Perfect attitude. Gives the car a better story line man, pushed to breaking point then came back from the dead. Poetic
@S3Ranj8 ай бұрын
I like that, and I couldn't agree more!
@Micksterg438 ай бұрын
Sorry to hear the bad news, hope you get your great S3 up and running soon. Don't give up on the S3 you've created something special!
@S3Ranj8 ай бұрын
Thank you, bro. I won't give up at all! Seeing comments like this are genuinely appreciated.
@DailyDrivenS38 ай бұрын
My motor blew up running 540bhp on a MRC tune and the second engine I purchased wasnt running great due to being poorly built Ares Tuning has built my current engine. Nathan is very knowledgeable My S3 hasn’t missed a beat since being built by him Highly recommend 👌🏾
@S3Ranj8 ай бұрын
I'll be touching base with Nathan next week.
@chicalope8 ай бұрын
Absolutely gutted for you Ranj, hopefully you get to where you want again soon.
@S3Ranj8 ай бұрын
Just got to have faith. Thank you.
@mattvermilyea8 ай бұрын
Been down this road twice, but in my B8 S4. Super gutted so I know what you’re going through after putting so much time and effort into it. After some thought and research as I wanted a modified car again I decided on the RS3 as that platform is way more reliable. Fingers crossed, but I’ve been stage 2 for 2 years now with just normal maintenance being my biggest expense. Of course I always want more but I know that as soon as you go stsge 3 in anything you’re just rolling the dice unless you build the motor. Best of luck with your future projects!
@S3Ranj8 ай бұрын
Thank you, mate. I agree, it's like roulette.
@MH-cc5fw7 ай бұрын
Positive thinking! Rebuild series, document it and it will help people! That monster you created needs to be fixed 💪
@slaaayx7 ай бұрын
Your reaction is awesome man. You took it like a champ.
@S3Ranj7 ай бұрын
💪🏽
@fireitupf35488 ай бұрын
Chin up dude big decision now spend big for 600+ or new car next year good luck!
@montage123338 ай бұрын
I can’t believe that your tuner didn’t reccomend opening up the piston ring gaps if wanting to run race fuel / higher cylinder pressures on a stage 3 it sounds to me like the piston rings have pinched together due to getting to hot and not having enough clearance and caused the skirts to break apart on the piston
@arronlowley56598 ай бұрын
unfortunately this is what happens at stage 3 on stock block, i assume you were 2 bar of boost or over?
@BerkanProductions8 ай бұрын
I picked up my S3 Tuesday i blew my engine aswell Connecting Rod Blew out of the engine. Good luck with replacing the engine Will be a sick Project for sure !
@S3Ranj8 ай бұрын
Let's hope! I'm sorry to hear that about yours.
@davidcanwell8 ай бұрын
This is everyone’s worst nightmare. Chin up bud! Onwards and upwards!
@smangamthethwa47328 ай бұрын
Don’t worry Brother you will be fine 🤝🏾
@Jisback-hh5er8 ай бұрын
Bro you need to get it fully forged same thing is going to happen again personally i would have gone for a rs3 better engine..
@Jack-ee6dl6 ай бұрын
Was the block still on stock internals? I’ve always wanted to build an EA888 to stage 3 and I finally put a deposit on an s3 but this has put me off, unless you was on stock internals still
@S3Ranj6 ай бұрын
It was. Check out my latest video, just dropped it. Very informative!
@Beardchanics8 ай бұрын
Sorry to hear mate, fighting with mine too but nothing that bad! Nathan and an Unicorn development tune will get you sorted =) Way too much torque on your last tune. Anything over 600Nm without an built engine you're playing with fire. Unicorn development limit the torque based on state of engine. They limited my to 550BHP and 600Nm.
@S3Ranj8 ай бұрын
I've been keeping up with your videos and saw your visit to Nathan's on the train. I'm definitely going to touch base with him next week. Tbh, this is a big learning curve for me. I can now share it too with everyone else.
@Beardchanics7 ай бұрын
@@S3Ranj Defo worth the trip. He always blow my mind with the knowledge he has and often has quite mad stories from dodgy builder and people not respecting their car =) Same here. I think pass Stage 2 it's a different game that requires more patience and unfortunately more cash! We'll get there, we'll be poor but our S3 will run stable and proud 😅
@S3Ranj7 ай бұрын
@Beardchanics Haha, it's like they say you can't race a house, but you can race a fully built S3. Hopefully, we can get them together one day. I'll definitely be seeing Nathan in the near future.
@Beardchanics7 ай бұрын
@@S3Ranj Yeah would be great to get them together once. What region are you in? I'm in Essex.
@boostedarmy10768 ай бұрын
Like the positivity brother.....you'll be back out bud....I'm stage 3 also....440whp....I'm hoping this doesn't happen anytime 😢😢....best of luck...i just subscribed 💪💪💪
@S3Ranj8 ай бұрын
Thanks, bro. Best of luck! I hope it doesn't happen to you, or anyone else, either.
@Nb_Racing_01138 ай бұрын
Mate just watched this i had this happen to me at low speeds i was at the ring did a lap then went to spa to watch f1 and my engine went in Europe so got it towed to nathan and now it’s forged and ported head been a year runs sweet👍 nathan is the man for the job
@TheCinderellaman108 ай бұрын
Ares Tuning ?
@Nb_Racing_01138 ай бұрын
@@TheCinderellaman10yes i run over 500 reliable as he said in the video you never really get over that “it might do it again fear” but i give my car a beating for a year and still runs good👌
@S3Ranj8 ай бұрын
@@Nb_Racing_0113 I love that! Congrats on your comeback.
@S3Ranj8 ай бұрын
Thank you!
@VWR78 ай бұрын
How much for new engine ?
@S3Ranj8 ай бұрын
Can range..I think 4k max.
@samiromeo69918 ай бұрын
Same happend to my s3 now I'm sourcing s new engine
@S3Ranj8 ай бұрын
Gutted for you. Hope you get it fixed and come back, too.
@samiromeo69914 ай бұрын
@S3Ranj I just did 2 days ago I have 2018 golf r engine now
@honda.spares.man18 ай бұрын
Too much ignition timing and cylinder pressures.
@emma-mun8 ай бұрын
mine got rod knock, rebuild starts next week
@S3Ranj8 ай бұрын
Good luck with it, and hope to see it back soon.
@georgeburnett83774 ай бұрын
Mine blew up today fully stock dunno why but loads of oil everywhere and rolled to stop 😢
@S3Ranj4 ай бұрын
@@georgeburnett8377 let's hope it isn't a big issue!
@georgeburnett83774 ай бұрын
@@S3Ranj the blocks got hole still tryna to work out why it’s fully stock wasn’t even driven the car fast im thinking bad batch of fuel
@S3Ranj4 ай бұрын
@@georgeburnett8377 Wth! Nevertheless, maybe it's opportunity to do something great with the car.
@Ovakill225 ай бұрын
What wheels bruv?
@kaleem988 ай бұрын
Bummer bro but be positive. I would personally just resource another engine and cut back the power, then save up for better internals
@S3Ranj8 ай бұрын
One of my options for sure! Thank you.
@alishansp8 ай бұрын
Surfer will be back strong ❤❤❤
@S3Ranj8 ай бұрын
Too right!
@kashv25008 ай бұрын
Defo forge it or next engine and forward invoice to Bobby 😂
@S3Ranj8 ай бұрын
😂😂 I’m sure he’ll see this.
@tejzino15988 ай бұрын
Engine rebuild and aim for 600 bhp 💥
@paulfeatherstone70958 ай бұрын
Hello you will get it sorted 👍
@S3Ranj8 ай бұрын
@@paulfeatherstone7095 Thank you!
@Hassanr338 ай бұрын
Stick an rs3 engine in bro!
@S3Ranj8 ай бұрын
Ha, who knows. Doubtful at this point, but seriously, who knows.
@tejzino15988 ай бұрын
Devil devil developments they specialise in the e888