My Top 12 DIY Tools for 2021

[@tlangdon12]

When I bough my DeWalt Drill Driver, I make the conscious decision not to buy the Combi version with the hammer action because I didn't want to be tempted to use a relatively lightweight tool to drilling brick and concrete. I have a Bosch SDS Plus for that sort of job, and wanted to ensure the DeWalt would last a lifetime. Every time I have to go to get the Bosch it makes me smile though because it so easy to use even on the toughest of bricks. Good list. Thanks

[@harrycallaghan22]

This is one of my favourite channels on KZbin. Love your videos. Always so informative and to the point. You’ve helped out a lot with my own projects. Just using the Kramer kit 7 profiling tools to do my bathroom and kitchen. Thanks again Charlie.

[@CharlieDIYte]

🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. ☕Charlie DIYte Buy Me a Coffee Membership bit.ly/3xuQ3zb - access our incredible Discord DIY forum and help support my Channel. 👚Charlie DIYte Official Merch Store charlie-diyte.myspreadshop.co.uk/ - all new range of professionally designed merch.

[@cuebj]

One little thing to add to toolroll or pack of cheap SDS drill bits: a small magnifying glass and / or a drill bit guage. Once you get on a bit, and the bits have been used a few times, it's difficult to read size marks on drill bits, especially on budget bits - changing glasses from reading to arms length to other side of room is a pain

[@NH00531]

I can highly recommend the Cramer profiling kit. Bought it after watching Charlie’s review and whilst I still need a bit more practice it’s still a heck of a lot easier to get a good finish than using my finger! The only issue I have with list videos like this is that I’ve already spent £1,000 ‘window shopping’! 👍

[@gillianbc]

Head torch, totally agree. When hoovering, wait until evening and use head torch especially for ceilings. My ceilings were covered in cobwebs that I just couldn't see in daylight or normal electric light. Also great for corners, behind furniture.

[@CharlieDIYte]

Good thinking 👍🏻

[@SFFXd]

Great idea for the leaf blower. I have one sitting in my shed for over two years and I only used it twice. Never occurred to me to use it for anything other than leaves. But now I will try using it for other cleaning and clearing tasks. Great idea!

[@CharlieDIYte]

Use mine all the time 👍🏻

[@PrinceBarin77]

The laser level seems like an indulgence but it really is worth it. Won’t replace a level but supports so many tasks where a level would be more cumbersome or too short etc.

[@stratplayer10]

Some great ideas here. And fantastic videos. One thing I’ve learned lately is the value of having decent cordless tools. Not having trailing cords is both safer and allows more flexibility. I’ve bought some much stuff over the years and I’ve found that buying good quality really pays. I’ve not got the biggest of budgets, but spending a bit more, and buying the same make, particularly for cordless (same batteries etc) is the way forward. Impact driver, never leave home without one ! 18volt cordless, the way forward for me.

[@CharlieDIYte]

Thanks Raymond. I agree with all that 👍

[@benmjt]

Couldn't agree more. Buy cheap, buy twice is king in DIY.

[@jackkelsey6029]

Hello mate ! Your videos have helped me with a recent project I’m doing. The vids are super helpful for a beginner like me so keep up the good work !!

[@CharlieDIYte]

Thanks so much for taking the time to let me know that, Jack. I really appreciate it and comments from you guys is a massive part of keeping me motivated to produce this content, so I can't thank you enough 👍

[@ryk3899]

Good list.....but an oscillating multi tool HAS to be on any diyers radar. It'll change your life. Genuinely......also couldn't do without my impact driver

[@superseven220]

Agreed, I probably use those two plus my cordless drill more than anything else

[@owainjones9321]

Definitely! An oscillating multitool is a godsend for lots of DIY jobs.👍

[@CharlieDIYte]

Interesting point that. Yes, I've got a Ryobi multi tool which has been very useful over the years, particularly for cutting into plasterboard. It didn't make the list just because I don't use it very often. The Dremel is also an awesome tool. I fully accept there are probably some areas this list could be improved though 👍

[@SteveBower996]

@@CharlieDIYte it's a tricky call - one of those tools where you don't necessarily use regularly, but when used will be the only thing to do the job, ditto jigsaw etc

[@peterknight7880]

Oscillating multi tool is indeed a game changer. Impact driver is good, but I wouldn't call it essential.

[@hb5777]

Joint first place is the oscillating multi-tool.

[@alrotmot]

top of my list for recommendations is always an impact driver!

[@SteveRogers461]

Screwfix are selling Dewalt 18v impact driver (bare) for just 49.99 !!!

[@zaclal6496]

So true on that Stanley Screwdriver. Over the years I have bought three of them, the very first didn’t have a rachetting action (18 year old) But it is still my go to tool for that final torque turn. The driver bits over the years have gone down in quality but now use Bosch bits..... If you only ever buy one screwdriver ... then get the Stanley

[@CharlieDIYte]

Thanks Zac - good to hear you agree! Me too. It used to have a solid handle which was much better as the screw tip on the handle that you can store bits in tends to shred against the bits as it overtightens. Shame they don't produce the solid handle one anymore. Mine got knicked when all my tools were stolen from my garage.

[@SteveBower996]

I'll put slightly ahead of first place the Marxman marker - best value £5 ever for marking drill holes through battens, fixings etc.

[@jonathanbarnham9268]

bit late on this but one tool I've found so use full over the last 2 years DeWalt 24 Piece Socket And Screwdriver Bit Set Complete With Ratchet And Case its a little ratchet screw and socket kit. the ratchet is so useful for those tricky to get to areas. i use this all the time and saves going to bigger ratchets / sockets that take up loads of space/weight in a tool box. not sure if other manufacturers do similar as this is the only of its type I've seen. its paid be back in spades. one of the best little tools I've ever bought!

[@CharlieDIYte]

Thanks for the heads up on that Jonathan. I'll take a look at that 👍

[@sleepingwarrior4618]

Thos Bosch multipurpose drillbits (from 9:30), they are the best drill bits I have ever used. Brilliant.

[@paulacollins8327]

Kudos for your transparency re product links etc, another great video, thank you

[@hawkeyeNL783]

I would gift these cool tools to myself. If I could, I would! Charlie, your videos have given me so much inspiration over these lockdown months and I sincerely think that these DIY videos are wonderful and Ive come to know many things that I didn't before. Problem is, where I live there are too many limitations in tools industry, seems like we're living under a heavy rock no one wants to lift it and do something advance for a change also with sky high prices and no Amazon either. So yeah, I guess I'll just watch and learn for now! Thanks for sharing your pro DIY tips and in-depth tools knowledge.

[@CharlieDIYte]

Thanks mate, I really appreciate that. Sorry to hear about the tool situation. Where do you live, out of interest?

[@hawkeyeNL783]

@@CharlieDIYte A third world country, I'm afraid. Pakistan would be a good guess. Lol Anyhow, so there's that. At least I gain some knowledge from these videos, very informative content. Thanks for uploading.

[@jacko791]

I'm definitely on board with the 12v drill/driver recommendation. So many people seem to just buy an impact driver these days when they're really unnecessary for 95% of jobs. Erbauer do a 50 piece mixed drill bit set for £12 which is really small but contains all the same stuff as the dewalt tool roll. Perfect size to throw in a tool box/drill bag.

[@CharlieDIYte]

Thanks buddy 👍

[@richardlostit]

01:51 - Me neither! I use it to blow the dust from desktop PCs too.

[@moilyas2817]

Excellent man 👍

[@aghhhhhhhhhhhhhh]

Just realised I can use my running light to help me paint the skirting in my toilet 😃. Also realised that it highlights all the areas where the coverage is a bit (very) patchy when I thought it was ok 😭.

[@CharlieDIYte]

Yes it's great for that!!

[@AccountantDoesDIY]

Those Bosch drill bits - absolute game changer. Couldn’t agree with your comments more in those Charlie and am not surprised in the slightest everyone on site is now using them.

[@CharlieDIYte]

They're brilliant, aren't they!!

[@EppingForest304]

Those Bosch universal drill bits are a great idea... I’ll give them a try

[@CharlieDIYte]

Yes, they're really good👍

[@paulrowley71]

Great vid Charlie. Might have to put a Stanley ratchet driver on my Christmas list!

[@CharlieDIYte]

Thanks Paul. Yes it would make a fine stocking filler!

[@alrotmot]

i went and bought the stanley ratchet driver after seeing this. 👍🏻

[@gregorybstewart]

All great recommendations. I acted on your Ryobi cordless driver and impact and I’ve used it on every project since.

[@CharlieDIYte]

Great to Gregory. Ryobi tools are awesome - in spite of what you hear some clueless tool snobs saying on this channel. As someone recently said to me, I bought some Ryobi expecting them to last 6 months and 5 years later I've got loads of the damn things as they never die!!

[@lukeshepherd9529]

How have I been subscribed to the ultimate handyman for two years and never been recommended this channel!!

[@CharlieDIYte]

Aw, thanks, Luke. Watch out Ultimate Handyman, I'm coming for you!! 😂 Drop me a line if you ever have any queries on the DIY front 👍

[@tomlast2277]

Just recently subscribed after I stumbled over this channel wanting to do diy on my own house and I find it excellent so far. I haven't done very much diy but will probably find myself doing a lot with my own house now. First of all I have no tools or anything for that matter, with my first projects being to drill into brick to fix my number sign, plane my internal doors to fit my carpet and put up curtain rails or blinds, what tools and equipment would you recommend? After seeing some videos, I definitely will need a drill driver, level and a tool roll to start me off but what else what you recommend?

[@owainjones9321]

Another great video Charlie, keep them coming! 👍

[@CharlieDIYte]

Thanks Owain👍

[@cuebj]

Strongly agree with SDS drill if you can justify space and cash for it in addition to a lighter drill. Surprisingly cheap and stops you burning out lighter drills doing what they're not designed for.

[@TheBadmintonCoach]

Fabulous video. I will be spending a lot more time watching your videos in 2021. Keep up the great work you do

[@CharlieDIYte]

Thanks Paul, I really appreciate that 👍

[@1951timbo]

Best channel for me 2020. Thanks Charlie🤗

[@CharlieDIYte]

Thanks so much Tim, I really appreciate that 🙏

[@Smithb83]

The Bosch drill bits at no.2 are fantastic. Great for tiles

[@CharlieDIYte]

I haven't used them for tiles as I've always tended to use my Armeg bit. Good tip, Barrie, thanks 👍

[@offcuts4146]

I like the look of the tool roll cheers

[@CharlieDIYte]

It's the convenience of it more than anything, and as the years progress you can replace stuff in it with anything else you need.

[@786nobby]

Thank you for this great video, what's your opinion of the stanley ratchet screwdriver as many negative reviews of it. i am interested in getting one. please advise

[@CharlieDIYte]

The one in the video is very good. I've got about 3. The only downside is the top of the handle can move when you're tightening stuff so don't put any screw bits in it. They used to make it with a solid handle which was much better. Other than that it's great.

[@cuebj]

Like your flipping quick square from near side to far side of material leaving saw in place to position square on far side. In 50 years of using circular saw and making jigs and guides, never thought of that yet so obvious when you see it.

[@CharlieDIYte]

The rafter's square? Yes, it's a little bit of genius that, but not my idea. Something I learnt from my carpenter mate John, who also pretty much rescued the circular saw from the bin where I had consigned it. Couldn't work out why it wandered all over the place until he pointed out the importance of setting the blade at exactly the right height.

[@DeanneMariaCreates]

I would never use a leaf blower for my DIY; personal preference because mdf dust is carcinogenic and blowing it all over the place is not recommended. I built my own workshop cyclone which I attach to my dyson. This not only keeps my work area clean; it preserves the life of my Dyson.

[@cuebj]

Cheap alternative to cordless leafblower: cheap vacuum cleaner / dust extractor which lets you push hose into exhaust outlet instead of inlet. I have small Titan from Screwfix that I've marked "Blowing only" in permanent felt tip. Have blower in one hand and Henry vacuum cleaner in t'other but do wear a mask. Even better if you have someone else manage a second or even third vacuum cleaner. Do a few passes over a day or two to disturb and remove whatever doesn't get hoovered up but re-settles. Repeat till no noticeable dust kicked up by blower and you'll notice a huge change in freshness of smell, brighter colours, and more texture to surfaces. Just brushing and vacuuming doesn't cut it. I did the 3-foot high void under our ground floor very thoroughly and now it's a joy to crawl around and use for storage. Do as part of annual spring clean. It's amazing what gets blasted out of nooks and crannies!

[@CharlieDIYte]

Yes, good point, that. I've got the Titan, too. Hardly ever use it because of Henry, but the blower is probably the best feature on it. Well reminded!

[@njuham]

Quick question: I am going to tile over tiles in the bathroom. How do I use Sikalatex SBR primer? Do I mix it with the adhesive or paint over the old tiles and if so can I let it go dry before spreading adhesive? Thanks.

[@raydunn3501]

Good choices Charlie,,, I got all of them SOMEWHERE,,, between the kids borrowing them and unreturned,,, and my shed like your garage was before you put the shelving up,,, I could of course tidy my shed,,, but the kids wont let me disown them.

[@CharlieDIYte]

Thanks Ray. It's impossible to get it absolutely right as it's so subjective, but I appreciate the vote of confidence👍 The racking was a big step in the direction of getting organised after too many years of winging it!

[@valborchardt3596]

Thank you so much for this. Really a big help when choosing tools. Take care

[@CharlieDIYte]

Thanks Val. Good to hear from you!

[@jonasverhelst1924]

I got the DHR264 from makita and the XGT HP001GZ01 and TD001G with 4.0ah. Anny good? Got them for 2 days.

[@lcook0825]

This was a very informative video. Thanks so much.

[@CharlieDIYte]

Thanks Larry 👍

[@anubisthebandit5356]

I tried to get one of your no.1 Ryobi drill driver, but could not find one so I went for the Ryobi R18DD5 due to the brilliant torque control, which was a fantastic choice to build my new Keter shed which had 100’s of screws that all go into plastic. Not one screw stripped any threads. Brilliant 👍

[@CharlieDIYte]

That's a fantastic buy and 50Nm of torque with the control which is better than you'd get with an impact driver - excellent work 👍🏻

[@anubisthebandit5356]

@@CharlieDIYte yes, thanks 👍 it was a brilliant buy, thoroughly recommended.

[@1967AJB]

The Ryobi 12v is still on Amazon but with a EU plug on the charger. I know because the last film caused me to get one under my tree thanks to my nieces!

[@CharlieDIYte]

Great work - you'll love that!! 👍🏻

[@marclevy2561]

Charlie, this is a great little summary of the essential DIY kit we should all have in our 'DIY tool armoury'. Very useful advice. Made me smile when your first after thought was to add your Kramer Silicone Profiling kit (Couldn't agree more btw) 😁 👍 Keep up the great work 👏

[@robinstrahan]

Yes, I was surprised that the profiler didn't make the list. I bought one based on your videos and I suspect that it would get more use by a DIYer than some of the power tools you listed. Great video nevertheless.

[@SteS]

I bought that head lamp on ebay after Big Clive recommended it over 6 months ago. They've gone up three times the price since. Brilliant light without that annoying SOS light.

[@CharlieDIYte]

That's annoying. It's good though, isn't it. I found a Petzl yesterday, whilst walking in the fields. Tempted though I was to pocket it, my conscience got the better of me, and I hung it on a branch in case the owner finds it. They're meant to be pretty good. Being rechargeable is key though.

[@SteS]

@@CharlieDIYte probably the next person will nab it. 😂 Just rechecked ebay and they've gone up 2 pound. Mine was £4.38 to be precise. This one seems to have SOS though! www.ebay.co.uk/itm/Waterproof-LED-Hands-Induction-Headlamp-Night-Fishing-Head-Light-USB-Charging-RC-/173916613788?_trksid=p2349624.m46890.l49292

[@richardlostit]

02:58 - You do if you only have a car to carry stuff, not a van!

[@valborchardt3596]

Hiya Charlie. Please tell me, what are those multi purpose drill bits called? I know you said they were Bosch but i dont see them in the description below. Thanks kindly.

[@dickie8184]

Bought my very first impact driver 6 months ago. Can't believe I've gone this long without it.

[@stuartlockwood9645]

Hi Charlie, thanks for the video, some great ideas there, question ,whith the 12v drill / drivers will they cope whith driving a few lrge screws ie-2_3" no 8s ?. Your thoughts on this would be appreciated, stay safe mate, best wishe's to you and your's, Stuart.uk.

[@ridgmont61]

I think laser measures & stud/cable/pipe finders are worth considering.

[@CharlieDIYte]

Good point Mat. Yes, I have a Leica laser measure which I use a fair amount but it wouldn't get on my DIY essentials list, and I have a Bosch cable finder, which is about as reliable as I have found in a market where they seem in cable of producing anything that truly works.

[@dhflannagan1]

How any one can give you a hands down is beyond me.

[@CharlieDIYte]

Thanks David. Those don't bother me, but it's kind of you to mention it. The comments that annoy me are when people say "you're doing that all wrong" but they can't even be bothered to explain why they think that is the case - which is usually because they don't know what they're talking about, but felt like putting the boot in anyway. Doesn't happen very often gladly, and I love the comments - they're such a valuable resource for me and hopefully everyone else 👍🏻

[@uk_assassin8684]

Good informative video 👍🏼

[@zaghardtakal7338]

Thank you!

[@davemcbeardface8976]

I did the same thing with the erbauer bit set too lol

[@CharlieDIYte]

Too tempting isn't it 🤣

[@davemcbeardface8976]

@@CharlieDIYte it's like putting sweets next to the till!

[@CharlieDIYte]

@@davemcbeardface8976 Ha! Too true 😏

[@johnmilner4667]

Very interesting. Thanks for ideas 👍

[@typhoontim125]

Honorable mention to a Cordless Multi-tool?

[@CharlieDIYte]

Maybe I should have, Brian. They are very useful for certain jobs. I just don't need to use it very often. 👍

[@typhoontim125]

​@@CharlieDIYte Thanks for the reply Charlie, your answer makes perfect sense. Really great videos....did you ever present on TV?

[@davidmorgan4055]

Charlie I'm looking for a saw to do some DIY I'm not sure what one to buy I'm looking for a plunge saw type or a good quality circula saw with track

[@CharlieDIYte]

Hi David, I'd go for the Erbauer plunge saw www.screwfix.com/p/erbauer-erb690csw-185mm-electric-plunge-saw-240v/3875p It's affordable, comes with a good quality short track and is compatible with longer tracks.

[@whomadethatsaltysoup]

Hi Charile, and once again, thanks for sharing. I seem to remember you recommending the leaf blower a while back. However, when I looked at it, I decided it was a bit too steep for my Scottish pockets. I was pleasantly surprised this time round to discover that it was on offer for £89 with a 4ah battery and charger. Well, normally the battery alone wouldn't be too far off that price. So, as I needed another battery anyway, I took the plunge and ordered it. Sorry to say, I'd already placed the order with Ryobi direct - before watching your 10 tool review. Anyway, I'm very pleased with the blower, and the extra battery, as I own a number of excellent Ryobi 18v tools. I'd say the most useful of them has to be the 16g brad nailer I bought to replace the Hitachi gas nailer that has just become too unreliable after 8 years of use, The Ryobi is heavier - much heavier - but does not require gas, and is much cheaper than the yellow, blue or red alternatives. 👍

[@CharlieDIYte]

That's a great price for the leaf blower, and yes I've bought a lot of stuff through them over the years. I used that nailer in this video kzbin.info/www/bejne/qpWwn6Ghq66hqKc I agree it's an absolutely fantastic bit of kit. Thanks for the comment and for watching my vids 👊

[@stevecockton6624]

Struggling to find the model of Circular Saw you recommended,apart fom Body only. go for it and just buy blade and battery or do recommend another model ?

[@CharlieDIYte]

Yes I've just had a look and would agree with that. There generally seems to be a lack of availability, possibly because of Covid restricting production. I can only speak for the one I've got, so I can't really recommend anything else. If you're planning to use it exclusively for cutting full sheets of MDF or ply, you could look at a plunge saw instead as you'll find the tracks much more accurate than anything you can make yourself to fit the circular saw. I'm currently using the Erbauer I recently bought from Screwfix (comes with a 1400mm track), although I still use my Ryobi with the fence for narrower cuts, on my current wardrobe series.

[@stevecockton6624]

@@CharlieDIYte thanks for the quick response, Body with Blade + 5.0ah Battery it is then. Some dislike of the 165mm blade saying its a odd size, does that mean it's difficult to get hold of or are most others 150mm ?

[@robmaule4951]

Boom! Thanks Charlie boy 👌🏼🏴󠁧󠁢󠁳󠁣󠁴󠁿👍🏼

[@CharlieDIYte]

You're welcome. Thanks Rob 👍

[@user-qw1ed6ro7n]

Any recomendations for affordable diy laser levels?

[@CharlieDIYte]

I'm afraid I only have experience with that DeWalt.

[@danludlam1562]

I always notice that Charlie never seems to be bigging up the mitre saw. I find doing smaller cuts with a circular saw really awkward and a bit like the wrong tool for the job. Never seems to be straight when I use a hand saw either. Got a mitre saw on my Christmas list.

[@CharlieDIYte]

Yes, that's probably another one that should have been on the list. Show your partner this bit.ly/2JeV8Yn and if they buy it now they get a half price stand to go with it. Fantastic value for money, the Evolution saws.

[@danludlam1562]

@@CharlieDIYte that's exactly what was already on the list although from Amazon as I can't actually see any way that I can order it through Screwfix 🤔

[@jimkenny4154]

As usual a great piece of advice. 👍

[@CharlieDIYte]

Thanks Jim 👍

[@TheMark1840]

Ok, Im not diy, but if I was as keen as you are and spend as much time as I assume you do building, I would spend the extra and get all one brand, eg Makita. The advantages of a one battery system across an enormous range of tools is worth its weight in gold, and is a huge time saver. On top of that the tools are better built and will last longer. 1 double makita charger is all I need for about 20 tools. If you are doing a lot of diy or professional work, I think buying different brands is a false economy. They will pay for themselves. Love the channel - you call yourself DIY but clearly you are very skilled and thorough.

[@henri6595]

You kind of really need two brands depending on what you want to do. I got 99% Milwaukee stuff (Cars and General renovation) but started getting some DeWalt too. DeWalt milter saw, table saw, and Spade Drill are the best. When it comes to carpenter DeWalt seems to have the largest selection.

[@samusordicus]

You're the man!

[@lazylad9064]

Good video we probably all have a different list to be fair. My number one is my digital radio, I'd be lost without tunes at work 👍👍

[@CharlieDIYte]

That is a very good point. I have a Ryobi radio that runs off a drill battery. It's analogue so I have to connect my phone using the av cable if I want to listen to Radio 6.

[@parapilot09]

love it Charlie

[@SteveRogers461]

1. Combi Drill 2. Jigsaw 3 Circular Saw

[@justintemp]

What are your thoughts re brushless vs non brushless tools? The ryobi set you showed is not brushless so Could need changing after a few years?

[@theMrFouldsy]

Brushes are easy and cheap to change. Brushless tools will give you a longer runtime on each battery and are usually more powerful though.

[@justintemp]

@@theMrFouldsy over time won't brushed just wear out more quickly so high power intensive jobs like sds drilling etc might be best to opt for brushless?

[@theMrFouldsy]

@@justintemp Brushless tools are almost always better than their brushed counterparts, high power applications are where this is most apparent. It's just a question of whether it's enough to justify the extra cost. Brushed tools will wear out faster but they're easier and cheaper to repair when they do. For a tool that you intend to use more than once, buy the best you can justify the cost for.

[@justintemp]

@@theMrFouldsy thanks Ryan. It is a dilemma. After purchasing lots of cheap and then decent ones like black decker i may have to up it to ryobi as that's more affordable than dewalt and matika but it's trial error. For the ones that broke i could buy 1 decent one 😂

[@martyn334]

almost got the ryobi set from b&q but it was £100 at some point?? kind of put me off

[@CharlieDIYte]

How d'you mean? They've got a new HP range which I'm very impressed with. Worth looking at. 👍

[@davemaynard3826]

Charlie. Why is the ryobi sds+ drill not any good. The newer model? I’m looking at getting a whole new tool set and am finding your advice excellent. Dave

[@CharlieDIYte]

Hi Dave. I didn't buy that one at the time because mine was the more powerful option. The advantage it has over mine is a chisel function but the reviews of it are AWFUL (overheating, malfunctioning etc). I don't know why they discontinued mine because it's been brilliant. Have you already got Ryobi tools? If not, you could do a lot worse than buy that Erbauer SDS. The reviews of it are consistently good. Thanks so much for the positive comments - really grateful to have you supporting the channel 👍🏻

[@davemaynard3826]

@@CharlieDIYte yet to even buy any tools yet. But loving the idea of the one+ battery system for the saws drills I drivers etc. Will check the erbauer Also tempted with that beast of th Titan. And the evolution mitre saw you’ve demo’d. Will help with my plans post house extension

[@darranowen9704]

Hi I am looking to get new power tools at my B&Q I seen erbauer tools.Is been a very long time since I've bought new tools things are all new to me. I do DIY around the house so do you think the make Erbauer would be ok as I was thinking about getting all the tools I need in the same make so I can save on batteries. Please can you help. P.S. i love the videos very helpful. Keep going.

[@CharlieDIYte]

Hi Darran, thanks for that. Yes, I've been very impressed with the Erbauer tools that I got from B&Q - my video on them is here kzbin.info/www/bejne/n2euipmoeaedadk. I think they strike a good balance between quality and price. Depending on what you're thinking of getting, they've got some great starter kits, www.diy.com/search?term=shoperbauerstarterkits The one that caught my attention is this one bit.ly/3ljZJFZ although you'd want to invest in another battery - maybe the 2Ah as this would be more than adequate for the drill driver, torch and impact, leaving the 5Ah for the SDS (which by the way has had some good reviews). This Starter Kit is also pretty interesting bit.ly/3mlfQ7h and my word, with drill driver, impact, jigsaw, grinder and circular saw you have a LOT of tools to get you started, although it lacks the SDS, which you could add for £100 bare (without battery) or £150 with a 4Ah battery. It very much depends on what tools you're likely to use most often. You probably won't use the impact driver that much. If it was me, I'd be looking to get 1) Drill driver 2) SDS 3) circular saw as the priorities. With a 2Ah and a 5Ah battery and their fast charger, that comes to £355 so you might be better buying separately like this, rather than buying a Starter pack. That way you can cherry pick what tools you need. Any other questions, drop me a line on email [e-mail]

[@mjshols1498]

Hi Charlie , I have been binge watching your videos and installing your fence a while ago was my go to ...I did everything u said and my fence looks amazing ...Thank you 😊 ...I noticed I haven’t seen you use a jigsaw and I wanted to get one and there are loads out there not sure which one to get ...I am looking to making some curved edge stuff and lost on which one to get ....I have a funny feeling you are going to say a RYOBI one ...lol HELP !!!

[@russelljaques93]

Definitely sending the video to my partner! But would you have any suggestions on Mitre saws?

[@owainjones9321]

Evolution R255SMS is the one I got for my birthday this year. Great value!

[@CharlieDIYte]

Thanks Owain. Couldn't agree more. The Evolution are fantastic value for money - remind me of the Titan SDS in that regard. I too have the R255SMS. You can do a lot worse than that. Mine unfortunately had a laser that was inaccurate when shipped, but I wouldn't let that put you off. I could probably get it fixed but haven't got round to it and you don't really need it to be honest. We also have an Evolution Rage in the office which has paid for itself ten fold.

[@owainjones9321]

@@CharlieDIYte Absolutely agree with you on the Titan SDS front too. I was very nearly tempted to buy one but then saw an ex display Ryobi Rsdsk800 with case come up in my local homebase for £50 so bought that instead. Slightly lighter and less powerful but perfect for around the home jobs and to supplement the R18PDBL brushless combi I have as well. I also have the RID1801M impact driver and find I use that probably more than the drills. I'm very tempted to get a 12v drill driver too after watching your videos but that may have to wait until I have a justifiable excuse to get one!

[@isthisthat]

omg I hate the stanley maual screwdriver! I can never get the bits out of the neck pockets. They get stuck on the rubber

[@CharlieDIYte]

Sorry to hear that. Of the options out there, it's the one I've found the best over the years.

[@Tarbard]

Good video, i've added a couple of things to my basket.

[@CharlieDIYte]

Good stuff! Glad you found it useful👍

[@SKMusic1985]

Can anyone recommend a good mitre box? Every time I read reviews, I get confused. I am going to be using it for dado and skirting.

[@CharlieDIYte]

For the skirting you're best scribing the internal angles like this kzbin.info/www/bejne/Y4utfa1-eMqtsLc For the mitre box how well for something like this www.screwfix.com/p/mitre-box/7454v

[@danbdennis]

Wot, no impact driver!? Most tools are an obvious buy - everyone knows you need a drill -driver/combi. But an impact driver seems unnecessary - until you get one and find how much better it is than a drill-driver. In fact I would rather have an SDS drill and an impact driver, if I had to choose which to sacrifice...

[@CharlieDIYte]

I have an impact Daniel as discussed here bit.ly/3sxpfw5 and a colleague I work with couldn't be without his - and so would agree with you - but I personally think it's overkill for most jobs.

[@danbdennis]

@@CharlieDIYte Thanks for your reply. Usually one wants to drill a hole with one power tool and then drive in the screw with another - one doesnt want to muck around changing a drill bit for a screw bit - so it makes sense for the thing one drives in the screw with to be that which does it best - an impact driver. It is also better than a combi drill at extracting old tight screws...

[@the-elliott-day]

Screwfix (UK stockist) have some insane deals on combi drills! The Titan SDS is indeed a beast, plenty of bang for one's buck, don't forget the lithium grease folks! But Charlie, a great Christmas for all of us would be for you to have a channel on Patreon...🎁🎄🛠️

[@CharlieDIYte]

Thanks Elliott. You're right about the grease. My father in law has that SDS and the grease reservoir is bone dry!! Very interesting what you say about Patreon. I've registered but haven't got round to doing anything yet with it as KZbin sucks away all my time. If you have a moment I'd really like to know what you'd like to see me doing on Patreon? 👍🏻

[@United-Til-I-Die]

Hi mate, try the Crescent Lufkin tape measure 👌🏻

[@ronaldomac566]

Personally i would never buy Ryobi or Erbauer, i'll stick to Makita and Milwaukee #builttolast...... Great video btw...

[@ryk3899]

That's just snobbery. Ryobi make great tools.....infact their 16ga and 18ga nailers are class leading

[@fanfeck2844]

@@ryk3899 , especially for DIY use. Just a waste of money buying these brands. Probably all made in China now anyway

[@CharlieDIYte]

Thanks guys. Someone said to me recently, I bought a Ryobi expecting it not to last and I've ended up with loads of them because they never die, or words to that effect. I've found Ryobi reliability and build quality to be fantastic over the years, although they're not as cheap as they used to be. Like all these things, you have to check the specs before buying. Spoke to a member of staff at B&Q a while back who said that brands like Makita have been dumbing down the internal specs of some of their lines to try and bring their tools to a wider section of the market, as a result of which they've had a fair few returns that never used to happen. That Erbauer combi I have with its all metal chuck, metal gearbox and an impressive amount of torque is a very high spec bit of kit, and the battery life is fantastic. Each to their own though. I can't argue with what you say about Milwaukee. @Fanfeck I think they are all made in the same factory, as it happens!

[@CharlieDIYte]

I have one of those nailers and it's outrageously good! Short story, Ryobi finally got in touch through their PR people. I said "about time, do you know how long I've been flogging your tools for on my channel😅" I was really keen to do a bit of a feature, maybe go and visit them, talk to the technical guys, get under the skin of the brand a bit, but they weren't interested in that. Just wanted to send me a couple of tools, which obviously I'm massively grateful for, but it's not going to be nearly as engaging or interesting as a video. Humpf!

[@ronaldomac566]

@@CharlieDIYte Fair do's mate, never had to return any of my power tools thus far, i think Milwaukee are made in the USA and China so who knows....

[@planespeaking]

Axminster tools 400mm combination square is quality.

[@CharlieDIYte]

Yes, a combination square should probably have made the list. So hard to include everything!

[@awantamta]

Thanks for that useful video. I wish somebody would buy all of them for me.

[@HIK_48]

ALL of them?! That's just greedy. I'd settle for 9 ;-)

[@awantamta]

@@HIK_48 Well, I like my toys

[@davebarnes1742]

I hate getting tools for christmas ,i would prefer socks ,must tool have gotten in the past end up in a drawer never to be seen again because not wanted just gadgets

[@Bushcraft-xz6xd]

Great technique on the plane if you are after losing a fingertip or worse! One mistake or distraction and the blade will sods law eat flesh on that hand whimsically caressing the wood, leave that for the wife lol.

[@j.t.hlandscapingservices6800]

Can you please do a update on Henry vrs George

[@havefun1559]

Rafter square

[@CharlieDIYte]

So hard to get the list right. Yes, there's a good argument for that.

[@xlfive]

I’ve got the Erbauer SDS And we have the Bosch GBH 36 vli version at work ,to be honest I’ve found no difference in performance,and my boss paid £350 lol I also bought an extra 4ah battery so no down time

[@CharlieDIYte]

Mate, that's great to know, thanks - particularly as I've had my eye on this for a while. The other Erbauer tools I've got have been great, I've got to say!

[@xlfive]

@@CharlieDIYte I’ve got the impact driver,jigsaw and orbital sander to so I can swap batteries around Granted I’m not doing as much DIY as you but they are great tools

[@tonycummings4588]

can people comment if erbaur are a good brand? I see them in b&q all the time but they look like a budget brand ( because they look like they awfull things sold in lidl/aldi ) even though sometimes they aren't actually cheap.

[@CharlieDIYte]

Tony, if you scroll down through the comments to my original video on these kzbin.info/www/bejne/n2euipmoeaedadk you'll find some pretty glowing reviews, and the SDS I talked about in this video has a lot of love online too. Yes it is a B&Q own brand and the warranty support is only 2 years but this particular line are manufactured to a very high spec and I've been using them since April 2019 and they haven't let me down once. Battery life seems really good too, and if you get the fast charger, they charge up in no time at all. The only criticism I have which a few other people have noticed is that when you depress the trigger, there's a slight lag before the power kicks in, which if you're used to other brushless brands, might annoy you a bit, but if you're not, you'll probably not notice it.

[@tonycummings4588]

@@CharlieDIYte thanks for replying charlie, the video and comments are all very positive.

[@Keezo]

Speaking of headtorches buy a petzl Tikkina or Tikka, theyre only 20-30 quid and will last you a lifetime, I work backstage in a theatre and its what everyone nation wide uses. We use them every day and keep them round our necks then use the back plate to hold it in our mouths when we need to uses them. Saves us having them on our heads all show and you saves you looking like a plonker haha

[@CharlieDIYte]

Thanks for this - looks a nice piece of kit. Just a massive shame they don't do a rechargeable one, as for me that's a red line. Things have been tough for you guys during Covid. Hope you're ok and keeping busy somehow 👍

[@Keezo]

their newer models have rechargable battery packs also the battery life with 3 AAA is insane :) Also yeah its a complete stand still, loooking like march is earliest we could get going again so ive spent a stupid amount of money on tools and made a nice little work shop in my garage to keep me occupied with projects haha

[@angrytigger83]

DO NOT blow masonry dust and debris around without wearing goggles and a dust mask.

[@AbulHussain-hh9rg]

Excellent reviews Charlie. Please do a video on recommendation for a first time router. Thank you.

[@CharlieDIYte]

You could do a lot worse than this Ryobi kzbin.info/www/bejne/lZOsoqF3m52VaLs

[@skalra63]

I have that screwdriver, it's great, must have had it 15 years or so. About 5 years ago I got one of the stubby versions. Also those Bosch drill bits are insane. Like hot knife through butter when I went through both wood and brick in one go

[@CharlieDIYte]

That's good to hear, Sunil. Thanks for the comment 🙏

[@NoNopeAndNo]

Cavemen would disagree🙄 😅

[@THEBOB566974]

Glad i got my 3 piece Ryobi set from b&q before you made this video it was already hard enough to find them in stock! For reference, the free tool deal redemption is quick under a day after product arrives and they say they will deliver it within 14 days. was impresed.

[@CharlieDIYte]

Thanks Jack. That's great to know. What free gift did you go for? Great quality tools, Ryobi 👍🏻

[@THEBOB566974]

​@@CharlieDIYte I ended up going for the strimmer, needed a new one anyway, It was one of the more expensive of the tools which were listed, so i think I got my money worth :)

[@normanboyes4983]

Nice one Charlie - I actually have all those so I am just putting Festool stuff on my Xmas wish list - it’s about time you got a Domino too.🤔😂

[@CharlieDIYte]

Yes I agree with that Norman - good to hear from you, by the way 👍🏻. You're right, I could do with a Domino. Festool's lovely kit. Just a bit out of the price range of most DIYers but admittedly a lot of the tools on my list aren't cheap.

[@nickolasreeks4743]

Brilliant............ Email with links has been sent to Santa. Cheers Charlie.

[@CharlieDIYte]

Good work Nickolas 👍