My Regrets as an Automation ( PLC, DCS and SCADA) Engineer

Рет қаралды 78,973

IT and Automation Academy

3 жыл бұрын

My Regrets as an Automation ( PLC, DCS and SCADA) Engineer
~
INSTAGRAM: / noumanofficialvlogs

Пікірлер: 103

@awaisali440 3 жыл бұрын

Always feel motivated when i watched your videos. 👍

@dennissebranek543 3 жыл бұрын

I started in automation in 1978 working for Allen Bradley. The original PLC was primary, PLC2 was just comming out, and PLC3 had not yet been released. No HMI, recording programs on a cassett deck, some terminals for plc3 weighed in at close to 50 lbs. But the greatest thing that is a constant, that you can build and learn on, are the basic control concepts, and understanding how equipment works, and what you can do to make it better. Get experience in multiple industries. Food, material handling, chemical, steel, etc. Cross industry experience really helps.

@aravindanselvaraj875 2 жыл бұрын

@Robot-PLCProgramming Ай бұрын

Very good advice for those who want to become an automation engineer. I am an automation engineer and working with plc, scads. Robot and more… Practice is the key for success.

@EliteAutomation 3 жыл бұрын

I actually had the opposite approach. I didn't care about my grades but more about what I was learning. I struggle to learn while taking notes. So I didn't take notes but the notes were needed to study for the test.

@yahavseligman4855 3 жыл бұрын

Same here, with the difference that Im still a student (haven't entered yet a university)

@9mycool 2 жыл бұрын

And how it went ? Did you get good jop or something?

@Letsgoback2thefuture Жыл бұрын

Hello my name is David I work as a technical recruiter for Flextronics. We have job Vacancies for Automation technicians at Flextronics, Austin TEXAS. send a dm if you have 4years+ experience in the field. Military personnel with PLC technical training are encouraged to apply. Associate Degree in related field is a plus. Staffing for over 40 positions - both contract and full time Relocation assistance available for full time positions.

@josefmokry9976 3 жыл бұрын

It is always easy to find people who can program and service PLC. It is hard to find people who can make it from scratch. Select best combination of HW, design automatic cycle from blank, make it safe and user friendly and then write the code without mess and readable.

@kevin00861 2 жыл бұрын

Thank you so much dear Engineer, You speech inspired me a lot Please keep posting more videos

@motema_mpembe 3 жыл бұрын

This is a great and timely reminder. Keep up the good work.

@ojwanggeoffrey2770 3 жыл бұрын

Sura ya mkenya sio?

@josepheccles9341 3 жыл бұрын

I only went to a 2 year school and got an associates degree. For most of my career I have been an industrial maintenance technician. But had always had automation as a hobby. I now design, build, and program control systems for machinery in a Nissan manufacturing plant in Tennessee. I do not do so much of the HMI, but mainly the ladder logic side of the equation. Often PLC code written by guys who have more education than practical experience are much more hard to troubleshoot.

@ricmen1890 3 жыл бұрын

What school did you go to and what program did you take up

@josepheccles9341 3 жыл бұрын

@@ricmen1890 I went to ITT Technical Institute. I got an Associates In Applied Science degree in Electronic Engineering Technology. But I was an electronics hobbyist and an Industrial Maintenance Technician. For a few years before attending school. I was 29 years ols when I went back to school.

@ricmen1890 3 жыл бұрын

@@josepheccles9341 thanks. That gives me perspective

@aj6365 2 жыл бұрын

@@josepheccles9341 that's funny, I was 29 when went back to school for associate in Electronics and now 7 years later I make 3 times what I used to make . Now I'm thinking do I go for engineering or just cruise where I am

@Letsgoback2thefuture Жыл бұрын

@hdr22611 3 жыл бұрын

Good platform for learning of everyone

@mokhtarawwad6291 3 жыл бұрын

thanks for the video, bro first time to watch you certainly , will not be the last video from you

@ITandAutomationAcademy 3 жыл бұрын

Welcome bro, stay blessed

@ahmadasaadaboaamer1329 2 жыл бұрын

thank you so mush you are great

@marbenaloc8826 3 жыл бұрын

Great Content Bro

@ChilibombActual 3 жыл бұрын

This is great advice. I have a good GPA but sometimes I feel like am falling behind sometimes and this is helping me focus on the practical skills needed for a good job!

@dwsan1tx 3 жыл бұрын

Please, it’s called experience and when you get some, you’ll reflect and realize there’s always room for improvement. Field experience with panels both new and existing help to develop practical approach to applications.

@hamzasaleem2550 2 жыл бұрын

Agree with you to some extent and also disagree. My experience says thats its more about going out of the box which is rather difficult for every student. But i might say that i am rather lucky when it comes to making plans and constantly adjusting. Most of students doesnt make plan on the first place and dont want to inquire. A curious mind leads you very far in life ❤

@Brayo9 2 жыл бұрын

Experience and regret go hand in hand i suppose......maybe this is meant for us newbies so we won't have as much to regret about

@mrwindsor67 3 жыл бұрын

I'm a maintenance engineer (mechanical/electrical) with a degree in electronic engineering. How can I transition into Automation engineering?

@sabbirsabbir3937 3 жыл бұрын

can you please tell something more about what are domains available for an BE student ? and which subjects one should focus more related to their domain?

@clemensmbao 3 жыл бұрын

Thank you

@shafiqssenoni7467 3 жыл бұрын

Salamalykum thanx for your time I really apriciate Am requesting if there is any hmi simulator

@danielk6295 3 жыл бұрын

you regret learning control theory and kalman filters, when the real money now is where control theory meets M/L => reinforcement learning

@ImYourAverageJoe 3 жыл бұрын

Employers still look at GPA, it is not the only factor but it is one of the factors.

@industrialautomationmechat8130 3 жыл бұрын

I am an automation engineer. I want to learn PLC and SCADA programming in brief.

@yahyamalik3206 3 жыл бұрын

Good regrets

@VIP-kc7zg 3 жыл бұрын

Sir can u suggest few courses which are available on coursera Or any similar sites for automation engineer which are beneficial for them to gain more knowledge.

@syufrijal 3 жыл бұрын

Nice motivation, My regrets as an Automation Engineer

@leozhou65 3 жыл бұрын

？

@kashinathpal8915 3 жыл бұрын

Can you please tell what are the things one must know as a fresher that could be asked in an automation job interview?? It would be very helpful if you make a separate video on that!!..

@ab-fi9um 3 жыл бұрын

Write a program from scratch

@gilbertdevera3339 2 жыл бұрын

Hi, Sir May, I know what is the Best Programming language in PLC because I Using the SCL

@RatedYWalkThrough 3 жыл бұрын

thts good

@kolayskyboy2674 2 жыл бұрын

For only interested in Programming(Software) but not in hardware, I pursue my career as IT programmer.

@kahwaichoong1467 2 жыл бұрын

Feel interested in automations as a production executive, dont have automation engineering but with food science background , is it able to join automation career?

@mandeepbhakare7113 3 жыл бұрын

Connecting the dots

@fahadahmed480 3 жыл бұрын

Dude, just found out your channel 3-4 days ago, love the content, Thanks for making such information available on this platform, (Just a request, can you please don't add those sound effects in the background? Those makes the content "childish" and just doesn't feels good)

@familei3349 3 жыл бұрын

Nice green screen!

@ayomidewilfred1864 2 жыл бұрын

Are you making a good gigs in Automation field

@penchalarao1804 3 жыл бұрын

Can u help me sir i will learn PLC and automation

@DilshadAnsari-xu5uz 3 жыл бұрын

I am become control engineer I am in 4 sems Which subject is more prefere knowledge like. Digital electronic,analog electronic, signal and system, control system, measurement, sensor and instrument.

@Longmanrus 3 жыл бұрын

you need to know all this to be a good engineer. And a plus for this robots, cnc and drives.

@marclouembet7383 3 жыл бұрын

Thank you so much for the priceless advice. However, I would like to get in contact with you, would it be possible. I am aware of your tight schedule, hence I would perfectly understand a non positive reply and will still stay tuned.

@ITandAutomationAcademy 3 жыл бұрын

Marc u r welcome to connect on Linkedin

@josepheccles9341 3 жыл бұрын

Sure, you can contact me. Sorry to take so long to reply. I don't look here so often. You can Email me at joestechsvs@yahoo.com Let me know what you are interested in talking about.

@abhiram721 3 жыл бұрын

Feels like advertisement

@anilmishra5947 3 жыл бұрын

GPA has nothing to do with the job except for getting a job in the first place.

@DSNCB919 2 жыл бұрын

Yup after 5 years work exp. Nobody cares

@9mycool 2 жыл бұрын

@@DSNCB919 after 5 years you should have your own compane

@Marenco.98 3 жыл бұрын

Adds are really an issue

@Scheme_Match Жыл бұрын

Sir can i talk to you. Please

@aravindanselvaraj875 2 жыл бұрын

Iam scada enginner. I need job in abroad.

@wajirabandara9368 3 жыл бұрын

Is there a chance to join with automobile industry as an automation engineer?.

@muirisoconnor7749 3 жыл бұрын

yes, of course.

@ab-fi9um 3 жыл бұрын

1st rules would be to have the hands dirty = field , field , field And how old are you by the way ? You look like 30 ? You still have things to learn and test !

@ITandAutomationAcademy 3 жыл бұрын

Yes i am

@trippermostafiz 3 жыл бұрын

I am an Automation Engineer & From BANGLADESH. Nice to meet you. Where are you from?