I Love this video! I have an rc10gt and I was playing with it yesterday blasting up and down my street, and an extremely generous neighbor came and dropped off his old tmaxx 3.3 he said he has sitting in storage, it has ti skid plates and bumpers as well as drive shafts and turnbuckles, all rpm upgraded shock towers and control arms even au bulkheads and chassis braces, unfortunately from sitting so long odds and ends like batters and servos need replacing but I will be taking it out A.S.A.P.!!! Best bet my new buddy will be getting a fat rack of smoked ribs soon!!!
@thebug4046Ай бұрын
Hell yeah buddy that's awesome! I will suggest maybe pulling the engine apart and doing an Overhaul bearings wrist pin and new rod os lc3 plug as well just to be sure everything is ready to go! But definitely sounds like you got one hell of a deal enjoy man 💯🍻😎
@justindjpАй бұрын
@thebug4046 Thanks a million for the suggestion. I definitely will be doing that now before I try to start it!
@a2rcАй бұрын
That’s some of the best garage I have seen in a while lol - Super nice of the guy to give it and for you to share parts with your buddy. Looking forward to seeing some updates over time - Thanks for the vid Bug 🩷
@thebug4046Ай бұрын
Right? I was so surprised haha and I like helping people get into the hobby 💯
@adamsrcsandadventure700Ай бұрын
Awesome mate good deal 💯👍
@David-069Ай бұрын
That one with no wheels or engine is the 2006 4909 3.3 short wheel base chassis with the 4mm thick 6061 alloy chassis plate i would rebuild that one and that’s the original body from it
@thebug4046Ай бұрын
Both the 3.3 tmaxx are the same i believe i will look it them a little more 💯🍻😎
@stevelamonte1962Ай бұрын
There arr 3 things to look for . If the transmission are the gray color and has reverse ...and it has the thicker driveshaft and it's on the short chassis then it's the model 4909 which the first model of the 3.3
@thebug4046Ай бұрын
Ah gotcha thanks for the heads up!
@josephsaucedo8691Ай бұрын
The drive shaft and axels aren't originally steel? The battery box on the one I worked on had a few problems with It. I ended up using the battery holder out of a savage i put rechargeable a a in it and heat shrink them in the case. the on and off switch didn't work also so I removed it and replaced it with a rocker on and off switch and solider a 5.5 barrel connector to all the wiring to be able to charge the 6v pack with out opening the box came out nice for the parts not being original . Lol trash more like come up.💯👍✌️😁
@thebug4046Ай бұрын
Nice that's great to know! And nope the original drive shafts are plastic in mostly all Traxxas stuff.
@s.o.sSavageАй бұрын
What a lovely surprise 👍
@thebug4046Ай бұрын
Definitely!
@speedgears1236Ай бұрын
Why don't I ever get free stuff LOL. That's great happy for you. They got a good home.
@thebug4046Ай бұрын
I had no idea that was going to happen lol but yes more projects for me 🤣
@aaroncavanaugh8241Ай бұрын
First here bro! Do I get MY cookie 🍪? 🤣 awesome looking t maxx
@thebug4046Ай бұрын
Hahaha I guess you win! 💯😂🍻
@ronnicolaisen5659Ай бұрын
Actually just noticed that's an original 3.3 head pretty neat. If ya hold em side by side with a new one n look down to the plug it's wayy different. Kinda wonder if it has the old type of connecting rod vs the new junk one.
@thebug4046Ай бұрын
Yes you are right! I noticed that as well. And sadly no it has the new rod in it so I'm assuming it was replaced at some point.
@ronnicolaisen5659Ай бұрын
Bummer owell could get lucky on finding an old style in a 2.5 sometime. I found a couple in lots that had no play in em so swapped one to a 3.3 n its holding up pretty well so far. Think it's in my sportmaxx
@David-069Ай бұрын
What’s the difference between the old 3.3 head and the new one
@thebug4046Ай бұрын
@@ronnicolaisen5659 they pop up now and then on eBay
@thebug4046Ай бұрын
@@David-069 they look the same from a glance but the old ones have slots that run through the head down where the glow plug is so more air can pass through.
@andrewgates9518Ай бұрын
Thanks for everything you do thebug ❤ your the doctor of nitro to me, so good looking that im looking on ebay to add one to my collection 😊
@thebug4046Ай бұрын
Thanks for the kind words! And definitely! Go for it the tmaxx are very simple trucks 💯 I don't know if you are on Facebook but im an admin in the Nitro RC enthusiasts group 😎
@rawrcАй бұрын
Sweet!....nice dumpster score!😂
@thebug4046Ай бұрын
Haha right?
@CrazyDadNitro-2.0Ай бұрын
Therapy time. Wooo. Hows it going Bug? Great video. Thank you for sharing. Nice new rigg😊
@thebug4046Ай бұрын
Hey man definitely! I'm not to bad how you been?
@CrazyDadNitro-2.0Ай бұрын
@@thebug4046 doing great brother. I no you are tired f hearing it but i will get you a new shirt out to you. Changed some stuff up. You will be the first with the new logo. Woo. Keep up the great content brother 👍👊🏻🔥👊🏻
@bryanbaker6767Ай бұрын
Okay bug..... hopefully you can do a video about the revo diff parts that fit the T-maxx because I really didn't think they would work just by looking at them or at least confirm for sure if they fit..... but the only thing that seems to break on my T-Maxx is the output shaft in the transmission where the PIN goes through the shaft that locks the gear to the shaft
@thebug4046Ай бұрын
I was talking to a few other people about it and apparently you can't do it but it's a whole lot of screwing around and I'm not going to do that and waste my time in the money on something that might not work. Apparently the brushless Emaxx diffs are better and stronger
@MaJestic1988Ай бұрын
That's awesome bug I wish I had friends that would just give me 4 traxxas rigs lol
@thebug4046Ай бұрын
It was definitely a surprise that's for sure!
@tonydetwiler2624Ай бұрын
oh nice
@thebug4046Ай бұрын
Thanks bub
@tonysands2837Ай бұрын
Awesome work bro I’m just purchasing a revo with the rb tm motor in it what are your thoughts about it do you think that motor would be pretty kick ass ? Or do you recommend the 3.3 traxxas motor? Have you ever tried this combo I know it was big in the day ?
@thebug4046Ай бұрын
Hey man that's awesome! And that is a kick ass engine definitely more power than the 3.3 💯
@tonysands2837Ай бұрын
Awesome bro can’t wait to see it I will definitely post a video soon as I get it just got the axial.28 version 1 brand new in the box today so hopefully I can break that in on the weekend keep up your awesome channel bro i love watching 🤜🇦🇺💯💥🔥
@KineRCАй бұрын
nice , cant beat FREEEEEE
@thebug4046Ай бұрын
Absolutely!
@chardison6026Ай бұрын
You mean e maxx? I don’t think e revo ring and pinion will fit
@thebug4046Ай бұрын
Someone was telling me that but I don't think they're telling my truth after I looked into it lol