Пікірлер
@alishansp 21 минут бұрын
thanks for fixing mine ❤
@BMXESCAZU 4 сағат бұрын
it fit golf r?
@S3Ranj 4 сағат бұрын
@@BMXESCAZU Will do, yeah.
@krissheriff8776 5 сағат бұрын
That looks crazy fast. Making me very jealous
@S3Ranj 4 сағат бұрын
Haha, no don't be. I bet your car is fast, too!
@krissheriff8776 4 сағат бұрын
@S3Ranj it's only stage 1 mate. Been bored of it for years just not sure what route I want to take yet
@ShalomBrother 10 сағат бұрын
What a weapon of a car, nowhere near as loud as the other one but it’s got a lot nicer tone to it on the scorpion. I don’t think I could live with all the pops and bangs though.
@S3Ranj 9 сағат бұрын
@@ShalomBrother Ha, thanks! Agreed re the sound. The pops and bangs are very limited. Out of 80% of the footage, you only heard a couple of them, which I included in the video. I can’t imagine what they would look like mapped in!
@ShalomBrother 10 сағат бұрын
Do you not need the oil to hit 100°c to get rid of moisture?
@S3Ranj 9 сағат бұрын
@@ShalomBrother I've been advised, by those who built by engine is, once it gets to around 75c, it's fine. The actual engine temps will be around 15c higher, so it's fine.
@strko9990 21 сағат бұрын
car sounds good, did u get better clutch pack fitted to handle the torque ?
@S3Ranj 21 сағат бұрын
@@strko9990 good question. I didn’t, I’ll see how I get on, and hopefully I’ll get an update one, if needed. I should have.
@AshtonLawrence-k7n 21 сағат бұрын
Is it the exhaust system causing the flames or the map?
@S3Ranj 21 сағат бұрын
@@AshtonLawrence-k7n Both, IMO. Before, the flames, same ECU map. Now, flames with the new exhaust. On the Dyno run, we did notice that it wanted to, but the X Force system, wasn’t allowing.
@AshtonLawrence-k7n 21 сағат бұрын
@ Very interesting awesome car by the way 👍🏼
@adamgilboy7654 21 сағат бұрын
love the sound of it
@S3Ranj 21 сағат бұрын
@@adamgilboy7654 🙌🏾🙌🏾
@liamting 21 сағат бұрын
The rs3 brakes, are they a straight swap onto the s3 pal?
@S3Ranj 20 сағат бұрын
Not onto a S3 340mm disc. But, they are with the right disc, you can use the RSQ3, or TTRS disc. I’ve heard weirdly you can’t use the RS3 one. I’d suggest, the VBT 2psc floating disc, it’s plug and play with that disc set up. Straight swap.
@GiuseppeBusso7 22 сағат бұрын
What a video mate... Thanks
@S3Ranj 20 сағат бұрын
🙌🏾🙌🏾
@AndyxPandy 23 сағат бұрын
That looks seriously rapid
@S3Ranj 23 сағат бұрын
@@AndyxPandy it feel it for sure!
@turbolifer7548 23 сағат бұрын
What power is this running mate?
@S3Ranj 23 сағат бұрын
@@turbolifer7548 I’m going to find out next week, but around 610-620, I think.
@turbolifer7548 22 сағат бұрын
@ wow absolute weapon sounds insane!
@S3Ranj 22 сағат бұрын
@ 🙌🏾🙌🏾
@sarfrazcarrim9355 Күн бұрын
Person opinion... Not a fan of pops and bang map. Keep it authentic
@S3Ranj Күн бұрын
@@sarfrazcarrim9355 I’m the same. They’ve not been mapped in, they’re just the stock ones amplified. You’ll know the stock S3 has them. As you begin to alter the exhaust I.e. res delete, those pops become louder, and can result in bangs. Just a result of better flow. I will say, I don’t mind occasional let off. But, it’s not there all the time, only when the meth is introduced really.
@micmac1985 Күн бұрын
If you had to pick a system for sound only which one would you pick?
@S3Ranj Күн бұрын
@@micmac1985 Hmm..X-Force all day, unless, you’re going over 550bhp, then this. The valves on the X-Force system, are brilliant. Unbelievably good.
@cjlewis5455 Күн бұрын
Sounds awesome 👌🏼 what camera & mic are you using on the back for such a clear exhaust sound ? .. ( also Inside mic ?)
@S3Ranj Күн бұрын
@@cjlewis5455 It’s the one I mentioned at the start, the DJI Osmo Creator Pack.
@cjlewis5455 Күн бұрын
@S3Ranj nice one mate thanks I'll need to check that out 👌🏼🙏💯
@S3Ranj Күн бұрын
@ No problem. It’s a great piece of kit.
@cjlewis5455 Күн бұрын
@@S3Ranj Excellent 💯👌🏼🙏
@zoraver95 Күн бұрын
SENGH! Congratulations on your build 🎉 You must be working hard because that is cashhhhh 💰
@S3Ranj Күн бұрын
Working as hard as I can! Thank you, bro! I hope we all win this year
@AS-xz2zy Күн бұрын
Ranj blur your speedo out bro
@S3Ranj Күн бұрын
Thanks for looking out, bro.
@autovek Күн бұрын
Do u have a link for this light
@AndyBreare 4 күн бұрын
Hi. Great video and great product. Personally, I would have liked more detail about the installation process, which wires go where etc. I understand this is very tough to film on your own so maybe it would be a good idea to get someone to help with the filming so you can do that. You are a confident presenter and your enthusiasm and personal opinions about the product are good but before you start filming, I think you need to ask yourself two really important questions 1. Who is going to watch this and 2, what do they want to get from it. I am a bog standard viewer who wants to install this screen in my car. Basically, I want to know how to do it and any tips that you may have to help me in order to save me the hassle, cost and swearing of making the mistakes myself. So, for example, instead of using the speeded up video technique, I would have liked you to say, “there’s a packet of wires here which looks pretty scary but don’t be frightened, here’s a rough idea of what each one does and where it goes etc”. That way, you are enabling the viewer to achieve something out of their comfort zone, giving them confidence with sharing some of the mistakes you have made. They will mentally thank you for that, subscribe and share your video. Whatever videos you make in the future, always think about your viewer and put them first. For example, for me, the one thing I take away from this video is that you lost two screws down the dash board when fitting the holder and, knowing that, I can now take measures to ensure that doesn’t happen during my installation so, thank you. That is the reason I have subscribed. I hope you don’t mind my feedback but I am just being honest and it is just my opinion. I wish you all the best with your car projects and thanks for taking the time and effort to make these videos. All the best for 2025 and keep up the good work!
@S3Ranj 2 күн бұрын
I appreciate that very comprehensive feedback, Andy. I'll be taking what you have said on board. I feel the exact same as you do, when I'm stuck, or when it's something new, I also revert to KZbin in hope to find the answer, but an answer which is clear and goes into the detail which is often missed on instruction manuals. I actually try to film everything I do. At first, I was like, oh people want to see the highlights, but in fact, with most of my videos, especially the intercooler install I did, that was a very intricate install process, and I couldn't find anyone on KZbin who told you things you could do only know upon doing it yourself. Going forward, I'll be sure, for my install videos, to make them more detailed, as most don't know every thing, and that's what you need when watching a DIY, or tutorial type video. Happy New Year, and thank you for subscribing. I'm moving onto something new (car wise), and I hope you stick around!
@LeeHughes-m8o 6 күн бұрын
I would go for 430d m sport my self RWD all day ...
@sebelkes485 6 күн бұрын
How much is it for a full forged engine rebuild on a ea888 gen 3 engine from these guys
@S3Ranj 6 күн бұрын
Check out my latest video, which is about the costs.
@neilshaw3743 7 күн бұрын
Mega video watched every second .
@alishansp 7 күн бұрын
❤❤
@bobrose7900 8 күн бұрын
Looking good, well done!
@troyeberhard2086 8 күн бұрын
Recently got this done plus a Revo Stage 1 TCU/ECU done. What a difference
@S3Ranj 8 күн бұрын
@@troyeberhard2086 I can imagine. Enjoy bro!
@BrianCush 8 күн бұрын
Recently bought a 2022 s3, what are the maintenance costs, like replacement parts, tyres services? Compared to an A3?
@S3Ranj 8 күн бұрын
@@BrianCush tyres, no difference. Minor services, no difference. Major service, can’t imagine there being a difference. Replacement parts, depends.
@fromural 9 күн бұрын
Далеко без головной боли не уедешь 😅
@Jisback-hh5er 10 күн бұрын
Lol should have just got rs3
@S3Ranj 9 күн бұрын
@Jisback-hh5er Why don't you buy me one?
@user-ug8wx5er1w 10 күн бұрын
Sounds broken
@jayburden5814 10 күн бұрын
You need a new phone holder mate
@S3Ranj 10 күн бұрын
LOL I genuinely can’t believe people are oblivious to the fact it’s a pop socket 😂😂😂
@phiIip488 10 күн бұрын
Not a single speed limit was broken
@S3Ranj 10 күн бұрын
@phiIip488 it factually hasn’t, that’s the best thing.
@alishansp 11 күн бұрын
🎉🎉
@bloodedge8801 12 күн бұрын
Do you have the CIC or the CCC Version of the car
@gazza8596 12 күн бұрын
How has it been after the big build mate ? Been a wild series that like after all that work then engine shay the bed I really felt for you like had a similar thing happen to me but just not as much money was spent on my build 😅 still hurt like a bitch tho , been looking forward to your videos after the wizard stripped it and forged it with some old school spice adding in porting and polishing must be a rocket ship now
@S3Ranj 10 күн бұрын
@@gazza8596 it’s great man! Can’t wait to get more content out, to showcase all of this. Haha, it’s okay, it is what it is. I’m happy with it, and just hope it stays that way.
@SinaloSiqalo-i5p 22 күн бұрын
Can you do flybys medium and full throttle acceleration
@SinaloSiqalo-i5p 22 күн бұрын
Can you do fly bys and medium and full acceleration
@dannyog_1 24 күн бұрын
Gloss ❤
@georgestuparu328 25 күн бұрын
Hi man, what if instead of that protective plastic I have an assistant camera for the high beam?
@marioviola5693 25 күн бұрын
Great Videos. What oil are you running.
@S3Ranj 25 күн бұрын
@@marioviola5693 millers nano tech
@NickStieg 27 күн бұрын
how’s droning like?
@NMSSBOOK Ай бұрын
Matte Nardo
@mrtraveller2020 Ай бұрын
When the issue occurred.. out of interest were you flooring the car at the time for a long time...or did it just happen whilst driving normally??
@S3Ranj Ай бұрын
@@mrtraveller2020 it was being floored, not for long. It wasn’t me driving it, so it could have been that 😂. But, it was going to happen.
@mrtraveller2020 Ай бұрын
Great video.
@S3Ranj Ай бұрын
@@mrtraveller2020 thank you!
@alishansp Ай бұрын
super informative! 😅
@S3Ranj Ай бұрын
@@alishansp thank you ❤️
@satoshiblack1046 Ай бұрын
Basically hot hatches are for grown up boys, 435D is for men with nothing to prove