Loving the content brother 💪🏿💪🏿. Definitely make a video showing the condition of your rod bearings. Not a lot of f10 videos on that topic.
@BimmerHausPerformance2 жыл бұрын
Will do and I appreciate it!
@Musclesmarinara2 жыл бұрын
Watched this video on the forum...nice work kid!!
@95blkmax2 жыл бұрын
yeeea boiii love the detail! thank you for sharing
@BimmerHausPerformance2 жыл бұрын
Your intake is coming soon!!! I promise... LOL
@cameronaragon64922 жыл бұрын
great video, you showed me that I don't have to drop the motor to do this!
@BimmerHausPerformance2 жыл бұрын
That’s right!
@JohnsonMotorsports2 жыл бұрын
Awesome!!!!! Love the video!!! Your car is a monster! Great walkthrough!!!
@BimmerHausPerformance2 жыл бұрын
Thanks Grant!
@Jayanit2 жыл бұрын
I subbed. Would be great to see more videos. Thanks for posting.
@BimmerHausPerformance2 жыл бұрын
Thanks! I appreciate the encouragement... it's hard to gage how helpful these videos are so the feedback is appreciated!
@amayaspring Жыл бұрын
Siiiiick....
@shmoonasghar8022 жыл бұрын
Great work 👏
@BimmerHausPerformance2 жыл бұрын
Thanks man! I am about to do a valve cover… we’ll see how it goes, otherwise I’ll be doing this job again cause I am smoking like crazy?
@RealPStakks7 ай бұрын
🔥🔥
@jakesentman29722 жыл бұрын
I did my my turbo smart blow off value without removing water pump and It was hands down the worst thing I’ve ever done
@BimmerHausPerformance2 жыл бұрын
I did the same, recorded it all, and was so freaking frustrated I didn’t even want to edit the video, 😂 it is possible but I would agree very difficult!!!
@mr.kellyman8306 Жыл бұрын
what happened 3:55
@BimmerHausPerformance Жыл бұрын
I probably hit my head… lol most likely- it happens
@agamersimprint5658 Жыл бұрын
What website will tell you the torque specs of each nut
@bimmerhause77982 жыл бұрын
Dude haha my name is also Bimmerhause in the Netherlands
@KingRoyalTV Жыл бұрын
Nice! Just subbed. Where did you get your 4 point engine support bar?
@BimmerHausPerformance Жыл бұрын
Harbor freight
@KingRoyalTV Жыл бұрын
@@BimmerHausPerformance Thanks! Thought they only had a 2 point. I’ll have to check again haha.
@KingRoyalTV Жыл бұрын
Oops just saw that your chassis braces are red so looked like a 4 point at an angle 😅
@Workin2472 жыл бұрын
Nice job on the install. I was thinking about getting the pure stage 2 for my f10. Did you upgrade the high or low fuel pumps? Also what tuner did you use?
@BimmerHausPerformance2 жыл бұрын
I have done the lpfp but it is not required for the ps2. I am tuning with David Shoup. He is the best.
@Twin_solo_az2 жыл бұрын
I have the same plate number in a different state.
@BimmerHausPerformance2 жыл бұрын
Just please don't tell me you live in FL, I need to get this plate down there! LOL
@Twin_solo_az2 жыл бұрын
@@BimmerHausPerformance not Florida no worries.
@vtl-ltnvsk Жыл бұрын
Nice build! Do you have any info about times? 100-200, 402, 0-100 may be?
@BimmerHausPerformance Жыл бұрын
I am currently tearing down the motor and doing a big turbo build. Check out my channel for the latest video. As far as the PS2 It was roughly running in the 12’s. Remember I am a 6sp so slower shifts as well as I had a tough time getting traction off the line!
@2CAINEF3X Жыл бұрын
Custom tune or OTS in the vid?
@BimmerHausPerformance Жыл бұрын
Custom Tune by David Shoup
@finkenf109 ай бұрын
Is this much harder on an F10 535i with drive?
@BimmerHausPerformance9 ай бұрын
X drive? You might need to drop the sub frame but it is not a big deal
@jasonmartinez3174 Жыл бұрын
How long did the install take you? Not sure if you said it in the video I not have missed it if you did
@BimmerHausPerformance Жыл бұрын
I work on these things on the side, so it is hard to say, if you were 100% organized and ready to go, no snags it could be done in a day give or take…
@SniperGang70275 ай бұрын
DID YOU TUNE IT???
@BimmerHausPerformance5 ай бұрын
Yes I did
@georgemiami86042 жыл бұрын
Where did you get Your turbo inlet ? I have f06 640i grancoupe ..
@BimmerHausPerformance2 жыл бұрын
I built it, I'm about to release an install video. Give me a sub to stay up to date or check out my insta @bimmerhausperformance Thanks!
@muhammedq9109 Жыл бұрын
I'm in the market for an f10 but they all high miles ,, do you recommend buying a high mileage f10 ? Also does the m sport package add anything to the car besides the looks and the interior? Appreciate your videos and will follow your pasta once I find the right car
@BimmerHausPerformance Жыл бұрын
MSport has some advantages on looks but if you find the right car you can do all the upgrades over time. As long as it has good maintenance history you should be good to go. If you do have high mileage I would do rod bearings for sure as peace of mind.
@muhammedq9109 Жыл бұрын
@@BimmerHausPerformance how high is too high? 200k ?
@BimmerHausPerformance Жыл бұрын
@@muhammedq9109 that is a lot, but just depends on the car, and your budget.
@wesleypork95472 жыл бұрын
Where are you located the attention to detail and care I want my turbo upgrade done by you
@BimmerHausPerformance2 жыл бұрын
Thanks! I am in Chattanooga TN. Where you at?
@logielogful Жыл бұрын
I’m in Alabama I’ll make that drive
@BimmerHausPerformance Жыл бұрын
@@logielogful DM me on insta @bimmerhausperformance or email me BimmerHausPerformance423@gmail.com
@boosttapperformance86732 жыл бұрын
What’s hoist you have that fits in your home garage?
@BimmerHausPerformance2 жыл бұрын
If you look at my videos I did one awhile back on the lift, install and all. It is a lot cheaper than people think! Just work to get it installed!
@Freakyybmw2 жыл бұрын
Hey, my WasteGate is set at like 12inch closed. Is that right?? Been chasing a “low boost pressure” issue & I think that’s the problem. I’m at 97% wgdc with 17psi
@BimmerHausPerformance2 жыл бұрын
Yes sir that could very well be the issue. As stated in the video at 7in mine is completely sealed. Highest recommended I have ever heard was 9in so 12 is very high. Let me know if that fixes it!
@Freakyybmw2 жыл бұрын
@@BimmerHausPerformance Would you also happened to know the oring size for the turbo smart bov?? It’s also leaking, thought that might be a issue too.
@BimmerHausPerformance2 жыл бұрын
@@Freakyybmw I do not know, but I’m sure you could order it directly from them!
@jakethomas6085 Жыл бұрын
I’m thinking about doing this to my 2013 I’m fbo with a jb4 I’ve got upgraded spark plugs but that’s it internally. Could I leave my internals stock for this?
@BimmerHausPerformance Жыл бұрын
100% internals are good on the n55 up to 750whp. There are guys running up to that much!
@Jet3ch Жыл бұрын
About how much power?
@BimmerHausPerformance Жыл бұрын
Right now high 475-500 on pump gas, shooting for 600 on E and meth.
@Jet3ch Жыл бұрын
@@BimmerHausPerformance Thats awesome, did you have to upgrade fuel system or just FBO and pure turbo stage2 ? I'm in the market on buying an F10 n55 but was wondering on getting an F30 N55 instead because of the 500 pound lighter difference, you think that weight plays a major part? Nice build.
@BimmerHausPerformance Жыл бұрын
@@Jet3ch I think at the end of the day the n55 isn't gonna be a drag car so I would buy what you like and not worry about weight. The f30 might be a bit more nimble but the f10 is going to be a nicer driving car and probably better features. Here is my list of mods to the motor as of right now: MHD Custom Tune David Shoup BimmerHausPerformance Intake BMS Oil Cooler valve and cap VVT Coolant Flange FTP Boost Pipes PS2 Turbosmart BOV Hellcat 535 lpfp Spool helix OD 3x BIM ECU canbus fuel analyizer Armytrix catless downpipe armytrix full exhaust with valves Catch Can B58 Coils 1 step colder plugs 550 clutch and pressure plate S55 oil pan S55 oil pump Single mass lightened flywheel Sprint booster pedal tune UUC short shift kit Clutch delay valve delete Clutch stop rubber Front seal guard Poly carrier bearing for shift linkage Snow Meth Kit stage 2.5 7.5 gallon meth tank Meth SS lines Spool 10 micron fuel filter
@Jet3ch Жыл бұрын
@@BimmerHausPerformance Awesome, thanks for response!
@dailybricks48322 жыл бұрын
How much HP?
@BimmerHausPerformance2 жыл бұрын
Current set up on pump gas is 500 whp, after methanal and e50 tune, looking for 600.
@martinsuter3240 Жыл бұрын
do you dont need to upgrade the hpfp? thanks
@martinsuter3240 Жыл бұрын
do you intall the stage1 hpfp?
@BimmerHausPerformance Жыл бұрын
I am a 2011 pre LCI set up so I have the old n54 continental fuel pump. I just installed a helix overdrive 3x and spool 10 micron filter. Video coming sometime this year... maybe lol.
@martinsuter3240 Жыл бұрын
@@BimmerHausPerformance thanks. do you now were i can find a hpfp upgrade for my bmw f10 535i 2011
@BimmerHausPerformance Жыл бұрын
@@martinsuter3240 Yea, hit me up on Instagram @bimmerhausperformance and I'll send you some links.
@martinsuter3240 Жыл бұрын
@@BimmerHausPerformance ok thanks
@DJ-lc1en Жыл бұрын
Great content! Question I have a 11 535i xdrive and I'm going to install a pure stage 1 any advice on how to tackle it? Do I need to tackle it from front and back or could I just install from front? Or water pump side. I want to try to do it without removing the subframe. Any advice would be much appreciated! Thanks!
@BimmerHausPerformance Жыл бұрын
Thanks! I would think you would want to remove the turbo, do the swap, then reinstall. So it would be similar to this.
@DJ-lc1en8 ай бұрын
Just wondering about the PS2 turbo what boost were you able to get to? And what boost did it carry to redline? Thanks.