My original call was diagnosing a bad headgasket

#fypシ #mechanic #mobile #work #love #letsgo #funny #laugh #everyone #travel

[@klwthe3rd]

That lady was super chill. She understood that something was wrong but kept her wits about her and parked the car quickly till she called Matthew. Those Buicks are NOT known for headgaskets so i wasn't surprised when it came back negative. I can't wait to see the followup video on her car.

[@irishjoe9195]

Should I ask Matt today?

[@42TY.Gaming]

"garbage dayyyy"​@@irishjoe9195

[@emmettturner9452]

Yeah, it’s the 3400 that’s known for that, not the 3800.

[@larryharry7221]

Lower intake gaskets

[@George-dy3pt]

​@@emmettturner9452that a 3800

[@SuperCubbyboy]

“I wouldn’t even call them safe” 🤣🤣

[@mailmanjoe]

That had me too. 😂

[@asaprulers226]

Atleast she knows some stuff about cars, seems like a nice girl

[@jonh901271]

Right! Half the battle is being curious enough to ask questions and learn.

[@MyRealDelusion]

She was smart to find somewhere to pull over immediately. Great video.

[@daydaybuckz]

“I wouldn’t call them safe”🤣🤣🤣 dude that took me out! Great video

[@D_M121]

found your videos last night. You are a good honest dude. The world needs more people like you.

[@madride858585]

Matt is the man. Best mobile mechanic in the country.

[@Chrissy212]

Make sure her cooling fans are operational change the thermostat and make sure there's no trapped air bubbles in the system

[@Chrissy212]

The 3.8 are very reliable transmissions are good even if head gasket is blown it's worth fixing in these head gaskets are rarer in these for going

[@dylanjk5946]

parts are cheap and so are used engines id just swap before i messed with headgaskets on a v6

[@jonathanfreedom1st]

Those have that famous plastic coolant elbow leak...and the Dorman metal replacement. I havent owned 1 since 2003 and it was a 1988 Oldsmobile eighty eight. Had a 3800. The original fuel injected 3.8 L non turbo naturally aspirated.

[@aaronrennaker1855]

Please keep up the good work on the videos. They are not only entertaining but also informative. Im building a mobile mechanic buisness myself and I love your content.

[@brittanylee4591]

Gosh i wish we had mobile mechanics in my area! I will say my mechanic has been good to me! Just got a tune up after intermittent flashing engine light, cylinder 1 misfire. Car seems to be running much better! But i noticed when i start it it has a chemical smell, no overheating, no visible leaks. My Dad said it is common smell on some cars at start. I will keep an eye on it though

[@clintonm1868]

that poor 3.8 series 3. i have a 2004 series 2 3.8. that thing is still going strong. just had to replace a radiator on mine due to over heating in the summer sitting in traffic, the dex coolant clogged up the radiator super super bad. swapped out the dex cool to conventional green coolant. shes running nice and cool now.

[@donrosscojoe5014]

Those 3.8 Buick engines have a very unique and unmistakable smell in the cooling system when they blow a head gasket, smells like a burnt turd. I could pop that cap, take one sniff and tell you if the thing was cooked or not

[@putoputo6261]

How the hell do people know how burn turd smell unless the was in the military and the shit duty like some of us did you wouldn’t know karen

[@larryharry7221]

Lower coolant elbow

[@GBKICKS1]

I think there’s a crack in the radiator she said ??? lol she found the issue

[@jonathanfreedom1st]

It's a GM 3800 notoriously Toyota style reliability. But when she said she put K seal in it my Jaw dropped. Ugggg. Nooooo. Fix the source of the issue and flush that entire system immediately. Any sealants block up engine passages and cylinder head coolant ports. That can haunt the engine forever...

[@Jumpoff13]

She’s so chill and cute af.. ❤️

[@williamclaflin7863]

Looks like a 3800 best gm engine

[@cactuscreekoutfitters]

She fine in a certain type of way

[@RussellBooth1977]

My dad was caught town with his 3.8 litre Buick L36 powered Holden VX Commodore when the radiator basically dropped its guts about a decade ago & since we live about 11 kilometres (a bit over 6 miles) out of town he was forced to drive it to one of the least desirable mechanics over here in Australia - Steve. He's a Parker whose workshop is now closed so now he's a mobile mechanic,him or his son sheared of the 6 millimetre screws which held the radiator fan onto the radiator & on a brand new radiator. That's probably why his workshop is closed now,his son took to one of the sway bar Link rods with a hammer & snapped it because it was kind of spot welded onto the Link rod ball joint. They didn't do a pink slip for my car for an annual registration inspection in 2013 so I took it somewhere else !

[@fightdhr8866]

Years ago Pontiac feiero slam hot then drop back to normal.Went to doing a head gasket and had a broke head bolt Some how..Replaced gasket and new bolts and sent it on down road.. ❤

[@michaelpollitt3]

Yeah them grey Nikes are pretty sick! I know another bad ass that has the same.

[@samloudermilk1381]

The radiator, those plastic elbows and lower intake gaskets are weak points on these 3.8 engines. They make problem solver intake gaskets with aluminum plate with rubber around the intake ports and they also make replacement aluminum elbows that dont crack as easy. The 3800 series 2 is a great engine, my wife ran them as a rural mail carrier for 7 years and in that time we've owned 5 buick lesabre's with the 3.8 and only 1 ever ran hot enough to damage the head gasket. GM used the 3800 in many differnt vehicles and platforms over the years. I dont know why they quit making it.

[@Wal-xq8bc]

I believe these engines are based on the Australian made Holden commodores. Which stop manufacturing few years ago. Due to incompetence of how gm ran Holden and dwindling market share. And also fuel prices. No wanted 6 cyclinder engine as a family car.

[@steverandolph3559]

Old school trick is the rev the cold engine while squeezing the upper radiator hose. Normally it will pressurize and get tight.

[@timroberts2261]

Love the videos bro but here’s the deal we need more part 2 s 😂

[@qrsimon]

We do

[@jamesgetz8945]

I'd like to be able to work and do stuff like this helping people out. Thanks for doing your job, I hope that the people you help understand nothing is free. In the past some people didn't want to pay a dime

[@DylanDubs-xe3ej]

Lower intake manifold gaskets and radiator and water pump 98% chance they bad lol. And oil pan gaskets and all engine mounts lol and the oil cooler can develope blockages and leak internal and external. Oil cooler hoses occasionally form large sediment blockages and stop flow.

[@docducttape9270]

Looks like shes about to pull a kick door. 😂

[@ianconley6673]

I dont make much money....body covered in tats 😂

[@richardnieft1629]

Never add that crap to coolant remind your customers to not add that stuff will cost them in the future and at times a head ache for mechanics

[@CrazyCat229]

I had a customer one time, the lady I worked with put the wrong oil filter on the customer's car. We called the lady and said don't drive the car we are sending a tow truck and the customer instead of pulling over literally romped on the engine while I was on the phone with her pretty sure it shot the filter off. I was like welp I guess that's one way to get a free engine. My point is good on her for pulling over when she saw the light. Btw the car that was blown up had 280k miles on it.

[@pingpong9656]

That is one scary test - if it turns YELLOW, you're going to have a very bad DAY

[@51-FS]

Still cheaper then a test with 2 lines....

[@orinmangar2333]

Matthew, also check the fans to make sure they come on, and are not intermittent.

[@fjb666]

Get a cheap IR thermometer, can check temp of hoses or rad and see if ect is off or by checking different sections of coolant you can tell if a thermostat is stuck closed or if there is a blockage in radiator or if wp is crapped out

[@LakelandOutdoors]

Longer videos please Matt 🙏🙏🙏

[@johnpope4464]

Good old presser tester would be helpful

[@binkywarren21]

Well the car next to her had a busted out window so yeah, probably not the safest place to park 😂

[@1958Studebaker]

Just replaced the elbows on my brother's 3800.

[@mfm6]

I have the same car, same engine. So easy to work on.

[@RimjobHimself]

You need to stop stopping your videos in the middle of explaining what was wrong. We need closure whenever we watch these videos. So make sure to explain exactly what was wrong and then say something like so thats all folks, before ending the video.

[@almarkowbender]

Make your own videos then

[@_doomzday]

The 3800 series 3 rarely ever has a head gasket failure. It’s the first and second series that had that problem

[@jessewynne8193]

Why is she using KSEAL if she didn’t have a blown head!? And if you have a blown head fix it! It takes about 3-8 hours.

[@ptaszek1983]

You are awesome

[@user-rr7je8iw3b]

Did you perform a pressure test on the coolant system? The lady described coolant leakege under vehicle.

[@user-jw5yj6tj8s]

On a 6.0 powerstroke all you have to do is crack the reservoir cap and keep going on a blown gasket 😂

[@asalvano]

Please post longer complete video's!

[@marrayricks5710]

Got a 2015 ford taurus get a warning light that says low engine oil pressure after an oil change plus the actuators are going out or is out can you help

[@JahJah021]

Can anyone Post The Link to that coolant/heard gasket check tool???

[@user-uc5by4dc1f]

A lot people woulda just drove it another 50 miles lol

[@cornerstation8657]

Will you help me out I need a good mechanic to work on 01 gmc yukon xl , I have bad lifters. Help please

[@mrdodgetunedup]

You should really do a leak down test. Sometimes a head gasket can blow between two cylinders and not a water jacket

[@limited50scla]

Hopefully the water pump took a crap

[@willwork2fish261]

I felt like the car was getting drug tested 😂

[@schemeteam2954]

U putting an astronaut? Wait until u find out that space aint even what they say it is. And earth ain't a ball, it is snd it isn't. The earth is a flat realm but the there is a field of magnetism that makes all the luminaries revolve around the earth.

[@WrenchS13]

Flat Earther troll alert!!!!

[@Up2_nogood]

That thumbnail had me thinkin you were working for the itty bitty cutie committee. Lookin good for 3 ft 5. 😂

[@JamesAnderson-fw5ew]

That k seal was a bad idea 😂

[@kikicoot]

Nice k24 swap bro, shit is mint.

[@JamesAnderson-fw5ew]

@@kikicoot thanks man, I appreciate it. Im abt to turbo it with really cheap ebay parts and it should make like 400 wheel. What do you drive?

[@kikicoot]

@@JamesAnderson-fw5ew Thats whats up, that thing is going to fly lol! I got a mostly stock 8th gen. Good ol k20z3. They're great motors, just have to rev them high all the time and the rev hang is bad too. Gotta get a flashpro soon lol. It had over 200k so far and still seems brand new. When it finally does decide to crap out on me I'm gonna do the k24/k20 swap.

[@JamesAnderson-fw5ew]

@@kikicoot thats awesome! Ive always wanted an fa5 but they are so hard to find in good condition and the prices have gone up. I would recommend you supercharge it. It costs a pretty penny but Ive heard they drive amazing.

[@ConejoMalo247]

MATHEW YOUR NOT TRIPPING I SWEAR THATS THE GIRL WITH THE LEXUS AND THE WARRANTY O RING !?

[@patrickferguson2720]

Where can i get that tester? I know you said Tik Tok but what’s it called?

[@cincyjohn69]

The problem is it’s a buick

[@chuyrodriguez8388]

Hey bro I have a leak I think from oil pan I put stop leak in it it only drops one drop every 2 hours do u even consider that a leak do I really need to get it fixed?

[@Dennis-gy7xr]

It’s rare for a 3800 to have a blown head gasket

[@emmettturner9452]

Yep. Pretty sure whoever said that was confusing it for the 3400.

[@Shade_91]

thats a cool use for a little fermenting air lock

[@indianmarshmello.]

I'm a rotary guy, and but I'm no mechanic I just kinda do stuff and I'm learning a lot, anyways, would that device you use to check for headgasket leak be effective for testing for inner coolant seal leak? I guess I could maybe just do a compression test but I would like to have that type of tool in the arsenal.

[@kelpking4484]

"I'm a rotary guy" what does that mean

[@indianmarshmello.]

@@kelpking4484 I drive rotary, I like rotary, I do rotary stuff. well, learning and doing my own things, figuring stuff out.

[@FRJ1982]

Is there a follow up video to this?

[@professionalamateurs45]

Lowkey looks like Shawn o malley

[@lukevandermark71]

DUKEEEEE BOOOOTTEEE!

[@dillonweaver2307]

Where are you located?

[@randyscrafts8575]

I don't understand why these strong independent women need a man's help. Is the nightmare of feminism and metoo over?

[@user-jw5yj6tj8s]

So here’s the deal 😂

[@RubinsRacing350]

No your good your good, but heres the deal, your not realy good right now😂

[@tedhicks5431]

Hey what do you think bout these kia motors that are being replaced under warranty?

[@jasonleatherwood2172]

If its a oil burner out of warranty dont buy it luckily my sisters had extreme oil consumption 1 quart at every gas fill up got warrantied at 69000 miles she bought it new so had 100k warranty

[@jasonleatherwood2172]

But if she bought it used would have had 60k mile warranty and cost about 8000$ to fix it

[@tedhicks5431]

@@jasonleatherwood2172 did they replace mtr

[@richsweeney1115]

Junkkkkk

[@tedhicks5431]

@@richsweeney1115 reason I ask know a man hot after one that has engine replaced

[@tanner882]

Earth is Flat 🫓

[@thealliedspy4170]

yeah

[@PakDesiinUsa]

Are you in maryland?

[@akuma-tactics1]

Bumble out the air ?

[@Thunderchunkyy_]

Who does your tattoos in tulsa?

[@kmacdagreat22]

Do you be in vegas

[@dilonfleckenator9005]

I need help withy car if your around lmk

[@josephfuller6229]

I personally use the thermostats that lock in the open position when they fail

[@michaelhuckabay739]

3.5 3.8 3.9 engines suck known head gasket blowers

[@JohnSmith-vc5jr]

Nope. 3.8 one of the best engines ever built. First year's of dexcool coolant reacted with gaskets. If they weren't replaced or coolant changed there were some problems. Just look up gm 3.8's. Or just look up grand nationals and learn how great these motors were. Unless you're talking about other car manufacturers 3.8's. Because ford and I think Chrysler also made 3.8l v6's

[@MiguelTinoco7]

First one

[@keemoify]

Wow thats great, to what adress do you want the diploma sent?

[@M.TTT.]

@@keemoify

[@jcismysavior9126]

Nice diagnosis

[@jay_bro8113]

You need to endnvideos better

[@danielcamarena6311]

Im hooked on your shorts and videos bro i been watching tĥem for the last couple hours im not a mechanic but i find them very interesting 🤔