Narrowboat engine post bedding in maintenance (Lister SR2)

[@nateuk2542]

Best video Lister valve setting video on KZbin This as helped me a lot Thank you

[@delticman]

Thanks for enjoying the video glad it helped you

[@MrUmpleby]

I always mark and back head nut/bolts off 1/4 turn then retorque in one movement otherwise you're just torqueing against the inertia/stiction

[@delticman]

Thanks for the tip , currently rebuilding a Lister TR1 generator I'll impliment this when I refit the head 😊

[@hamradiofun5527]

Very informative video.

[@delticman]

Thanks dad , got some more on the wqy

[@roxylass1]

Could you possibly let me know the number stamped on top of your oil dipstick fantastic work btw

[@delticman]

Yes I will let you know shortly

[@delticman]

Thanks very much

[@jimclarke6129]

hi , what are the ports on the top of the inlet manifold for as the engine in my dumper truck has no caps for the ports , it runs fine but i am concerned as to why they are open ?

[@delticman]

Hi , they're used to pour a small amount of oil into the cylinder via a the air intake , this is used to aid compression for difficult starts , earlier models have a exposed screw head and the later ones (this one) has them deeper recessed and covered by rubber bungs