My take on carpet wands!!! Which one should you buy!!!!

[@darrennicholas860]

I agree we used that for 25 years and made great money sometimes going back to basics does the job👍

[@matta.5363]

You're smart enough to be successful. That's what counts. Thanks for this video!

[@carpetcleaningprofessor]

Thank you

[@BrownsProfessionalCarpetCare]

Awesome video!!!! I'm purchasing my Devastator wand this year 🔥🔥👍🏾

[@carpetcleaningprofessor]

Thank you so much brother!!! I'm sure you'll be very happy with the devastator

[@213BRANDONP]

Im rocking the dang v4 its a masterpiece

[@carpetcleaningprofessor]

Cool I'm sure it works great

[@jmyjam9038]

This vid came up on recommendation and glad it did cause, I never laughed so hard, only because I believe we started at the same time, and started out the same way meaning the ninja with a 100 psi pump. Used to load that thing in the back of my Buick regal. This was way before cell phones and GPS. I still have the original wand I still use it or make my techs used it when it comes to redo as punishment 😅 . Too bad I can't post a pic of the wand as it's hanging on the wall.

[@cowboybob993]

Thanks for the video. I have that wand with the black handle and need to get the glide. What model is it as I don’t see anything on the wand. Has a stainless glide now.

[@TrendyBromando]

I love the evolution wand im scared to try anything else especially since evolution is 800 brand new id hate to be unhappy with a $1700 wand

[@keithchapman1477]

Question.... ever tested fhe fluid it pushes out per min on steam/HWE. Was wondering as i cant find a answer.... just the average you guys use.

[@darketernity0475]

Are the evolution and the Trident/sharpshooter wands from us products basically the same? I'm fixing up an old mytee for personal use and while I've wanted one of the evolution wands the Trident value wand I feel makes much more sense for the usage and price

[@carpetcleaningprofessor]

Three are some performance differences But nothing significant enough for you to notice I like the evolution due to all the product support. You can get a green glide and any flavor.

[@darketernity0475]

@@carpetcleaningprofessor thank you for the reply they seemed similar in design. I'll go ahead with the Trident value wand

[@BrownsProfessionalCarpetCare]

I'm an 1.5 fan as well

[@carpetcleaningprofessor]

Stick with it you won't regret it

[@RonRivet]

What is the best wand you would recommend for low pressure portys?

[@carpetcleaningprofessor]

I would recommend a aw29 or the evolution

[@RonRivet]

@@carpetcleaningprofessor ok thanks. I already have an aw29 and I don't mind it but I may look into the Evolution wand if it's lighter.

[@leroygillis985]

trying to get into the biz, i have an edic galaxy. Will the evolution wand work with that or what wand would you recommend

[@carpetcleaningprofessor]

The evolution will work with just about any machine It comes with three different jet sizes The one thing I really recommend is buying a green glide for it It makes a world of difference

[@BrownsProfessionalCarpetCare]

I'm still cleaning with what I started with 20 years ago lol😂😂🤦🏾‍♂️ by choice though.

[@carpetcleaningprofessor]

Because you're smarter than me!!! All the money I've spent on tools. They all suck up the same dollars bro

[@KennyCosway]

lol it's time to install new jets :)

[@zafferhead]

What would be the best value, quality wand to match up with my 300PSI pump and Air Hog setup?

[@carpetcleaningprofessor]

The best value hands down is the w-29 Westpac after that would be the evolution wand either way I would get a green glide you won't regret it 😉

[@zafferhead]

@@carpetcleaningprofessor Thanks. We have an W-29 and I’m thinking about upgrading. Ease of use and effectiveness are my main factors... I don’t want to spend a fortune though. What would be my best option other than the Evolution with a view window... or without?

[@carpetcleaningprofessor]

So if you require a site window you're going to have to go with the TMF or devastator which are both very high cost ones

[@antoniobonner8048]

Can a TMF wand be connected to a 10 gallon Mytee Extractor without causing any problems to the wand or the extractor?

[@carpetcleaningprofessor]

It won't hurt the extractor. It might be a little too much wand for the extractor but it won't hurt it

[@antoniobonner8048]

@@carpetcleaningprofessor Ok so if it may be to much wand for the extractor what effects may it cause to the extractor if it's to powerful for it?

[@carpetcleaningprofessor]

No the extractor's not powerful enough for the wand. The wand most likely has too high a flow And you're most likely better off sticking with the wand that came with the machine

[@antoniobonner8048]

@@carpetcleaningprofessor Thanks and that sucks 😑 I wish the Mytee wands was like the TMF wands

[@carpetcleaningprofessor]

Well swivels aren't all their cracked out to be once you get one you find out the novelty wears off super fast that's fine I don't run It makes my elbow hurt

[@GTRwilson]

Can you add a teflon glide to a wand that doesnt have one? or are they only applicable to wands that came out with one? If it glides so much better, is the wand still achieving the same amount of vacuum 'lock' on the carpet?

[@carpetcleaningprofessor]

Yes you can add a guide to just about any wand. even wands that come with a glide can have the glide swapped out with greenlee glide. A properly designed glide will achieve better performance then the slot on the wand. Often times people say that the wand does not lack as hard that's because the Teflon is there to reduce friction making the wand easier to move after it's locked to the carpet

[@lavonnescott8114]

@@carpetcleaningprofessor what is a greenlee glide?

[@carpetcleaningprofessor]

In this video I explain what a green glide is pretty well kzbin.info/www/bejne/m5nYnHpta5dnnpo

[@mserrato587]

What do you think about the Mytee Bentley? Thank you

[@carpetcleaningprofessor]

It's a pretty decent wand

[@mserrato587]

@@carpetcleaningprofessor do you recommend it? Thank you

[@carpetcleaningprofessor]

I think it's a decent wand for its price point. It's not as nice as the devastator or the dang. But it is darn good for the price.

[@mserrato587]

@@carpetcleaningprofessor Thank you very much!

[@carpetcleaningprofessor]

Anytime

[@clevelandchan]

my wand hold 5000 psi and it has a pressure washer handle and the jet sit in a case so you dont see the water when it comes out

[@KennyCosway]

5000? wow :)

[@ahmedalnumairi3498]

Can you recommend a wand under 2000 ?

[@carpetcleaningprofessor]

I can sure try. Here's the biggest problem I haven't tried the new TMF attempt. The devastator is very very nice!!! Tony's wand isn't far off. I have a feeling the TMF wand is the best value if you're looking into the high-end market

[@RetroGore91]

Devastator is absolutely amazing

[@mlhm5]

Agree with you - T-Rex or T-Rex, Jr.

[@carpetcleaningprofessor]

I really like them both but I only currently own a T-Rex Junior

[@ReinSman100]

What is the name of the wand that you recommend? I thought you said magic wand.

[@carpetcleaningprofessor]

It's the double bend classic with a Teflon glide which is sold separately www.magicwandcompany.com/product/classic-double-bend-12-2-jet-wand/

[@carpetcleaningprofessor]

I recommend calling them to get the right glide

[@ReinSman100]

@@carpetcleaningprofessorDo you think it has a nice valve? My wife is not very strong. She needs a light valve.

[@carpetcleaningprofessor]

@@ReinSman100 yeah in comparison to titanium it's a very good only about a pound heavier and with the right glide in those over the carpet really good you don't even notice the weight

[@zafferhead]

@@carpetcleaningprofessor is that wand basically an AW-29?

[@KennyCosway]

Japanese LOL If they actually made wands in Japan they would definitely way out perform anything made in USA - Japanese and Vietnamese ain't the same.

[@nif15189]

Wow... this is the most subjective and useless video I've ever seen. Question 1. How many jets does each wand have? 2. Hiw high off the carpet are the jets? 3. How wide is each wand opening? 4. How much does each wand weigh? 5. What impact does each wand opening at the bottom have on the overall suctions... Etc, etc, etc .... what an absolute waste of time.