great video!

[@LevelUPGamingTech]

Case is great for airflow you won't mistake! Regarding Kingston, I have only and only positive experience using their RAM years and years now, wo idk could be isolate case on your end, but again there are XYZ on XYZ hardware combos possible. The invisible GPU holder, search for Lian Li GB-001

[@WondersChannel]

@@LevelUPGamingTech Many thanks for the response. Yeah PC building is an infinitely impossible thing to pin down with issues! I'm not saying "Kingston RAM IS BAD!!", just not for me anymore after that experience. Ohh yeah I remember that graphics card thing now I found it. My god that looks like more than my little brain can handle! I think I'll just use the ASUS one in the case. 😂

[@kalitvenec]

I have only one question - where can I download the same wallpaper?

[@LevelUPGamingTech]

Found it on Reddit UltraWide wallpapers, beats me the name and all 😁 Shoot me an email I can sent it to you, mail is in the about section...

[@unmaykr1434]

Hi. I was planning to buy lancool iii with 3 bottom fans but then i saw this case which one do think is better in terms of airflow especially for gpu since i play on 4k

[@LevelUPGamingTech]

I was using Lancool III for a time, great case as well, but overall I am getting better temps in PA602, 2 maybe 3 degrees top, but it's more quiet in the end

[@unmaykr1434]

@@LevelUPGamingTech 2-3 degrees for gpu or cpu? Do you think i get better temps with this one or lancool iii with 3 bottom fans? Also thank you for quick response

[@enesbey11]

In many videos they say that the Artic Liquid 420MM model is not compatible with this case. I guess you did not have any problems.

[@LevelUPGamingTech]

I explained how it fits and showed what needs to be cut 😊

[@enesbey11]

@@LevelUPGamingTech The model I am interested in is the Arctic Liquid Freezer III 420 (ACFRE00137A) without light. Are the dimensions the same as yours? Thank you

[@LevelUPGamingTech]

Yes it's the same 😀

[@cogitationescaecae1125]

Its not.

[@enesbey11]

@@cogitationescaecae1125 what did you want to say?

[@thereallordfarquaad4192]

Cool build! I currently want to build in the same Liquid Freezer III 420mm in the PA602, but just can't get it to fit in there. I would really appreciate some advice. Have a nice day!

[@LevelUPGamingTech]

Cut the top piece first that is a must, so you can close the top. In order to mount the 420 on the rails, loosen the screws a bit on the radiator just a tiny amount. Then insert it all in and just move and wiggle the radiator in place, it will fit, I did this 4 times already with this case, so it is easy :D Then tighten the screws on the aio itself. You can't install the back antenna metal piece, that one goes out... Pretty much that is about it

[@thereallordfarquaad4192]

@@LevelUPGamingTech Thank you for your quick answer! How do you mount the radiator and the fans on the case mounting piece that you can get out? Every way i try the tubes and tubings are in the way so i can't get it into the case. Im a bit lost on that one, as it is the first Pc and AIO for me.

[@LevelUPGamingTech]

@thereallordfarquaad4192 metal rail goes between the fans and radiator, you are like sandwiching that there 😉

[@DrawwithAzhar]

Should i go for i9 14thgen or ryzen 9 7950x i do vfx cgi work software i use are adobe suite blender houdini unreal engine etc

[@LevelUPGamingTech]

Idk what to tell you, Intel is better in Adobe for editing, but it has issues with chips dying now... I personally avoided it this time and went with AMD

[@DrawwithAzhar]

@@LevelUPGamingTech thanku so much dude for instat repling I'm just on my way to the pc shop buying that cpu and mind was totally covered with confusion this time but cleared all out 🤍☄️ going for the ryzen 9 7950x

[@LevelUPGamingTech]

@@DrawwithAzhar Anytime man, good luck with your PC 😀

[@vitamin23dz]

I think lian li lancool 216 will be amazing for this build 🤔

[@LevelUPGamingTech]

Tried it, not the same level of cooling as this one 😉 CPU Idle 46-47, goes to 95 for max but with lower clocks as well. The GPU is choking since this board has 1st PCI slot 1 position lower and the GPU is literally choking, fans do not help, I mean additional at the bottom. Lancool III on the other hand is better 👍