Transform Element OP Leader VS Magic Square Light Of Freedom (Sit Down Saturday)

[@aidanfriedfeld8889]

It’s so hard to choose honestly. They both look great for different reasons. I saw this comment somewhere else, but it seems magic square is replacing MP10 whereas TE is competing with MP44.

[@joeydahl9594]

Yeah, i'm finding that out. I would love to just say screw it and get MP-44, or try to find an MP-10 that isn't stupidly overpriced. Sadly I think it's going to come down to one of these guys. I think over all I like Transform Element with the only things I wish he had was the bulkier lower legs of the Magic Square and I wish the feet weren't on the side but rather the middle like it should be, the good thing is I could get the second head which is better for Transform Element with the second release. For the Magic Square, one of the few things I wish was that he didn't have the "baseball cap bill" looking thing on his head. I do prefer the colors of the Magic Square though. The Transform Element looks more toyish while the Magic Square looks better. Tough choice, kind of leaning to Transform Element based solely on the facts that I really wish Mp-44 was cheaper so I could pick him up and also because I honestly think this one might be easier to get a hold of. The Magic Element is kind of falling in to the Mp-10 realm where it's either harder to find than I would like, I'm not sure if it's a crappy bootleg instead of the proper figure, or some jerk is charging too much.

[@gmon78]

@@joeydahl9594 Why not get a Wei Jiang MPP10? It's an excellent figure, and considerably more affordable than getting the official release. Much bigger too and the way they made his lower legs that little bit longer than MP10's eliminates the monkey arm issue the original had. Really good quality figure; probably even better quality than the original. I got two of them on eBay. One to mess around with and the other theoretically for display but he's still languishing in his box😃

[@joeydahl9594]

@@gmon78 I might consider it. Right now I got plenty else to think about though so either MP10 or Wei Jang MPP10 will have to wait.

[@AssaultRider555]

@@joeydahl9594 you actually get an alternate helmet piece for Magic Square that will fix your problem with the baseball cap.

[@rodrigodarian3357]

You all prolly dont care at all but does any of you know of a way to log back into an Instagram account..? I was dumb lost the login password. I love any assistance you can give me

[@Trikeboy2]

I really like the movie accurate matrix chamber on the Transform Element Prime. That was a nice touch.

[@Tubes78]

Me too. The best one yet.

[@araknidude]

you were so close to making a The Touch joke and you didn’t. how dare you

[@NerdyTransformed]

I think MS found a good middle ground between being cartoon accurate and looking like a Masterpiece figure

[@mags2424]

Magic Square can get more than 90* at the elbow.

[@luminusprime]

Yeah, you missed the double elbow. I mean, it's almost as ugly as the knee, but it IS there.

[@SentinelBayReviews]

He actually mentioned it in his review on the MS, which made me realize the double joint in the first place

[@aegis20xx7]

The second release of the Transform Element comes with a second optional head that is much more G1 looking, actually looks similar to the MP-44 head.

[@thomasleon9550]

If the transform element had an ab crunch it would be no competition to me, but I do love my articulation.

[@CouchCit]

Ditto

[@Magnis501]

I found it very interesting that the kids like the TE version which is more cartoon accurate and the adults like the MS version which I also like because it's a little more stylized. I like these videos. I think you do a pretty good job of being objective and showing where one loses points vs giving it the point because you like it better. I'd like to see a cyclonus vs vid xtransbots vs fanstoys, Bad cube vs takara lambos, unique toys vs zeta toys bruticus. Thanks for the videos

[@chojinacd]

The kid's like the TE because kids are like magpies, especially girls :oD True story.

[@nerdraged411]

@@chojinacd Kids are also naturally more honest in their opinions than adults are. Also your magpie and girl reference made zero sense in the context of this video and their choices.

[@brianpavlina8638]

Wow! That was so much more in depth of a review than I expected. Thanks Bobby Skullface. Good job.

[@rjohnson80100]

What sells me on Magic Square is the Leg Sculpt. I like my MP figures to be a good blend between G1 toy version and toon version.

[@EpykkDyzastur]

I think it’s also worth noting that while MS-01 has a thigh swivel, the leg articulation is better on TE-01. MS-01 cannot bring the legs 90° forward although, I do prefer the leg ratchets on it. Also, MS-01 has waist articulation due to the hinge system but, I feel it’s only due to being necessary for the transformation and it breaks up the sculpt. I love both, I own copies of both but, I prefer TE over MS. I honestly don’t think you can go wrong with either figure. Pick them both up, if you can.

[@Wymorence]

TE Optimus: the undernourished guy who wants to show you his pog collection. MS Optimus: the bodybuilder guy who wants to crush his enemies (and not hear the lamentations of the humans).

[@jon9550]

Magic Square's elbows are double jointed and get you better than 90 degrees of bend.

[@mayadawnfisher3222]

I just got my Magic Square Prime this afternoon. I love him. I really enjoyed this edition. Thanks for doing this, it may go far to help out those that are undecided.

[@2067792332977602]

I still like the TE-01 better. The other one is just too beefy for me. And te I feel fits more with mp36 because of the style of hands and bottom legs

[@lefkadapao13]

I loved how you imitated bane 😊

[@GareWorks]

I think the takeaway here is that they're both pretty fantastic and you can't really go wrong, so just pick whichever one you think looks best (or both, which I plan to do, just because).

[@glenghiskhan100]

I just got the TE 1 With the new head I'm very happy with my choice

[@blood852000]

Me too

[@jamesdanielski7347]

Thanks for really getting into this. The hard part is that these guys are so evenly matched. Only thing I know for sure is that MP-10 is going into truck mode for the rest of it's existence.

[@SoundwaveWill]

Thanks for the amount of time you put into your Sit Down Saturdays. Your break down on these Primes are pretty much in line with how I’ve viewed both releases. What surprised me, though, is that I’m even more excited for the Takara v3 after watching. The muted finishes and lack of paint on both leave me wanting more. Thanks again for the deep dive.

[@generalgrevious2005]

nice review. i just picked up the TE-01 this version i got is there 2.0 version what`s nice about this 2.0 version is the upgraded head sculpt which blows away the v1 sculpt.

[@maxlovesamber]

I would like to have heard the mention that Transform Element hides the waist parts in alt mode versus mp10 and magic square leaving it out. Awesome comparison as always.

[@nostalgicforthe70s18]

Thanks for the review. I just picked this up on eBay. Although I will keep him in Bot Mode, TE-01 has the best Truck/Cab mode. With Magic Square and MP-10 you see his pelvis in Truck mode which ruins the illusion of being a truck while Transform Element nailed it.

[@rick-ry3kj]

Cant go wrong with either one, I chose the TE, because it comes with a movie style head.

[@shaldurprime7154]

the way the transform element faceplate curves up into the brim of the helmet, reminds me a lot of RiD 01

[@nostalgicforthe70s18]

I had bought the Magic Square first but it wasn't toon enough for me so I decided to buy this one and I have to say I like it much more than Magic Square. You have to see both figures in person to really see how nice the TE version is. TE has better toon proportions and some real nice heft to him. Both are nice but I kept the TE version.

[@2007suprasport]

Mannn!! Your comparisons are absolutely Insane!!..had to watch this a few times just to get all the info. Absolutely phenomenal video! 🌟🌟🌟🌟

[@brianquittmeyer6212]

Thank you for making it easy to identify the bots throughout the video (labeling and consistently keeping them on the same sides) and not simply calling them by the brand name. It's one of my pet peeves with comparison reviews (specifically thinking of a few of the 3P Omega Supreme comparison videos I saw) where they aren't clearly labeled and the reviewer will simply call them out by name without as much as a point to which one they're referencing. Then, you get halfway through the video and can't remember which bot was which. Thanks again.

[@MisaelCastilloBrenes]

Great and detailed comparison! I like the family interviews a lot as well (I believe in another video you asked some questions to your father, which I really enjoyed). As you said is not prescriptive but it makes you take into account aspects that I may not see due to my own preference, so I appreciate the effort and time you invested on this video. Thanks a lot!

[@gatchagrey]

so when you focus on individual sections I like the magic square..but when I look as the figure as a whole I prefer transform element...weird

[@easterntitan8308]

Cartoon accuracy is questionable in the G1 cartoon. That said, I prefer both cartoon accuracy and playability. That’s what makes me TE-01, but I think we can all agree on this. At least they’re not MP-44.

[@MrTheMighty]

It's been almost a year since all this uproar, and I'm finally picking one of these guys up. I know I'll never be able to justify MP-44's price tag, and I've only ever had the Walmart release of MP-01 and a YotH MP-10, so it's always felt like I didn't have a "real" MP Prime. After a lot of deliberation, I'm going with the metallic version of Magic Square's offering. Bobby, your videos covering each of these separately and this "VS" video helped me considerably.

[@brenoferreiraferreira4409]

I don't agree with every little detail but in the end I also prefer the MS-01.

[@866Infernus]

for the Magic Square, you can extend the shoulders to make them go to full 90 degrees, and it has 2 hinges for the elbow

[@MagnusLootCrate]

Well, like you've said before, it comes down to the face. And I like the face better on Magic Square. But, then again, I'm the one who has to look at my collection every day so there's that too.

[@eyedestroyeverything9953]

3rd party 🔥🔥🔥🔥🔥🔥🔥🔥 Now give me Astro train !!!!!!

[@kennythetrend3688]

Um...DX-9 made one? Like 3 years ago....kzbin.info/www/bejne/b6CZgYqgpb9ka7s

[@PrimeCollectibles]

@@kennythetrend3688 ..and it's kinda crap compared to 3rd party stuff these days in terms of quality and toon accuracy. I'd agree with @Sour Pixels, we need a good Astro Train.

[@eyedestroyeverything9953]

Kenny The Trend I know . It’s not that good

[@jeremynelson7920]

@@kennythetrend3688 I own and am good with DX9 Astrotrain

[@notgray88]

DUDE THOMAS WAS JUST RECENTLY ANNOUNCED YEET

[@angryangel]

MS if u push the elbows more u get double bend. U should of given it to Ms too. Try it out

[@_V.Va_]

Interior die-cast is very much to my liking. Structural integrity, babyyy

[@tfdude1394]

Both appear to be amazing Nope-timus, but I personally lean more towards Transform Element. I like that the truck cab is all red like the cartoon and that the hands match very closely with MP Megatron. Magic Square looks really cool, but he's a tad too chunky for my liking and the axe is too damn small. I still want the MS mold (maybe when/if a Magnus and/or Nemesis repaint comes out), but for me, TE will be my new Prime

[@bottlecap7533]

Its gotta be Magic Square for me. The only gripes I have with the figure are the Matrix chamber and his lower legs. If MS had the Matrix chamber and leg engineering so that the rear of the truck wasnt so damn t h i c c, MS would be my perfect Optimus Prime. Even still, MS still takes the cake. I do love TE's tho, especially the 2nd release with the Season 2 accurate head

[@iamtheomnimonkey]

You chose MS. You're kids chose TE. You're wife split. Look to MS, feel to TE. Personally I'm split. For everything I like better on TE, there's something else I like better on MS. Based on multiple reviews, comments on those reviews, and forum posts I feel like the community is split between cartoon accurate VS. 90% accuracy w/a mature look. I'm sticking with MP-10 until something scratches all my itches. I'd like to see what Fans Toys can do.

[@eeiko321]

Jason Chastain imo MP10 looks so crap against these two

[@texasbeast239]

I think TE wins for toon accuracy, and MP-10 still takes it on sophisticated look. I still prefer the toon/sophistication balance approach to MP, so I'm staying with MP-10. I might go for that electroplated version, if anything.

[@LuqmanHakim-xi9qz]

@@texasbeast239 I still love how Mp-10 looks. Gorilla arms and all. Part of me still wishes we get an upgraded version of MP-10 in terms of articulation

[@2dbeats3d]

I wish TE’s Prime was able to take MP-44’s trailer. Since out of MP-44 and 10, I prefer 44’s trailer

[@AgtWashingtub]

16:56 This hits me right in those parental feels. Nobody else does that.

[@N3RFTHIS]

I would love to see more cartoon accurate window pieces. Blue with the white reflection

[@TripChebook]

Matte or high gloss?

[@N3RFTHIS]

@@TripChebook matte

[@PrimeGalvatron]

This was the video I needed! THANKS! Seeing them side by side I'm gonna go with MS, even though I like TE silhouette better.

[@missiletoad7015]

I chose the Magic Square and I love him. I love the way he looks and has a great presence on my shelf. Things about the TE one just look weird to me. The head sculpt and the break in the top of his helmet do not appeal to me. I could nitpick some things here and there on my Magic Square, and some tweaks would make him even better (Some paint tweaks, and I think the plates by his cheeks ought go higher up on his face cheeks, etc) but I'm extremely pleased with him. In any case, both of them make me find the official MP44 unappealing where concerns it's messy, big backpacked, kibble-y, cut-up look (and the visible red plastic in leg gaps etc) and, of course, price!!

[@VAULT-TEC_INC.]

I prefer the body of TE (and small details like the rivets) but I prefer the Magic Square Head sculpt by far. I also love how the TE does the Matrix with the movie accurate “flip up” covering.

[@vans0183]

Love the comparison videos! I was in for the magic square figure until this vid, where as you said where personal preference matters. I really connected with the transform element. I can’t help the connection I have with a toon accurate representation on display even with MS being better in other categories. Interested to see how MP-44 turns out but I can’t rationalize the cost for that figure.

[@jaykerprod.2001]

Just got on this Channel and i gotta say Awesome Video^^ I actually See the MS Prime for the First Time xD And after Seeing it i actually prefer it a bit more than TE-01 Well i will have to think about it more to decide which one i get. Definitley will Stick around and watch some of your other Videos^^

[@matineyang]

I had the Ms and Te. I have to disagree with Bobby. The TE definitely has the better presence. It’s why both kids and his wife pick it out of the two. TE’s proportions works better in relation to MP36. (Smaller upper body to leg length and width). As far as materials I just keep asking myself if the build was switched meaning if MS had TE’s build would the transformation be a bear? And vice versa. I think if TE used the same plastic all around as MS, its transformation would break the thing in half.

[@robots1]

No his wife did not pick Te as the one she liked. She just said it was heavier...

[@matineyang]

@@robots1 just rewatched the review and we can't even tell which one she pointed to because of the angle.

[@luchajon8480]

Light of Freedom has a double jointed elbow. The second joint is just very tight.

[@g52official24]

I went with TE and i love him. I see some people putting mp-10 head on TE and it looks great. MS is too chunky imo.

[@dino2346]

Transform element hands down wins because of the robot and truck modes looking actuate and great.

[@AssaultRider555]

I prefer function over form, thank you very much.

[@PixelKappa_HD]

I preffered the Magic square on sculpt alone but it's nice to see that it also has the better articulation and less cumbersome transformation.

[@Thor13332]

I prefer magic square. I'm not a stickler for a complete cartoon accurate version. His looks varied per episode anyway.

[@islipcocoliso]

This helped me decide which order to get them in ( as opposed to which to get instead of the other)...Magic Square, THEN Transform Element..on a bit of a note, there have been times where Optimus had the gray stripe in truck mode in the animation ( very rare but in at least one episode that was how he rolled)...I do like the no stripe look of TE ...great job as always.

[@Heavensrun]

You say the secondary hinge on the magic square elbow is meaningless, but combined with the primary hinge (which gives you 90% of bend) when the "meaningless" elbow rotation is in the right direction, the two together give you a full range elbow bend that goes further than the TE version.

[@MurdermiesteR]

You missed the double joint on the MS elbow for the full range.

[@chickensouplover516]

definitely caught the profile pic snuck in around 18:00 ;)

[@JoeyFinnell84]

Claims he's judging them based on an unbiased opinion, but continues to give MS the points based on his personal preferences... alright then.

[@dankmemer2774]

An unbiased opinion is still an opinion nonetheless which by definition comes his personal preferences. The “unbiased” part means be is sponsored by neither MS or TE and that he won’t benefit by putting one above the other. Because when it comes to an objectively standpoint, both are so close that the only thing that‘s really the deciding factor is your own subjectivity and what you prefer in an optimus figure.

[@jeremynelson7920]

I love the TE cartoon accurate look, transformation, all red truck, the non yellow coloring on the forearms, the fact that the Matrix has a "door" hiding it and the paint on the pelvic region and thighs. The one thing that I'm iffy about is that he is taller than Megatron. Still for me it's TE for the win! I hope I can get one soon.

[@jonathanb1987]

To anyone looking at the TE-01, the MP-44/Movie Head is included with TE-01 OP Leader version 3.0 and the teeth ratchets are spaced closer together. I own two of the TE-01 because I wanted to customize one of them. I also own two Magic Square figures, MS-01X Light of Freedom (Metallic) and MS-02EX Light of Peace. After owning and messing with all of them this is how I would put it. If transforming a figure is important to you get TE-01 OP leader Version 3.0. The plastic is very durable and can stand up to multiple transformations without the plastic feeling fatigued or brittle. The Magic Square plastic just doesn't feel as good when transforming the figures. If you want a more realistic but striking Optimus Price, get MS-01. Like Bobby said he looks beefier. He looks like a strong commander. He is also more articulated than TE-01. If you value articulation overall get MS-02EX. The EX version has the best finish but it isn't paint. The figure has paint embedded into the plastic giving it a painted look without the worry of paint chipping. I, however, do think painted over plastic looks better like Fans Toys does their figures. Paint infused plastic is a good alternative though. The articulation on MS-02 is the best out of the three and I was even able to get MS-02 into a crouching pose. MS-01 can do it but it doesn't look as good because that version of the character should look more imposing. Honestly I enjoy and display all three on different shelves that make each one shine.

[@NearingLostLight]

3:55 oh my god I thought I was the only one who thought the mere idea of turning your toys joints 180 was a stupid idea.

[@thirty3255]

I think that TE is way more appealing in the can back area in alt mode (the trailer hitch area). MS is downright goofy in this area (just like MP10). Very good comparison video.

[@tazman66gt18]

As it's been stated before, especially with Hoodlum, companies add diecast for that heft and the "illusion of quality" because it is heavier. Not saying either piece is good or bad because of it but, in my opinion, companies just add weight to a figure as a marketing gimmick.

[@kazuraba3991]

Oh i would have waited an eternity for this

[@paulgraham4567]

It's over Prime.

[@0anesthetic4u70]

The second hinge on the magic square is not redundant. 1 it's in a more natural location then the other, and 2 the two hinges work together and get you the full curl.

[@mikejszekely]

While everyone argues over which minute detail makes their choice the best choice I'm thinking it's fantastic that we live in a time where our choices for an MP Prime are all so good that the choice is down to minute details. But yeah, I went with MS, for pretty much the same reasons as Skullface.

[@SoundwaveSuperior80]

Just for the record: nice necklace. I imagine one of your daughter made you wear it. I have a six year old girl and I get stuff like that thrown at me all the time.

[@fragginbastich7307]

Good job Bobby. I like how I knew your preference but didn't see it creep in for the objective issues. This decision was probably the most fence sitting I have ever done before landing on TE. Glad I went that route but really wish to head was the MS one.... and those knee swivels....

[@aboredscotsman4280]

if you were to merge both ops together you probably would have the perfect prime :D I went for the magic square version myself as to me it had more personality and charisma than the TE version, but im sure both versions will be the superior to the overly priced MP 44 :D

[@bobby101a]

Bobby I like the way you are approaching reviewing . I think you should possible use Skullface points a scale 1-10 . Paint, Sculpt , Engineering, Astatics, & Media accuracey . Plus the pros and the cons. Good review man!!

[@MantisNineNines]

I prefer the MS too, would literally never buy the TE at any price, but this video made me realize something. If someone is attempting as objective a measure as possible, intent matters. Like on a cooking show or whatever, where no matter how good the steak is, Sorry Sir But We Asked For A Soufle. And the TE is ABSOLUTELY closer to the cartoon. Of course, that's what I don't like about it, but impossible to not credit objectively. And you're right, a screen cap exists for everything, but if we're real, that TE looks like 90% of what you'll see on screen. So if a collector is looking for an improved/replacement MP10, MS is perfect IMO, but if the goal is a cartoon accurate MP collection, TE nailed it. Anyway, great vid, appreciate the hard work.

[@cthuludreams1]

As far as these two primes go, I wish I could bash elements of both into one super figure. Magic Square beefiness and hardware with TE matrix chamber and fuel tanks on the legs.

[@iamtheomnimonkey]

This is how I feel 9 times out of 10 when we get 2 or more versions of a character.

[@opsimathics]

I'm leaning towards TE because of cartoon accuracy and complex transformation, both which are high on my list of stuff to care about. Neither nails the paintwork the way I would prefer, but MP-10 didn't either.

[@anongotlyrics]

Not getting either but a great breakdown of both. What were u going to do instead of this I think I missed that part.

[@Trikeboy2]

I picked up Transform Element. Nothing against Magic Square but it looks too similar to MP-10, which I already have. TE offered pretty much a new experience. Also, since I may have to cancel my MP044 order, I wanted something more show accurate which TE does nearly perfectly. I also got the v2 head which is much better. I am considering the Magic Square mould for Nemesis Prime though. I prefer "mould mates" to look a little different. The beefier Magic Square will help him look more like a Decepticon.

[@eeiko321]

Glad I watched this, I personally prefer the TE-01 by far. And the new ones apparently have the updated head sculpt

[@bricksandplanes2580]

Enjoyed this video so much!! Thanks Bobby!

[@rdsaplala]

The MS version has a super accurate ab crunch because it demonstrates that too much ab crunching will expose Prime's spine LOL

[@travissjostrom8064]

Bobby, can you do an updated versus of the MS01X+ and TE-01 Cell shaded?

[@keithhunt8]

I have the Transform Element. It comes with two different heads, one more season 1 and the other more of a season 2 look. Apparently the spacing between the eyses changed.

[@NerdyTransformed]

I also think MS is similar to Open and Play, encouraging messing around with the figure without worry of paint chipping

[@CardboardBots]

Booth look nice, but not worth switching out MP10 for. I would like to see both companies do repaints for these though. Magicsquare could have an impressive SG Prime.

[@doge9455]

From an outside perspective i prefer the buff more leadee looking ms also i have never experienced the mp 10 tranformation and i do prefer the ms transformation but one thing i preder on thr other oneis the no wind sheild wiper

[@artrendon6101]

JUST picked up a Magic Square Prime. I feel a lil better about my choice after seeing this vid, even though it's got a few years on it.

[@MrUniq]

Thanks for coming through on this my g

[@segreen607]

Good analyzing both products. I too like MS over TE (slightly), but you cant go wrong with either so I got both.

[@jackcinephile7554]

Can we celebrate the fact that we finally have a masterpiece-style Optimus Prime that doesn't cheat with a fake grill?

[@_V.Va_]

No.

[@_V.Va_]

No.

[@brianharris5446]

Thanks for this! So close to pulling the trigger on the TE but holding out for some news about their updated version.

[@kinjapleb4228]

There is going to be an updated version?

[@brianharris5446]

@@kinjapleb4228 I think I heard there might be a v2, but it seems like there is a designer that is making a replacement head that is more like Magic Square's sculpt.

[@8474Starscream]

The Producers Producer strikes again. Skullface on a Saturday morning is like having pizza & a pitcher of beer .....nothing wrong with that!

[@jordanharrington1890]

I'm curious to see how you will view the MP-44 because TE0-1 and MP-44 have MUCH in common

[@therealspaceninja27]

Toe tilts make for instability. They look cool for posing though. Too bad their isn’t a method to lock them until needed.

[@tanjackwee4707]

I prefer Magic Square as transformation is more simplicity.

[@joshuasizemore9143]

I’m realizing more and more that I appreciate stylization more than pure cartoon accuracy. I actually like Mightron or Despotron more than mp36 there’s just something off to me

[@lysist]

I think "Head to Head" comparisons should be there own thing. SDSs are great when they are news, opinions, overviews, historical stuff etc. Just my opinion though.

[@davidez4640]

Great comparison, and great episode as ever.

[@daniellopez8330]

Hello Bobby. I love both but in terms of quality I think TE-01 has more die cast, the plastic is more solid,I prefer the long biceps, the stomach grill is more cartoon accurate, the Cannon lights up. This is the one I’m waiting to buy. But I prefer de magic square head-sculpt, the chrome in the grill and smoke stacks, the transformation is simpler, but the plastic is lighter for me that’s a bummer, the Matte paint is not for me. The beefy looks is more like they go for MP-10 than the actual cartoon. The lack of die-cast is a Nono for me. But magic square joints are better and better articulation not for much but better. But that’s my opinion. Another thing, Takara prices are killing us now, $120 for bumblebee 2.0 and almost $500 for Optimus fells like Takara wants the competition to make K.O. With that amount you can buy a soul of chogokin DX great mazinger or 2 hot toys. I know some people hate k.o’s but Takara is to blame. Later Bobby love your channel peace🤘🏽

[@Tubes78]

I've bought both but sold the MS. I just like the whole TE ecstatic more. It looks more like the cartoon. The MS has the better HS.

[@PrinceTrunks26]

I have both, and both are amazing figures. I like both for their differences.