Narrowboat Panel Painting - Part Three, Undercoating

[@NT-eh6om]

Looking forward to the next one!

[@colinstobbart599]

When are you starting the assisted painting course again?

[@Polecat54941]

I have not got a narrow boat but I do have a van :)

[@llessibm]

Thanks for this, when you said that before starting the next coat you would wipe the surface down then I assume that this is just a dry wipe to dust off any particles that might have settled or do you wipe wipe a solvent or cleaner ?

[@JohnbarnardBiz]

Yes just a clean cloth or tact rag

[@fleabagsinmyeyes]

Very helpful series - one question; you mentioned Multi 40 paint is best for gunnels and roof, I’ve tried to google this but nothing comes up! Does it have another name? Thanks!

[@carolbarnard8906]

hi the product is Epifanes muti-forte hope this helps

[@fleabagsinmyeyes]

Brilliant, thank you Carol

[@paulshrew]

Great videos John. Do you have to sand down between 1st and 2nd coats or sand after all 3 under coats are on? I’ve only 240 sand paper, that ok?

[@JohnbarnardBiz]

No need to sand between coat as long as you don't exceed overcoating time chech the data sheets and they will let you know how long between coats at different temperature

[@mickandlin]

Great videos John, do you leave the same masking tape on for all coats of paint when painting coachlines or change it inbetween coats, and what tape do you use/recommend

[@johnbarnard4146]

hi yes same tape for all coats tessa tape

[@billwatson2032]

Hi John. I will be useing the same undercoat, is it to dark for bright red, or do I need to use the white undercoat. B Watson.

[@JohnbarnardBiz]

The blue grey pre kote will be fine

[@billwatson2032]

@@JohnbarnardBiz thanks very much John, I have tried white and pink undercoats, not very good. b Watson.

[@scouseboater3294]

WHERE ARE YOU SITUATED ON THE CANAL AS I HAVE WATCHED YOUR VLOGS AND LIKE WHAT YOU DO

[@JohnbarnardBiz]

Leicester arm of grand union

[@scouseboater3294]

THANKS

[@ljpeng3473]

"they're not expensive... £150" emm 🙂